2021 Hino Conventional Models
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hino › Conventional Models › 2021
These records cover every 2021 Hino Conventional Models. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2021 Hino Conventional Models. Newest first.
Hino Motors Sales U.S.A., Inc. (Hino) is recalling certain 2020-2024 NE7A, NE7B, NE8A, NH9A, NJ7A, NJ7B, NJ8A, NJ8J, NV7A, NV7B, and NV8A vehicles equipped with 70 or 90 gallon fuel tanks. The fuel sender float may deform and detach, which can lead to an inaccurate fuel gauge reading.
Risk and remedy
Risk
An inaccurate fuel gauge may result in the vehicle unexpectedly running out of fuel and stalling, increasing the risk of a crash.
Remedy
Dealers will replace the fuel sender gauge, free of charge. Owner notification letters were mailed October 5, 2023. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is AAV70.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11000898This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
- 11000897After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
- 10235337The purpose of this procedure is to provide instructions in how to properly record Nox Sensors using DX3
- 10231442Conventional diesel particulate filter (dpf) aasw0
- 10231440Conventional nitrogen oxide (nox) sensor aapd0
- 10231439Recovering the doser control unit (dcu) after a failed programming event dcu blank. Tt-23-011
- 102289392011MY-2021MY CONVENTIONAL EXTERIOR MIRROR STAY. The subject vehicle may experience an exterior mirror stay that is loose or drifts slightly from its position. An enhanced mirror stay, mirror stay mount, related fasteners and revised torque specifications have been released to correct this condition. This procedure provides directions for installation of the enhanced components. Reports of looseness have accompanied reports that vehicle operators have folded exterior mirrors inward. As clearly stated in the Hino owners manual, the structure of the mirror stay does not allow for folding.
- 10227282The purpose of this procedure is to provide instructions in how to properly record NOx sensors using DX3.
- 10227281The purpose of this procedure is to provide instructions in performing an injection quantity test on 2011 and newer Conventional or COE series trucks with DX3.
- 10227279The purpose of this procedure is to provide instructions in performing DCU programming on 2011 and newer Conventional or COE series trucks.
- 10227276The purpose of this procedure is to provide instructions in how to perform a manual regen recording on Hino Trucks equipped with a 5th or 7th exhaust fuel injector with DX3.
- 10227271This parts alert is to inform our dealers that when ordering part number 16400E0E62 passenger side radiator support, it will come with an extra bracket as shown below. When replacing the radiator support brackets, the new passenger side support can be installed with no issues
- 10213495Conventional after turbo catalyst (atc) aapa0. Wp-22-010
- 10213492Conventional particulate sensor (pm) sensor aap60. Wp-22-008
- 10206065EDGE INSTALLATION GUIDE COE (CAB OVER ENGINE) This procedure will take you step-by-step for installing Bosch hardware on a 2020 and newer Hino COE 195-195h. BULLETIN NO: A-21-005
- 10206060EDGE TELEMATICS INSTALLATION GUIDE - CONVENTIONAL. This procedure will take you step-by-step for installing the Bosch telematics hardware on a 2020 and newer Hino Conventional 238-338. BULLETIN NO: A-21-004
- 10206057SB-21-011 CONVENTIONAL LANE DEPARTURE WARNING (LDW) CAMERA HARNESS REPAIR Subject vehicles equipped with a LDW (Lane Departure Warning) system may exhibit a condition of the engine remaining on after the ignition key is turned to the lock position and removed. In the event that a subject vehicle exhibits this condition, inspect the LDW wiring harness and wires for a pinched wire condition by removing the LDW camera mounting bracket at the roof panel. If the pinch condition is identified, follow the steps in this TSB (Technical Service Bulletin) to repair the condition.
- 10201819Tt-21-008 conventional ABS, esc, cms and ldw diagnosis tech tip
- 10189453BOSTROM - LTSS (LIGHT TRUCK SUSPENSION SEAT) DESIGNED TO FIT THE HINO 155 & 195 COE ? Proven to reduce vibration to the occupant compared to the conventional static seat = LESS FATIGUE ? The suspension system can easily be adjusted to the weight of the driver
- 10189439Hino Trucks floor mats. Black durable rubber floor mats with the red Hino Trucks emblem. Easy to shake out the dirt and debris or clean it with soapy water.
Every Hino Conventional Models model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.