1977 Ford F250
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1977 Ford F250. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
6 recalls name the 1977 Ford F250. Newest first.
Certain federal-mogul aftermarket fuel pumps sold under the brand names of carter, accuflow, napa, truflow, parts depo, and parts master, shipped between august 2006 and july 2007 for use on the vehicles listed above. the fuel pump diaphragm in certain production runs may have been improperly installed or inadequately tested which may cause the fuel pump…
A leaking fuel pump could create a vehicle fire hazard.
Federal-mogul will notify owners and replace the defective fuel pumps free of charge. the recall began on october 15, 2007. owners can contact federal-mogul at 248-354-7700.
Some of these vehicles may be equipped with automatic transmissions that were assembled with improperly manufactured cast iron extension housings. The housings have mislocated cast cam plate stops. A mislocated stop may prevent the transmission from locking in the park position when the gear shift selector lever IS placed in the "p" (park) position. If this…
Dealer will inspect and, if necessary, replace the transmission extension housing without charge to owner.
On the involved vehicles, the manual steering gears may contain steering gear recirculatory balls that could fracture. This fracturing IS a result of improper heat-treatment during manufacture and can eventually cause increased steering effort.
The dealer will inspect and, if necessary, replace the ball bearings of the steering gear, without charge to owner.
Some of the involved vehicles may have defective carburetors in which, under certain circumstances, the secondary throttle plates may stick open.
Dealer will inspect and, if necessary, replace the carburetor at no charge to owner.
The involved vehicles may experience fuel leakage at the rubber hose connecting the fuel inlet tube to the carburetor filter. This leakage condition IS due to insufficient insertion of the fuel tube into the hose or improper positioning of the hose clamp, causing the clamp to be crimped directly over the fuel tube bead.
Dealer will replace the existing fuel hose clamp with a spring-type clamp at the hose-to-fuel inlet tube connection, and adjust the connection where necessary, without charge.
The upper support strap nuts, attaching the fuel tank, were not tightened to specifications. This may allow the fuel tank to detach and fall to the ground.
Dealer will tighten attaching nuts to proper specifications to secure the fuel tank, at no cost to owner.
After installing an off market brake product onto vehicle called tekonsha brake system, manufactured by voyager, learned that system will not brake in reverse. Please provide any further details. *ak
Bed liners and steel gas cans create static electricity which ignited, causing the consumer and his vehicle to catch on fire.*ak consumer sustained first and second degree burns in incident. *slc
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.