2008 Hyundai Elantra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Elantra › 2008
These records cover every 2008 Hyundai Elantra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2008 Hyundai Elantra. Newest first.
Hyundai Motor America (Hyundai) is recalling certain 2007-2010 Elantra and 2009-2011 Elantra Touring vehicles. On February 21, 2020 Hyundai expanded the recall to include 46,425 model year 2007-2008 Entourage and 2007 Santa Fe vehicles. Moisture may enter the Anti-lock Brake (ABS) Module and result in an electrical short.
Risk and remedy
Risk
An electrical short within the ABS Module may cause an engine compartment fire, even when the car is turned off, increasing the risk of an injury.
Remedy
Hyundai will notify owners, and dealers will install a relay in the vehicle's main junction box to prevent the risk of an ABS short-circuit while the car is turned off, free of charge. The recall began April 2, 2020. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 188.
Hyundai Motor America (Hyundai) is recalling certain model year 2008-2010 Elantra vehicles manufactured June 1, 2008, to April 30, 2010, and 2009-2010 Elantra Touring vehicles manufactured November 1, 2008, to April 30, 2010. The electronic power steering (EPS) electronic control unit (ECU) may sense a discrepancy in the steering input signals and, as a…
Risk and remedy
Risk
If power steering assist is lost, greater driver effort would be required to steer the vehicle at low speeds, increasing the risk of a crash.
Remedy
Hyundai will verify the proper operation of the Electronic Power Steering (EPS) and update the EPS control unit, free of charge. The recall began April 14, 2015. Owners may contact Hyundai customer service at 1-855-671-3059. Hyundai's number for this recall is 127.
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled…
Risk and remedy
Risk
Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
Hyundai IS recalling certain model year 2007-2009 elantra vehicles manufactured from july 14, 2006, through november 1, 2008. the front passenger seats in the vehicles contain a weight sensor designed to deactivate the right frontal airbag when occupants of certain weights occupy the seat. the electrical connector for the weight sensor IS located under…
Risk and remedy
Risk
The front passenger air bag could deploy in crashes in which it should not deploy, increasing the risk of injury to the seat occupant from the deployed air bag.
Remedy
Dealers will install a protective cover over the weight classification system connector to prevent contamination. this service will be performed free of charge. the safety recall IS expecting to begin during april 2011. owners may contact hyundai's customer assistance center at 1-800-633-5151.
Hyundai IS recalling certain model year 2007-2008 elantra vehicles manufactured from july 14, 2006, through august 29, 2007. the driver's seat track position sensor determines the seat's fore and aft position and allows the driver's frontal air bag to deploy at the pressure appropriate for that seating position, with a lower pressure deployment in the most…
Risk and remedy
Risk
A higher pressure deployment than intended increases the risk of injury resulting from airbag deployment.
Remedy
Dealers will reprogram the air bag control module free of charge. the safety recall IS expecting to begin during april 2011. owners may contact hyundai's customer assistance center at 1-800-633-5151.
Hyundai de puerto rico (hpr) IS recalling 347 my 2008 elantra vehicles. the fuel pump motor may not have the proper, uniform internal electrical surface contact. this may cause the fuel pump to produce less pumping pressure than required to supply the fuel injection system.
Risk and remedy
Risk
As a result, poor engine staring and hesitation may result. other engine performance issues may also result and lead to a crash.
Remedy
Dealers will replace the vehicle's fuel pump subassembly. the recall began on february 9, 2009. owners may contact hpr at 1-800-981-0188.
Hyundai IS recalling 65,000 my 2008 elantra vehicles with 2.0 liter beta engines. the fuel pump motor may not have the proper uniform internal electrical surface contact. this may cause the fuel pump to produce less pumping pressure than required to supply the fuel injection system.
Risk and remedy
Risk
Poor engine starting and hesitation may result. other engine performance issues may also result increasing the risk of a crash.
Remedy
Dealers will replace the fuel pump subassembly free of charge. the recall began on september 15, 2008. owners may contact hyundai at 1-800-633-5151.
Owner complaints
315 complaints38 involved a crash24 involved a fire41 injuries
What owners report most
Latest complaints
- Electrical system · Firerelated
The contact owned a 2008 Hyundai Elantra. The contact stated that upon pulling into the driveway, the power steering and ABS warning lights illuminated. After researching the warning lights online, the contact turned off and exited the vehicle. The contact became aware of smoke coming from…
The contact owned a 2008 Hyundai Elantra. The contact stated that upon pulling into the driveway, the power steering and ABS warning lights illuminated. After researching the warning lights online, the contact turned off and exited the vehicle. The contact became aware of smoke coming from underneath the hood. Upon opening the hood, the contact noticed that the under hood was on fire and called the Fire Department. The Fire Department arrived on the scene and extinguished the fire. The contact was informed that fire had originated under the dashboard nearby the computer. The vehicle was inspected, towed, and then deemed a total loss by the insurance company. The contact stated that the vehicle was previously repaired for an engine overheating failure two weeks prior to the fire. The failure mileage was approximately 115,000.
- Steering
Power steering went out, only had manual steering.
- Service brakes, hydraulic
The contact owns a 2008 Hyundai Elantra. The contact stated that a week after the dealer performed the recall repair under NHTSA Campaign Number: 20V061000 (Service Brakes, Hydraulic); the contact was made aware that the brake lights had remained illuminated after the vehicle was parked and turned…
The contact owns a 2008 Hyundai Elantra. The contact stated that a week after the dealer performed the recall repair under NHTSA Campaign Number: 20V061000 (Service Brakes, Hydraulic); the contact was made aware that the brake lights had remained illuminated after the vehicle was parked and turned off. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 199,950.
- Electrical system · Engine · Service brakes
The car was being driven nomore than 1hr. It began to smoke under the hood. The ABS EMERGENCY BRAKE LIGHT, CHECK ENGINE Then the EPS lights were on. The vehicle was pulled over and stopped. Fire was then observed falling from under the car. The hood was then popped to see the engine mainly on the…
The car was being driven nomore than 1hr. It began to smoke under the hood. The ABS EMERGENCY BRAKE LIGHT, CHECK ENGINE Then the EPS lights were on. The vehicle was pulled over and stopped. Fire was then observed falling from under the car. The hood was then popped to see the engine mainly on the driver side was totally catching fire. Then it spread. The engine needle never showed over heated. The car took no more than 6 minutes to catch fire from the time it started smoking. It was very scary
- Electrical system · Service brakes · Unknown or other
The engine bay of my car caught fire due to the abs pump and module not turning off. I bought a part but never opened the box because I received a piece of mail stating the recall of that exact issue that they would replace all parts damaged. Which they didn't just installed their relay After…
The engine bay of my car caught fire due to the abs pump and module not turning off. I bought a part but never opened the box because I received a piece of mail stating the recall of that exact issue that they would replace all parts damaged. Which they didn't just installed their relay After Hyundai recall 188 was completed, my ABS pump failed. I believe it was caused by continuous power being applied post-shutdown — the exact defect the recall was meant to fix. The dealer performed an inspection but misrepresented the results and refuses to replace the damaged component under recall. This ABS pump failure is a direct result of the original recall condition — or a failed installation of the relay fix — which continued to keep power applied to the pump while the vehicle was off. This is the exact scenario the recall was intended to prevent. If the failure is caused by that condition, Hyundai is still responsible under recall. The facility which did the recall falsely recorded the mileage on my vehicle as to void any "warranty" associated with the recall as the car hasn't been driven since the module was replaced. I also instructed the diagnosis team of Wesley chapel Hyundai to keep my battery unplugged due to the parasitical drain in order to protect the battery from being dead celled and now I have to replace the battery as well. They also illegally opened a mailed box I had in my car with a part I bought prior to the recall being mailed out which I never took out of the box nor did I open the box and it was fully sealed which is a federal crime. I opened a case in which Hyundai denied helping with this faulty service and are refusing to provide me documents Case no. 41355389.
- Fuel/propulsion system · Unknown or other
Has not yet been officially diagnosed by a dealer or independent service center, but while turning into a neighborhood at around 15-25 mph the car jerked and the engine suddenly stalled while I was still in the middle of the road. Thankfully I rolled into the neighborhood before an oncoming car…
Has not yet been officially diagnosed by a dealer or independent service center, but while turning into a neighborhood at around 15-25 mph the car jerked and the engine suddenly stalled while I was still in the middle of the road. Thankfully I rolled into the neighborhood before an oncoming car made its way over, but it was close. The gas pedal no longer worked, and I had to restart the car. It only drove once more before shutting down and the engine will no longer turn over.
- Service brakes · Structure › Body · Suspension
The entire undercarriage of the vehicle is rusted, allowed for 3 sections is not sufficient as it does not accurately account for the damage. The Fuel Suspension is also affected from the known Corrosion and Rust issue. I have had to make many costly repairs in the last 4 years and I did not know…
The entire undercarriage of the vehicle is rusted, allowed for 3 sections is not sufficient as it does not accurately account for the damage. The Fuel Suspension is also affected from the known Corrosion and Rust issue. I have had to make many costly repairs in the last 4 years and I did not know about this issue with the vehicle I have now had for 17years. Had I , I would have done my own repairs to ensure the unit was safe and operational and not only relied on Hyundai's very delayed and subpar solution - considering my unit is a 2008 and the campaign did not come out until May 2014, of which I know for a fact my car was never listed.
- Fuel system, gasoline › Delivery › Fuel pump
The contact owns a 2008 Hyundai Elantra. The contact stated while driving 30 MPH, the vehicle started jerking and stalled. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who diagnosed the vehicle with fuel pump failure. The contact stated that the vehicle…
The contact owns a 2008 Hyundai Elantra. The contact stated while driving 30 MPH, the vehicle started jerking and stalled. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who diagnosed the vehicle with fuel pump failure. The contact stated that the vehicle stalled intermittently. The vehicle was not repaired. The dealer was not made aware of the failure. The manufacturer was not made aware of the failure. The failure mileage was approximately 172,600.
- Service brakes · Steering
I want to go start my car just now to go to the store and when I turned it on and started it up the ABS lights emergency brake light and EPS light always lit up on my dashboard so I grabbed the manual to try to figure out what it is seen what each was individual thing standard for so I googled each individual and that's when I realized there's a recall for this from my vehicle for the ABS malfunction
- Carry handle, shell, base · Other/i am not sure
When we rotate the car seat to lock it in place, the shell doesn't immediately lock in and we have to try several times to get it to lock in. Weve had this issue happen multiple times and fear for our son's safety. Our son's safety was put at risk when it didn't immediately lock into place. It has not been inspected by any one.
- Air bags
The contact owned a 2008 Hyundai Elantra. The contact stated that while the wife was driving at 30 MPH, the contact's wife was involved in a no-fault accident. The other vehicle involved was a 2020 Yukon Denali, which ran a stop sign and crashed the front driver's side. The contact stated that…
The contact owned a 2008 Hyundai Elantra. The contact stated that while the wife was driving at 30 MPH, the contact's wife was involved in a no-fault accident. The other vehicle involved was a 2020 Yukon Denali, which ran a stop sign and crashed the front driver's side. The contact stated that none of the air bags deployed. The contact's wife was taken by ambulance to the hospital for medical attention. A police report was filed. The vehicle was towed to an impound lot. The vehicle was condemned to total loss by State Farm. The contact stated his wife suffered bruises and a herniated fifth disk in her back that required medical attention. The manufacturer was not made aware of the failure. The failure mileage was approximately 31,200.
- Electrical system
We received a citation for brake lights not functioning. I realized that there had been a safety recall on the brake light switch, and contacted Brandfon Hyundai in New Haven, CT. They did nothing. Upon further investigation on the Hyundai website, I noticed that the brake light switch campaign…
We received a citation for brake lights not functioning. I realized that there had been a safety recall on the brake light switch, and contacted Brandfon Hyundai in New Haven, CT. They did nothing. Upon further investigation on the Hyundai website, I noticed that the brake light switch campaign was marked "closed" in 2013, when the car was still owned by my mother-in-law whom has since gone blind and has sold the car to us. I took it upon myself to purchase and install a new brake light switch, and all new bulbs, but to no avail. Not only are we likely to get cited again, but having no brake lights is a safety hazard. At first, it was only the right side brake light out. Then the brake lights would stay on by themselves. Now, not even the rear window light, which should go on without the signal going through the computer, will go on.
- Air bags
While making a U-turn in a parking lot I accidentally ran over a pothole. Upon doing so the driver's airbag deployed burning a hole through my shirt and leaving burns on my stomach and arms. No other part of the vehicle was affected.
- Unknown or other
This unit was purchased from RockAuto in July 2023; they sent another defective product. When the rear engine mount was installed on the subframe--one bolt was not getting tight and a bolt inside the unit was already broken. This may have caused the disjointed connection for this rear engine mount.
- Suspension
The sway bar was received in July 2023 and the sway bar was manufactured too short to fit the suspension of the 2008 Hyundai Elantra. The vendor was RockAuto and this is another defective product they sent.
- Engine and engine cooling
The contact owns a 2008 Hyundai Elantra. The contact stated that while idling at a stop sign, the RPMs dropped extremely low, and the vehicle stalled. After a visual inspection, the contact observed white smoke coming from the engine compartment and a coolant leak underneath the vehicle. Upon…
The contact owns a 2008 Hyundai Elantra. The contact stated that while idling at a stop sign, the RPMs dropped extremely low, and the vehicle stalled. After a visual inspection, the contact observed white smoke coming from the engine compartment and a coolant leak underneath the vehicle. Upon restarting the vehicle, the vehicle seemed to return to normal functionality. The contact stated that the failure became a regular issue over the next 6 months. No warning lights were illuminated on the instrument panel. The vehicle was taken to an independent mechanic, who was unable to determine the cause of the failure. Later, the vehicle was taken to a second independent mechanic, who also failed to determine the cause of the failure. The vehicle was not repaired. The manufacturer was notified of the failure, and a case was opened. The failure mileage was 127,000.
- Unknown or other
The company, RockAuto, knowingly has many content quality errors describing automobile parts. This is a general safety concern to the general public because my rack and pinion set initially on the website said it came with both inner as well as outer tie rods. The rack and pinion set only came with…
The company, RockAuto, knowingly has many content quality errors describing automobile parts. This is a general safety concern to the general public because my rack and pinion set initially on the website said it came with both inner as well as outer tie rods. The rack and pinion set only came with inner tie rods with outer tie rods to be purchased separately. The company refunded the outer tie rods by giving a store credit.
- Engine · Unknown or other
When removing the key from the ignition, the cars engine was still running, as I was unable to turn the vehicle off. After a few tries the car was off and the engine stopped. I drove 1/2 mile, smelled something burning, looked down and saw smoke coming up from my lap area, and immediately turned…
When removing the key from the ignition, the cars engine was still running, as I was unable to turn the vehicle off. After a few tries the car was off and the engine stopped. I drove 1/2 mile, smelled something burning, looked down and saw smoke coming up from my lap area, and immediately turned the car off and jumped out of the vehicle..The engine continued to run while the key was removed... Car was eventually towed by Insurance Company tow company to the Factory Authorized service center
- Engine · Power train
2008 Elantra should be added to the crankshaft Theta II recall. 2098 Elantra has the 2.0L engine unlike its prior years where they are made with a 1.6L engine. Last week my 2008 Elantra exhibited all the signs of this malfunction (A knocking noise from the engine that increases in frequency as…
2008 Elantra should be added to the crankshaft Theta II recall. 2098 Elantra has the 2.0L engine unlike its prior years where they are made with a 1.6L engine. Last week my 2008 Elantra exhibited all the signs of this malfunction (A knocking noise from the engine that increases in frequency as the engine rpm increases. Reduced power and/or hesitation and vibration. Illumination of the “check engine” light in the instrument cluster. Illumination of the “engine oil pressure” warning lamp.) When this occured i had taken it to Auto Zone and had the computer scanned for error codes. (See attached report). Based on the report a tune up was done, ignition coil replaced and sensor replaced. Car would still not start. When my mechanic furthe diagnosed it (he could not find the issue until he used his scope camera)he found the issue was that there is damage to the "trigger wheel" inside the crank shaft. He also said this almost never happens in a car and does not know what could have made this happen. Please investigate this issue further, this is a dangerous situation of engine seizing and should be investigated immediately and thoroughly.
- Suspension
2 brake lines rusted through causing me to loose my brakes. Had the car towed to my local garage. I just got a call today letting me know that my trailing or control arm is severely rusted and has a hole. This happened before, 11/1/2017 and the car collapsed. This was covered last time under…
2 brake lines rusted through causing me to loose my brakes. Had the car towed to my local garage. I just got a call today letting me know that my trailing or control arm is severely rusted and has a hole. This happened before, 11/1/2017 and the car collapsed. This was covered last time under the Salt Belt Corrosion Class Action Settlement. Hyundai is aware there is still a problem, but the undercoating recall does not work and this is still a safety hazard and it may be the exact same part. I have called Torrington Hyundai and am waiting for the manager to call back and also called Hyundai Customer Care and new case was opened #20523632. I was told it would be 2 to 5 days to be contacted by National Consumer Affairs. I am without a car again and need this resolved immediately. This has been so dangerous, my son and I could have been killed!
- Parking brake · Service brakes
The contact owns a 2008 Hyundai Elantra. The contact stated that while driving at an undisclosed speed, the ABS system locked up. While in the parking lot, the vehicle was smoking. Additionally, while starting the vehicle, there was an abnormal high pitch winding noise detected. The parking and ABS…
The contact owns a 2008 Hyundai Elantra. The contact stated that while driving at an undisclosed speed, the ABS system locked up. While in the parking lot, the vehicle was smoking. Additionally, while starting the vehicle, there was an abnormal high pitch winding noise detected. The parking and ABS warning lights were illuminated. The vehicle was taken to the local dealer who informed him they were not equipped to service the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The approximate failure mileage was 200,000.
- Service brakes, hydraulic
The contact owned a 2008 Hyundai Elantra. The contact received notification of NHTSA Campaign Number: 20V061000 (Service Brakes, Hydraulic) and requested to be removed from the recall distribution list as she had traded the vehicle seven years ago. The local dealer was contacted. The manufacturer was not contacted.
- Electrical system · Steering
The EPS sensor trips when making a turn rendering the vehicle completely inoperable. I have to put the vehicle in park, shut it off, then turn it back on to continue moving. This is highly dangerous if it were to happen on the highway.
- Tires › Temporary/emergency spare tire
We were taking the tire off to fix a problem so we used the Jack that was provided with the car. While my arm was under the car, the Jack bended, folded, and dropped the car straight down on the pavement. It was in the proper position, and it just couldn’t hold the car up and almost seriously injured me. I’m just lucky i was quick enough to see the car falling and just got out in time to not be crushed .
- Seat belts › Front
The contact owns a 2008 Hyundai Elantra. The contact stated that after latching the front driver’s side seat belt, the locking mechanism would not immediately unlock when clicking the release button. The cause of the failure was not determined. The local dealer and manufacturer were notified of the failure but no assistance was offered. The failure mileage was 85,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Throttle control system vulnerabilities
The Office of Defects Investigation (ODI) of the National Highway Traffic Safety Administration (NHTSA) received a petition letter dated October 10, 2021, requesting an investigation of possible defects in the electronic throttle control (ETC) system on certain Kia vehicles resulting in the opening of DP21-003.…
The Office of Defects Investigation (ODI) of the National Highway Traffic Safety Administration (NHTSA) received a petition letter dated October 10, 2021, requesting an investigation of possible defects in the electronic throttle control (ETC) system on certain Kia vehicles resulting in the opening of DP21-003. Accordingly, Model Year (MY) 2005-2016 Kia Optima/K5, MY 2006-2015 Kia Sorento, MY 2007-2016 Hyundai Elantra, MY 2007-2016 Hyundai Santa Fe, MY 2006-2015 Hyundai Sonatas are all part of the subject population. The petition was originally filed as a Vehicle Owner Questionnaire that can be reviewed at NHTSA.gov under reference (ODI) number 11439675.On November 12, 2021, ODI opened Defect Petition DP21-003 to evaluate the petitioner?s request. ODI performed trend analyses of the VOQs related to vehicle speed control issues for all the subject vehicles and found that none of the 52 Model/Model Year Hyundai/Kia vehicles demonstrated any actionable trend that warranted an investigation.Petitioners submitted 1119 VOQs and non-VOQ cases in which sudden uncommanded acceleration (SUA) or loss of motive power (LOMP) incidents were alleged.For the 1119 reports, 220 were incidents involving crashes, from which 69 subject Hyundai-Kia vehicles were inspected by Hyundai/Kia dealer technicians, Hyundai/Kia engineers, and/or third-party representatives.ODI found the inspections identified no vehicle defects related to the ETC system.Of the 220 crash-involved reports, 13 Event Data Recorder (EDR) records were downloaded successfully and 11 of those indicated driver error: (i.e.) pedal misapplication.A condition where the accelerator pedal is mistakenly applied instead of the brake pedal when the driver wants to stop the vehicle.In addition, ODI reviewed a scientific journal paper published in Forensic Science International in 2016 by Mr. Park et al ., as well as related test videos. ODI does not believe there is any evidence of uncontrollable SUA occurrences in any of the tests reviewed. NHTSA's Office of Vehicle Safety Compliance (OVSC) reviewed the allegations regarding the potential noncompliance with Federal Motor Vehicle Safety Standard No. 124.Based on the information provided, the Agency concludes there is insufficient information for us to determine if a possible non-compliance exists.Finally, both Hyundai and Kia informed ODI that all their vehicles manufactured after 2012 were equipped with an ETC management system, in which the engine speed will go to idle when the system sees signals from both the brake pedal and accelerator pedal at the same time; this is commonly known as the brake-throttle override system.After thoroughly assessing the material submitted by the petitioner, information already in NHTSA's possession, information submitted by Hyundai and Kia in response to an Information Request letter, and the potential risks to safety implicated by the petitioner's allegation, NHTSA does not believe that a formal investigation is warranted. After full consideration of appropriate factors, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA?s reasons for denial of the petition will be published.
- Engine stalling - fuel pump failure
On august 19, 2008, hyundai submitted a defect information report to nhtsa concerning fuel pump failure resulting in engine stall in approximately 65,000 model year 2008 hyundai elantra vehicles with 2.0 liter beta engines produced from november 5, 2007, through june 28, 2008 (nhtsa recall no. 08V-429, hyundai…
On august 19, 2008, hyundai submitted a defect information report to nhtsa concerning fuel pump failure resulting in engine stall in approximately 65,000 model year 2008 hyundai elantra vehicles with 2.0 liter beta engines produced from november 5, 2007, through june 28, 2008 (nhtsa recall no. 08V-429, hyundai campaign 086).the recalled vehicles are equipped with fuel pumps manufactured with upper body components from a different supplier than those manufactured prior to november 5, 2007.according to hyundai, the new supplier's upper body components had incorrect dimensional characteristics resulting in misalignment of the armature shaft, which caused some of the fuel pumps to experience poor brush-to-commentator contact conditions that could result in engine stall. The use of ethanol blend fuel, containing up to 10 percent ethanol, causes a film build-up that creates high resistance between the brush and commutator.the misaligned armature shaft prevents the brush and commutator from making sufficient contact to overcome the high resistance film build-up, therefore producing less pumping pressure than required to supply the fuel injection system. Sixty-four of the complaints (72%), including the crash and injury allegation, involve the recalled vehicles.the complaint rate in the subject vehicle population IS 98.5 per 100,000 vehicles, compared with 21.4 in the remaining population, which has on average been in service over a year longer.the warranty claim rate IS also significantly higher in the recalled vehicles, which had 569 claims (0.9 percent claim rate) compared with 126 claims in the remaining population (0.1 percent claim rate). Hyundai will replace the fuel pump subassemblies in the recalled vehicles free of charge.this preliminary evaluation IS closed with hyundai's recall.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
- 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
- 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 10196546Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicles owners manual. Use of other ATF may result in improper shift quality or other drivability conditions. Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- 10190038This bulletin provides best practice recommendations when performing brake service procedures.
- 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
- 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
- 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
- 10174808This bulletin provides information on identifying dealer stock vehicles with either: A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
- 10174807The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
- 10173546This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
- 10172142This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
- 10170883This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
- 10169370The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
- 10167253This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
- 10160098This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
- 10118672Hyundai Motor America is reinstating Service Campaign TT1 which provides front and rear under body corrosion prevention treatment on certain 2007-2010 Model Year Elantra vehicles in the following salt belt states: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.
- 10110926Hyundai has announced an extended warranty for the motor driven power steering (MDPS) coupling on the following vehicles: ? 2011-2014 Sonata (YFa), 2011-2014 Sonata Hybrid (YF HEV) ? 2007-2015 Elantra (HD, MD/UD), 2009-2012 Elantra Touring (FD) The MDPS been extended to 10 years from the date of original delivery or the date of first use, or 100,000 miles, whichever occurs first. This warranty extension applies to all original and subsequent owners of the affected vehicles.
- 10110922The MDPS (motor driven power steering) assembly contains a flexible rubber coupling which may wear over time resulting in a slight "clicking" or "thud" type noise when turning the steering wheel. The warranty coverage for this coupling has been extended to 10 years from the date of original retail delivery or date of first use or 100,000 miles, whichever occurs first. This bulletin describes the service procedure to replace the coupling. Refer to the warranty and service parts information outlined in this bulletin whenever MDPS coupling replacement is required.
- 10082725This bulletin provides information on components, attributes, and precautions of the 7-speed dry-type dual clutch transmission (dct).
- 10082455"The pcm or tcm contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and relearn the pcm/tcm adaptive values. After the following repairs have been completed, the pcm/tcm adaptive values must be reset in order to provide optimum shift quality. If the procedure IS not performed, the transmission may experience a shift flare or harsh shift. H replace automatic transaxle or pcm/tcm h reprogram or exchange a pcm/tcm from another vehicle"
- 10059676Summary to be provided on a future date.
- 10059657Summary to be provided on a future date.
- 10058401Hyundai: electronic power steering (eps) warning indicator lamp will illuminate when sensing discrepancy in systems circuitry and steering assist not available and reverts back to manual steering mode. Model 2007-08,2010 elantra, 2010-12 elantra touring.
- 10055862Front and rear underbody corrosion treatment.
- 10041259Hyundai: slight rattle noise from the steering while at low speeds driving over rough roads or turning left.
- 10040952Hyundai: 2007-2009 elantra. Airbag control unit reprogramming and installation of a protective cover over the weight classification sensor. Updated 9/21/11.
- 10037906Hyundai: after a vehicle has been stored for a while and IS started there IS a check engine light and misfire codes. This IS likely due to aged fuel and carbon deposits on the spark plugs.
- 10034204Hyundai: label requirements for vehicle loading to comply with fmvss 110. Effective 6/2/08, fmvss 110 (fmvss 110) sets a threshold for correcting load capacity information indicated on tire placards when vehicle weight has been increased before retail sale. All models included after 6/2/08.
- 10033186Hyundai: absolute steering position (asp) calibration for electric power steering (eps).
- 10030984Hyundai: automatic transaxle range switch diagnostic trouble codes p0705 (range switch signal problems), p0707 (range switch open circuit), and p0708 (range switch short circuit or multiple inputs). An improperly adjusted or improperly operating range switch may result in the above mentioned conditions. Malfunction indicator light (mil) illuminated; impossible engine start in p or n.
- 10026565Hyundai: serviceability tip-rear suspension upper control arm flange bolt.
- 10026548Hyundai: motor driven power steering (mdps) system worm shaft flexible coupling replacement procedure.
Every Hyundai Elantra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.