1991 Mazda Mpv
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 1991 Mazda Mpv. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 1991 Mazda Mpv. Newest first.
Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
Risk and remedy
Risk
If the ignition switch overheats there would be an increased risk of a fire.
Remedy
Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
Risk and remedy
Risk
The safety belts would not provide adequate protection to an occupant in a vehicle crash.
Remedy
Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch IS securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button IS pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer IS developing a remedy designed to prevent failure of the buttons that are not currently broken.
The rear brake linings can change over time. As the brakes wear, the coefficient of friction can increase, producing inconsistent rear brake performance and premature activation of the ABS system.
Risk and remedy
Risk
Inconsistent braking and premature activation of the abssystem can cause sudden stops or increased braking distances, and result inincreased risk of vehicle accident.
Remedy
Replace the rear brake assemblies with assemblies whose friction characteristics do not change. This will reduce the risk of premature ABS system activation.
Owner complaints
66 complaints6 involved a crash1 involved a fire6 injuries
What owners report most
Latest complaints
- Service brakes, hydraulic · Steering
The front wheel skidded and the front brake locked up while driving on light snow covered highway. It caused the steering wheel to become immobilized. The driver was unable to maneuver the car and it overturned. *Tr
- Unknown or other
Paint IS chipping and fading all over the van especially on the back and the roof. I saw lots of models on the road with the same paint problem. *jb
- Fuel system, gasoline · Seat belts
The seat belts on my 1991 mazda mpv are simply falling apart. The fuel vapor separator does an inadequate job of keeping gasoline fumes out of the vehicle. There have been recalls on both of these items. When I took it in to the local dealer they only performed an inspection. Both issues remain unresolved. Besides not ever buying another mazda ever. I would like to see these safety issues resolved. *nm
- Power train · Unknown or other
Paint started to chip away. Transmission was replaced for the second time.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
While driving, consumer had to stop suddenly and applied brake pedal abruptly. the anti-lock brake system failed and consumer collided with another vehicle. the brakes locked up. Ts
- Equipment › Electrical › Radio/tape deck/cd etc.
Consumer states the right rear audio speaker caught fire while driving.*jb
- Fuel system, gasoline › Storage › Tank assembly
At the time I had this component failure, I did not know what the problem was. I took this vehicle to an authorized mazda dealer who proceeded to take a full 10 minutes to look at this vehicle and tell me there was not a problem with it. I previously filed a complaint and to my knowledge did not…
At the time I had this component failure, I did not know what the problem was. I took this vehicle to an authorized mazda dealer who proceeded to take a full 10 minutes to look at this vehicle and tell me there was not a problem with it. I previously filed a complaint and to my knowledge did not receive any feedback. during the time I had this failed component on my fuel system, I developed a chronic asthma condition. another dealer finally found a crack in the fuel vapor separator one year later when I took this vehicle back for another inspection. it took 4 months after the second mazda dealer found the crack for me to obtain a replacement part for the failed component. the dealer never informed me it was unsafe to continue driving this car reeking of fuel odors. I would like an investigation to be conducted on a formal level. I believe mazda failed to inform their customers of dangers associated with driving a car that may have fuel vapors leaking into the passenger compartment of the vehicle. I believe the authoirzed dealer failed to warn of the potential dangers of fuel odors in the passenger compartment of the vehicle. it seems by reading the recall letters issued in april 1998 and jan 1999 that the first letter reflected an attitude of nonchalance, and mazda implied that there was really no cause for concern, or true belief that this recall should be taken seriously. though I did take it seriously and had my car inspected for the failed component, the authorized mazda dealer did not seem concerned that i, a consumer in good faith, was placed in harms way. along with my children. please respond to my request and advise if I need to channel or redirect my efforts to have this investigation request somewhere else. sincerely, [xxx]. *Ak parts of this document have been redacted to protect personally identifiable information pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6).
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
While traveling and when depressing brakes there was extended stopping distance which caused vehicle to run into another vehicle. *ak the consumer was traveling 45 mph at the time the brake failed. *yh
- Engine and engine cooling › Engine › Gasoline
Consumer has been experiencing an ongoing problem with an oil leak that IS causing smoke and a horrible smell, vehicle has been taken to a dealer 5 times and the problem has not been remedied, valve cover gaskets were replaced several times, rear cap seals replaced, and o rings were replaced. *slc
- Tires › Tread/belt
Firestone fr 680 asrws tire (P205 70 R14) experienced tread separation on both front tires, consumer IS requesting all 4 tire be replaced. *slc
- Power train › Automatic transmission
Automatic transmission, which had a transmission cooler, failed prematurely at 64,000 miles.*ak
- Engine and engine cooling › Engine › Gasoline
Repair shop notified me that this problem was known to mazda and IS in a tsb regarding rocker arms which were modified . How can mazda be allowed to sell a known defect to consumers. IS there any repair compensation allowed to owners? Thank you.
- Electrical system › Ignition
Key switch getting hot and you can smell wires burning
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
While driving stepped on brake pedal, and it went all the way to the floor. vehicle has rear anti-lock braking system, but the system will lock up. This has happened each time brakes were pressed hard. left reasr wheel locks up, and application of brakes cause sideways skid. problem reoccurred after many brake replacements. recall was received for this problem. *Ak *ML
- Engine and engine cooling › Engine
The engine head gasket blew, causing water / coolant leakage, causing engine to overheat. Vehicle was inspected by dealer and independent shops. *ak *yc
- Unknown or other
Van has paint primer failure, and the paint just flakes off. I realize this IS not a safety issue, but thought I would report it anyway. I have had my van to two car painting companies who have confirmed for me that the paint coming off IS due to primer failure. I have written the manufacturer…
Van has paint primer failure, and the paint just flakes off. I realize this IS not a safety issue, but thought I would report it anyway. I have had my van to two car painting companies who have confirmed for me that the paint coming off IS due to primer failure. I have written the manufacturer, and they have advised me that the car IS out of warranty of which I am well aware, however, the hood has a large area where the paint has come off, and the hatch has a large strip where the paint has come off, and it IS coming off in smaller spots all over the van. I am left with the option of paying for the paint myself which IS approx. $2,000 since the entire van has to be stripped, or selling or trading it in at a loss due to the current paint condition. I know my van, which IS white, IS not the only one with this paint condition as I have seen several others around town whose paint condition IS the same as mine, coming off in the same places as mine. I may have wasted my time filling out this report, but feel I have nothing to lose at this point. thank you for your time. No safety defect listed. *Ak
- Engine and engine cooling › Engine › Gasoline
While driving on freeway 40mph heard a snap, vehicle stopped running.contacted dealer. *ak
- Latches/locks/linkages › Doors › Latch
Parked vehicle. Was getting out when the locks failed to release. Had to force lock up to release. Relocked door once outside. Then tried to unlock door after returning & lock would not release. Took to dealer & informed locking mechanism inside door was broken & need to be fixed. *ak
- Engine and engine cooling › Engine › Gasoline
Experienced problems with engine noise (ticking lifters & piston slap) at 40K; dealer replaced short block engine, but problem was back by 60K. in spite of changing the oil every 2K, using a synthetic (mobil 1 and other friction reducers - slick 50, prolong) my problem persisted. if I allowed the…
Experienced problems with engine noise (ticking lifters & piston slap) at 40K; dealer replaced short block engine, but problem was back by 60K. in spite of changing the oil every 2K, using a synthetic (mobil 1 and other friction reducers - slick 50, prolong) my problem persisted. if I allowed the oil to stay in w/o changing for more than 2K I would get this loud, terrible ticking noise when I started in the morning and even while at highway speeds you could hear this ticking over the highway noise. I have lived with this problem during the life of this engine feeling powerless to do anything about it. even though I was able to get good service from my engine, I have no doubt that it could have performed even longer if this problem didn't exist.
- Engine and engine cooling › Engine › Gasoline
Cracked engine cylinder head.
- Engine and engine cooling › Cooling system › Radiator assembly · Engine and engine cooling › Engine · Unknown or other
Engine check light came on. temperature read hot. attempted to pull the car over and all indicator lights were on. the car died. car towed to dealer, would not start. dealer discovered a hole in radiator and blown head gaskets. Internal damage and consumer has no car. *ak
- Engine and engine cooling › Engine · Suspension › Front › Shock absorber
Valve train in the engine failed, causing noise.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
Anti lock brakes failed.
- Engine and engine cooling › Engine
Engine lifters went bad two years ago , so the dealer has replaced the lifters . Owner took vehicle into dealer for inspection and was informed that the lifters needed to be replaced. *ak
- Power train › Manual transmission
The transmission failed, causing the engine to stall.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Fuel liquid-vapor separator
Evaporative emissions control system liquid-vapor separator may fail at nipple for fuel tank hose connection resulting in fuel leakage in the area behind the right rear trim panel.
- Fuel liquid-vapor separator failure
Rators areevaporative emissions control system liquid-vapor separators are allegedly failing and leaking fuel liquid/vapor.
- Takata seat belt buckle failure
There is no summary currently available
- Inconsist.brk performance
There is no summary currently available
- Inconsistent brake perform
===
- Throttle sticking
There is no summary currently available
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10213425Speedometer replacement procedure
- 10153339In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10148072In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10144333In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10118467In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10098367In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:mazda vehicles are manufactured with tamper-proof speedometers.when a speedometer IS replaced, the new speedometer will read zero (0) miles.this procedure IS extremely important to accurately represent actual vehicle mileage.prior to speedometer removal, complete the information required on the speedometer replace-ment label. Labels can only be ordered through mstore, not mdcs.
- 10009427Battery test procedure requirements.
- 10009424Speedometer replacement procedure.
- 621310Some vehicles may exhibit a no start, rough idle and / or lack of power after a 60,000 mile timing belt replacement interval.
- 609949Subject regarding 60,000 mile service, inspection and / or replacement of the tensioner pulley.
- 603906Some vehicles may experience hla noise.
- 603891Conditions with steering wheel slightly off center.
- 603854Information regarding seat belt extenders.
- 600148Concerns with hla noise heard after a cold start.
- 52520Parts replacement after airbag deployment.
- 52503Maintenance free battery - diagnostic and charging procedure.
- 52497Use of a/c tracer dye.
- 52492Wiper motor inoperative - circuit breaker activation.
- 52487Replacement connectors for ecat solenoid harness.
- 52481Fuel odor - gasoline smell may be entering the passenger compartment.
- 52469Power steering fluid hose comes off.
- 46704Cylinder head gasket modification.
- 40067The rear defroster switch harness has been modified.
- 39688Hard shift, r-type transmission.
Every Mazda Mpv model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.