2009 Dodge RAM 1500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › RAM 1500 › 2009
These records cover every 2009 Dodge RAM 1500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2009 Dodge RAM 1500. Newest first.
Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009…
Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.
Chrysler is recalling certain model year 2009-2010, Ram 1500 and Dodge Dakota trucks, manufactured from July 1, 2009, through November 30, 2009, because the rear axle pinion nut may loosen due to a lack of adhesive.
Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
Chrysler will notify owners, and dealers will install a pinion nut retainer, free of charge. The recall began on June 17, 2013. Owners may contact Chrysler at 1-800-247-9753.
Owner complaints
670 complaints29 involved a crash2 involved a fire19 injuries
What owners report most
Latest complaints
- Air bags
Involved in an accident 2/09/26. Air bag did not deploy. Fractured sternum as a result.
- Power train
- Week of October 6th 2025 I experienced 4-wheel drive issues and lights. - October 13th 2025 dropped off to dealer for review - October 14th 2025 dealer deemed not safe to drive and ordered parts under warranty repair. - following weeks went on with parts being backordered. - after having to push…
- Week of October 6th 2025 I experienced 4-wheel drive issues and lights. - October 13th 2025 dropped off to dealer for review - October 14th 2025 dealer deemed not safe to drive and ordered parts under warranty repair. - following weeks went on with parts being backordered. - after having to push the dealer for updates for weeks on December 22nd 2025 I informed Stellantis Customer Service US. - Customer service looked into and gave me the same delayed responses for weeks now "I hope you're doing well. I'm following up regarding your case. There is no definite ETA for the part. Our parts team is working to get it expedited. I will receive another update in 5-6 business days and will follow up with you then. If you have any questions please don't hesitate to contact me." - Still today Stellantis cannot give me a date when my truck will be repaired. Near 4months later...
- Visibility › Defroster/defogger/hvac system
The contact owns a 2009 Dodge Ram 1500. The contact stated that while driving at an undisclosed speed, the MTC unit failed to function as intended. The contact stated that while the system was enabled, the system independently switched between the heating and cooling systems. In addition, the…
The contact owns a 2009 Dodge Ram 1500. The contact stated that while driving at an undisclosed speed, the MTC unit failed to function as intended. The contact stated that while the system was enabled, the system independently switched between the heating and cooling systems. In addition, the defrost system was deactivated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced an unknown recall; however, the VIN was not under recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 158,000.
- Exterior lighting
The left turn signal not working properly. When I put my left turn signal the amber light front of the truck not working instead the high bean works as turn signal also amber running light not working. Is so frustrating getting pulled over by a cop for that reason!!!
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2009 Dodge Ram 1500. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 131,000 and at the time of registration, it was discovered on the title that the mileage was 211,492.
- Unknown or other
Carfax got the wrong mileage 1 have 185292 and I can send pictures
- Electrical system · Fuel/propulsion system
Heating & ventilation, I have lost heat in my truck, issues with fuel pump/filte where truck won’t start, and had the water pump had to be replace. I believe the majority of the things listed had recalls. What is included in the recalls and can a recall be replaced more than 1x?
- Electrical system · Fuel/propulsion system · Power train
My trucks ignition switch just stops turing my truck on I've seen multiple complaints about the same issue leaves you stranded
- Fuel system, gasoline · Structure
The contact owns a 2009 Dodge Ram 1500. The contact stated that upon inspecting the vehicle, it was discovered that the fuel tank was not completely secured to the vehicle and was hanging down from the subframe. The failure was caused by a corroded subframe attaching the fuel tank straps to the…
The contact owns a 2009 Dodge Ram 1500. The contact stated that upon inspecting the vehicle, it was discovered that the fuel tank was not completely secured to the vehicle and was hanging down from the subframe. The failure was caused by a corroded subframe attaching the fuel tank straps to the vehicle. Both fuel tank straps had failed due to the subframe corrosion. The local dealer and manufacturer were notified of the failure, but no assistance was offered. The contact was informed that the VIN and vehicles from the state of Kansas were not included in NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 149,000.
- Air bags · Fuel/propulsion system · Power train
the shifter began changing gears on its own. Before the recall came out my mechanic checked and there was no recall for this until 2018. I was never notified of the recall. Then on rear axle pinion nut. The nuts were installed without the proper amount of adhesive. Consequently, the nuts can…
the shifter began changing gears on its own. Before the recall came out my mechanic checked and there was no recall for this until 2018. I was never notified of the recall. Then on rear axle pinion nut. The nuts were installed without the proper amount of adhesive. Consequently, the nuts can loosen, and cause the rear axle to lock up, causing a loss of vehicle control. I was never notified of and the rear end came down while on the freeway. The fuel tank began leaking I repaired this before the recall came out. I submitted a reimbursement request they denied me stating my car was over 7 years old.
- Fuel/propulsion system
Gas tank straps causing fuel tank to drop from under truck. The Chrysler recall 18V160000 or U04 covers this problem but they tell me my VIN is not included in the recall.I live on the Outer Banks of NC and we at times have salt water standing on the side of the roads.and this is the same problem…
Gas tank straps causing fuel tank to drop from under truck. The Chrysler recall 18V160000 or U04 covers this problem but they tell me my VIN is not included in the recall.I live on the Outer Banks of NC and we at times have salt water standing on the side of the roads.and this is the same problem in this recall. I am Deputy Chief of the local fire department and we have 4 of the trucks and all have the same problem also. My truck has 150,000 miles on it and is well taken care of. This truck has a NC DOT inspection every year.
- Service brakes
The brakes locked up twice since purchased the vehicle. The left side locking up would have caused me to veer into oncoming traffic. Years late when the right side locked up would've have veered right causing an accident. This last time the brakes aren't releasing. This happening 3 times has…
The brakes locked up twice since purchased the vehicle. The left side locking up would have caused me to veer into oncoming traffic. Years late when the right side locked up would've have veered right causing an accident. This last time the brakes aren't releasing. This happening 3 times has reproduced itself. The 1st time I took it to a dealership. No warning lamps were showing or any symptoms for this happening. I've purchased the lifetime warranty on this vehicle.
- Unknown or other
The rear axle pinion nut came off and the rear axle locked up. Driveshaft dropped to the street, breaking the transfer case. Incident resulted in an immediate loss of control. Driver behind me saw the driveshaft fall and braked to avoid contact with my vehicle. Luckily, I was driving about 25…
The rear axle pinion nut came off and the rear axle locked up. Driveshaft dropped to the street, breaking the transfer case. Incident resulted in an immediate loss of control. Driver behind me saw the driveshaft fall and braked to avoid contact with my vehicle. Luckily, I was driving about 25 miles per hour and was able to come to a stop on the roadside without wrecking. I later learned that in late 2015, Chrysler was supposed to notify owners of the defect concerning the rear axle pinion nut. I never received that notification or any other recall notice regarding my vehicle. The local Dodge dealer has told me to have my vehicle towed to them. They said the damage will be evaluated and Chrysler will determine if they should pay for the necessary repairs. I believe they should, since I was never notified of the problem with the rear axle pinion nut. The consumer stated the District Manager at the dealership refused to repair the vehicle. The reasons for not repairing the vehicle were the necessary parts couldn't be found, the recall was too long ago, and you should have brought it in for repairs earlier when the recall notice went out.
- Structure › Frame and members
The contact owns a 2009 Dodge Ram 1500. The contact received notification of NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline). The contact stated that the sub frame was rusted. The vehicle was taken to the dealer and to Hudson Chrysler Jeep Dodge RAM (625 NJ-440, Jersey City, NJ 07304) on…
The contact owns a 2009 Dodge Ram 1500. The contact received notification of NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline). The contact stated that the sub frame was rusted. The vehicle was taken to the dealer and to Hudson Chrysler Jeep Dodge RAM (625 NJ-440, Jersey City, NJ 07304) on two separate occasions and the dealers declined to perform the recall repair because the sub frame was rusted. The manufacturer was made aware of the failure and informed the contact that he was responsible for the sub frame replacement. The failure mileage was 165,851. Case number [XXX] . INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).”
- Suspension
Had truck in for service at the local dodge dealership. Was informed that the frame was severely rusted through and was unsafe to drive. The truck has 80,000 miles on it garage kept. This shouldn't be happening on a 12 year old vehicle. Contacted dodge and was assigned a case number 79046014. However I was told by them sorry for your bad luck. Nothing to be done here. I find this unacceptable. Thanks for any help
- Electrical system · Power train
TL* the contact owns a 2009 dodge RAM 1500. The contact stated while driving 30 mph, the vehicle loss motive power and stalled. The contact had the vehicle towed to bluebonnet chrysler dodge (547 s seguin ave, new braunfels, tx 78130) to be diagnosed. The contact was informed that the failure was…
TL* the contact owns a 2009 dodge RAM 1500. The contact stated while driving 30 mph, the vehicle loss motive power and stalled. The contact had the vehicle towed to bluebonnet chrysler dodge (547 s seguin ave, new braunfels, tx 78130) to be diagnosed. The contact was informed that the failure was an electrical failure and an unknown module failure. The vehicle was repaired however, the failure recurred after several months. The vehicle was towed back to the same dealer however, the vehicle was not diagnosed nor repaired. The manufacturer was not made aware of the failure. The failure mileage was 198,000.
- Power train
In 2020 my 2009 dodge RAM 1500 4X4 began chucking and lurching when cornering. I parked the truck at home and had it towed to the shop. The mechanics pulled the rear axle apart and found shavings and large chunks out of the pinion gear and subsequently many of the other gears and components in the…
In 2020 my 2009 dodge RAM 1500 4X4 began chucking and lurching when cornering. I parked the truck at home and had it towed to the shop. The mechanics pulled the rear axle apart and found shavings and large chunks out of the pinion gear and subsequently many of the other gears and components in the rear axle. The mechanic said I was lucky it did not lock up while driving. Being that I purchased it used dodge did nothing to help me. My after market warranty was out, so I had to pay over $2,200 out of pocket to have it rebuilt because dodge stopped manufacturing the axle assembly of the 3.92 gear ratio. I got it back and drove it minimally for the past six months. Today 3/16/2021 I decided to drain and refill the rear axle with the specified dodge lubricants. While draining the axle fluid I found a shard of metal approximately 1" x 1/8" x 1/16". Very disappointed. Now I am looking at another $2,200 rebuild and the loss if my vehicle again for several weeks. This IS a safety issue and dodge needs to issue a recall to all dodge owners whom this affects, not just original owners. I have repair reciept ducumentation if needed.
- Electrical system
The key falls out of ignition while driving ,also the shifter can be moved without key in ignition it IS the same problem as 10v200000 recall but my truck isn't included in recall search but it should, I know dodge retooled in the middle of the 2009 year and the parts on my truck match a 2010 year…
The key falls out of ignition while driving ,also the shifter can be moved without key in ignition it IS the same problem as 10v200000 recall but my truck isn't included in recall search but it should, I know dodge retooled in the middle of the 2009 year and the parts on my truck match a 2010 year model for which the recall IS intended.this IS a dangerous situation that isn't being addressed by seemingly a clerical error.
- Electrical system · Engine
While driving my truck it just shut off, died and would not start back up. This was very dangerous! Going 65 miles an hour, in the center lane trying to get over to the side of the road...safely! I tried to start the truck...everything came on as normal, but would not crank. I had to have the truck…
While driving my truck it just shut off, died and would not start back up. This was very dangerous! Going 65 miles an hour, in the center lane trying to get over to the side of the road...safely! I tried to start the truck...everything came on as normal, but would not crank. I had to have the truck towed $$. The alternator was replaced $$. Truck still would not start. It would not crank, you could hear clicking under the hood and you could hear the fuel pump come on. I was told it was the win module which cost me $870.00!! (Win module and programming) evidently this IS a common problem with dodge trucks. What does it take to have a recall on this part?!! Does it take a certain number of crashes or deaths? All in all it cost me about $1500, but it could have cost me my life, my girlfriends life, and possibly people in other vehicles that were driving around me. I have researched and found that other dodge vehicles were affected with this faulty part and there was a recall put out. There again, I ask dodge....what does it take to have a recall on this part for RAM 1500 trucks?? I hope that all owners that had or IS having this problem to file a report! Please! Read all the discussions similar to mine on dodge forum. Again, please report these types of problems, they will not know how may vehicles are affected if it's not reported. you may save someone's life.
- Electrical system · Exterior lighting · Power train
The vehicle dies and everything becomes disabled including all outside lights including the emergency flashers. engine turns off and then will no restart. sometimes this problem IS intermittent but later completely fails. This IS the second time in 2 years that this truck has died. The first time…
The vehicle dies and everything becomes disabled including all outside lights including the emergency flashers. engine turns off and then will no restart. sometimes this problem IS intermittent but later completely fails. This IS the second time in 2 years that this truck has died. The first time it happened on a foggy night. Th engine and all lights turned off at cruising speed leaving only some instrument cluster lights on which ends up bein even more of a distraction from the sudden outside darkness. after trying to find the side of the road in the darkness, then your emergency flashers do not work leaving the truck just a dark target in the road. This IS extremely dangerous. recently this same truck died a second time but thankfully after filling up a a gas station. After a quick search online, this has happened to many many dodge RAM owners from 2009 to 2016 maybe newer vehicles and also other models. the dealer refers to the problem being with a totally integrated power module (tipm). I just read that there have been many complaints filed already even with the nhtsa. please continue to investigate, this IS a major safety issue.
- Unknown or other
Clicking noise under dash even when the truck IS off, no heat, steaming up window, checked heater core and its good had the whole system flushed. Still not rite. Also cruze control not working.
- Seat belts · Seats · Structure › Body
Seat belt will not stay latched
- Unknown or other
The heater does not work and I was told by dodge dealer mechanic that the main housing unit door for the heater and ac usually breaks.
- Electrical system
Tipm failure-totally integrated power module abruptly failed with no warning signs or nothing.. I took it in light to light systems not working.. Windows, headlights, this IS hazardous for drivers.. Called the dealership and was told there IS no recall nor has there been a prior issue.. They…
Tipm failure-totally integrated power module abruptly failed with no warning signs or nothing.. I took it in light to light systems not working.. Windows, headlights, this IS hazardous for drivers.. Called the dealership and was told there IS no recall nor has there been a prior issue.. They said my vin number [xxx] has no recall they fixed the hvac I was in motion on a highway.. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *tr
- Engine
Exhaust manifold bolts broken. Causes ticking on start up. Its bad on your engine and it won't pass emissions. How has an investigation not been done on this?! So many complaints on forums, facebook, even on here. With less then 80K miles this IS ridiculous
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Totally Integrated Power Module Failure
In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007…
In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher complaint rates related to fuel pump relay (FPR) failures than other subject vehicles. In a September 3, 2014 letter to NHTSA, Chrysler submitted a Defect Information Report (DIR) identifying a defect in the FPR within the TIPM-7 which can result in a no start or stall condition in approximately 188,723 model year (MY) 2011 Jeep Grand Cherokee (WK) and Dodge Durango (WD) vehicles manufactured from January 5, 2010 through July 20, 2011 (14V-530).In a February 24, 2015 letter, Chrysler submitted a second DIR expanding the scope of the FPR defect condition to include an additional 338,216 MY 2012 through 2013 Jeep Grand Cherokee vehicles manufactured from September 17, 2010 through August 19, 2013 and MY 2012 through 2013 Dodge Durango vehicles manufactured from January 18, 2011 through August 19, 2013 (15V-115).ODI analysis of the CAS allegations of TIPM defects resulting in stall while driving, airbag non-deployment, unintended acceleration, fire and other faults identified a single defect condition related to 1 of over 60 different circuits in the TIPM assembly. The most common effect of this defect condition, related to the fuel pump relay, was a no-start concern, but it could also result in stall while driving (76 complaints). No valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components.Except insofar as the petitioner's contentions relate to the defect condition addressed by the Chrysler recalls, the factual bases of the petitioner's contentions that any further investigation is necessary are unsupported. In our view, additional investigation is unlikely to result in a finding that a defect related to motor vehicle safety exists or a NHTSA order for the notification and remedy of a safety-related defect as alleged by the petitioner at the conclusion of the requested investigation. Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to best accomplish the agency's safety mission, the petition is den
- Rear Differential Failure
In a letter dated October 2, 2012, Chrysler Group LLC (Chrysler) submitted a Defect Information Report (DIR) to NHTSA identifying a safety defect in approximately 48,058 vehicles built with an axle pinion nut that can loosen, which could result in lock-up of the rear axle and/or separation of the rear drive shaft from…
In a letter dated October 2, 2012, Chrysler Group LLC (Chrysler) submitted a Defect Information Report (DIR) to NHTSA identifying a safety defect in approximately 48,058 vehicles built with an axle pinion nut that can loosen, which could result in lock-up of the rear axle and/or separation of the rear drive shaft from the rear axle (NHTSA Recall No. 12V-474).The vehicles involved in this recall are model year (MY) 2009 and MY 2010 Dodge Ram 1500 (46,677) and Dodge Dakota (1,381) vehicles manufactured between July 1, 2009 and November 30, 2009 built with 9.25? rear axles built at Chrysler?s Detroit Axle Assembly Plant.Chrysler stated it determined during this time frame there were instances of 9.25? axles built with rear axle pinion nuts that were missing the adhesive patch.The remedy for these vehicles is to install a pinion nut retainer.In a review of data in its complaint database and data submitted by Chrysler, the Office of Defects Investigation (ODI) identified 194 reports (including 3 crash reports) of rear axle lock up and/or drive shaft separation outside of the scope of recall 12V-474.In a letter dated February 5, 2013, Chrysler submitted a second DIR to NHTSA identifying another safety defect in approximately 278,150 vehicles built with 9.25? rear axles and outside of the scope of recall 12V-474 that could also result in lock-up of the rear axle and/or rear drive separation (NHTSARecall No. 13V-038).Chrysler stated that analysis of field return parts from this vehicle population, undersized pinion splines were found as the likely factor contributing to the loosening of the pinion nut.The vehicles involved in this recall are:266,091 MY 2009?2012 Dodge Ram 1500 vehicles manufactured from 2/28/09 through 6/30/09 and 12/1/09 through 10/20/11 (including 183,421 MY 2009-2010 subject vehicles); 8,475 MY 2009?2010 Dodge Dakota vehicles manufactured from 2/18/07 through 6/30/09 and 12/1/09 through 7/9/10; 2,346 MY 2009 Chrysler Aspen vehicles manufactured from 1/19/07 through 12/18/08; and 1,238 MY 2009 Dodge Durango vehicles manufactured from 1/17/07 through 12/18/08.The remedy for these vehicles is the same as for 12V-474.The failure counts in this resume are for the subject MY 2009-2010 Dodge Ram 1500 vehicles only.The recalled vehicle counts are based on current estimates from Chrysler and may differ from estimates in the original DIR's.This Preliminary Evaluation is closed.The ODI report cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers:10489593,10489091,10488952,10485174,10485096,10484596,10484490,10483394,10483370,10482853,10482816,10482438,10479806,10479352,10478724,10477460,10477354,10476923,10476691,10475939,10475241,10475158,10473147,10472488,10470655,10470516,10470231,10470152,10469969,10469548,10469435,10468759,10468024,10467819,10467805,10467683,10467196,10466630,10464240,10448778,10445208,10443542,10439902,10375394,10362531,10353440
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10191460Valve Body. These may cause over drive cycling.
- 10191455Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10166537RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
- 10159951Flash: MIL Illumination With Transmission And Driveability Improvements This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software. The customer may experience a MIL illumination. Upon further investigation the technician may find that any of the following erroneous Diagnostic Trouble Codes (DTCs): ? U0140 - Lost Communication With Body Control Module. 2010 DJ 5.7L (Sales Code EZC) Attempting to clear this DTC will be unsuccessful. ? P050D - Cold Start Rough Idle. ? P2181 - Cooling System Performance has been set. ? P0935 - Line Pressure Sensor Circuit High. All RFE transmissions. P0300 through P0308 - Multiple and Single Cylinder Misfire. This condition can occur when the vehicle is started cold and the driver immediately places the vehicle in drive and applies heavy throttle. Driveability and Transmission improvements are also included with this software release. These changes consist of the following: ? Enhanced clutch protection for more robust torque management during repeated fore and aft movement (rocking vehicle). All engines. ? A revised torque convertor lockup schedule that will reduce transmission temperatures in Tow/Cruise mode. All models equipped with RFE transmission. ? A Clunk sound or feel a shudder when the cruise control resume switch is pressed. This condition is most noticeable after the brakes were pressed to cancel cruise control and then the resume switch is pressed. All models equipped with RFE transmission. ? A shudder or shaking feeling when a wide open throttle (WOT) event is performed by the customer. This is most noticeable after the transmission downshifts during the WOT event. This condition will stop once the transmission upshifts. All models equipped with RFE transmission. ? A shudder or shaking feeling when accelerating from a stop under moderate throttle. This condition will stop once the transmission upshifts. All models equipped with RFE transmission.
- 10139985Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10139978Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10139595Part Description: Insulator in Lever Assembly - Valve Body - Trans Issue Description: The manual valve insulator, attaching rivet and an instruction sheet are now available as a kit. If the insulator requires replacement lease order 68253099AA. Note: Insulator color is not relevant for service
- 1013900968069384A$, R8069384A$, 68086182A$, R8027067A$, RL002012A$ - Gasket, Cylinder Head Cover Before replacing injectors for Diagnostic Trouble Codes P0201, P0202, P0203, P0204, P0205, and/or P0206, please make sure that the wiring loom and/or connector in the valve cover gasket is not the root cause to your concern. In addition, make sure that the wiring attaching nuts are torqued to their proper value.~
- 10138987Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10058565Chrysler: some vehicles experience screen lock up on radio display or the screen goes blank, intermittently, text message IS grayed out soft keys, back up display turns off. Model 2015 charger, durango, grand cherokee, cherokee, RAM 1500, 2500, 3500, 3500 cab, 4500 cab, truck.
- 10058553Fiat chrysler: frequently asked questions concerning certain recalled vehicles that are not repaired
- 10058530Dodge: some trucks experiencing diagnostic trouble codes (dtc) with malfunction indicator lamp (mil) on: excessive time entering closed loop air/fuel ratio control, position of brake/accelerator pedal, reductant pressure too high, reductant pump 1 control performance. Model 2015 RAM 1500. Updated 10/15/15.
- 10058515RAM: this bulletin provides procedure on reprogramming power train module with the most updated software updated 10/2/15
- 10052604Chrysler: the current vehicle emission control information label was inaccurately identifies the engine as having an exhaust gas recirculation valve (egr).
- 10041625Dodge: see document search button for owner letter. Vehicles may experience water ingression in outer tie rod ends.
- 10034710Dodge service campaign: see document search button for owner letter. Mopar chrome front bumper corrosion. The mopar replacement chrome front bumper on certain vehicles may experience a corrosion condition on the chrome surface of the bumper. The front bumper must be replaced on all involved vehicles. Csc letter was received.
- 10034470Dodge truck service campaign: see document search button for owner letter. The front driver/passenger seat cushion covers on the trucks may tear during normal usage. The front driver/passenger seat cushion covers must be inspected and some seat cushions may need to be replaced. Csc letter was rec'd.
- 10034072Dodge service campaign: see document search button for owner letter. Reprogram hvac control head and inspect/replace actuators. The hvac mode door actuator gears on vehicles may break and result in the inability to fully control the hvac functions. Csc letter was rec'd.
- 10033731Dodge: steering wander. While traveling on a straight stretch of highway, customer may feel the need to provide steering input to correct a vehicle wander condition.
- 10033690Dodge: bulletin involves replacing the short runner valve (srv), srv connector, wiring pigtail, and adding a new stud for a tie strap.
- 10032711Dodge service campaign: see document search button for owner letter. The windshield washer fluid level sensor on some trucks may leak allowing washer fluid to wick through the wiring harness to the ambient temperature sensor. This can damage the ambient temperature sensor and cause illumination of the malfunction indicator lamp (mil) or may result in a non-functional low washer fluid warning lamp.
- 10030706Dodge: mil illumination or stored diagnostic trouble code (dtc) for p1004 or 02016 or 02017. This involves replacing the short runner valve (srv), srv connector, wiring pigtail, and adding a new stud for a tie strap. The srv wiring takeout was not long enough and caused excessive wear on the srv, and srv wiring connector resulting in a loose connection. Also includes model/my 2009 cab chassis (4500).
- 10030346Chrysler/dodge: tailgate spoiler modification. Vehicles may require the addition of two sided tape to the inboard edge of the tailgate spoiler to prevent the spoiler from tearing off the tailgate when cargo IS unloaded.
- 10028944Chrysler: vehicle vibration or shake at highway speed: the tires are flat spotted due to shipping or sitting in the lot for an extended period, the vehicle vibration will go away after the tires are warmed up, (normally 10 to 20 miles of highway driving depending on outside temperatures).
- 10028833Dodge service campaign: see document search button for owner letter. A non applicable vehicle emission control information (veci) label was inadvertently installed. Csc letter was received.
Every Dodge RAM 1500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.