2013 Hyundai Elantra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Elantra › 2013
These records cover every 2013 Hyundai Elantra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2013 Hyundai Elantra. Newest first.
Hyundai Motor America (Hyundai) is recalling certain 2011-2015 Elantra, Genesis Coupe, Sonata Hybrid, 2012-2015 Accent, Azera, Veloster, 2013-2015 Elantra Coupe, Santa Fe, 2014-2015 Equus, 2010-2012 Veracruz, 2010-2013 Tucson, 2015 Tucson Fuel Cell, and 2013 Santa Fe Sport vehicles. The Anti-Lock Brake System (ABS) module may leak brake fluid internally…
Risk and remedy
Risk
An engine compartment fire while parked or driving can increase the risk of injury.
Remedy
Owners are advised to park outside and away from structures until the recall repair is complete. Dealers will replace the ABS fuse, free of charge. Owner notification letters were mailed April 10, 2024 through October 11, 2024. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 251.
Hyundai Motor Company (Hyundai) is recalling certain 2013-2014 Elantra sedan, coupe and GT vehicles. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released. This will allow the brake lights to remain illuminated continuously. It can also allow the shift lever to be moved…
Risk and remedy
Risk
If the brake light switch plunger does not retract as it should when the brake pedal is not being pressed, the brake lights may stay illuminated preventing accurate communication to following vehicles that the vehicle is slowing or stopping. Additionally, if the brake switch plunger is not retracted, then the transmission can be shifted out of PARK without depressing the brake pedal. Either condition increases the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the brake pedal stopper pad, free of charge. The recall is expected to begin February 8, 2018. Owners may contact Hyundai customer service at 1-800-633-5151. Hyundai's number for this recall is 170. This campaign expands recall 16V574.
Hyundai Motor America (Hyundai) is recalling certain model 2013 Elantra vehicles manufactured December 1, 2012, to April 30, 2013. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released.
Risk and remedy
Risk
If the brake light switch plunger does not retract as it should when the brake pedal is not being pressed, the brake lights may stay illuminated preventing accurate communication to following vehicles that the vehicle is slowing or stopping. Additionally, if the brake switch plunger is not retracted, then the transmission can be shifted out of PARK without depressing the brake pedal. Either condition increases the risk of a crash.
Remedy
Hyundai will notify owners, and dealers will replace the brake pedal stopper pad with an improved part, free of charge. The recall is expected to begin on September 30, 2016. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 146.
Hyundai Motor Company is recalling certain model year 2011-2013 Elantra vehicles manufactured from November 12, 2010, through March 5, 2013. A support bracket attached to the headliner may become displaced during a side curtain airbag deployment.
Risk and remedy
Risk
If the headliner support bracket makes contact with an occupant during a crash, it may cause a laceration injury.
Remedy
Hyundai will notify owners, and dealers will apply adhesive strips to the headliner, free of charge. The safety recall began during April 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 109.
Owner complaints
1,314 complaints93 involved a crash31 involved a fire66 injuries
What owners report most
Latest complaints
- Service brakes, hydraulic
The contact owns a 2013 Hyundai Elantra. The contact stated that while attempting to start the vehicle, the engine failed to turn over, with several unknown warning lights illuminated. The contact inspected the engine compartment and there was grey smoke coming from the electrical box behind the…
The contact owns a 2013 Hyundai Elantra. The contact stated that while attempting to start the vehicle, the engine failed to turn over, with several unknown warning lights illuminated. The contact inspected the engine compartment and there was grey smoke coming from the electrical box behind the ABS Module. The vehicle was towed to a dealer where it was diagnosed, and the contact was informed that the ABS Module and wiring harness needed to be replaced, and brake fluid needed to be flushed and refilled. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 78,000.
- Air bags
Drivers air bag high resistance too high (2nd stage) B149000- PODS(passenger occupant detecting system) sensor (Bladder) Defect Start with replacing the clock spring assembly maybe be other problems. Airbag uncertain if operational. Not covered by Hyundai's Clock Spring Extended Warranty despite…
Drivers air bag high resistance too high (2nd stage) B149000- PODS(passenger occupant detecting system) sensor (Bladder) Defect Start with replacing the clock spring assembly maybe be other problems. Airbag uncertain if operational. Not covered by Hyundai's Clock Spring Extended Warranty despite fitting within model year. Unacceptable and needs to be replaced by free and expanded within coverage by Hyundai corporation.
- Unknown or other
UNKNOWN There is no incident happened.
- Service brakes, hydraulic
The contact owns a 2013 Hyundai Elantra. The contact stated that upon starting the vehicle, the ABS warning light illuminated. The following day, while the vehicle was parked in the driveway, the vehicle caught on fire. The contact's dog woke up the contact around 5:00 AM, at which point the…
The contact owns a 2013 Hyundai Elantra. The contact stated that upon starting the vehicle, the ABS warning light illuminated. The following day, while the vehicle was parked in the driveway, the vehicle caught on fire. The contact's dog woke up the contact around 5:00 AM, at which point the contact discovered that the vehicle was on fire. The Fire Department extinguished the fire and informed the contact that the fire appeared to be electrical; however, it was unknown whether a fire report was filed. The contact stated that the fire appeared to have originated underneath the hood, which left the front end of the vehicle completely burned. There was no other property damage, and no injuries were reported. A Police report was filed. The vehicle remained in the driveway, and the insurance company had not yet been notified of the fire. Upon investigation, the contact discovered that the VIN was included in NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic). Neither the dealer nor the manufacturer was notified of the failure. The failure mileage was approximately 120,000.
- Seat belts
The buckles on two of the rear seatbelts have cut through the belt horizontally - guessing from friction. I was not aware until a passenger in my back seat pointed it out to me, and it had happened on two of the three belts.
- Air bags
The contact owns a 2013 Hyundai Elantra. The contact stated that while operating the vehicle, the passenger’s side air bag warning light remained illuminated. The vehicle was taken to the local dealer, who diagnosed that the air bag module needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was 11,511.
- Service brakes
ABS AND BRAKES. The abs system malfunction causing it to run non stop draining my battery and making my brake pedal go to floor. It is available for inspection. My battery has been drained and unable to drive since brakes aren’t properly working. Matt bowers Hyundai in Slidell has confirmed it is…
ABS AND BRAKES. The abs system malfunction causing it to run non stop draining my battery and making my brake pedal go to floor. It is available for inspection. My battery has been drained and unable to drive since brakes aren’t properly working. Matt bowers Hyundai in Slidell has confirmed it is the ABS MODULE AND BRAKES FLUSH NEEDED. They are refusing to fix it for free stating I took too long to bring it in. Abs light, traction light and emergency brake light was on before failure.
- Engine
I was wondering if you can help me. I have a Hyundai Elantra that had a recall for my engine to get fixed by the dealership. I’ve never got it fixed because I was unaware of a Hyundai letter that i just found on the internet that was issued by them but I never received it. I went to a mechanic…
I was wondering if you can help me. I have a Hyundai Elantra that had a recall for my engine to get fixed by the dealership. I’ve never got it fixed because I was unaware of a Hyundai letter that i just found on the internet that was issued by them but I never received it. I went to a mechanic the other day and he informed me that they had a recall for my engine. The problem is now that Hyundai gave a date that expired on the recall. I was wondering if you can send them a demand letter or something because I was never contacted about this. I also had a brain tumor operation and Hyundai should grant me with a medical exemption. Here’s the Hyundai notice that they never gave me,
- Unknown or other · Vehicle speed control
Car developed a sudden loss of power. Would start, although roughly (took a couple of times to start), then once shifted into Drive, the engine was very sluggish, like it was stuck in a lower gear. Upon stopping and restarting the engine, the problem would sometimes resolve and the car could be…
Car developed a sudden loss of power. Would start, although roughly (took a couple of times to start), then once shifted into Drive, the engine was very sluggish, like it was stuck in a lower gear. Upon stopping and restarting the engine, the problem would sometimes resolve and the car could be driven normally, however it felt unsafe to drive at normal speeds. No warning signs appeared. After consulting with a family member with this same year and model of Hyundai Elantra, it was suggested that the crankshaft position sensor might be at fault. After researching online, we discovered that this is a common issue with 2011-2016 Elantras with a 1.8 liter engine. (Reddit forums, also this link: [XXX] ). After trying transmission and other fluid flushes without luck, we took the car to a local Hyundai dealer. They said they were unable to replicate the issue but we told them to please replace the crankshaft position sensor, which they finally did. We were charged a total of $711.40 for this repair of a simple part. Please note, another Hyundai dealer in town replaced this part for my brother's vehicle free of charge. This should be a recall item for this vehicle and it should be replaced for free. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Exterior lighting · Service brakes
My brake lights are not functioning. The fuses and bulbs are good and others have had this same issue occurring
- Electrical system · Steering · Suspension
My fiance and I, bought the vehicle in May 2022? from Carvana. His name is [XXX] . Mine is [XXX] (maiden - [XXX] ) Price. [XXX] passed away August 6, 2025. I wanted to mention this part before I explain the problem. His son is supposed to sign the car over to me as soon as court proceedings are…
My fiance and I, bought the vehicle in May 2022? from Carvana. His name is [XXX] . Mine is [XXX] (maiden - [XXX] ) Price. [XXX] passed away August 6, 2025. I wanted to mention this part before I explain the problem. His son is supposed to sign the car over to me as soon as court proceedings are finished. I love the car. But the car came from Carvana with 17K miles. It currently has 42,000K miles on it. I only drive it around town. I live in Tulsa, Oklahoma. The city is notorious for pot holes. However, I do not think this is a pot hole issue. Around December 2025, the car steering wheel started shaking vigorously. When we purchased the vehicle, the right CV axle was needing to be replaced. Now, I am not sure what the problem is, but I hate to have to trade the car in. This was my VERY first Hyundai experience, and I want to keep the car for forever, because of my fiance. But I may have to trade her in. I have come to a few conclusions on my own. 1) tires - so I had them replaced. 2) warped brake rotors 3) worn suspension components 4) worn electric steering column coupler. I wanted to give you the VIN because since it is an older vehicle (but like new to me), it may have had a recall. I do not want to keep this vehicle if it is a problem. But I also do not want to give it to anyone else since my fiance bought it for me. TO whome this may concern - if you happen to actually read these "complaints" could you give me a call at [XXX] [XXX] ) or my email: [XXX] [XXX] [XXX] I would honestly like to know if this is a huge issue with the car. At least that way I can prepare myself to sell it. I am overall very pleased with the car, except this issue is a big one, and [XXX] is not here to guide me into a decision with it. Thank you kindly, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure
The contact owns a 2013 Hyundai Elantra. The contact stated that the steering wheel felt like it was locking up. The check engine light was illuminated. The contact stated the vehicle was taken to the local dealer, where it was diagnosed that the subframe needed to be replaced. The vehicle was…
The contact owns a 2013 Hyundai Elantra. The contact stated that the steering wheel felt like it was locking up. The check engine light was illuminated. The contact stated the vehicle was taken to the local dealer, where it was diagnosed that the subframe needed to be replaced. The vehicle was previously repaired under a recall. The vehicle was taken to a collision center, and it was determined that the wax coating was sprayed over rust. The contact was a photographer and took photos of the findings. The manufacturer was contacted, but no assistance was provided. The failure mileage was 110,000.
- Air bags
The airbags failed to deploy when I was in a car accident on 03/31/26. I was rear ended while at an intersection. The car that rear ended me had airbags that deployed upon impact. My car was the only car in which the airbags did not deploy despite the high impact. Not only was I rear ended, but I…
The airbags failed to deploy when I was in a car accident on 03/31/26. I was rear ended while at an intersection. The car that rear ended me had airbags that deployed upon impact. My car was the only car in which the airbags did not deploy despite the high impact. Not only was I rear ended, but I was slammed into another vehicle in front of me and into a streetlight/streetpole. My car is now totaled. My car sustained the most damage and my body. The airbags are available for inspection upon request. I would have filed this request sooner, but I am still hurt and I am still undergoing treatment for my injuries. My safety was put at risk by the lack of protection from the airbags in my car. I could have died. I’m alive, but I also sustained serious injuries from the lack of deployment. My body hit the steering wheel upon impact. My head, chest, back, neck, shoulders, right arm, right hand, wrist, and right leg/ankle were all injured due to this accident. If my airbags had deployed, my injuries would’ve been lessened and they could’ve been prevented altogether. I was rushed to the hospital at the scene. I’m still currently receiving treatment for the injuries I sustained from this crash and lack of airbag deployment. No, the problem hasn’t been reproduced nor confirmed by the dealer. No one has inspected the vehicle. An adjuster from the at fault party has only taken pictures of the exterior of the car, but they didn’t inspect the car. There were no warning lamps, no messages, no symptoms, no problems whatsoever prior to the failure. They first appeared the day of the accident on 03/31/26. My family and I’ve had this car since 2012/2013 and it has never been in a major crash like this. The airbags have never deployed and they failed to deploy the day of this crash. There were no recalls on my car prior to the accident. All recalls have been serviced. My family and I’ve never been notified about airbag defects or airbag recalls on this car since we’ve purchased it.
- Structure › Body
Front (engine) subframe rusted out in 2026 after recall work was completed in 2023 for the known issue. Here is the service campaign information: "Service Campaign 984 2011-2016MY ELANTRA (MD/UD) UNDERBODY CORROSION PREVENTATIVE SERVICE"
- Power train
2013 Hyundai Sonata has a loud knocking noise from engine. Purchases 8/5/25 at 43K miles, currently at 44K miles. There is a Technical Service Bulletin, # 22-EM-009H dated June 2022 about an extended warranty but its time limit is questionable. Unknown and undocumented when purchased. Not listed…
2013 Hyundai Sonata has a loud knocking noise from engine. Purchases 8/5/25 at 43K miles, currently at 44K miles. There is a Technical Service Bulletin, # 22-EM-009H dated June 2022 about an extended warranty but its time limit is questionable. Unknown and undocumented when purchased. Not listed as an official recall so not covered under warranty repair and the only course of action I have been given is install a new motor quoted at $15K from local Hyundai dealer. Further research shows that driving should be limited to avoid further engine issues/fires. Occurrence since January 2026. Progressively worsening. Cause for concern. Is there an official recall on for the piston flap pending? Unsure if accident noted below is due to the issue.
- Electrical system · Engine · Unknown or other
My mother's vehicle caught fire while in park and it’s listed under a fire-risk recall. Another car got damage with the fire. I want to open a claim.
- Engine
My vehicle has a piston slap ticking issue and Hyundai will not help me fix this because it’s a common issue by Hyundai.
- Engine · Fuel/propulsion system · Power train
A significant engine failure occurred while driving, presenting as loud knocking from the engine. The issue developed without prior warning lights or messages. The vehicle was inspected by a dealership and the problem was confirmed as internal engine failure (piston slap/engine knock). The…
A significant engine failure occurred while driving, presenting as loud knocking from the engine. The issue developed without prior warning lights or messages. The vehicle was inspected by a dealership and the problem was confirmed as internal engine failure (piston slap/engine knock). The dealership recommended full engine replacement. The engine is available for inspection upon request. There was no evidence of sludge or lack of maintenance noted during inspection. The most recent oil change had been performed less than 1,000 miles prior to the failure, indicating the issue was not caused by lack of maintenance. This condition creates a safety concern due to the potential for sudden engine failure, loss of power, or engine seizure while driving, which could increase the risk of an accident, especially at highway speeds. The issue has been confirmed by a dealership and has not been repaired due to cost.
- Engine
While driving on an interstate on March 12, 2026, the engine stopped working requiring that the car be pulled over to the side of the road. There were no indications of issues as oil had been regularly changed, and the battery and tires were replaced in fall of 2025. The check engine and oil lights…
While driving on an interstate on March 12, 2026, the engine stopped working requiring that the car be pulled over to the side of the road. There were no indications of issues as oil had been regularly changed, and the battery and tires were replaced in fall of 2025. The check engine and oil lights all flashed at the time of the incident, not before. Fortunately, we were able to pull over to the side of the highway, and a tow truck brought the car to a service center. The initial diagnosis was that the seal on the crankcase failed. The service center, and now the Hyundai dealer, do not know the cause of this catastrophic damage that may result in the need for a full engine replacement.
- Engine
The vehicle has developed a pronounced knocking noise that was diagnosed by your authorized dealership as “piston slap.” I was informed by dealership staff that this is a known issue with this vehicle. However, because the vehicle is outside of warranty by time and mileage, I was told no repair…
The vehicle has developed a pronounced knocking noise that was diagnosed by your authorized dealership as “piston slap.” I was informed by dealership staff that this is a known issue with this vehicle. However, because the vehicle is outside of warranty by time and mileage, I was told no repair assistance would be provided. My primary concern is safety. While there are currently no warning lamps illuminated, the engine is producing a consistent knocking noise. If this condition progresses to piston or engine failure while the vehicle is in operation, it could cause sudden loss of power or engine seizure. Such a failure at highway speeds or in traffic could create a serious accident risk to myself and others. Additionally, I was charged one hour of diagnostic labor, despite the dealership immediately recognizing the noise as piston slap without needing further testing. This raises concern that: The issue is well-known, The condition was identifiable without extensive diagnosis, Yet I was still billed for a full diagnostic hour. Given that this is acknowledged as a known issue, I am requesting: A formal review of this case by your product safety and quality department. Clarification on whether this condition has been the subject of technical service bulletins, extended coverage programs, or internal advisories. Consideration of goodwill repair assistance due to the potential safety implications. Reimbursement of the diagnostic charge, as no true diagnostic procedure appears to have been required. Written confirmation that continued operation of the vehicle in its current condition does not present a safety risk. I am prepared to provide service records, invoices, and any additional documentation needed. Given the potential safety implications, I respectfully request a response within 48 hours. I am hopeful the manufacturer will stand behind the safety and reliability of its product and address this matter promptly.
- Engine
A system in the Engine that allows for oil to sit and burn. UNKOWN A Mechanic shop that I go to regularly stated that this has been a known issue that has been going on for the past 12 years. Along side when I bought the car I was told that the engine is usually louder then most cars, this has…
A system in the Engine that allows for oil to sit and burn. UNKOWN A Mechanic shop that I go to regularly stated that this has been a known issue that has been going on for the past 12 years. Along side when I bought the car I was told that the engine is usually louder then most cars, this has been the general consensus. Personally with my car no, having done research outside of just my car: UNKNOWN there were no warning lamps, messages, or other symptoms of the problem. I was first told about this issue during the 2nd week of February of 2026, With the oil change paperwork of when I found out about the issue
- Electrical system · Engine · Service brakes
[XXX] is subject to Safety Recall 20V-755 Hyundai Recall 251 for a defective ABS module that may leak brake fluid, cause an electrical short, and increase the risk of an engine compartment fire. The recall remains open and has not been performed. On Feb 2, I brought the vehicle to McGovern Hyundai…
[XXX] is subject to Safety Recall 20V-755 Hyundai Recall 251 for a defective ABS module that may leak brake fluid, cause an electrical short, and increase the risk of an engine compartment fire. The recall remains open and has not been performed. On Feb 2, I brought the vehicle to McGovern Hyundai of Arlington and disclosed an active brake fluid leak consistent with Recall 251. I also stated that brakes were recently replaced 4 weeks ago. The service advisor incorrectly said the recall was just for a fuse and unrelated to brake fluid. The dealership drove the car for a state inspection despite knowing about the leak and open recall. They stated the brakes are bad and requested payment for a diagnostic, which I declined. No diagnostic testing was performed. The dealership informed me the required ABS module part was unavailable and instructed me to return Friday, waiting 3 5 business days. The recall repair was not completed, and no towing or alternate transportation was offered. The dealership invoice documents the incomplete repair. I live in East Boston, MA, a densely populated urban area with street parking. If the defect causes a fire, it could endanger nearby vehicles, residences, and public safety. I am filing this complaint to document the unprepared safety defect, dealership misinformation, and ongoing community fire risk. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags · Service brakes · Unknown or other
I have had a couple of issues that I have had others tell me or read online that they have had the same issues 1- When I bought the car, which was used at the time. Just a couple of years ago I drove it off of the lot and it had a break issue. I had to take it towed back to the dealership bc…
I have had a couple of issues that I have had others tell me or read online that they have had the same issues 1- When I bought the car, which was used at the time. Just a couple of years ago I drove it off of the lot and it had a break issue. I had to take it towed back to the dealership bc something broke underneath and the breaks were failing. So they fixed the problem supposedly. I only had a 30 day warranty and after the 30 days the breaks started grinding every time I stopped. This went on for a long time. I had an other mechanic look at it and did something and I can not recall exactly what he said but after about a week, the noise started back up and at that time I had had the car for about a yr and he said I still had about 25 percent left on my break pads. So probably about 4 months ago I changed my front breaks, including the rotors and the back breaks to, I also had to replace the front left caliber bc while trying to take the pin out of the caliber to clean it, the pin broke. So I replaced it. Took my care in to get inspected And they told me I need to do the back breaks and the back right caliber to pass inspection. So I did the work and got it done. I am not a rich person so I can only take it a mechanic if it something that I can not do myself my I have had good training bc had been a mechanic and had taught at mechanic schools so I know I have help and if I am not sure about something he will help. So now after doing all of that hard work, I am starting to hear the grinding noise again with the breaks and my breaks are good. It always starts our really light and then gets louder within a couple of weeks. 2- the second issue is that my airbag light is on, I am not sure why this is , I have never been in any kind of accident. One day just popped on and never went off 3- I have read online that you have had a recalls on newer models for Hyundai Elantra with the issue but not my year. Well my trunk latch ended up get latched and would not open
- Unknown or other
The car caught fire all the sudden while parked and burnt almost completely (~80%)
- Electrical system · Engine · Fuel/propulsion system
Vehicle Issue Description for NHTSA Complaint: Component/System Failure: The engine of my 2013 Hyundai Elantra (VIN: [insert VIN]) completely failed at 51,000 miles. The alternator also failed and had to be replaced. There was a persistent smell of gasoline inside and outside the vehicle…
Vehicle Issue Description for NHTSA Complaint: Component/System Failure: The engine of my 2013 Hyundai Elantra (VIN: [insert VIN]) completely failed at 51,000 miles. The alternator also failed and had to be replaced. There was a persistent smell of gasoline inside and outside the vehicle, creating a fire hazard. All components are available for inspection upon request. Safety Risk: The engine failure left the vehicle completely inoperable. The gas smell created a serious fire hazard and caused me to experience health issues, requiring an ER visit. The combination of engine malfunction, electrical issues, and fuel leaks posed a risk to my safety and the safety of others while driving. Confirmation by Dealer / Mechanic: Independent mechanics inspected the vehicle and confirmed the engine failure and alternator issues. Multiple mechanics advised not to drive the car due to the fire hazard. The original selling dealer (Larry H. Miller Toyota) inspected the car and acknowledged engine problems in writing on a business card. Inspection by Manufacturer / Others: Hyundai corporate has been notified, but they declined warranty coverage as the vehicle is a second-owner car and beyond the original warranty. The dealer has also been made aware of the engine failure. Warning Lamps / Symptoms: No warning lamps indicated imminent engine failure prior to the engine dying. The first symptoms were mechanical issues, gas smell, and eventual total engine failure. Alternator failure and repeated maintenance issues occurred within 8 months of purchase. Additional Notes: Vehicle purchased at 34,000 miles; engine failed at 51,000 miles. Independent repair receipts, ER paperwork, are available to support the case.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Hyundai and Kia ABS Module Fires
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by…
The Office of Defects Investigation (ODI) has received eight Hyundai Motor America (Hyundai) and eight Kia America, Inc. (Kia) Part 573 Recall Reports between 2016 and 2023. The combined 16 safety recalls all involve the antilock braking system (ABS) modules or Hydraulic Electronic Control Units (HECU) manufactured by the equipment supplier Mando. The Part 573 Recall Reports contain varying defect descriptions and differing remedy descriptions for the same or similar equipment supplied by Mando. Safety recalls included in this Audit Query (AQ) review include: Hyundai recalls 20V-520, 20V-543, 21V-161, 21V-160, 21V-303, 22V-056, 22V-810, and 23V-651. Kia recalls 16V-815, 20V-518, 20V-519, 21V-137, 21V-331, 22V-051, 22V-800, and 23V-652 The purpose of this AQ is to evaluate the timeliness and scoping of Hyundai and Kia’s defect decision making and adherence with reporting requirements; and understand the varying defect descriptions and remedies between these recalls.
- Engine Fires
On March 29, 2019, the Office of Defects Investigation (ODI) opened two Preliminary Evaluations (PE19-003 on Hyundai and PE19-004 on Kia) to broadly investigate incidents of non-crash fires (regardless of origin or operational status of the vehicle) on various model year Hyundai and Kia vehicles. During the PE…
On March 29, 2019, the Office of Defects Investigation (ODI) opened two Preliminary Evaluations (PE19-003 on Hyundai and PE19-004 on Kia) to broadly investigate incidents of non-crash fires (regardless of origin or operational status of the vehicle) on various model year Hyundai and Kia vehicles. During the PE investigations, Hyundai and Kia issued several recalls to address vehicle fires, including those due to engine failures involving various engine types. The remedies for the engine failure recalls typically involve engine inspection (to detect existing damage), and if necessary, engine replacement. Additionally, both manufacturers have been installing an engine control software modification known as Knock Sensor Detection Software (KSDS) which is intended to detect impending engine failure, alert the driver, and limit engine power (to lessen likelihood of engine failure).KSDS is being installed under recalls and non-safety field actions, and both companies have extended limited engine warranties (see recall files). On December 22, 2021, ODI upgraded PE19-003 and PE19-004 to this Engineering Analysis (EA21-003, covering both Hyundai and Kia) to evaluate the scope of the prior recalls related to engine failures/fires and the efficacy of the recall remedies for the recalls, as well as the long-term viability of related programs and non-safety field actions being conducted by Hyundai and Kia. The former issue involved approximately 550,000 MY 2013 Hyundai Elantra, MY 2011 Kia Sorento, and MY 2012-2015 Kia Rio. The latter issue involved approximately 2.5 million recalled vehicles, which have been identified as displaying potential remedy concerns: Hyundai recalls 15V-568, 17V-226, 20V-746, and 21V-727; and Kia recalls 17V-224, 19V-120, 20V-750, and 21V-844. Regarding the recall scope issue, among all of the scope vehicles identified at EA opening, ODI found only the MY 2011 Kia Sorento vehicles equipped with both the Theta II 2.4L 4-cylinder Multi-Point Injection (MPI) and the Lambda II 3.5L 6-cylinder MPI engines experienced relatively high rates of reported fires. In December 2023, Kia issued recall 23V-877 that will cover about 80,000 MY 2011 Kia Sorento vehicles equipped with the Theta II 2.4L MPI engines. The remedy will involve an inspection, and if necessary, a replacement of the engine, as well as the installation of KSDS. It should be noted that in 2021 these vehicles were included in a KSDS product improvement campaign with warranty extension. For the MY 2011 Sorento vehicles equipped with the Lambda II 3.5L engines, ODI believes that future engine failures/fires involving these vehicles will likely be due to a lax in adhering to the proper or scheduled engine maintenance (regular engine oil changes), rather than a design or manufacturing engine issue. Regarding the issue of the efficacy of the recall remedies, ODI found the majority of the recalled Hyundai and Kia vehicles, by model, experienced lower reported fire rates after the remedies were applied. Furthermore, ODI found that for most vehicles that did not receive the recall remedies, by model, experienced relatively high fire rates. To address this problem, Hyundai informed ODI in December 2023, that it will renotify all of its owners covered by the Hyundai recalls of engine failures/fires every 8 months for the next 3 years. In December 2023, Kia stated that it will renotify the majority of its owners every 8 months for the next 3 years.Several previously recalled Kia models are excluded from the renotification due to their lower reported rates of engine fires. Overall, the renotification actions will help to increase the recall completion rates, thus reduce the frequency of engine fires in the future. In view of the recall action being taken by Kia and renotification actions being taken by both Kia and Hyundai, ODI is closing this Engineering Analysis. Also, both companies have been released from the 2020-iniated Consent Orders (Kia since November 2022 and Hyundai since November 2023). The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Throttle control system vulnerabilities
The Office of Defects Investigation (ODI) of the National Highway Traffic Safety Administration (NHTSA) received a petition letter dated October 10, 2021, requesting an investigation of possible defects in the electronic throttle control (ETC) system on certain Kia vehicles resulting in the opening of DP21-003.…
The Office of Defects Investigation (ODI) of the National Highway Traffic Safety Administration (NHTSA) received a petition letter dated October 10, 2021, requesting an investigation of possible defects in the electronic throttle control (ETC) system on certain Kia vehicles resulting in the opening of DP21-003. Accordingly, Model Year (MY) 2005-2016 Kia Optima/K5, MY 2006-2015 Kia Sorento, MY 2007-2016 Hyundai Elantra, MY 2007-2016 Hyundai Santa Fe, MY 2006-2015 Hyundai Sonatas are all part of the subject population. The petition was originally filed as a Vehicle Owner Questionnaire that can be reviewed at NHTSA.gov under reference (ODI) number 11439675.On November 12, 2021, ODI opened Defect Petition DP21-003 to evaluate the petitioner?s request. ODI performed trend analyses of the VOQs related to vehicle speed control issues for all the subject vehicles and found that none of the 52 Model/Model Year Hyundai/Kia vehicles demonstrated any actionable trend that warranted an investigation.Petitioners submitted 1119 VOQs and non-VOQ cases in which sudden uncommanded acceleration (SUA) or loss of motive power (LOMP) incidents were alleged.For the 1119 reports, 220 were incidents involving crashes, from which 69 subject Hyundai-Kia vehicles were inspected by Hyundai/Kia dealer technicians, Hyundai/Kia engineers, and/or third-party representatives.ODI found the inspections identified no vehicle defects related to the ETC system.Of the 220 crash-involved reports, 13 Event Data Recorder (EDR) records were downloaded successfully and 11 of those indicated driver error: (i.e.) pedal misapplication.A condition where the accelerator pedal is mistakenly applied instead of the brake pedal when the driver wants to stop the vehicle.In addition, ODI reviewed a scientific journal paper published in Forensic Science International in 2016 by Mr. Park et al ., as well as related test videos. ODI does not believe there is any evidence of uncontrollable SUA occurrences in any of the tests reviewed. NHTSA's Office of Vehicle Safety Compliance (OVSC) reviewed the allegations regarding the potential noncompliance with Federal Motor Vehicle Safety Standard No. 124.Based on the information provided, the Agency concludes there is insufficient information for us to determine if a possible non-compliance exists.Finally, both Hyundai and Kia informed ODI that all their vehicles manufactured after 2012 were equipped with an ETC management system, in which the engine speed will go to idle when the system sees signals from both the brake pedal and accelerator pedal at the same time; this is commonly known as the brake-throttle override system.After thoroughly assessing the material submitted by the petitioner, information already in NHTSA's possession, information submitted by Hyundai and Kia in response to an Information Request letter, and the potential risks to safety implicated by the petitioner's allegation, NHTSA does not believe that a formal investigation is warranted. After full consideration of appropriate factors, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA?s reasons for denial of the petition will be published.
- Headliner Bracket Detachment
In March 2013, Hyundai issued a safety recall to reinforce the attachment of the metal support brackets to the headliner assembly in approximately 186,254 model year 2011-2013 Hyundai Elantra vehicles built in Korea and sold in the U.S. (see NHTSA recall 13V-115 for more information).The recall covers vehicles built…
In March 2013, Hyundai issued a safety recall to reinforce the attachment of the metal support brackets to the headliner assembly in approximately 186,254 model year 2011-2013 Hyundai Elantra vehicles built in Korea and sold in the U.S. (see NHTSA recall 13V-115 for more information).The recall covers vehicles built up to March 5, 2013.After that date, Hyundai began using headliners with reinforced bracket attachments in the Korea-built Elantra vehicles.ODI has opened a Recall Query (RQ13-004) to investigate model year 2009-2012 Hyundai Elantra Touring vehicles.During EA12-008, ODI found these vehicles are equipped with a support bracket design and layout similar to that in the above-mentioned Elantra vehicles.Also, the headliner manufacturing processes used were similar for both models.Like the Elantra vehicles built before the recall, the Elantra Touring model headliner does not contain reinforced bracket attachments.This Engineering Analysis is closed.See attached report for additional information.The ODI report cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification number: 10457696
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11000788A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
- 11000314A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
- 10253275This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10251282Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. Campaign 9A8 has also been released to provide a revised software update to certain 2018 model year Elantra vehicles. For certain vehicles that cannot be upgraded with the software under Campaign 993, Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealerships.
- 10251276This bulletin provides the service procedure to: 1) Upgrade the IBU/BCM (Integrated Body Control Unit/Body Control Module) to revise the OEM Hyundai burglar alarm system operation and ignition start logic and 2) Install two anti-theft decals for the front windows. Additional decals may also be installed in the rear windows at customers discretion.
- 10251275Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealers.
- 10249707Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
- 10247611Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10245579Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
- 10245578Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
- 10245009In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain 2011 2016MY Elantra (MD/UD) and certain 2013 2014MY Elantra Coupe (JK) vehicles.
- 10245008In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. The service campaign describes the procedure to perform this preventative service on certain 2011 2016MY Elantras (MD/UD) and certain 2013 2014MY Elantra Coupe (JK) vehicles.
- 10244992Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
- 10241874Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
- 10241849Some models from service campaign 993 (IBU/BCM Software Update and Decals Application) equipped with the Hyundai OEM remote start system may exhibit the horn honking when remote starting the vehicle after receiving the software update. This bulletin provides the procedure to update the remote start module to eliminate the horn honking during remote start operation.
- 10240081Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32).
- 10240080Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
- 10238383Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32).
- 10238381Hyundai Motor America is offering steering wheel locks to owners of certain 2011 2017MY vehicles that are not eligible for Service Campaign 993 anti-theft software. This bulletin describes the procedure to provide the steering wheel locks to customers on the dealership service drive.
- 10238353Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
- 10237189Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10235556Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
- 10235555Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
- 10228213In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain 2011 2016 Elantras (MD/UD).
- 10228212In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. The service campaign describes the procedure to perform this preventative service on certain 2011 2016 Elantras (MD/UD).
- 10227348In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. The service campaign describes the procedure to perform this preventative service on certain 2011 2016 Elantras (MD/UD).
- 10227332In certain areas, a vehicles underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain 2011 2016 Elantras (MD/UD).
- 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
- 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 10215609This Dealer Best Practice previously informed dealers of a proposed settlement of a class action lawsuit known as Brown v. Hyundai Motor America et al., No. 2:18-cv-11249 (D.N.J.) (the Action). Customers affected by the proposed settlement have been informed of the settlement by mailed notice and email, and they may direct questions to dealers.
- 10215605The Powertrain warranty coverage for the engine long block for damage related to a piston slap noise in the upper end of the engine as described in TSB 22-EM-007H has been extended.
- 10215604This bulletin describes the procedure to inspect an engine exhibiting noise between the cylinder block and piston due to possible scuffing on one or more cylinder walls. Follow the procedure outlined in this bulletin to inspect the engine and replace the engine long block along with service kit if scuffing is observed.
- 10196571The trunk latch base can be ordered separately from the trunk latch assembly. This bulletin describes the procedure to replace the trunk latch base.
- 10191794The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. Refer to the warranty and service parts information outlined in this bulletin whenever clock spring replacement is required.
- 10191791This bulletin describes the procedure to inspect an engine exhibiting noise between the cylinder block and piston due to possible scuffing on one or more cylinder walls. Follow the procedure outlined in this bulletin to inspect and replace the short engine assembly if scuffing is observed.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
Every Hyundai Elantra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.