2011 Ford Explorer
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Explorer › 2011
These records cover every 2011 Ford Explorer. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2011 Ford Explorer. Newest first.
Ford Motor Company (Ford) is recalling certain 2011-2019 Explorer vehicles. The A-pillar trim retention clips may not be properly engaged, allowing the trim to detach.
Risk and remedy
Risk
A detached trim piece can fall off the vehicle, becoming a road hazard and increasing the risk of a crash.
Remedy
Dealers will inspect and replace the A-pillar trim as necessary, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model years. Owner notification letters were mailed between July 18, 2024 and December 16, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S02.
Ford Motor Company (Ford) is recalling certain 2011-2013 Explorer vehicles originally sold, or currently registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia…
Risk and remedy
Risk
A rear toe link fracture can result in a loss of steering control, increasing the risk of a crash.
Remedy
Dealer will inspect for the presence of a CABJ. If a CABJ of any design is found, the dealer will inspect the tightness of the CABJ, and replace the CABJ, knuckle, and/or toe link as necessary, free of charge. Interim notification letters were mailed November 10, 2021. Owner notification letters were mailed on March 17, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S43.
Ford Motor Company (Ford) is recalling certain 2011-2017 Explorer vehicles. The rear suspension toe links may fracture due to stress on the rear suspension.
Risk and remedy
Risk
A fractured rear toe link will cause a sudden change in vehicle handling and increase the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the rear suspension toe links, and inspect both rear toe link ball joints, replacing the rear wheel knuckle(s), if necessary, free of charge. The recall began June 26, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S17.
Ford Motor Company (Ford) is recalling certain Wheel Hub Bearing assemblies, part number HB5Z-1104-C, incorrectly listed as being for installation on the rear axles of 2011-2017 Ford Explorer 4X2 vehicles. These bearings assemblies were manufactured without a self retention feature, possibly resulting in the separation of the wheel or wheel end.
Risk and remedy
Risk
A loss of the wheel or wheel end can increase the risk of a crash.
Remedy
Ford will notify the distributors of the hubs specifying that they are to only be used on drive axles. It is believed that none of the hubs were purchased from Ford dealers for the incorrect application. Owners may contact Ford customer service at 1-866-436-7332.
Ford Motor Company (Ford) is recalling certain model year 2011-2013 Explorer vehicles. In the affected vehicles, the interior door handle return spring may unseat, resulting in interior door handle that does not return to the fully stowed position after actuation.
Risk and remedy
Risk
If the interior door handle return spring is unseated, the door may unlatch in the event of a side impact crash, increasing the risk of personal injury.
Remedy
Ford will notify owners, and dealers will inspect all four of the interior door handles and either repair or replace them, free of charge. The recall began on July 23, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S11.
Ford Motor Company (Ford) is recalling certain model year 2011-2013 Ford Explorer vehicles manufactured May 17, 2010, through February 28, 2012. The affected vehicles may experience an intermittent connection in the electric power steering gear, which can cause a loss of the motor position sensor signal resulting in a shut down of the power steering assist.
Risk and remedy
Risk
If the vehicle experiences a loss of power steering assist it will require extra steering effort at lower speeds, increasing the risk of a vehicle crash.
Remedy
Ford will notify owners, and dealers will update the Power Steering Control Module (PSCM) software, free of charge. If a vehicle shows a history of a loss of motor position sensor signal when the vehicle is brought in for the recall remedy, its steering rack assembly will be replaced, free of charge. The recall began on July 23, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S06.
Ford Motor Company (Ford) is recalling certain replacement steering gears installed on model year 2011-2012 Explorers as service parts in September 2013 and January 2014. The affected gears may lock, preventing the driver from being able to steer the vehicle.
Risk and remedy
Risk
The inability to steer the vehicle increases the risk of a crash.
Remedy
Ford will notify owners and dealers will replace the suspect steering gears with new steering gears, free of charge. The recall began on January 29, 2014. Customers may contact Ford at 1-800-392-3673. Ford's number for this recall is 13S14.
Ford IS recalling certain model year 2011 explorer vehicles manufactured from july 15, 2010, through december 13, 2010, equipped with second row 60% seats with manual recliner mechanisms that may have components that are out of dimensional specification. these seats fail to conform to the requirements of federal motor vehicle safety standard no. 207…
Risk and remedy
Risk
In the event of a crash, the seat back may not provide the required strength, increasing the risk of injury.
Remedy
Ford will notify owners and dealers will repair the seats free of charge. the safety recall began on february 15, 2011. owners may contact ford motor company customer relationship center at 1-866-436-7332.
Owner complaints
1,198 complaints30 involved a crash4 involved a fire15 injuries
What owners report most
Latest complaints
- Steering
Estaba estacionado poniendo gas a mi exprorer y cuando la encendí el volante se puso muy duro y me marco el código P07AE-09 y también apareció falla en el sistema de dirección asistida.
- Steering
Car has a history of showing a P07AE-09 code in the power steering control module. When the code logs in the computer the car loses power steering assist while driving causing the steering to be hard to turn. Upon researching the cars recall work we seen that the car had the power steering control…
Car has a history of showing a P07AE-09 code in the power steering control module. When the code logs in the computer the car loses power steering assist while driving causing the steering to be hard to turn. Upon researching the cars recall work we seen that the car had the power steering control module software updated but no steering gear changed. My wife and children ride in this car and I'm afraid that this is going to cause a serious accident.
- Steering
I am reporting a serious safety concern involving my 2011 Ford Explorer, VIN [XXX]. After recently filling the vehicle with fuel, I went to drive it and received a “Power Steering Assist Fault” message on the dashboard. The vehicle then lost power steering assistance, making the steering extremely…
I am reporting a serious safety concern involving my 2011 Ford Explorer, VIN [XXX]. After recently filling the vehicle with fuel, I went to drive it and received a “Power Steering Assist Fault” message on the dashboard. The vehicle then lost power steering assistance, making the steering extremely difficult and requiring significantly more effort to control. The vehicle was inspected by a repair shop, and I was advised that the power steering/steering gear requires replacement at an estimated cost of $2,126.43. Because of the loss of steering assistance, I believe the vehicle is unsafe to drive and presents a serious safety risk, particularly during turns or emergency maneuvers. I understand that Ford previously recalled certain 2011–2013 Ford Explorers under NHTSA Recall 14V-286 (Ford Recall 14S06) for a defect involving the electric power steering gear that could result in loss of power steering assist. The symptoms I am experiencing appear very similar to the defect described in that recall. My vehicle does not appear to be covered by the existing recall based on its VIN. I am requesting that NHTSA review my vehicle and this failure to determine whether it should be included in the recall or whether additional action is warranted. I can provide the VIN, repair estimate, diagnostic information, photographs, and any other documentation needed. Thank you for investigating this potentially dangerous safety defect. Sincerely, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Steering
The power steering has fully stopped working , the car cannot be steered, this started to happen on the road, I had to steer the entire weight of the car myself, at fast speed it was difficult but not impossible, at slow speed and zero speed or while the vehicle is stationary it was impossible or…
The power steering has fully stopped working , the car cannot be steered, this started to happen on the road, I had to steer the entire weight of the car myself, at fast speed it was difficult but not impossible, at slow speed and zero speed or while the vehicle is stationary it was impossible or unmovable to steer. there were no warning lamps about this, the Ford dealer has not detect this in my vehicle's previous recall, further vehicle has two more recalls this year, that have been cited this year by the dealer. this needs to be addressed on their recalls because this can cause a very severe problem on the road
- Steering
On Friday 7/24/2026, I was driving and all the sudden my steering went out. Dash flashed No Power Steering Assist / AdvanTrac System Fail. I pulled over immediately to turn around & get home with zero power steering. The amount of strength to steer/control was extreme. To turn was almost…
On Friday 7/24/2026, I was driving and all the sudden my steering went out. Dash flashed No Power Steering Assist / AdvanTrac System Fail. I pulled over immediately to turn around & get home with zero power steering. The amount of strength to steer/control was extreme. To turn was almost impossible. I took my car to Ford AutoNation on Arapahoe in Centennial on 7/27/26, they ran full diagnostics & it came back that the car suffered a hard internal failure (DTC U3000) of the electronic Power Steering Control Module, creating an immediate, dangerous loss of steering assist while driving. This vehicle was subject to Federal Safety Recall 14S06 (NHTSA Campaign 14V286000). According to official Ford OASIS data, Ford attempted to remedy this safety defect in 2014 using a software reflash shortcut (Labor Code 14S06A) rather than replacing the physical defective hardware. I have a text (via their service dept) from the service manager as well stating "it was a reflash" when I asked which labor code was done under the 14S06; "was it the software reflash or the full rack replacement?". I have a formal case with Ford Corporate created 7/31/26, and have that number as well. IBecause Ford's software patch completely failed to prevent the component's internal hardware failure, the original federally mandated safety defect remains active, unresolved, and dangerous in this chassis. Ford Corporate is refusing to honor the recall remedy because the vehicle is past an arbitrary 10-year limit on their internal customer satisfaction extensions, violating the permanent nature of safety recalls. I stated I would be filing with the NHTSA and they pushed my information on to the Safety Auto Office on 7/31/26.
- Steering
The contact owns a 2011 Ford Explorer. The contact stated that while attempting to start the vehicle, the message "Power Steering Assist Fault" was displayed and the vehicle failed to start. The contact stated that the failure reoccurred after starting the vehicle, and the steering wheel locked up.…
The contact owns a 2011 Ford Explorer. The contact stated that while attempting to start the vehicle, the message "Power Steering Assist Fault" was displayed and the vehicle failed to start. The contact stated that the failure reoccurred after starting the vehicle, and the steering wheel locked up. The dealer was contacted, but the vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Numbers: 14V286000 (Steering) and 14E001000 (Steering); however, the VIN was not included. The manufacturer was not contacted. The failure mileage was approximately 140,000.
- Steering
The contact owns a 2011 Ford Explorer. The contact stated that while driving 25 MPH, the steering wheel became difficult to turn to the left or the right. The contact stated that while depressing the brake pedal, there was an abnormal rumbling sound coming from the vehicle and the steering wheel…
The contact owns a 2011 Ford Explorer. The contact stated that while driving 25 MPH, the steering wheel became difficult to turn to the left or the right. The contact stated that while depressing the brake pedal, there was an abnormal rumbling sound coming from the vehicle and the steering wheel started shaking. No warning light was illuminated. The vehicle was repaired under NHTSA Campaign Number: 14V286000 (STEERING); but the repair failed to fix the vehicle. The contact stated that the failure had occurred after the recall repair. The manufacturer was not notified of the failure. The failure mileage was 199,455.
- Structure › Body
The pillar covers fell of the vehicle when driving last week. Both plastic covers are on the side of the interstate. I was told and found there is a recall for the clips on these covers, but when I searched, they are not listed for this vehicle. There appears to be an issue with this recall and the explorer.
- Structure
The contact owns a 2011 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the dealer and manufacturer had exceeded a reasonable…
The contact owns a 2011 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the dealer and manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact stated that the trim piece was almost detached. The vehicle was not repaired. The failure mileage was unknown.
- Engine
While stopped at a stop sign my engine suddenly died, before restarting a low oil pressure light came on but went out immediately. I was approximately 40 miles from home when I got to my destination. The car was showing no signs of issues, no warning lights or errors. When I went back out to start…
While stopped at a stop sign my engine suddenly died, before restarting a low oil pressure light came on but went out immediately. I was approximately 40 miles from home when I got to my destination. The car was showing no signs of issues, no warning lights or errors. When I went back out to start it and head home it would not start. I had to pay additional expense beyond my insurance road side coverage due to the distance. I have had an independent mechanic going over the vehicle since it died. Starter has been replaced because it appeared to be the issue. (the original was bad) Once replaced while attempting to start it he found out the engine had locked up. I bought the vehicle March 30, 2026 & this happened on June 10, 2026. The vehicle had 132,344 miles on it when bought and 135,716 when it seized up. After looking through other reports I have found this to be a reported issue.
- Unknown or other
I contacted chapman ford in phila to have the recall corrected and it has been almost 2 yrs and no parts or follow up. They told me for months that the parts were backordered. My trim is loose and the rubber around my windshield almost gone. I also contacted ford main and was told an advisor would follow up and they did not.
- Structure › Body
The contact owns a 2011 Ford Explorer. The contact stated while driving at an undisclosed speed, the passenger's side exterior A-Pillar Applique Trim detached. The contact stated that the exterior A-Pillar Applique Trim was flapping and hitting the ground. The dealer was made aware of the failure.…
The contact owns a 2011 Ford Explorer. The contact stated while driving at an undisclosed speed, the passenger's side exterior A-Pillar Applique Trim detached. The contact stated that the exterior A-Pillar Applique Trim was flapping and hitting the ground. The dealer was made aware of the failure. The contact was informed that the parts were unavailable. The contact was advised to remove the detached exterior A-Pillar Applique Trim. The contact received a recall notification, NHTSA Campaign Number: 24V031000 (Structure) however the parts were unavailable. The manufacturer was not made aware of the failure. The failure mileage was approximately 1000,000.
- Structure › Body
In early 2024, we learned our 2011 Ford Explorer was under open recall (NHTSA #24V031) for the A-pillar windshield trim, which could detach and create a road hazard. For two years, our Ford dealer said repairs could not be done due to parts availability. The A-pillar trim detached three separate…
In early 2024, we learned our 2011 Ford Explorer was under open recall (NHTSA #24V031) for the A-pillar windshield trim, which could detach and create a road hazard. For two years, our Ford dealer said repairs could not be done due to parts availability. The A-pillar trim detached three separate times, including once at 75 mph on a highway, causing fear and danger. The vehicle’s elderly owner stopped driving for safety. On May 26, 2026, a non-Ford mechanic attempted a repair due to the delay at Ford, but the part broke during that attempt. The recall remains incomplete, and we have ongoing safety concerns, out-of-pocket expenses, and no timeline for a real fix.
- Electrical system · Steering
Vehicle is very hard to steer, will not reset when restarting the vehicle. two dash messages; advance track warning and power assist failure. I have not attempted to drive on road due to difficulty of steering the wheel. I am afraid the vehicle is uncontrollable at this point and needs to be towed to a repair facility. Not sure if this incident is linked to the recall under 14S06 for ford recalls.
- Visibility
The contact owns a 2011 Ford Explorer. The contact stated that after parking in the garage and turning the engine off, approximately 5 minutes later a loud noise came from the rear of the vehicle. The contact discovered that the rear hatch window had exploded and glass shards fell into the vehicle.…
The contact owns a 2011 Ford Explorer. The contact stated that after parking in the garage and turning the engine off, approximately 5 minutes later a loud noise came from the rear of the vehicle. The contact discovered that the rear hatch window had exploded and glass shards fell into the vehicle. The cause of the failure was not determined. The contact indicated that at the time of the failure the rear window defroster was not activated. The manufacturer and local dealer was not contacted. The failure mileage was 227,000.
- Steering
The contact owns a 2011 Ford Explorer. The contact stated that while driving at an undisclosed speed, the vehicle became difficult to maneuver. The message that the "Vehicle Needed Attention" was displayed on the instrument panel. The vehicle was taken to back to the residence. The contact…
The contact owns a 2011 Ford Explorer. The contact stated that while driving at an undisclosed speed, the vehicle became difficult to maneuver. The message that the "Vehicle Needed Attention" was displayed on the instrument panel. The vehicle was taken to back to the residence. The contact researched and was made aware of an unknown recall; however, the VIN was not associated with the recall. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 270,000.
- Structure
The contact owns a 2011 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that the A-pillar trim clip detached, and the vehicle was taken to the local dealer where a…
The contact owns a 2011 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that the A-pillar trim clip detached, and the vehicle was taken to the local dealer where a temporary repair was performed using tape to secure the trim. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The approximate failure mileage was 135,000.
- Steering
The steering wheel got stiff and impossible to turn. I had to use extreme force to be able to make a left turn. It happened in a large intersection. No warning appeared.
- Steering
The contact owns a 2011 Ford Explorer. The contact stated that while driving at an undisclosed speed, the steering wheel became extremely stiff. The steering wheel was extremely difficult to turn. The vehicle was not repaired. The dealer was not notified of the failure. The manufacturer was not notified of the failure. The failure mileage was 160,000.
- Structure
The contact owns a 2011 Ford Explorer. The contact stated that while driving at an undisclosed speed, the driver's side A-pillar trim on the windshield started to detach. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was…
The contact owns a 2011 Ford Explorer. The contact stated that while driving at an undisclosed speed, the driver's side A-pillar trim on the windshield started to detach. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The dealer was contacted; however, the vehicle was not diagnosed or repaired, and the dealer confirmed that parts were not yet available for the recall repair. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 116,035.
- Electrical system
The contact owned a 2011 Ford Explorer. The contact stated that while the vehicle was parked, turned off, and unoccupied, the vehicle caught fire. The contact was in her residence, and a neighbor knocked on her door, making her aware that the vehicle had caught fire. The fire has been extinguished…
The contact owned a 2011 Ford Explorer. The contact stated that while the vehicle was parked, turned off, and unoccupied, the vehicle caught fire. The contact was in her residence, and a neighbor knocked on her door, making her aware that the vehicle had caught fire. The fire has been extinguished by the local fire department. The fire department indicated that the failure may have occurred due to a wiring malfunction in the vehicle. A police report was not filed, but a fire report was filed and was unavailable. There were no injuries reported. The dealer was contacted. The vehicle was not diagnosed or repaired. The vehicle was destroyed. The manufacturer was not made aware of the failure. The approximate failure mileage was 200,000.
- Steering
The electrical power steering stopped working while in motion was real hard to steer and avoid hitting curbs or vehicles close to our vehicle. It was previously replaced by Ford for the same reason but now it happened again and they are telling me it doesn’t have warranty which is fine but if i buy the part which is not cheap by the way it just going to keep failing after a few years.
- Unknown or other
Back up camera inoperable. Screen is black. Apparently a common problem. Safety issue of hitting a person or object.
- Forward collision avoidance › Adaptive cruise control · Power train
During a red-light, as I was coming to a stop, the vehicle gave the warning saying “service power-steering now” and “traction control off.” I was unable to turn the steering wheel much due to it being so heavy. My official complaint: Vehicle: 2011 Ford Escape XLT Safety Recall: NHTSA Campaign…
During a red-light, as I was coming to a stop, the vehicle gave the warning saying “service power-steering now” and “traction control off.” I was unable to turn the steering wheel much due to it being so heavy. My official complaint: Vehicle: 2011 Ford Escape XLT Safety Recall: NHTSA Campaign Number 14V284000 (Ford Recall 14S05) Issue: Loss of Electric Power Steering Assist (EPS) / Steering Torque Sensor Fault I am submitting this complaint regarding an unresolved safety defect involving my 2011 Ford Escape XLT. This vehicle is subject to a federally recognized safety recall for loss of electric power steering assist: NHTSA Campaign Number 14V284000, Ford Recall 14S05, which involves the electric power steering (EPS) system and steering torque sensor faults that can cause the vehicle to suddenly lose steering assist. The safety issue covered under this recall is still present and represents an ongoing risk. The vehicle experiences a loss of power steering assist, which makes the steering wheel extremely difficult to turn and increases the risk of a crash, especially at lower speeds, in traffic, or during turns. On February 13, 2026, I had a scheduled appointment at Kingman Ford (Arizona) at 3:00 PM specifically to address this safety recall issue and the continuing steering assist problem. Kingman Ford declined service and refused to perform any recall-related repair, stating they could not provide service related to the recall. After the dealership refusal, I contacted Ford Corporate Customer Service directly. Ford Corporate also declined to provide any repair assistance, and stated they had no knowledge of any federal directives or requirements regarding safety issues connected to this recall. Because this is a federally recognized safety recall and the defect continues to occur, I am requesting that NHTSA document this as a recall remedy failure / unresolved safety defect, and review Ford’s refusal (and the dealership’s refusal) to correct a known steerin
- Steering
The contact owns a 2011 Ford Explorer. The contact stated that while driving at various speeds, the steering wheel was difficult to turn to the left or the right. The steering wheel seized, and the steering wheel symbol was displayed on the instrument cluster. The vehicle was turned off and…
The contact owns a 2011 Ford Explorer. The contact stated that while driving at various speeds, the steering wheel was difficult to turn to the left or the right. The steering wheel seized, and the steering wheel symbol was displayed on the instrument cluster. The vehicle was turned off and restarted to reset the steering assist function. The vehicle was taken to an independent mechanic, and the contact was informed that the electric power steering assist system needed to be replaced. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 14V286000 (Steering); however, the VIN was not included in the recall. The manufacturer was not informed of the failure. The failure mileage was approximately 180,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Windshield trim molding Item detachment
On January 27, 2023, the Office of Defects Investigation (ODI) opened PE23-001 to investigate allegations of A-pillar trim panel detachment on model year (MY) 2011-2019 Ford Explorer vehicles. At the time of opening, the office had received 164 Vehicle Owner Questionnaires (VOQs) reporting this failure. ODI has…
On January 27, 2023, the Office of Defects Investigation (ODI) opened PE23-001 to investigate allegations of A-pillar trim panel detachment on model year (MY) 2011-2019 Ford Explorer vehicles. At the time of opening, the office had received 164 Vehicle Owner Questionnaires (VOQs) reporting this failure. ODI has received 671 VOQs regarding this failure, including 1 alleged crash and 2 alleged injuries. Some consumers have reported that the failure occurred while they were driving at highway speeds, with the detached trim panel entering the path of travel of the vehicle behind them, requiring the driver of the following vehicle to take evasive action. It is noteworthy that motorists who experience this type of road hazard are less likely to accurately identify the subject vehicle the item detached from and report the event to the NHTSA. In its April 17, 2023 response to ODI’s information request, Ford provided 175 consumer complaints (including field reports) and 14,162 warranty claims related to A-pillar trim panel detachment. Ford relayed that the subject vehicles utilize a plastic A-pillar bracket, which is bolted to the vehicle structure during assembly. The A-pillar trim panel is attached to the bracket utilizing 7 plastic clips. Contributory factors which have been identified by Ford as leading to the subject defect include incomplete installation at the assembly plant, inadequate part stack up, damage to fasteners during installation, and failure to follow proper repair procedure during windshield replacements or other services. On January 19, 2024, Ford filed safety recall 24V-031 for MY 2011-2019 Ford Explorer vehicles to address the subject defect. In the Part 573 Safety Recall Report, Ford identified that a detached A-pillar trim panel can create a road hazard for other road users, increasing the risk of a crash. The recall remedy includes an inspection of the existing A-pillar trim panel and, if necessary, the replacement of the component. The remedy A-pillar trim panels will be installed with an additional adhesive for robustness and utilize an inspection procedure to ensure full engagement of all the retention clips during installation. In view of the recall action being taken by Ford, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Exhaust Odor in Passenger Cab
During the EA17-002 investigation, the agency reviewed and analyzed reports of exhaust odors in the passenger cabins of Model Year 2011 to 2017 Ford Explorers. This investigation required an approach that incorporated knowledge and expertise from the automotive, medical, environmental health, and occupational safety…
During the EA17-002 investigation, the agency reviewed and analyzed reports of exhaust odors in the passenger cabins of Model Year 2011 to 2017 Ford Explorers. This investigation required an approach that incorporated knowledge and expertise from the automotive, medical, environmental health, and occupational safety fields. The agency conducted an in-depth investigation that encompassed the review of over 6,500 consumer complaints, conducting field inspections, and testing the relevant vehicles, both independently and in coordination with Ford and other entities. During the investigation, the evolution of Ford service bulletins intended to reduce the level of exhaust odors and carbon monoxide (CO) entering the occupant compartment was examined and independent tests to evaluate the effectiveness of the final Field Service Actions (FSA) for both consumer and police vehicles were conducted. As part of the investigation, the agency also examined the effects of cracked exhaust mani-cats on the measured CO levels in the vehicles and tested the FSA repairs to ensure they did not adversely impact occupant compartment CO levels due to cracked mani-cats.The investigation identified upfitting issues for Police Interceptor vehicles. Upfitting (sirens, lights, cages, auxiliary power, etc.) is typically performed by governmental fleet operations, independent repair facilities, or local Ford dealers after the sale of the new vehicle. Sealing issues caused by upfitting were responsible for the highest measured carbon monoxide levels in tested vehicles. The police FSA instructs how to inspect the quality of the vehicle upfits and how to properly seal any leaks caused by these upfits, at no cost to the police agency. Similarly, the highest CO levels measured in consumer vehicles were usually traced to sealing issues caused by rear crash damage where the repairs did not ensure sealing integrity. The most recent Ford FSA procedure for both the police (17B25) and consumer vehicles (17N03) includes an HVAC reprogramming operation. Tests by Ford and NHTSA have demonstrated a substantial reduction of CO levels due solely to the HVAC reprogramming. Other FSA repairs also demonstrated measurable contributions to CO level reductions during controlled tests.Throughout the investigation, vehicles accurately measured with higher levels of carbon monoxide were almost always affected by upfitter alterations, damage, or other causes compromising rear passenger cabin seals.NHTSA received thousands of reports alleging odors which triggered a variety of physiological responses, predominately nausea, headaches, and lightheadedness. NHTSA focused the investigation on accurately measuring vehicle CO levels, and accurately measuring carboxyhemoglobin (COHB) levels from properly administered blood tests. Using rigorous test methods to produce exhaust gas intrusion in vehicles with a properly performed FSA, occupant compartment CO levels remained below current environmental limits for CO in any environment (EPA ambient air quality standards). Furthermore, even without FSA repairs, no vehicles unaffected by upfitter issues or prior crash damage were identified with CO levels that exceed accepted occupational CO exposure levels. This investigation finds that the 2011-2017 Ford Explorer vehicles when accurately measured produce occupant compartment CO levels which fall below current accepted health standards, and could not identify COHB levels for vehicle drivers or other occupants, which exceeded thresholds for acute physiological effects. Therefore, the agency has not identified a defect that represents an unreasonable risk to motor vehicle safety.This inve
- Ford Explorer Exhaust Odor
During the National Highway Traffic Safety Administration?s (NHTSA?s) investigation into the Ford carbon monoxide allegations, the Office of Defects Investigation (ODI) identified additional Vehicle Owner Questionnaire (VOQ) reports with similar exhaust odor claims.Presently, ODI has identified 791 VOQs for Model Year…
During the National Highway Traffic Safety Administration?s (NHTSA?s) investigation into the Ford carbon monoxide allegations, the Office of Defects Investigation (ODI) identified additional Vehicle Owner Questionnaire (VOQ) reports with similar exhaust odor claims.Presently, ODI has identified 791 VOQs for Model Year 2011-2017 Ford Explorers pertaining to exhaust odor claims.ODI has identified three crashes and 41 injuries potentially linked this issue.The reported injuries range from unspecified to loss of consciousness, with the majority being nausea, headaches, or dizziness ? all of which can be symptomatic of carbon monoxide exposure.Additionally, Ford provided 2,400 reports including owner complaints, warranty claims, dealer field reports, and legal claims, that involve 2,051 vehicles that may be connected to the exhaust odor issue.NHTSA's Vehicle Test and Research Center tested multiple vehicles, including complaint vehicles, during the investigation.ODI also conducted field inspections of complaint vehicles and crashes involving police units that occurred while the officers were on duty.When possible, data was collected to quantify carbon monoxide levels in the examined vehicles.Based on the information gathered to date, NHTSA upgraded this investigation to an Engineering Analysis (EA17-002).
- Electric power steering failure
On May 27, 2014 and amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist in approximately 179,027 model year (MY) 2011 through 2013 Ford Explorer vehicles equipped with electric power…
On May 27, 2014 and amended June 2, 2014, Ford Motor Company (Ford) submitted a Defect Information Report (DIR) to NHTSA describing a safety defect that may result in a sudden loss of power steering assist in approximately 179,027 model year (MY) 2011 through 2013 Ford Explorer vehicles equipped with electric power assisted steering (EPAS), including 82,328 MY 2011 Explorersthat are the subject of PE12-017.Ford has assigned the recall number 14S06.The NHTSA recall number is 14V-286.Ford's DIR indicates that loss of power steering assist while driving would require higher steering effort at lower vehicle speeds, which may result in an increased risk of a crash.Sudden loss of power steering assist while driving can occur in the subject vehicles if the system loses electrical power or whenever the system detects a fault that requires it to enter fail-safe mode, which removes power from the EPAS motor and defaults to manual steering.Ford's DIR indicates that the majority of steering assist failures in the recalled vehicles have been caused by an intermittent electrical connection in the Power Steering Control Module (PSCM) that can lead to a loss of the motor position sensor signal.Ford's remedy instructs dealers to check the PSCM for diagnostic trouble codes (DTC).If upon initial inspection a loss of steering assist DTC is present, dealers will replace the steering gear at no charge to the owner and update the PSCM with revised software.Following detection of a motor position sensor signal fault, the revised software will provide audible and visual warnings to the driver that a power steering system fault has been detected and will maintain steering assist for the remainder of that drive cycle.If no DTC is present, dealers will reprogram the PSCM with the revised software. Analysis of information from all sources identified a total of 969 complaints and 4,059 warranty claims related to loss of power steering assist while driving in the MY 2011 through 2012 Explorer vehicles, resulting in a complaint rate of 5.4 incidents per thousand vehicles and a warranty claim rate of 2.3 percent.ODI identified 15 crashes with evidence indicating loss of power steering assist may have been a factor.All 15 crashes involved low-speed impacts with roadside objects during turning maneuvers, resulting in minor vehicle damage or no damage.In one incident that occurred in a low-speed curve, the driver attempted to brake in response to the sudden increase in steering effort and inadvertently applied the accelerator pedal instead.This caused the vehicle to run off the side of the road and strike a wooden pole at approximately 15 mph.Another incident occurred when the driver was unable to to negotiate a left-turn at an intersection and ran off the road into a shallow ditch, resulting in moderate front-end damage to the vehicle and minor injuries to the driver that did not require medical treatment. This investigation is closed.All ODI complaints associated with this closing resume are listed in the Attachment 1.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10232579Certain 2011-2017 Model Year Explorer Vehicles Rear Wheel Knuckle Replacement REASON FOR THIS SUPPLEMENT Program Terms: added 21R01 and 21R02 REASON FOR PROVIDING A NO-COST, ONE-TIME REPAIR: added 21R01 and 21R02 OWNER NOTIFICATION MAILING SCHEDULE: added mailing schedule for 21R01 and 21R02 OASIS ACTIVATION: added 21R01 and 21R02
- 10226952Certain 2011 - 2013 Model Year Explorer Vehicles with Rear Wheel Knuckles that have been Replaced Rear Toe Link Inspection/Replacement Under Safety Recall 21S43, some of the affected vehicles that have had one (or both) rear wheel knuckle(s) replaced and were sold or operated in certain traditional corrosion areas where road salt is used extensively during winter months, may experience a seized toe link ball joint resulting in a fracture of the outboard section of the rear suspension toe link
- 10226951Certain 2011-2017 Model Year Explorer Vehicles Rear Toe Link Replacement Under Safety Recall 21S32, some of the affected vehicles exposed to a highly corrosive environment where road salt is used extensively during winter months, have experienced a seized toe link ball joint resulting in a fracture of the outboard section of the rear suspension toe link.
- 10222507Certain 2011-2017 Model Year Explorer Vehicles Rear Wheel Knuckle Replacement Ref 21S32 Submitting Owner Letter
- 10208271This program provides a no-cost, one-time repair (if needed) to the rear wheel knuckles for six (6) months from the Repair Order (RO) opening date for field service actions 21S32 or 21S43 provided that the RO opening date occurs on or before July 31, 2023. This is a one time repair. In some of the affected vehicles exposed to a corrosive environment where road salt is used during winter months, the rear toe link ball joint located in the rear knuckle could seize. A seized toe link ball joint could wear out and develop a knocking noise after installation of the updated toe links in the FSAs 21S32 or 21S43
- 10207049Some 2011-2022 Explorer and 2020-2022 Aviator vehicles may experience an inoperative roof opening panel motor. If diagnostics lead to a motor replacement, visually inspect the original motor for signs of water intrusion. If found, determine source of water leak prior to replacing the motor. Refer to Workshop Manual (WSM), Section 501-17, Pinpoint Test A for 2011-2016 and Pinpoint Test B for 2017-2022 for identifying the source of the water leak.
- 10180428Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
- 10177863This article supersedes TSB 19-2026 to update the vehicle model years affected. Some 2000 and newer Ford/Lincoln/Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended.
- 10177599These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
- 10177598These SKUs are Exhaust Manifolds with Catalytic Converters. The customer communication requested return of unsold inventory due to a loss of CARB certification. These SKUs can no longer be sold as they do not meet CARB standards, but parts on vehicles are not effected.
- 10166446This SKU is a Suspension Lateral Link. The customer communication requested return of unsold inventory to revise the design similar to the OEM supercession associated with 19V435. We have received no defects associated with the current design.
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10163573Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Use pigtail harness service part numbers 3U2Z-14S411-ZEA or CU2Z-14S411-FA, as both parts are interchangeable. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures.
- 10163552Some 2011-2019 Explorer vehicles equipped with a factory keyless entry keypad may exhibit a loose driver side B-pillar front door upper moulding. This may be caused by a lack of adhesion of the front door upper moulding to the door. To resolve the condition, follow the Service Procedure steps to reapply adhesive tape to the front door upper moulding. Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria: * 2011-2019 Explorer * Equipped with factory keyless entry keypad * Left side front door upper moulding is loose
- 10162412Customer Satisfaction Program 19N05: Certain 2011-2017 Model Year Explorer Vehicles - Carbon Monoxide Concern
- 10162064Some 2011-2015 Explorer/Police Interceptor Utility vehicles may exhibit front window glass that jumps/chatters during up/down movement. This may be due to various conditions in the window motor including excessive drive gear backlash, bushing wear, and/or excessive end play. To resolve the condition, follow the Service Procedure steps to replace the window motor, window motor connector, window regulator, upper glass run, and door glass.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10159494SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10156877Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10156863Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
- 10156856Some 2011-2019 Explorer and 2013-2019 Police Interceptor Utility vehicles may exhibit a detached center console rear cup holder and/or the cover panel detached from the rear cup holder. Follow the Service Procedure steps to correct the condition.
- 10155565Some 2009-2017 Expedition/Navigator, 2009-2014 F-150/Mustang, 2008-2009 Sable, 2008-2019 Taurus/Flex/MKT, 2013-2019 Police Interceptor Sedan/Utility, and 2011-2019 Explorer vehicles may exhibit inoperative or intermittent HVAC blower motor function at various fan speed settings. This may be due to a poor electrical connection at the blower motor speed control. If the blower motor speed control is determined to be the causal part, replacement of the electrical connector pigtail harness (14S411) to the blower motor speed control is also recommended to avoid repeat repairs. Refer to Wiring Diagram, Cell 5 for recommended splicing procedures. Refer to Wiring Diagram, Cells 54/55 to obtain the service pigtail connector part number.
- 10155551Some 2000 and newer Ford, Lincoln and Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended. Follow the Service Procedure steps to correct the condition
- 10155444Some 2011-2019 Explorer and 2013-2019 Police Interceptor Utility vehicles may exhibit a detached center console rear cup holder and/or the cover panel detached from the rear cup holder. Follow the Service Procedure steps to correct the condition.
- 10152473For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. For all turbocharged engine applications, the turbocharger oil supply filter (6C683 gas engine/6L625 connector style or 6A968 diesel engine) must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137131Some 2007-2016 Edge/MKX/Flex/MKT/MKZ/MKS/Taurus/Police Interceptor Sedan/Explorer/Police Interceptor Utility vehicles equipped with AWD and built on or before 30-Jun-2016 may exhibit a propane or natural gas odor during idle or low speed driving. This may be due to break down of the power transfer unit (PTU) fluid caused by excessive heat. If the source of the odor is identified as originating from the PTU, an idler bearing repair kit is available to repair the PTU. Refer to the Workshop Manual (WSM), Section 308-07. If the PTU is determined to be repairable, utilize kit GB5Z-7P258-A and the included instruction sheet. For claiming use causal part 7P258 and applicable labor operations in section 07 of the Service Labor Time Standards (SLTS) Manual.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 101365972010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
- 10127405Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
- 10125095Certain 2011-2017 Model Year Explorer Vehicles - Carbon Monoxide Concerns
- 10125093Certain 2011-2017 Model Year Explorer Retail Vehicles - Carbon Monoxide Complaints
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 10099076Some 2011-2015 explorer vehicles may exhibit an exhaust odor in the vehicle with the auxiliary climate control system on. Customers may indicate the odor smells like sulfur, or that exhaust odors are entering the vehicle cabin. This condition may be worsened when the climate control system IS in recirculate mode and the vehicle IS heavily accelerated for an extended period. Whether and to what extent any customer or occupant of a 2011-2015 explorer vehicle experiences the exhaust odor will be affected by driving habits, weather and individual sensitivities.
- 10095995Some 2010-2016 epas equipped vehicles may exhibit steering related noises. The workshop manual (wsm) diagnostic procedures have been updated in section 211-02. When diagnosing and repairing epas steering noises use the updated procedures.
- 10095858Some 2007-2016 edge/mkx/flex/mkt/mkz/mks/taurus/taurus police/explorer/explorer police equipped with all wheel drive (AWD) and built on or before 30-jun-2016 may exhibit a ticking and/or knocking noise coming from the driveline area. To identify this noise, refer to workshop manual (wsm), section 100-04, and follow the symptom chart. If the source of the noise IS identified as the ptu and/or internal to the ptu, disassemble ptu assembly. Refer to updated wsm, section 308-07. If the ptu IS determined to be repairable, utilize kit gb5z-7p258-a and the included instruction sheet. For claiming, use causal part 7p258 and applicable labor operations in section 07 of the service labor time standards (slts) manual.
- 100958492011-2015 explorer and MKT vehicles requiring replacement of right front axle shaft no longer require installation of the center support bearing heat shield(7f469). The heat shield can be discarded.
Every Ford Explorer model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.