2006 Mazda Mpv
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 Mazda Mpv. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2006 Mazda Mpv. Newest first.
Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354.
Mazda North America Operations (Mazda) is recalling certain 2005-2006 Mazda MPV vehicles sold, or ever registered, in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. On…
Risk and remedy
Risk
An inflator explosion may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018 for MPV vehicles. The recall began July 9, 2019 for RX-8 vehicles. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 17V-011.
Owner complaints
12 complaints2 involved a crash2 injuries
What owners report most
Latest complaints
- Air bags
TL* takata recall. The contact owns a 2006 mazda mpv. The contact received notification of nhtsa campaign number: 18v404000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Tulley…
TL* takata recall. The contact owns a 2006 mazda mpv. The contact received notification of nhtsa campaign number: 18v404000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Tulley mazda (147 daniel webster hwy, nashua, nh) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Parts distribution disconnect.
- Electronic stability control (esc) · Engine
My vehicle has les than 84,000 miles on it and all of a sudden the check engine light came on while I was driving and a technician later told me that there IS a problem in the spark plug system. I also had a windshield wiper pop off while in use going down the highway.
- Engine
TL* the contact owns a 2006 mazda mpv. While driving various speeds, idling, or driving uphill, the contact heard a knocking noise coming from engine cylinder number six. The failure recurred numerous times. The vehicle was not taken to the dealer. The vehicle was not diagnosed or repaired. The…
TL* the contact owns a 2006 mazda mpv. While driving various speeds, idling, or driving uphill, the contact heard a knocking noise coming from engine cylinder number six. The failure recurred numerous times. The vehicle was not taken to the dealer. The vehicle was not diagnosed or repaired. The contact called the sierra mazda dealer in birmingham, al. The contact was informed that there was no open recall on the vehicle. The contact notified the manufacturer. The approximate failure mileage was 200,000.
- Air bags
TL* takata recall. The contact owns a 2006 mazda mpv. The contact received notification of nhtsa campaign number: 16v354000 (air bags); however, the part for the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The manufacturer was made aware of the issue. Parts distribution disconnect.
- Exterior lighting
The headlight housings have hazed over. this condition has severly limited the light output of the headlights. the vehicle IS well maintained and the manufacturer contends that this IS normal wear on the headlight. *js I find it hard to believe that they intended the light output to diminish over time to the point where the headlight housings restrict light output below minimum lumen.output
- Structure › Body · Vehicle speed control
I own a 2006 mazda mpv. On september 26, my wife had an accident while entering in our home drive way, with the brake pedal depressed, the vehicle continued to accelerate and struck the garage door and crashed against the internal wall that divide the garage from the kitchen. we did not…
I own a 2006 mazda mpv. On september 26, my wife had an accident while entering in our home drive way, with the brake pedal depressed, the vehicle continued to accelerate and struck the garage door and crashed against the internal wall that divide the garage from the kitchen. we did not reported the accident to the police or the insurance to avoid further increase in the quotes insurance but our neighbors saw the accident. we had to hire a specialized door company to replace the garage door and a handyman to fix the garage side and the kitchen side. The estimated cost for the car repair IS $2,000.00, new garage door $1,175.00 and the wall $250. a few days after we both this car, I had the same problem at the auto parts parking lot without consequences, just the terrible moment in what you feel that you can't stop your car. We founded at least 15 complaints in the internet related to this type of problem with the mazda mpv. All these complains are available upon request. *tr
- Electrical system · Visibility › Power window devices and controls
The electric window control for the 2006 mazda mpv failed to lower the drivers side window when engaged. When the other window controls were engaged, the control panel on the drivers side door began to make a whining noise and smoke. We reported it to the mazda dealer who told us that they have…
The electric window control for the 2006 mazda mpv failed to lower the drivers side window when engaged. When the other window controls were engaged, the control panel on the drivers side door began to make a whining noise and smoke. We reported it to the mazda dealer who told us that they have seen this problem quite a bit, but it IS not on any recall and would cost almost $1,000 to fix. We took the fuse out that controlled the windows and have not had it fixed yet. *Tr
- Fuel/propulsion system
The dealer replaced the filler tube for filling up the gas tank. Every time I pump gas into the vehicle I get back splash that goes all over myself and the ground. I've been trying to get them to fix the problem, but the dealer and the manufacturer don't want to fix the problem. The vehicle was…
The dealer replaced the filler tube for filling up the gas tank. Every time I pump gas into the vehicle I get back splash that goes all over myself and the ground. I've been trying to get them to fix the problem, but the dealer and the manufacturer don't want to fix the problem. The vehicle was still under warranty when the problem started. they have replaced the filler tube twice and the gas tank, but the problem still exists. This back splash IS dangerous to my health and the environment. I bought this vehicle brand new. The problem wasn't there when I bought the van. *tr
- Fuel system, gasoline
Tl*the contact owns a 2006 mazda mpv. The contact stated whenever fuel was added to the vehicle it spilled back out. The dealer replaced the filler tube twice and the fuel tank one time since the vehicle was repaired and the failure continued to occur. The fuel continued to spill out on the…
Tl*the contact owns a 2006 mazda mpv. The contact stated whenever fuel was added to the vehicle it spilled back out. The dealer replaced the filler tube twice and the fuel tank one time since the vehicle was repaired and the failure continued to occur. The fuel continued to spill out on the contact. The manufacturer wrote a letter and a customer service representative should have notified him. The failure mileage was 38,944.
- Service brakes, hydraulic · Vehicle speed control › Cruise control
Tl*the contact owns a 2006 mazda mpv. while pulling into a handicapped space with the brake pedal depressed, the vehicle continued to accelerate and struck the handicapped sign. the vehicle proceeded and crashed into the window of a bank. the contact received injuries to his chest and stomach.…
Tl*the contact owns a 2006 mazda mpv. while pulling into a handicapped space with the brake pedal depressed, the vehicle continued to accelerate and struck the handicapped sign. the vehicle proceeded and crashed into the window of a bank. the contact received injuries to his chest and stomach. the vehicle will be towed to the mazda dealer for inspection. the contact previously informed the dealer that his vehicle was surging and the cruise control was accelerating faster than the set speed. florida highway police filed report number 070ff132518, and h.s.m.c. Filed crash report number 7738-3529. the speed and powertrain were unknown. the current mileage was 8,666 and failure mileage was 8,500.
- Tires
Premature wear - oem dunlop tires worn out at under 14,000 small puncture could not be sealed buy mazda dealer - after taking the mpv to the local goodyear shop - the indicated the tires were too worn to repair . I have all the maintenance records and the tires were rotated at mazda dealer. *tr
- Power train › Automatic transmission
At low speed, 20 to 40 mph, the transmission jerks so much that the headrest hits my head badly. it IS almost like the vehicle IS rear-ended by another vehicle. my head IS still dizzy after a day. this jerking frequency IS about twice in the past 4 weeks.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10232299Speedometer replacement procedure
- 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10213429Paint damage Mazda pocket paint guide
- 10213425Speedometer replacement procedure
- 10213387Shock absorber replacement guidelines
- 10213333Battery test procedure requirements using the GR81291
- 10213332Battery Maintenance
- 10213331Sulfur smell from exhaust system.
- 10213330PreMixed long life "FL22" Engine Coolant
- 10213326Mazda guidelines for factory scheduled maintenance
- 10213185Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10209778The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10209761Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
- 10208556Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10206002Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE). The most common cause of repeat A/T failures is lack of lubrication to the front and rear planetary gears. This is usually caused by an accumulation of metal particles and debris (from a previous A/T failure) on the internal mesh type baffle of the oil cooler. Power flushing will remove the restriction by back flushing, followed by forward flushing to dislodge a restriction, then back flushing again. This will in turn ensure full ATF flow for the transmission when it is operating.
- 10205994Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10200933This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10200527This service bulletin provides information regarding the proper use of the drivers floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.
- 10198689Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories. The links provided below can be used for quick access: For 2016 models and newer: NOTE: Instructions are found under the "Attachments" section once a part is selected. Accessories E-catalog For models prior to 2016: Accessory Parts and Installation Instructions
- 10194661Subject: ** UPDATE** - Takata Inflator Special Service Program (Extended Warranty) Special Service Program SSPB3: In December 2017 Special Service Program SSPB3 - Takata Inflator Extended Warranty was announced. The extended warranty was a result of the Takata airbag inflator class action settlement. Mazda will provide supplemental warranty coverage for all repairs and replacements (including parts and labor) to correct any defects in the materials or workmanship of Takata airbag inflators and the replacement inflators installed pursuant to the Takata airbag recalls. The program covers defects in the Inflator only and does not cover other items in the airbag system. Additionally, the program also does not cover airbags that have properly deployed as a result of a collision.
- 10188016This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10188015The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10186703In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- 10186701A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. Mazda Air Cooling Coil Coating is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
- 10186693Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10179228New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010.
- 10177847When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
- 10173097Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10170817When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).
- 10170661In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10170656Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10169539A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. Mazda Air Cooling Coil Coating is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years. NOTE: See parts information for Mazda Air Cooling Coil Coating and Kit part numbers.
- 10163367A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. "Mazda Air Cooling Coil Coating" is available to encapsulate the mold to reduce odors. If the product is properly applied, it can effectively reduce the musty/mildew odor for up to three years.
- 10159201MAZDA IDS INOPERATIVE WITH VCM-II LICENSE EXPIRATION MESSAGE - If you encounter an IDS inoperative problem with VCM-II license expiration message, follow the instructions below: 1. CLICK HERE to download the resetting tool to your PC desktop. 2. Reboot your PC, DO NOT start any application after restarting. 3. Run the resetting tool by double clicking the "Reset.bat" file (on your desktop from step 1). 4. Press any key after reading the notifications about the resetting tool.
Every Mazda Mpv model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.