2011 Dodge RAM 1500

Recalls

4 recalls name the 2011 Dodge RAM 1500. Newest first.

• Fuel system, gasoline › Storage › Tank assembly › Mounting

  Mar 8, 2018NHTSA 18V160000218,617 vehicles

  Chrysler (FCA US LLC) is recalling certain 2009-2012 Dodge Ram 1500 trucks currently, or ever registered, in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia.…

  Risk and remedy

  Risk

  If the fuel tank were to drop and contact the ground, a fuel leak may result. Additionally, in the event of a crash, the fuel tank may not remain secured to the vehicle, possibly causing a fuel leak. A fuel leak in the presence in an ignition source, can increase the risk of a fire.

  Remedy

  Chrysler will notify owners and dealers will bolt a bracket reinforcement to the frame, free of charge. The recall began May 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U04.

  Full recall details →

• Power train › Automatic transmission › Lever and linkage › Column shift

  Dec 20, 2017NHTSA 17V8210001,482,874 vehicles

  Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the…

  Risk and remedy

  Risk

  Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

  Remedy

  Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.

  Full recall details →

• Power train › Driveline › Differential unit

  Feb 6, 2013NHTSA 13V038000278,674 vehicles

  Chrysler is recalling certain model year 2009-2012 Ram 1500 trucks manufactured from February 27, 2008, through June 30, 2009, and from December 1, 2009, through October 20, 2011; model year 2009-2011 Dodge Dakota trucks manufactured from February 27, 2007, through June 30, 2009, and from December 1, 2009, through September 30, 2011; model year 2009…

  Risk and remedy

  Risk

  If the rear axle pinion nut loosens, the axle can lock up and cause a loss of vehicle control and/or a vehicle crash with little warning.

  Remedy

  On November 7, 2013 Chrysler notified owners that dealers would install a pinion nut retainer, free of charge. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N08.

  Full recall details →

• Suspension › Rear › Axle › Spindle

  Dec 24, 2010NHTSA 10V65600060,382 vehicles

  Chrysler IS recalling certain model year 2011 RAM 1500 trucks manufactured from september 2009 through december 2010. some vehicles may have experience a noise (growl, grind) coming from the rear axle bearing which could eventually seize.

  Risk and remedy

  Risk

  A failure of the bearing could cause the vehicle to stall increasing the risk of a crash.

  Remedy

  Chrysler will notify owners and will install an oil port insert into the rear axle free of charge. the safety recall began on april 4, 2011. owners may contact chrysler at 1-800-853-1403.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system214
2. Power train180
3. Engine151
4. Fuel/propulsion system128
5. Unknown or other46
6. Steering45
7. Suspension40
8. Exterior lighting29
9. Structure23
10. Service brakes21

Latest complaints

• Sep 18, 2026OK250,000 mi
  Power train
  The contact owns a 2011 Dodge Ram 1500. The contact stated that while driving at an undisclosed speed, there was an abnormal whining sound coming from the vehicle. The contact pulled the vehicle over to the side of the road, and there was a loud popping and breaking sound coming from underneath the…

  The contact owns a 2011 Dodge Ram 1500. The contact stated that while driving at an undisclosed speed, there was an abnormal whining sound coming from the vehicle. The contact pulled the vehicle over to the side of the road, and there was a loud popping and breaking sound coming from underneath the vehicle, causing the rear wheels to lock up. Upon inspecting the vehicle, the contact discovered that the rear driveshaft had fractured and detached from the vehicle. The vehicle was towed to an authorized dealer, who diagnosed the failure and recommended the installation of a new driveshaft, rear differential assembly, and failed pinion gear. The contact referenced NHTSA Campaign Number: 13V038000 (Power Train); as a possible cause for the failure; however, the dealer informed the contact that the VIN was not included in the recall. The failure mileage was 250,000.

• Jul 9, 2026TX
  Service brakes

  Refused to perform recall T79 and customer satisfaction notice L41 emmisons. Received text message as evidence that said They are not obligated to repair my vehicle under recall, and that I would have to pay for the repairs.

• Mar 30, 2026WA134,000 mi
  Engine · Power train
  The contact owns a 2011 Dodge Ram 1500. The contact stated that while the vehicle was being serviced by an independent mechanic, the contact was informed that the motor mounts were old and fractured. The independent mechanic suggested that the vehicle was taken to the dealer for the repair. The…

  The contact owns a 2011 Dodge Ram 1500. The contact stated that while the vehicle was being serviced by an independent mechanic, the contact was informed that the motor mounts were old and fractured. The independent mechanic suggested that the vehicle was taken to the dealer for the repair. The vehicle was taken to the dealer, who confirmed that the motor mounts were fractured and that the vehicle backfired due to piston failure. The dealer replaced the motor mounts. The contact stated that the motor mounts were replaced under an unknown recall. The contact stated that on a separate occasion, the vehicle was at a specialty shop for the engine to be replaced. While at the specialty shop, the contact was informed that the motor mounts were not replaced. The vehicle remained at the specialty shop unrepaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 134,000.

• Mar 30, 2026IN150,000 mi
  Electrical system
  The contact owns a 2011 Dodge Ram 1500. The vehicle was taken to a dealer to purchase a new camper. While the vehicle was parked, the dealer made the contact aware that the passenger’s side turn signal and brake lights were inoperable on the rear towing electrical system, and that the integrated…

  The contact owns a 2011 Dodge Ram 1500. The vehicle was taken to a dealer to purchase a new camper. While the vehicle was parked, the dealer made the contact aware that the passenger’s side turn signal and brake lights were inoperable on the rear towing electrical system, and that the integrated fuse box needed to be replaced. The vehicle was not repaired. No warning lights were illuminated. The contact researched and was made aware of an unknown recall; however, the VIN was not under recall. The manufacturer was notified of the failure. The failure mileage was approximately 150,000.

• Jan 10, 2026CA
  Electrical system · Engine · Fuel/propulsion system

  There are multiple electrical issues I’ve had to trouble shoot over the past 4 months. As I’ve researched other people with the same issues online, I’ve bee seeing a lot about some recalls pertaing to electrical issues and fuel issues and so I am wondering if there are prior recalls that I might need to have taken care of which I feel could fix my vehicle issues

• Jan 5, 2026PA172,000 mi
  Air bags

  The contact owns a 2011 Ram 1500. The contact stated that the air bag warning light was illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was not notified of the failure. The failure mileage was approximately 172,000.

• Dec 6, 2025IN
  Electrical system · Service brakes · Steering
  I was driving my 2001 Dodge Ram 20-30mph and experienced a total power loss, power steering, power brakes and clock reset. My husband was also in the pickup and can attest to issue. I am an older person so had a very hard time stopping the vehicle and attempting to steer it to the side of the road.…

  I was driving my 2001 Dodge Ram 20-30mph and experienced a total power loss, power steering, power brakes and clock reset. My husband was also in the pickup and can attest to issue. I am an older person so had a very hard time stopping the vehicle and attempting to steer it to the side of the road. Traffic backed up behind me before I could put on my warning blinkers.Eventually, I turned off and on the pickup and everything worked somewhat normally but the vehicle went into limp mode. I got home, had the vehicle towed to the dealership. I explained issue, requested a total diagnosis of everything that was wrong but most importantly, I wanted the total power loss issue diagnosed, pinpointed and resolved. because I don't feel safe driving until issue is truly diagnosed and fixed. I gave them my lifetimecarmaxplus warranty . The techs found a list of parts that needed to be fixed besides the power loss problem, but told me they couldn't fix the total power loss because no codes had been thrown. I explained that since there was a total power loss it was reported by other Dodge techs that no codes could be retrieved. I asked the service manager to ask his tech what diagnostics were used and to what extent to determine the problem. He said he would call me after talking to his tech but never did. I went to the dealership 2 weeks later and asked what he found out from his tech. He was confused and apparently never did anything more about the situation. I called Chrysler warranty, they gave me a case number but again seemed oblivious to the total power loss and fixing this major safety issue. No one has attempted to address the problem or offered to have another mechanic inspect the vehicle. There were no codes that I saw on the dash and I did try to immediately retrieve any but none came up. The front passenger window locks also had been working intermittently 2 mos prior. My husband reported vehicle going in limp mode briefly 2 days prior to ...all electrical issues

• Oct 22, 2025MD125,000 mi
  Suspension
  The contact's son owns a 2011 Dodge Ram 1500. The contact stated that while his son was driving at an undisclosed speed, there was an abnormal grinding and rubbing sound coming from the rear end of the vehicle. No warning lights were illuminated. The vehicle was taken to an independent mechanic for…

  The contact's son owns a 2011 Dodge Ram 1500. The contact stated that while his son was driving at an undisclosed speed, there was an abnormal grinding and rubbing sound coming from the rear end of the vehicle. No warning lights were illuminated. The vehicle was taken to an independent mechanic for brake service. The contact stated that while the vehicle was being repaired, the independent mechanic confirmed the abnormal grinding and rubbing sound. The vehicle was not repaired. The contact was advised to contact the dealer for assistance. The contact was informed of NHTSA Campaign Number: 10V656000 (Suspension); however, the VIN was not included. The vehicle was taken to the dealer to be repaired under NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline). The dealer was made aware of the failure; however, the contact was informed that the repair was not covered under the recall. In addition, the contact stated that the dealer had not confirmed the failure but had agreed to inspect the vehicle. The manufacturer was not made aware of the failure. The failure mileage was approximately 125,000.

• Aug 11, 2025MI
  Electrical system · Fuel/propulsion system · Vehicle speed control
  Driving my vehicle throughout December of 2024 and the vehicle would die and power back up, vehicle would run intermittently and fail to continue operating while driving to and from work. Vehicle intermittently stalling during driving would cause "Near Miss" accidents on the road. Potentially…

  Driving my vehicle throughout December of 2024 and the vehicle would die and power back up, vehicle would run intermittently and fail to continue operating while driving to and from work. Vehicle intermittently stalling during driving would cause "Near Miss" accidents on the road. Potentially endangering myself as the operator and other operators on the road due to a "no start" issue and unsafe operating condition in the electrical system of the vehicle. I thought it was a bad battery so I replaced it with a brand new battery from the auto parts store While I struggled to have this matter resolved before leaving for Army Active Duty. I arranged to have the vehicle turned into a Chrysler, Dodge, Ram dealer to have a diagnostic done on the vehicle. on June 6th according to their technicians report, it shows my TIPM is bad. and needed to be replaced. The dealer failed to acknowledge this was a recall issue and would not cover the repair cost since the vehicle was out of warranty due to mileage and age. when their our hundreds of models being turned in for the same issue nationwide.

• Jul 24, 2025MI
  Electrical system · Engine · Fuel/propulsion system
  my 2011 RAM 1500 5.7L has a Faulty TIPM. Fuel Pump cuts out, causing stalling and intermittent operation, starting vehicle becomes problematic while commuting. vehicle will sometimes not start at all and will remain stuck in an ignition loop. Continues to throw random check engine codes. I have…

  my 2011 RAM 1500 5.7L has a Faulty TIPM. Fuel Pump cuts out, causing stalling and intermittent operation, starting vehicle becomes problematic while commuting. vehicle will sometimes not start at all and will remain stuck in an ignition loop. Continues to throw random check engine codes. I have had several near miss collisions while driving due to its unsafe condition I took the vehicle in to have a diagnostic done and a licensed Chrysler dealer deduced the vehicle has a faulty TIPM, which correlates to the mass recall on the 2011 RAM 1500 models However my VIN does not show its associated with the many models of 2011 RAM 1500 when I cross referenced this.

• Jun 23, 2025NC120,000 miCrash1 injury
  Power train
  The contact owns a 2011 Dodge Ram 1500. The contact stated that while driving at approximately 45 MPH, an abnormal clunk was heard coming from under the vehicle before the rear end of the drive shaft disconnected. No warning lights illuminated. The contact stated that he lost control and the…

  The contact owns a 2011 Dodge Ram 1500. The contact stated that while driving at approximately 45 MPH, an abnormal clunk was heard coming from under the vehicle before the rear end of the drive shaft disconnected. No warning lights illuminated. The contact stated that he lost control and the vehicle had jumped the curb into a ditch before coming to a stop on a culvert. The air bags did not deploy. The contact sustained minor injuries to his neck however, no medical attention was sought. A police report was not filed. The vehicle was towed and parked at the contact's home address, where it remains until further investigation. The local dealer was contacted. The vehicle was not diagnosed or repaired. In addition, the contact related to the failure to NHTSA Campaign Number: 14V796000 (Power Train) however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 120,000.

• Jun 11, 2025GA180,000 mi
  Fuel system, gasoline
  The contact owns a 2011 Ram 1500. The contact received notifications of NHTSA Campaign Numbers: 18V160000 (Fuel System, Gasoline) and 17V821000 (Power Train). The contact stated while driving 45 MPH, the fuel tank detached from the vehicle. In addition, the contact stated an abnormal sound was…

  The contact owns a 2011 Ram 1500. The contact received notifications of NHTSA Campaign Numbers: 18V160000 (Fuel System, Gasoline) and 17V821000 (Power Train). The contact stated while driving 45 MPH, the fuel tank detached from the vehicle. In addition, the contact stated an abnormal sound was coming from underneath the vehicle. The contact pulled to the side of the road and noticed the fuel tank was being dragged by the wires. A driver pulled over and assisted the contact by strapping the fuel tank back in place. The contact drove the vehicle to the residence. The vehicle was taken to the local dealer where it was determined that the front fuel tank strap frame T-Slot bracket was corroded and needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure but refused to perform the recall repair. The failure mileage was approximately 180,000. Parts distribution disconnect.

• May 23, 2025GA
  Electrical system · Power train · Structure › Body
  The gas tank fell onto the road while driving to pick up my daughter from the bus. I immediately pulled over due to the sound. I then saw the front of the gas tank on the ground , half a mile down the road I was traveling there are alot of pit holes and that could of ended in a fire or worse with…

  The gas tank fell onto the road while driving to pick up my daughter from the bus. I immediately pulled over due to the sound. I then saw the front of the gas tank on the ground , half a mile down the road I was traveling there are alot of pit holes and that could of ended in a fire or worse with my tank dragging the ground. I have taken it to the dealership that would help repair the recall but they have yet to repair or give me information about what the manufacturer has said on what to do. They told me it is to rusty underneath to repair and contacted manufacturer. I am without a vehicle its been almost 2 weeks and I have a 6 year old child and my own health issues that inquire dr appointments. I have no money for a rental and no family or friends who can help with rides. I am unsure of what to do next I just know this is extremely frustrating considering I had purchased this vehicle only a few months ago.

• Oct 21, 2024CA
  Electrical system · Engine · Fuel/propulsion system
  My truck first started having trouble starting .when driving engine it would shut-off at anytime making it dangerous to steer and breakdown in traffic. There was no fault codes or warning lights on dash . After doing testing I found that the fuel pump relay was shut-off. Tipm is faulty and all…

  My truck first started having trouble starting .when driving engine it would shut-off at anytime making it dangerous to steer and breakdown in traffic. There was no fault codes or warning lights on dash . After doing testing I found that the fuel pump relay was shut-off. Tipm is faulty and all Chrysler that have this style of tipm should be added to recall . I purchased a external fuel pump relay harness to repair tipm.

• Sep 23, 2024OH15,467 mi
  Tires

  The contact owns a 2011 Ram 1500 equipped with Goodyear Tires, Tire Line: Wrangler A/T, Tire Size: 265/70/R17, DOT Number: 1PL1YJC1R. The contact stated that while the vehicle was in for routine maintenance, the mechanic discovered that all four tires had sustained severe cracking and tread separation. The manufacturer and local dealer were notified of the failures. The failure mileage was 15,467.

• Aug 7, 2024IN
  Electrical system

  The digital instrument cluster gauges does not work sometimes and the digital speedometer does not does not work at all. Without the gauges its hard to say how slow/fast or what the vehicle IS doing. It was just inspected. No prior signs or symptoms of this. I know this IS not the first this has happened but over several years of dodge RAM trucks do this.

• Jul 11, 2024GA
  Electrical system · Fuel/propulsion system · Unknown or other

  Failure to start. Engine cranks but will not start. Remote start fails. Door locks sometimes do not work, Radio failures, engine stalls unexpectedly, TPM failure, SERV 4WD warning light is displayed sporadically. This was a recall on 2011 and 2012 Chrysler vehicles except the RAM. The RAM also has the same issues as the other recalled vehicles. Why was the Ram excluded from the recall?

• Jun 3, 2024OH15,000 mi
  Tires
  The contact owns a 2011 Ram 1500 equipped with Goodyear Tires, Tire Line: Wrangler AT Adventure, Tire Size: 265/70/R17, DOT Number: PL1YJC1R0219. The contact stated while driving at an undisclosed speed, the TPMS warning light illuminated. The vehicle was taken to an independent mechanic, where the…

  The contact owns a 2011 Ram 1500 equipped with Goodyear Tires, Tire Line: Wrangler AT Adventure, Tire Size: 265/70/R17, DOT Number: PL1YJC1R0219. The contact stated while driving at an undisclosed speed, the TPMS warning light illuminated. The vehicle was taken to an independent mechanic, where the tires were diagnosed with tread separation. The contact was informed that all 4 tires needed to be replaced. The tires were replacement tires. The tires were not replaced. The manufacturer was not notified of the failure. The tire failure mileage was approximately 15,000. The vehicle failure mileage was unknown.

• May 25, 2024IA
  Engine
  5.7 Liter Hemi Lifter/Camshaft failure. Camshaft lobe has been completely ground down. Always been well maintained and taken care of also. Apparently this is a Major recurring issue with this year Ram 1500 with the 5.7L. Didn’t have any warning lights pop up on the dash either. I believe this is a…

  5.7 Liter Hemi Lifter/Camshaft failure. Camshaft lobe has been completely ground down. Always been well maintained and taken care of also. Apparently this is a Major recurring issue with this year Ram 1500 with the 5.7L. Didn’t have any warning lights pop up on the dash either. I believe this is a safety hazard to myself and other drivers because it happens without warning and I lost 75% power of my truck on a major interstate and was almost rear ended by a semi truck hauling a heavy load. Luckily was able to swerve off onto the shoulder and save myself from a disaster.

• Apr 29, 2024NV
  Electrical system

  Ignition switch. There is an old recall on this switch but my trucks vin # was not included. I complained awhile back and still it was not added. 11373017. My switch needs to be recalled. I’m having the same exact problems originally reported. On more than one occasion I have almost gotten in an accident because of the keys falling out and getting jammed underneath the gas pedal.

• Apr 24, 2024GA
  Fuel system, gasoline · Power train
  The contact owns a 2011 Ram1500. The contact received notification of NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline) and 17V821000 (Power Train) however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of…

  The contact owns a 2011 Ram1500. The contact received notification of NHTSA Campaign Number: 18V160000 (Fuel System, Gasoline) and 17V821000 (Power Train) however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The contact stated that the dealer had confirmed that parts were ordered; however, when the vehicle was brought into the dealer for the recall repair, the contact was informed that parts had not been ordered. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available. Parts distribution disconnect.

• Mar 26, 2024MD
  Electrical system · Fuel/propulsion system

  Car turned off while driving

• Feb 6, 2024AR
  Fuel/propulsion system

  Truck has a faulty fuel pump relay which causes the pump to run constantly or not at all. This can cause the vehicle not to start, or to not perform correctly while driving and potentially cause accidents. This is a known issue among mechanics and there are a couple of bypass methods to fix - the relay is not serviceable being located in the TIPM. No warnings are associated with this issue.

• Jan 26, 2024CT100,000 mi
  Electrical system · Structure
  The contact owns a 2011 Ram 1500. The contact stated that the vehicle was experiencing electrical failures. The contact stated that while approaching the vehicle with the key fob, the doors would unlock independently, and the windows would roll down independently. The contact also stated that the…

  The contact owns a 2011 Ram 1500. The contact stated that the vehicle was experiencing electrical failures. The contact stated that while approaching the vehicle with the key fob, the doors would unlock independently, and the windows would roll down independently. The contact also stated that the front driver's side window had failed to roll down while using the power window switch. The contact stated that the failure had been recurring intermittently. Additionally, the contact stated that he had noticed moisture in the storage compartments underneath the rear passenger's side and rear driver's side seats. The contact stated that he also noticed that the rear driver's side floorboard was wet. The contact stated that upon retrieving items from the storage compartment underneath the rear passenger's side seat, he noticed that there was approximately 1-inch of water in the storage compartment and there was mold behind the rear passenger's side seat. The contact stated that he vacuumed out the water out with a hose, and then used a towel. Additionally, the contact stated that upon inspecting the vehicle after it had rained the following day, he noticed that there was water in the storage compartments underneath the rear driver's side and passenger's side seats. The contact also noticed that the floorboard on the rear driver's side and passenger's side was significantly wet, and there was a water mark on the ceiling. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 100,000.

• Jan 23, 2024NV153,000 mi
  Electrical system · Fuel system, gasoline
  The contact owns a 2011 RAM 1500. The contact stated that while driving at an undisclosed speed, the vehicle stalled and lost motive power. The vehicle was towed to Meineke where it was diagnosed with a failed fuel pump. The contact was informed that the fuel pump needed to be replaced. The vehicle…

  The contact owns a 2011 RAM 1500. The contact stated that while driving at an undisclosed speed, the vehicle stalled and lost motive power. The vehicle was towed to Meineke where it was diagnosed with a failed fuel pump. The contact was informed that the fuel pump needed to be replaced. The vehicle was towed to an independent mechanic where it was diagnosed with a failed integrated power module (TIPM). The contact was informed that the TIPM needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 153,000.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Electrical overstress

  EA19001Opened Apr 19, 2019Closed Sep 19, 2024Recall 20V024
  The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect.  During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air…

  The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect.  During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW.  The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications.  The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU.  In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment.  FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle.  Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW.  These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes.  An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time.   In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU.  This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners.  Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW.  The risk associated with the ASIC is equally shared among all OEMS involved in the investigation.  The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage.  There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation.  The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU.  If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC.  Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC.  All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled.  In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024.  With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011751"Dual EVAP System Extreme Duty Vapor Canister Filter Kit Customers operating fleet or severe/extreme duty gasoline vehicles in continuous dusty driving conditions can plug the single OE filter system and may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): P0441 - EVAP Purge System Performance. P062A - Fuel Pump Control Performance. Customers may also experience one or more of the following: Hard to fill fuel tank with fuel. Premature shut-off of the gas nozzle when refueling. Flow back of fuel while refueling. "
• 11010205Plate - Planetary
• 11004993Replacement Totally Integrated Power Module (TIPM) Displays Incorrect Vehicle Identification Number (VIN) Current and Active
• 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
• 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
• 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
• 10230050Noise From Under Seat With Occupant Seated.
• 10229886Flash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer?s concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20F(-29C)).
• 10229871Dielectric Grease This product is no longer approved for use on ignition coil and spark plug boots. Current plug boot material(silicone) is not compatible with this grease and can cause deterioration over time.
• 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10229252CONDENSER, Air Conditioning CONDITION 1: If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.
• 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
• 10228020Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
• 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
• 10226283Center Console.
• 10225951CONNECTOR Trailer Tow,WIRING Trailer Tow,CONNECTOR 7 Way,WIRING Rear Bumper If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
• 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
• 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
• 10223847Flash: Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Updated OBD monitors to support the new regulations scope and requirements for Mexico (Regulation NOM042).
• 10223679Wheel Liner to Steel Bumper Slip Fit Design This bulletin involves informing technicians that the wheel liners tabs are to be tucked behind the flange of the bumper bracket. No fasteners are used to attach the liner and the bumper when vehicle is equipped with a steel front bumper.
• 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
• 10223525Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set
• 10223510FUEL, Tank Please be advised, do not replace fuel tanks with a fuel tank that has a different capacity than the vehicle was equipped with from the factory. Please do not attempt to upfit vehicles at the dealer with increased capacity tanks, they are not compatible.
• 10223438Noise From Under Seat With Occupant Seated.
• 10223278Noise From Under Seat With Occupant Seated.
• 10222885CONNECTOR/WIRING, Trailer Tow If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
• 10221682CONDENSER, Air Conditioning CONDITION 1: If it is determined that the A/C compressor does not engage due to a refrigerant leak at the receiver/drier plug on the A/C condenser, order the receiver/drier plug kit P/N 68447796A$ and follow the repair instructions included on the instruction sheet. CONDITION 2: For stock at the dealership of the below Part Number level or older ONLY, use kit 68447796A$ to change the desiccant BAG and the desiccant bag access PLUG before installing the Cooler on the vehicle. 52014588AD level and older only. 52014609AC level and older only. 52014632AC level and older only. 52014797AG level and older only. 52014948AE level and older only. 52014978AF level and older only.
• 10221380CONNECTOR/WIRING, Trailer Tow If the connector or wiring is physically damaged, burned, melted or corroded, prior to replacing the part, please contact FCA Redacted Content If no response in 15 minutes, proceed with repair. Please send pictures of the failed part to FCA Redacted Content
• 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
• 10221054Flash: Drone or Vibration Present During MDS Operation This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. New PCM software is being released to address a customer?s concern of a drone or vibration type condition while driving at highway speeds during MDS (Multiple Displacement System) operation.In addition, the following powertrain system improvements/enhancements are also included in this software release: Improved Electronic Voltage Regulator control to more precisely maintain system voltage. Enhanced Automatic Oil Change Indicator(EAOCI) system improvements to switch to a severe duty cycle algorithm anytime the PCM is replaced to ensure the customer receives a timely oil change required message. (Only applies to vehicles using a block heater in ambient temperatures greater than -20F(-29C)).
• 10220993RHR Radio Issue Description: Issue 1: While performing RHR radio reflash (software update), on rare occasions, the flash can fail to properly update the radio resulting in the radio running in Emergency IFS mode. This error condition can occur due to interrupting the software update, background radio operations interfering with the reflash process, etc. The radio will reboot, but with limited functionality ( may include but are not limited to: NAV, Voice Recognition, Bluetooth, or AUX jack are inop, no available space shown on HDD, etc.). The radio can still be properly updated by simply reinserting the software update disc and performing the reflash procedure again. To assist in the verification that the radio is running Emergency IFS perform the 1. Power on radio~ 2. Press MENU H/K~ 3. Press System Setup S/K~ 4. Press Manage HDD S/K~ 5. Press Display Available Space on HDD S/K~ 6. When running Emergency IFS, all items under Used, Available, and Capacity report as dashes Issue 2: If you are having troubles connecting a phone or a MP3 player, try removing the battery on the device and then going through the pairing/connection procedure again. If you cannot remove the battery on the device, perform a reboot. Each manufacturer has a different series of buttons to hold down to perform a reboot. If the problem still persists, try the device on another like vehicle with the same radio. If you are having the same connection issues on another like vehicle, the device may be faulty or it may not be compatible with the RHR radio. Go to www.chrysler.com/hostb/crossbrand/owners/en and click on ?Bluetooth Phone Compatibility Test Results? link for a list of phones that are compatible. For MP3 players and media storage devices, only .wma, .aac, .mp3, .sacd, .jpeg & .jpg files are supported. Remove all other file types and reevaluate the concern. Issue 3: If upgrading a vehicle from a low line radio that has factory installed UConnect
• 10220868Transfer Case Gear Motor/Actuator Installation Guidelines.
• 10220837GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
• 10220687Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
• 10220611Dual EVAP System Extreme Duty Vapor Canister Filter Kit This informational bulletin is to make technicians aware that an EVAP dual vapor canister filter kit(Mopar part #68478013AA)is available in place of the OEM single vapor canister filter.This kit should not be installed on vehicles driven in normal conditions that are not subjected to the below symptom/conditions. Customers operating fleet or severe/extreme duty gasoline vehicles in continuous dusty driving conditions can plug the single OE filter system and may experience a Malfunction Indicator Lamp (MIL) illumination. Upon furtherinvestigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:P0441 - EVAP Purge System Performance. P062A - Fuel Pump Control Performance. Customers may also experience the following conditions:Hard to fill fuel tank with fuel. Premature shut-off of the gas nozzle when refueling. Flow back of fuel while refueling.
• 10220561Rattle Tapping Fluttering Noise From A Pillar Or Dash Driving At Highway Speeds
• 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
• 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
• 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.

Every Dodge RAM 1500 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.