1996 Mazda Mpv
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 1996 Mazda Mpv. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 1996 Mazda Mpv. Newest first.
Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
Risk and remedy
Risk
If the ignition switch overheats there would be an increased risk of a fire.
Remedy
Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Owner complaints
18 complaints2 involved a crash4 injuries
What owners report most
Latest complaints
- Tires
On june 29,2005 my 5 month old son and I were traveling in our 96' mazda mpv north on 291 highway (i was meeting my husband) when my car began to shake. We were traveling approx. 65 mph. as I was getting ready to get over the van jerked hard to the right causing us to veer through both lanes of…
On june 29,2005 my 5 month old son and I were traveling in our 96' mazda mpv north on 291 highway (i was meeting my husband) when my car began to shake. We were traveling approx. 65 mph. as I was getting ready to get over the van jerked hard to the right causing us to veer through both lanes of traffic. I figured my tire had blown and pulled over immediately. it was a hot day approx. 96 degrees outside and due to where we had to pull over I had to get my 5 month out of the car because we were near an entrance ramp and oncoming cars were cutting it close to the van and I didn't want to risk the van getting hit with my son inside. my brother lenny had just called on my cell phone moments before the incident so he could come help us. he wasn't able to arrive for 35-45 minutes. the car it had damage to the passenger side back panel - scratches, dents, tearing in the panel itself, the wheel well cover was completely missing, and the mud gard in the wheel well had been torn and mangeled. it was odd that the tire hadn't blown - it was still aired up but all of the tread was off!!! The tread coming off hit the side of my van and did a lot of damage! when my brother arrived he saw the situation and told me to pull through the median to avoid being hit by oncoming traffic and at that time my baby was looking a bit sweatyand hot. I pulled my car through the median and about 1/4 mile down the raod the a parking lot where my brother changed my tire and my husband (had been contacted through my sister-in-law calling the mcdonalds ) showed up to help too. my brother changed my tire and also found tread jammed between my shocks and the tire. unfortuneatly I have found that the company cooper co that makes these tires have had a lot of injuries and crashes (even deaths) with their tires and I happen to have 3 more on my van! they were cooper tires futura 2000 lte p215/65r15 touring tires. they have good tread left on them but I am going to get them all changed.
- Engine and engine cooling › Cooling system › Radiator assembly
Owner of 1996 mazda mpv, while traveling to ammusement park requiring long lines for parking vehicle got hot. When motor was turned off radiator pressure increased, this pressure while being released safely to the overflow bottle through the connecting hose the overflow bottle was unable to release…
Owner of 1996 mazda mpv, while traveling to ammusement park requiring long lines for parking vehicle got hot. When motor was turned off radiator pressure increased, this pressure while being released safely to the overflow bottle through the connecting hose the overflow bottle was unable to release an equal amount of pressure. This resulted in the overflow bottle top exploding and spraying scalding fluid in the face of a 13 year old boy who was standing next to the open hooded compartment. He suffered 1ST & 2ND degree burns to on more than 50% of his face and some on his torso. this IS the orginal factory overflow bottle, by closer inspection it appears that the input tube and output vent are different in size, the output port IS smaller. This provides for the pressure in the overflow bottle to increase and exceed the snap-on-cap's holding strength. has this been a problem in the past?*ak
- Power train › Automatic transmission › Lever and linkage › Column shift
While traveling 40mph in 4 wheel drive unit locked up. dirver and 5 passengers were present. Vehicle started to skid and came to a stop. driver attempted several times to unlock unit, and succeeded in putting vehicle back into 2 wheel drive. No accident or injuries occurred. *ak
- Suspension › Front
Incident occurred on the evening of sat. October 14TH, 2000 wherein my girlfriend (who IS 9 months pregnant) and myself were traveling northbound on I-93 in boston, ma. I heard a loud crash-type sound and my vehicle began to swerve uncontrollably to the right. my vehicle then produced a loud thud…
Incident occurred on the evening of sat. October 14TH, 2000 wherein my girlfriend (who IS 9 months pregnant) and myself were traveling northbound on I-93 in boston, ma. I heard a loud crash-type sound and my vehicle began to swerve uncontrollably to the right. my vehicle then produced a loud thud and the right front passenger side of the vehicle dropped dramatically. I proceeded to the nearest safe location which was just off the highway at the south bay shopping plaza (in front of the kmart store). in the parking lot I noticed that my rim was completely damaged and my tire was not on the vehicle. I changed my tire with a spare and proceeded to drive when I noticed that my axle and alignment was also severely damaged. I returned to the highway and located my blown out tired and saw that the tire was shredded severely too (the location on the highway was clean and paved). on tuesday morning I then proceeded to the firestone dealership in boston where I was refused service by the manager...stating that the tire was not on their recall list. I then contacted consumer affairs of firestone and was given the run-a-round for approximately 3 1/2 hours. As of today tuesday, october 17TH, 2000, I am still without a vehicle which IS a priority as my girlfriend IS ready to deliver our child any day now. I am also in risk of my family's and my life and livilhood by not having a safe vehicle to drive. I would appreciate immediate attendance to my vehicle as soon as possible.*ak (dot number: HYM3 tiresize: p215/70r15)
- Engine and engine cooling › Exhaust system
Rust caused complete replacement of exhaust sytem after 22,400 miles (3 years). both dealership where purchased and cole muffler (specialist) state that muffler and exhaust pipes should not rust or deteriorate in this time frame. after muffler separated from exhaust pipe, it remained attached to…
Rust caused complete replacement of exhaust sytem after 22,400 miles (3 years). both dealership where purchased and cole muffler (specialist) state that muffler and exhaust pipes should not rust or deteriorate in this time frame. after muffler separated from exhaust pipe, it remained attached to undercarriage of mpv minivan, and created a hazard by contacting the tire and brakle cables while the car was being operated.
- Air bags › Frontal
No deployment of neither passenger nor driver's airbag resulted in ijury when vehicle collided with another. nlm
- Air bags › Frontal · Vehicle speed control
Vehicle experienced sudden acceleration causing collision inside garage, no deployment of air bag during front end collision. Mjs
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
Owner has ABS brakes. while trying to depress the ABS brake pedal, vehicle would not stop. Also ABS brakes light would come on at times for no reason. There were numerous brake sensors replaced which did not correct problem. *ak
- Suspension › Front › Macpherson strut
Left front strut IS weak causing damage to tire.
- Power train › Driveline › Driveshaft · Vehicle speed control › Accelerator pedal
At low speeds drivetrain binds up. Makes popping noises. Vibrations occurs in accelerator. Dealer found no problem with drive train.*ak
- Equipment › Appliance › Air conditioner · Unknown or other
Consumer got his forefinger caught in the lock spring of the ash tray.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
When brakes are applied on wet pavements the vehicle skids to the left. the dealer has been notified. *ak
- Vehicle speed control › Cruise control
Rough idle.
- Equipment › Appliance › Air conditioner
Air conditioner failed.
- Visibility › Power window devices and controls
When going 48 mph or more and rolling down the electric rear windows, the way the air comes in, it causes the vehicle to shake violently, and the air pressure causes severe damage to ears. *ak
- Tires
Owner was driving down the highway at 65mph and the tire burst. Owner also said that the tire size in the manual doesn't match tire co. Size. *ak
- Visibility › Windshield
Problem with driver's window.
- Air bags › Frontal
Vehicle involved in a frontal collision, impact 12:00 position speed 40mph, driver's side airbag did not deploy. *ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10213425Speedometer replacement procedure
- 10170661In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10153339In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10148072In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10144333In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10118467In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10098367In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:mazda vehicles are manufactured with tamper-proof speedometers.when a speedometer IS replaced, the new speedometer will read zero (0) miles.this procedure IS extremely important to accurately represent actual vehicle mileage.prior to speedometer removal, complete the information required on the speedometer replace-ment label. Labels can only be ordered through mstore, not mdcs.
- 10021000Non genuine accessories affect air bag operation.
- 10009427Battery test procedure requirements.
- 10009424Speedometer replacement procedure.
- 621310Some vehicles may exhibit a no start, rough idle and / or lack of power after a 60,000 mile timing belt replacement interval.
- 609949Subject regarding 60,000 mile service, inspection and / or replacement of the tensioner pulley.
- 608126Subject regarding paint damage - iron particles / industrial fallout / acid rain.
- 603914Subject on water leaks from sliding sunroof.
- 603906Some vehicles may experience hla noise.
- 603891Conditions with steering wheel slightly off center.
- 603875Subject pertaining to tach needle which IS stuck on wrong side of stopper pin.
- 603854Information regarding seat belt extenders.
- 600334Complaints of tach needle stuck on wrong side of stopper pin.
- 600148Concerns with hla noise heard after a cold start.
- 52520Parts replacement after airbag deployment.
- 52509Tach needle stuck on wrong side of stopper pin.
- 52508Keyless entry transmitter inoperative.
- 52505Slippage in forward and reverse due to low atf level.
- 52503Maintenance free battery - diagnostic and charging procedure.
- 52499Sports appearance package service installation instructions.
- 52497Use of a/c tracer dye.
- 52492Wiper motor inoperative - circuit breaker activation.
- 52487Replacement connectors for ecat solenoid harness.
- 46704Cylinder head gasket modification.
Every Mazda Mpv model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.