2023 Hino Conventional Models
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hino › Conventional Models › 2023
These records cover every 2023 Hino Conventional Models. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2023 Hino Conventional Models. Newest first.
Hino Motors Sales U.S.A., Inc. (Hino) is recalling certain 2020-2024 NE7A, NE7B, NE8A, NH9A, NJ7A, NJ7B, NJ8A, NJ8J, NV7A, NV7B, and NV8A vehicles equipped with 70 or 90 gallon fuel tanks. The fuel sender float may deform and detach, which can lead to an inaccurate fuel gauge reading.
Risk and remedy
Risk
An inaccurate fuel gauge may result in the vehicle unexpectedly running out of fuel and stalling, increasing the risk of a crash.
Remedy
Dealers will replace the fuel sender gauge, free of charge. Owner notification letters were mailed October 5, 2023. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is AAV70.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 1100858922-23 MY L-SERIES RADIATOR RETROFIT The service part radiator (P/N 16400EW080) installed on 2022 and 2023 model year L-Series Hino vehicles has been discontinued and may not be available.
- 110031582022-2023 my l-series auxiliary transmission oil cooler line connection tech tip no: 24-007
- 11000898This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
- 11000897After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
- 10235345L-SERIES ANTI-LOCK BRAKE SYSTEM (ABS) MALFUNCTION MESSAGE. If Wabco fault SPN 807 FMI 13 is stored in the ABS module, confirm if the vehicle is equipped with traction and stability control. If the vehicle is NOT equipped with the traction and stability control option, inspect the front brake relay valve under the cab to see if the chassis harness connector is plugged into the front brake relay valve. If the chassis harness connector is plugged into the front brake relay valve, this connector should NOT be connected. Disconnecting the connection at the front brake relay valve and clearing the code from the ABS module will resolve the active Wabco fault code.
- 10231438Cummins ecu parameter changes requires OEM2 password. Tt-23-010
Every Hino Conventional Models model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.