2010 Dodge RAM 1500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › RAM 1500 › 2010
These records cover every 2010 Dodge RAM 1500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2010 Dodge RAM 1500. Newest first.
Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia.…
Risk and remedy
Risk
If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.
Remedy
Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the…
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009…
Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.
Chrysler is recalling certain model year 2009-2010, Ram 1500 and Dodge Dakota trucks, manufactured from July 1, 2009, through November 30, 2009, because the rear axle pinion nut may loosen due to a lack of adhesive.
Risk and remedy
Risk
If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.
Remedy
Chrysler will notify owners, and dealers will install a pinion nut retainer, free of charge. The recall began on June 17, 2013. Owners may contact Chrysler at 1-800-247-9753.
Owner complaints
488 complaints26 involved a crash3 involved a fire13 injuries
What owners report most
Latest complaints
- Engine · Steering · Suspension
I went to the car wash in the afternoon, I parked truck in driveway when I got home. Ate lunch with my kids and went outside after and was enjoying the summer weather and unexpectedly my truck started rolling in the driveway and crashed into trees on my property. I got a stick stuck in my leg…
I went to the car wash in the afternoon, I parked truck in driveway when I got home. Ate lunch with my kids and went outside after and was enjoying the summer weather and unexpectedly my truck started rolling in the driveway and crashed into trees on my property. I got a stick stuck in my leg trying to get my truck out of the woods that became infected. Truck went to dealership and 2 recalls were fixed. The Brake Transmission Shift Interlock (BTSI) described in the recall is exactly what happened in this incident. Causes a rollaway vehicle that may cause crash or injury unexpectedly with no warning. I reported it to Mopar and Stellantis and made claims with both.
- Fuel/propulsion system
RECALL COMPLIANCE FAILURE & RECALL REPORTING FRAUD BY AUTHORIZED DEALER Vehicle: Dodge Ram Truck Stellantis Corporate Case #: XXX/ XXX Authorized Dealership: The Faricy Boys Chrysler Jeep ([XXX]) Safety Defect & Non-Compliance Description: On XXX, my vehicle was brought to an authorized Mopar…
RECALL COMPLIANCE FAILURE & RECALL REPORTING FRAUD BY AUTHORIZED DEALER Vehicle: Dodge Ram Truck Stellantis Corporate Case #: XXX/ XXX Authorized Dealership: The Faricy Boys Chrysler Jeep ([XXX]) Safety Defect & Non-Compliance Description: On XXX, my vehicle was brought to an authorized Mopar dealership (Faricy Chrysler Jeep) to complete a mandatory federal safety recall involving the fuel tank straps and bolts. Per official protocol, executing this safety work requires handling and disassembling elements of the fuel tank and surrounding fuel infrastructure. Upon completing the recall work, the dealership left the vehicle with newly cracked fuel lines, a bent gas line vent, a missing hose, and a broken Evaporative Emission System (ESIM) module connector completely unhooked and undone beneath the vehicle. The truck entered the shop with zero active fuel system faults or emissions codes, and it is now sitting unfinished at the shop in an unsafe, non-compliant operating condition. Federal Violation & Reporting Discrepancy: The dealership left the vehicle in this hazardous condition, called me, and stated it would cost at least $2,000 out-of-pocket to repair the fuel lines and connect the infrastructure. Under federal law, safety recalls must be completed effectively and entirely at no cost to the consumer. Furthermore, the dealership has issued communications claiming the recall is officially complete, yet the official federal NHTSA database explicitly flags my VIN as incomplete. The dealership appears to be falsely reporting the completion of a federal safety recall to the manufacturer/government while holding a physically non-compliant, unsafe vehicle on their lot. Stellantis Corporate is dragging out an internal arbitration process to pressure me into taking the unfinished vehicle back to evade liability. I have recorded audio admissions from the service department confirming these details. Reporting Consumer: [XXX] | 719 INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Power train
The contact owns a 2010 Dodge Ram 1500. The contact stated while driving at an undisclosed speed, the driveshaft detached. No warning lights were illuminated. The contact received notification for NHTSA Campaign Number: 13V038000 (Power Train) however, the part to complete the recall repair was not…
The contact owns a 2010 Dodge Ram 1500. The contact stated while driving at an undisclosed speed, the driveshaft detached. No warning lights were illuminated. The contact received notification for NHTSA Campaign Number: 13V038000 (Power Train) however, the part to complete the recall repair was not yet available. The vehicle was towed to a dealer, where it was diagnosed that the rear axle pinion nut needed to be replaced. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 262,420.
- Power train
During unrelated work, a mechanic discovered the retaining ring for recall N08 (rear axle pinion nut) was not installed and the pinion nut was loose enough to turn by hand. He stated the recall had either been performed incorrectly or not at all, and that the vehicle was unsafe to drive. The recall…
During unrelated work, a mechanic discovered the retaining ring for recall N08 (rear axle pinion nut) was not installed and the pinion nut was loose enough to turn by hand. He stated the recall had either been performed incorrectly or not at all, and that the vehicle was unsafe to drive. The recall shows “completed” in 2013, but the defect is still present. I contacted Stellantis Customer Care, submitted photos, and they confirmed in writing that if the defect still exists, the recall must be performed free of charge regardless of age, mileage, or ownership. I sent the photos of the missing ring, screenshots showing the recall marked completed, and Stellantis’ confirmation to the dealership before having the vehicle towed to verify coverage. The truck was towed to Time Chrysler Dodge Jeep Ram of Portland. My initial contact was [XXX] at that location. However, all recall decisions and communication later came from [XXX] , who works at a different dealership. Over the next month, the dealership repeatedly stalled the recall, saying they were waiting on approval from the district manager and then from the recall department, but no action was ever taken. Despite having Stellantis’ written confirmation and clear photographic evidence of the unresolved defect, the dealership refused to perform the recall. They insisted on treating it as a “warranty” issue and cited reasons such as mileage, age, and not being the original owner—none of which apply to safety recalls. They then stated that teardown and diagnosis “would run $1000,” even though the defect has already been documented by both the mechanic and Stellantis. All communication, including photos, the mechanic’s findings, Stellantis’ confirmation of coverage, and the dealership’s refusal, is available upon request. The truck has now been sitting at the dealership for over a month with an unresolved safety defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
Was just driving and the engine shut off and a check engine light came on and won’t start again believe timing chain failed
- Power train
2010 Dodge Ram 1500 truck purchased used late May 2025 with 57000 miles. Late August 2025 with 60000 miles rear axle fell off when driving on Freeway at 60 miles per hour. Very serious accident was narrowly avoided as could not steer vehicle.Truck was serviced at dealership for recall of a pinion…
2010 Dodge Ram 1500 truck purchased used late May 2025 with 57000 miles. Late August 2025 with 60000 miles rear axle fell off when driving on Freeway at 60 miles per hour. Very serious accident was narrowly avoided as could not steer vehicle.Truck was serviced at dealership for recall of a pinion nut coming loose at 36107 miles in September 2013. Per this recall, the loose pinion nut can cause the axle to fail. The recall maintenance done in September 2013 at 36107 miles only lasted 24000 miles and serious safety issues reoccurred. In my opinion, on my vehicle the recall did not fix the problem. Now I am stuck with a $5000 repair on a vehicle with known recalls and safety issues that was supposedly fixed.Perhaps a second recall should be considered regarding this issue.
- Power train · Suspension · Wheels
Me and my husband were driving down the road to go see a friend and all of a sudden the wheel hub assembly broke in half causing us to have to slam on our brakes and keep from crashing. The wheel almost ended up under our truck making the truck look like it was kachowing like Lightening McQueen from the movie Cars
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2010 Dodge Ram 1500. The contact stated that while attempting to obtain an auto warranty from Car Shield, it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 125,526 and at the time of registration, it was discovered that the mileage was 228,863.
- Power train · Unknown or other
I was driving to work on [XXX] when my rear end locked up and I slid sideways down [XXX]. I was going slower than normal due to slippery road conditions. The mechanic told me it was the pinion nut that froze up and locked up the gears and snapped the drive shaft. If it had been clear roads the…
I was driving to work on [XXX] when my rear end locked up and I slid sideways down [XXX]. I was going slower than normal due to slippery road conditions. The mechanic told me it was the pinion nut that froze up and locked up the gears and snapped the drive shaft. If it had been clear roads the truck probably would have flipped over. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system
took the vehicle to the dealer on 2/27/25 on invoice # chcs169951 and they have refused to fix the issue. i was given a proof of correction paper without doing any or the work and told that they are no responsible to fix the issue because it is an older vehicle. I have been trying to register the…
took the vehicle to the dealer on 2/27/25 on invoice # chcs169951 and they have refused to fix the issue. i was given a proof of correction paper without doing any or the work and told that they are no responsible to fix the issue because it is an older vehicle. I have been trying to register the vehicle but am unable to because it will not pass the brake and light inspection. I was told that it would take 2-3 weeks to update the system and has now been close to 2 months and still no update.
- Power train
The contact owns a 2010 Dodge Ram 1500. The contact stated while driving at an undisclosed speed, there was an abnormally loud sound coming from the rear of the vehicle. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the rear axle differential pin…
The contact owns a 2010 Dodge Ram 1500. The contact stated while driving at an undisclosed speed, there was an abnormally loud sound coming from the rear of the vehicle. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the rear axle differential pin retaining bolt had failed and needed to be replaced. The vehicle was not repaired. The vehicle was taken to the dealer but was not yet diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 160,704.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2010 Ram 1500. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 173,840 and at the time of registration, it was discovered that the mileage was 301,000.
- Electrical system · Forward collision avoidance › Adaptive cruise control
Ignition,key fob will not correctly start engine. Engine dies going down the road , will not stay running after you start engine it just dies and kicks the key fob out to the floor. Trying to retrieve the fob and restarting the engine, and not crashing is a serious problem. Have nearly been in major crashes because of this .
- Service brakes
We have had our truck taken to Nyle Maxwell in Taylor Texas and they have were suppose to check the truck because two lights came up on the dash board which dash ESP ABS and traction control light.The shift stick was stuck in park. They towed it to there shop but the lights were off and the gear…
We have had our truck taken to Nyle Maxwell in Taylor Texas and they have were suppose to check the truck because two lights came up on the dash board which dash ESP ABS and traction control light.The shift stick was stuck in park. They towed it to there shop but the lights were off and the gear shift was working. I drove off the lot had to stop at a light and my truck veered left sharply. They have looked at this problem twice. They are not finding anything but it is my truck I drive with my kids. We need so help. They also had to fix the ac and the serpentine belt because that broke while I was driving after they said it was good and safe to drive.
- Electrical system · Unknown or other
While driving my 2010 Dodge Ram 1500 Quad Cab, the key fob (FOBIK) has fallen out of the ignition while actively driving. The key can be removed from the ignition while actively driving with little to no effort. Upon this happening, the vehicle sometimes remains fully operable, at times it remains…
While driving my 2010 Dodge Ram 1500 Quad Cab, the key fob (FOBIK) has fallen out of the ignition while actively driving. The key can be removed from the ignition while actively driving with little to no effort. Upon this happening, the vehicle sometimes remains fully operable, at times it remains driving but looses speedometer, wipers, heat/ac, running/brake lights and turn signals, or the vehicle will completely shut off, losing all function and drivability to include power steering. In one instance, the vehicle remained driving but lost wipers and lights during a night time storm. On another occasion, the vehicle lost all drivability traveling at a high rate of speed at night with traffic on a highway in a rural area with no streetlights. This defect has provided for a multitude of highly dangerous events while driving. There IS a recall (recall ref K08) describing this exact issue, however my VIN was not included in the recall and is not being recognized and or honored for recall repair by local Chrysler Dodge Dealerships or by Chrysler Headquarters. Chrysler Headquarters customer service communicated it is the responsibility of the NHTSB to add my VIN to the recall in order for the repair or replacement of the faulty WIN module along with replacement and programming of key fobs to be covered. This repair is estimated to cost $2500.
- Electrical system
WIN module failure. When driving down the road/highway, the vehicle will turn off with no warning of any problems. The key can be removed while the vehicle is still running. The vehicle will start up with the key cranked diagonally but when released the vehicle dies making it more difficult to…
WIN module failure. When driving down the road/highway, the vehicle will turn off with no warning of any problems. The key can be removed while the vehicle is still running. The vehicle will start up with the key cranked diagonally but when released the vehicle dies making it more difficult to start the vehicle after it dies while driving down the road/highway. When a bump is hit in the road the key moves and the vehicle dies. We have spoken to the local Dodge dealership who confirmed that it is a WIN module issue while servicing the vehicle due to other recalls as well as several locksmiths.
- Electrical system · Engine · Structure › Body
My husband was driving about 20mls per hrs when our truck cought fire the whole front of our truct cought fire. The front mirror and everything if distroit due to the fire .
- Electrical system
Wireless ignition module fails and will stall out the engine. This can happen at speed or stopped. Wireless ignition module will intermittently fail and cause a loss of power at speed causing no power steering or power brakes
- Structure › Body
The frame has rusted thru, the fuel tank strap has failed and the fuel tank has dropped. If this had happened while driving, it could have killed him and many others. Upon researching for information, we found recall U04/nhsta 18v-160 which stated this document replaced service bulletin TSB#…
The frame has rusted thru, the fuel tank strap has failed and the fuel tank has dropped. If this had happened while driving, it could have killed him and many others. Upon researching for information, we found recall U04/nhsta 18v-160 which stated this document replaced service bulletin TSB# 1400218 - all for this exact problem. This was a regional recall/extended warranty and was not issued for vehicles in our region. But this document does state that should any vehicle meet the criteria described (make date range, model year, and problem) that that vehicle should be covered. My fathers truck meets all 3 criteria. Upon calling FCA (Fiat, Chrysler Automobiles), who issued the document, we were told that we aren't able to be included in this issue, since we don't have a recall listed and also because the recall turned from a recall to an extended warranty that expired in 2022. If this is a known issue why is there an expiration date on the repair of it? My father's truck only has about 67,000 miles on it, which is probably why the problem is only presenting now. And if we had known there was a possible chance that this could happen, why weren't we informed to check it? He is the original owner of the vehicle and we are appalled at the FCA repsonse. The document in reference is attached.
- Engine
This incident has happened several times while driving on the road. When driving at slow speeds, approaching a red light, or slowing down to make a left or right turn, the vehicle shuts off without warning. The power steering and brakes stop working, making the car hard to handle. I have to put it…
This incident has happened several times while driving on the road. When driving at slow speeds, approaching a red light, or slowing down to make a left or right turn, the vehicle shuts off without warning. The power steering and brakes stop working, making the car hard to handle. I have to put it in neutral, restart the vehicle, and start it back up without any problems. This is a very well-maintained vehicle and a daily driver. The car has 172000 miles on it. I have done internet research on this, and it seems to be a very common thing with Dodge Ram Trucks.
- Steering
[XXX] My truck sway at 65mph, like a drunk person driving. Scary. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Service brakes, air › Antilock › Abs warning light · Traction control system
The contact owns a 2010 Ram 1500. The contact stated while driving 40 MPH, there was an abnormal sound coming from the vehicle. The contact stated that the ESP, traction control, and ABS warning light illuminated. The vehicle was taken to the dealer and the tire pressure pump was replaced but the…
The contact owns a 2010 Ram 1500. The contact stated while driving 40 MPH, there was an abnormal sound coming from the vehicle. The contact stated that the ESP, traction control, and ABS warning light illuminated. The vehicle was taken to the dealer and the tire pressure pump was replaced but the failure reoccurred. The vehicle was taken to the dealer, and they stated that the ABS module needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and stated that the part was no longer available. The failure mileage was 108,000.
- Electrical system · Engine · Steering
My 2010 Dodge Ram 1500 shuts off without warning. The incident frequently happens when I am driving at city speeds. If I am turning, the vehicle shuts off, and the power steering also cuts off, causing problems turning the steering wheel. When I am driving straight, there are no warning lights on the dashboard, and the vehicle shuts down. This is very dangerous while going.
- Suspension
i recieved a recall for the rear axle pinion nut, took truck in and was told my truck was not involved. then i recieved another recall for the same thing and took truck in and they installed a retainer on the nut and this was supposed to fix the problem. now at 85,000 miles the pinion came loose so…
i recieved a recall for the rear axle pinion nut, took truck in and was told my truck was not involved. then i recieved another recall for the same thing and took truck in and they installed a retainer on the nut and this was supposed to fix the problem. now at 85,000 miles the pinion came loose so the retainer was not the answer. took to dealer and they want me to pay then try to get my money back from chrysler. i think chrysler should fix it at there cost because they knew they had a bad product to start with. truck is well taken care of not beaten normal driving. there is no way a rear end should go out at 85,000 miles. sent a notice to chrysler complaint dept but no responce, gues they just dont care.hope you do
- Engine · Power train › Automatic transmission
The contact owns a 2010 Dodge Ram 1500. The contact stated that while driving at an unknown speed, the vehicle was jerking as the check engine warning light illuminated. The vehicle was taken to a local dealer where the contact was informed that the oxygen sensors and transmission fluid needed to…
The contact owns a 2010 Dodge Ram 1500. The contact stated that while driving at an unknown speed, the vehicle was jerking as the check engine warning light illuminated. The vehicle was taken to a local dealer where the contact was informed that the oxygen sensors and transmission fluid needed to be replaced. The vehicle was not repaired, however, the contact attempted to replace the oxygen sensors himself. The failure reoccurred and the vehicle was then taken to an independent mechanic, where it was diagnosed that the engine needed to be replaced. The vehicle was repaired and the proper oxygen sensors were replaced; however, the contact stated that when he drove over 45 MPH, all warning lights would illuminate on the instrument panel and that an abnormal noise was heard coming from the rear of the vehicle. The vehicle was then taken back to the independent mechanic where it was diagnosed that the transmission needed to be replaced. Additionally, during the repair the contact was informed that the rear differential had loose bolts and would also need to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure however the VIN was not available at the time of the call therefore a case could not be opened. The VIN was not available. The approximate failure mileage was 240,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Electrical overstress
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011751"Dual EVAP System Extreme Duty Vapor Canister Filter Kit Customers operating fleet or severe/extreme duty gasoline vehicles in continuous dusty driving conditions can plug the single OE filter system and may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0441 - EVAP Purge System Performance. P062A - Fuel Pump Control Performance. Customers may also experience one or more of the following: Hard to fill fuel tank with fuel. Premature shut-off of the gas nozzle when refueling. Flow back of fuel while refueling. "
- 11010205Plate - Planetary
- 11004993Replacement Totally Integrated Power Module (TIPM) Displays Incorrect Vehicle Identification Number (VIN) Current and Active
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10229886Flash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer?s concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20F(-29C)).
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10228020Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10225951CONNECTOR Trailer Tow,WIRING Trailer Tow,CONNECTOR 7 Way,WIRING Rear Bumper If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10223847Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Updated OBD monitors to support the new regulations scope and requirements for Mexico (Regulation NOM042).
- 10223679Wheel Liner to Steel Bumper Slip Fit Design This bulletin involves informing technicians that the wheel liners tabs are to be tucked behind the flange of the bumper bracket. No fasteners are used to attach the liner and the bumper when vehicle is equipped with a steel front bumper.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223525Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set
- 10222885CONNECTOR/WIRING, Trailer Tow If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- 10221380CONNECTOR/WIRING, Trailer Tow If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10221054Flash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer?s concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20F(-29C)).
- 10220868Transfer Case Gear Motor/Actuator Installation Guidelines.
- 10220837GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
- 10220687Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10220611Dual EVAP System Extreme Duty Vapor Canister Filter Kit This informational bulletin is to make technicians aware that an EVAP dual vapor canister filter kit(Mopar part #68478013AA)is available in place of the OEM single vapor canister filter.This kit should not be installed on vehicles driven in normal conditions that are not subjected to the below symptom/conditions. Customers operating fleet or severe/extreme duty gasoline vehicles in continuous dusty driving conditions can plug the single OE filter system and may experience a Malfunction Indicator Lamp (MIL) illumination. Upon furtherinvestigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:P0441 - EVAP Purge System Performance. P062A - Fuel Pump Control Performance. Customers may also experience the following conditions:Hard to fill fuel tank with fuel. Premature shut-off of the gas nozzle when refueling. Flow back of fuel while refueling.
- 10220561Rattle Tapping Fluttering Noise From A Pillar Or Dash Driving At Highway Speeds
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10217614Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with updated software. illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs): MIL Illumination P2096 - Downstream Fuel Trim System 1 Lean (5.7L Engines). P2097 - Downstream Fuel Trim System 1 Rich (5.7L Engines). P2098 - Downstream Fuel Trim System 2 Lean (5.7L Engines). P2099 - Downstream Fuel Trim System 2 Rich (5.7L Engines). Drivability Improvements: **MIL Lamp without DTC Active - Permanent Fault Code Issue (fix permanent fault code retention). ASD Relay (to improve fuel pump relay initialization at key on).** Fuel pump relay operation at key on. Engine seems to lack power at high engine RPMs (5.7L and 4.7L Engines). Shudder or shake condition on wide open throttle stab during downshift event (5.7L and 4.7L Engines). EVAP Diagnostic Enhancements. This diagnostic routine will be disabled while the vehicle is in decel fuel shut off mode.(3.7L/4.7L Engines only). Audible knock sound on WOT launches (DJ/DD 5.7L Engines only). Transmission Improvements: High engine RPMs needed before vehicle will upshift from 3rd to 4th. (5.7L and 4.7L Engines). Harsh 1st to 2nd gear upshift (5.7L and 4.7L Engines). Unexpected or busy downshift while coasting between 72-77 kmh (45-48 mph) (DS 5.7L Engines only).
- 10216423Advanced Field Action Communication ? N0802072013 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 through 2012 model year: (DS) Ram Truck (ND) Dodge Dakota (HB) Dodge Durango (HG) Chrysler Aspen NOTE: All of the above involved vehicles are equipped with a Chrysler 9.25? rear axle (sales code DRB) or C235 rear axle (sales code DRN). The above vehicles may have been built with a rear axle pinion nut that can loosen, which could result in the rear axle locking up. This could cause a loss of vehicle control and/or a crash with little warning. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Dealers will be notified of the launch of this safety recall by way of established methods used in the past.
- 1021641868069384A$, R8069384A$, 68086182A$, R8027067A$, RL002012A$ - Gasket, Cylinder Head Cover Before replacing injectors for Diagnostic Trouble Codes P0201, P0202, P0203, P0204, P0205, and/or P0206, please make sure that the wiring loom and/or connector in the valve cover gasket is not the root cause to your concern. In addition, make sure that the wiring attaching nuts are torqued to their proper value.~
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10216349Advanced Field Action Communication ? M3411302012 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2009 and 2010 model year (DS) Ram 1500 series trucks and (ND) Dodge Dakota trucks equipped with a Chrysler built 9.25? rear axle. The above vehicles may have been built without an adhesive patch on the rear axle pinion nut threads. The lack of this adhesive patch could allow the rear axle pinion nut to loosen and/or the rear driveshaft to separate from the rear axle. A loose pinion nut could cause the rear axle to seize and a separated driveshaft could cause a loss of motive power. Excessive loosening of the rear axle pinion nut can allow the pinion gear to be drawn into the rear axle assembly, resulting in rear axle lock-up. Chrysler will conduct a voluntary safety recall on all affected vehicles to install a rear axle pinion nut retainer. Unfortunately, the parts required to provide a permanent remedy for this condition are currently not available. Chrysler anticipates the remedy parts will be available within the 1st quarter of 2013. An interim notification letter is being mailed to all involved vehicle owners. Chrysler is required by Federal law to inform all involved vehicle owners of a potential vehicle safety defect.
- 10216003Part Description: Integrated Trailer Brake Module Issue Description: Before replacing an Integrated Trailer Brake Module (ITBM) please review the following items.~ 1. The ITBM does not control the trailer lights. If the trailer lights are not working, do not change the ITBM.~ 2. If the Diagnostic Trouble Code(DTC) reported by the ITBM is C10C7-11 "Electronic Trailer Brake Control Output Short to Ground" or C10C7-12 "Electronic Trailer Brake Control Output Short to Battery", please verify the wiring on the trailer. The purpose of this faults is to protect the ITBM output from faulty trailer wiring.~ 3. If the customer complaint is ITBM not detecting the trailer connection. Do not change the ITBM until the system has been verified with load simulation and confirmed that ITBM is not recognizing the load. If load simulation indicates that the ITBM is operating properly, please verify the trailer wiring.~ 4. ITBM output will not be available if a trailer is not connect and plugged into the vehicle. The ITBM must detect a trailer before you will get trailer brake output.~ 5. Please follow the service manual procedures before changing the ITBM.~ This part can only be used as a replacement on vehicles with the Integrated Trailer Brake system already installed. Do not attempt to use this module for the purpose of adding the Integrated Trailer Brake system to a vehicle that was not originally equipped. You will encounter configuration difficulties. MOPAR has developed a kit, part number 82212548 to be used for installation of the Integrated Trailer Brake system on vehicles.
- 10215879Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10215817This bulletin involves inspecting and if necessary replacing the Ram Box lid. Ram box lid discoloration.
- 10214527CONNECTOR/WIRING, Trailer Tow If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
- 10212290Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10190615Transfer Case Gear Motor/Actuator Installation Guidelines.
Every Dodge RAM 1500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.