2022 Mercedes-Benz Sprinter 2500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › Sprinter 2500 › 2022
These records cover every 2022 Mercedes-Benz Sprinter 2500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2022 Mercedes-Benz Sprinter 2500. Newest first.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2022 Mercedes-Benz Sprinter vehicles. The instrument cluster illumination may not be adjustable and appear too bright in certain lighting conditions. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Controls and Displays."
Risk and remedy
Risk
A display that is too bright can make it difficult for the driver to see critical safety information, increasing the risk of a crash.
Remedy
Dealers will update the instrument cluster software, free of charge. Owner notification letters were mailed January 31, 2025. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3BELKOM.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2023 Mercedes-Benz Sprinter and 2019-2021 Freightliner Sprinter vehicles. The partition wall may be missing bolts, allowing the wall to detach during a crash.
Risk and remedy
Risk
A detached partition wall can increase the risk of injury.
Remedy
Dealers will inspect and secure the partition wall as necessary, free of charge. Owner notification letters are expected to be mailed February 16, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3TREWAN.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2021-2023 Mercedes-Benz Sprinter and 2021 Freightliner Sprinter vehicles. The topcoat paint formula may cause the windows and interior lashing rails to be insufficiently bonded to the vehicle.
Risk and remedy
Risk
An insufficiently bonded window can detach during a crash, and objects secured to an insufficiently bonded interior lashing rail can detach, increasing the risk of injury.
Remedy
Dealers will inspect the paint adhesion and repair it as necessary, free of charge. Depending on the extent of any damage, DVUSA may offer to repurchase the vehicle. Interim notification letters, notifying owners of the safety risk, were mailed February 5, 2024. Owner notification letters were mailed November 4, 2024. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3LACKHA.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2021 Freightliner Sprinter and 2021-2023 Mercedes-Benz Sprinter and Metris vehicles. The fuel pump may shutdown, which can result in a loss of drive power.
Risk and remedy
Risk
A loss of drive power can increase the risk of a crash.
Remedy
Dealers will replace the fuel pump, free of charge. Owner notification letters were mailed November 1, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is 4790205.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2022 Mercedes-Benz Sprinter and 2019-2021 Freightliner Sprinter vehicles. The instrument cluster may fail to display any information when the vehicle is started.
Risk and remedy
Risk
A blank instrument panel will not show critical information, such as vehicle speed, fuel gauge, warning messages, and warning lights, increasing the risk of a crash.
Remedy
Dealers will update the instrument cluster software on the affected vehicles, free of charge. Owner notification letters were mailed May 5, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is VS3KOMBAUS.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2022 Mercedes-Benz Sprinter vehicles equipped with electrically adjustable front swivel-seats. The wiring harnesses for the swivel-seats may have been incorrectly installed and may become damaged, which can cause the front side air bags not to deploy as intended.
Risk and remedy
Risk
An air bag that does not deploy as intended increases the risk of injury in a crash.
Remedy
Dealers will inspect and reattach the wiring harnesses, as necessary, free of charge. Owner notification letters were mailed March 17, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's number for this recall is 5491810.
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2022 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles equipped with a manual parking brake and 7-speed automatic transmission. The guide bushing on the parking pawl may fatigue, which can cause the parking pawl not to engage and result in vehicle rollaway.
Risk and remedy
Risk
Vehicle rollaway increases the risk of a crash.
Remedy
Dealers will update the software of the electronic stability, transmission control, direct select module, and electronic ignition switch control units, free of charge. Owner notification letters were mailed February 10, 2023. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA's numbers for this recall are 22V2790611, 22V2790612, and 22V2790613.
Owner complaints
40 complaints2 involved a crash2 injuries
What owners report most
Latest complaints
- Unknown or other
The vehicle was involved in a collision on January 26, 2023. I am not claiming that the computer malfunction caused that collision. After the collision, while I continued operating the vehicle, problems developed with the vehicle’s computer, electronic control system, and instrument cluster. The…
The vehicle was involved in a collision on January 26, 2023. I am not claiming that the computer malfunction caused that collision. After the collision, while I continued operating the vehicle, problems developed with the vehicle’s computer, electronic control system, and instrument cluster. The instrument display could become dark or unavailable, and a CHECK ENGINE warning was present. This prevented reliable access to important information such as vehicle speed, warnings, and operating status. I brought the vehicle to a repair facility expecting a complete inspection and repair. An insurance inspector was expected to inspect and document the vehicle before repairs, but the inspector did not arrive after I waited for the entire day. I was told that the inspector would not be available the following days and would come only when available. Relying on the instructions I received, I left the vehicle at the repair facility. I authorized a complete repair, not an incomplete or partial repair. Nevertheless, the vehicle was only partially repaired, and the computer and instrument-cluster condition remained unresolved. A Mercedes-Benz dealer later documented a CHECK ENGINE condition and that the instrument cluster was showing dark, identified an instrument-cluster malfunction, and recommended further repair or replacement. I objected to taking back and operating a vehicle with an unresolved computer and instrument-display malfunction. I was concerned that losing access to speed, warning messages, or other critical information while driving could endanger me, my passengers, and other road users. I requested that the safety-related problem be fully diagnosed and repaired, but the vehicle was presented for return with the condition unresolved. The vehicle and its repair and diagnostic records should be obtained and examined to determine the cause of the electronic and instrument-cluster malfunction. The computer malfunction began approximately February 9-10, 2023.
- Air bags · Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
Front crash with no airbag deployment and no emergency braking. Currently at The Metal Shop in Warm Springs Va. Told by insurance it is totaled. Sustained mild concussion from head trauma. Head hit steering wheel. I notice many Sprinters for sale for parts after similar front end collisions. No warning lights.
- Electrical system
Frequently, when I started the car, the instrument cluster's monochrome display will stay blank/black or display completely corrupted garbage - unreadable bit and pieces. I wasn't able to read essential info like level of drive gear and fuel level etc. Often when this happens, the physical…
Frequently, when I started the car, the instrument cluster's monochrome display will stay blank/black or display completely corrupted garbage - unreadable bit and pieces. I wasn't able to read essential info like level of drive gear and fuel level etc. Often when this happens, the physical speedometer pointers won't settle on accurate current speed level, but keep cycling: from 0 spin to some value and then reset back to 0 and spin to some value ... This makes driving risky as I am not able to see accurate driving speed!
- Electrical system · Electrical system › Alternator/generator/regulator
Almost immediately after I got my Van the Aux Balmar Alternator installed by THOR had to be replaced and was not functional. I tried to get it repaired by two warranty repair centers in Colorado and neither one could repair the Alternator or get it to charge the lithium battery that was also new.…
Almost immediately after I got my Van the Aux Balmar Alternator installed by THOR had to be replaced and was not functional. I tried to get it repaired by two warranty repair centers in Colorado and neither one could repair the Alternator or get it to charge the lithium battery that was also new. Thor told me that they would have specialist look at it when I brought it into Blue Compass of Wheatridge and they told me they had fixed the issue but it still will not charge battery even after 17 hours of driving.
- Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
Active distance assist inoperable, active brake assist functions limited, adaptive cruise control not working, lane keeping assist glitching. I was driving the vehicle home after purchase and the lane keeping assist was glitching, it was actively pulling the wheel to the left, like I was over the…
Active distance assist inoperable, active brake assist functions limited, adaptive cruise control not working, lane keeping assist glitching. I was driving the vehicle home after purchase and the lane keeping assist was glitching, it was actively pulling the wheel to the left, like I was over the fog line (I wasn’t) and it was hard braking, Making driving very unsafe. I slowed down and got off at the next exit at a gas station to figure out what was happening. I put the vehicle in park and consulted the manual. I tried to turn off and back on all the systems, through the menu, noting worked. I shut the vehicle off and cleaned the areas around the sensors and the windshield, like the manual suggests. I went in to start the vehicle, and the message “service required do not shift gears” came on the dash. It was stuck in Park. I tried to get a tow truck, but had to wait 4 days, in a gas station parking lot before a tow company with a big enough truck, and skids, (because it was stuck in park) could come on Wednesday May 27. I got it towed to a repair shop. It shows the Code P179A77 direct select redundancy malfunction, they couldn’t fix it. It needs Xentry level diagnostics. The intelligent Servo Module, or direct select module failed/won’t shift from park. There is a recall that wasn’t fixed, I got a carfax from the dealer saying that there were NO active recalls. The recall is to update an all service modules. Yes it’s available for inspection, but it’s stuck in Park at the repair shop that can’t fix it in Riverton Wyoming. I called Mercedes Benz, and tried to get help because the active recall should fix these problems. They would not help. They will not sell me the part and code it to the vehicle because it’s part of their theft deterrent system. This has cost me thousands in flights, hotels, and countless hours trying to figure it out. The nearest Mercedes Benz dealership is 270 miles away, and towing will break me.
- Structure › Body
Passenger side grab handle physically separated from the body of the vehicle. Inspection confirmed the separation was caused by the failure of the factory welds securing the handle.
- Electrical system
Mercedes dealership refused to replace ism module and I'm driving with blank instrument panel! No rmp no mph no gas gauge no milage nothing! This vehicle is my only source of income as I'm a delivery driver! It's my only vehicle! I need this fixed now or I can't pay my bills! This part is recalled and I expect them to fix it!
- Steering
Power steering hose is too short from factory, mine came loose while driving and I lost power steering assist unexpectedly. In checking forums, this is an EXTREMELY common problem and has existed since at least 2018 - mine is a 2022.
- Lane departure › Assist
Hello. There is a Crosswind Assist feature on the van that is downright dangerous. When it engages it breaks and corrects the vehicle in a way that will result in an actual crash, worse than what the feature is intended to do. This could be a great feature if it didn’t cause more harm than good. It overcorrects. Almost caused me to hit another vehicle and run off the road.
- Electrical system › Alternator/generator/regulator
The contact owns a 2024 Winnebago Revel RV built on a 2022 Mercedes-Benz Sprinter 2500 Chassis. The contact stated while the RV was idling, the heater was activated, and the contact's wife made him aware that there was an abnormal smoke odor. Additionally, the contact stated that while the RV was…
The contact owns a 2024 Winnebago Revel RV built on a 2022 Mercedes-Benz Sprinter 2500 Chassis. The contact stated while the RV was idling, the heater was activated, and the contact's wife made him aware that there was an abnormal smoke odor. Additionally, the contact stated that while the RV was idling, the contact opened the mobile app and noticed that the Winnebago house battery was not charging. The contact also noticed the failure while driving. The RV was taken to the dealer, where the alternator was replaced twice; however, the failure persisted. The RV was taken to Coastal RV Center (6075 Savannah Hwy, Ravenel, SC 29470); where it was diagnosed and determined that the alternator needed to be replaced; however, the part was not available. The vehicle was not repaired. The manufacturer was notified of the failure and informed the contact that the part was not available. The failure mileage was approximately 600.
- Engine
I have a 2022 Mercedes Sprinter with the M274 engine. At approximately 139,100 miles the check engine light came on and my driver was stranded on [XXX] . I took the vehicle to Mercedes-Benz of Kansas City South for diagnosis. I was told that the #4 piston cracked and scored the engine wall. I was…
I have a 2022 Mercedes Sprinter with the M274 engine. At approximately 139,100 miles the check engine light came on and my driver was stranded on [XXX] . I took the vehicle to Mercedes-Benz of Kansas City South for diagnosis. I was told that the #4 piston cracked and scored the engine wall. I was quoted $23,820.12 to replace the engine long block. When I asked about trading the vehicle in, they offered me $2,000 for it if I was willing to purchase another vehicle from them. I did some research and there is currently a class-action lawsuit for this exact issue. In reading the comments of various class-action lawsuit websites, this seems to be a manufacturing issue that Mercedes knows about, but is doing nothing to fix the issue. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system
Charging issue with house battery side of class B camping van. It became somewhat apparent the system was not charging properly and quickly escalated to a high overcharge situation, followed by evidence of electrical short in smells and possible smoke in engine bay. The car was in for service…
Charging issue with house battery side of class B camping van. It became somewhat apparent the system was not charging properly and quickly escalated to a high overcharge situation, followed by evidence of electrical short in smells and possible smoke in engine bay. The car was in for service for a month and a half. I am not sure the issue is completely resolved and Winnebago has been fairly unresponsive when asked questions afterwards. This issue could cause a fire. There are multiple units with similar issues. Ultimately the secondary alternator was replaced, and a recall kit applied. I am not sure what the specific kit entailed. The repair was done at Johnson RV in Sandy Oregon
- Lane departure › Assist · Unknown or other
My van has a "cross wind assistance" feature that can not be turned off. Apparently it helps to keep the vehicle in the lane during cross wind situation, I found it to be way too aggressive and turning itself for no apparent reason. I find it that while it may be helpful in some situations it certainly does more harm than good.
- Air bags · Electrical system
On [XXX], I purchased a new 2022 Mercedes Benz Winnebago Adventure Wagon (“RV”) from La Mesa RV located in Phoenix, AZ. Prior to purchase, while doing research online, it came to my attention that there was an NHTSA Safety Recall for this particular year/model that affected wires under the seat…
On [XXX], I purchased a new 2022 Mercedes Benz Winnebago Adventure Wagon (“RV”) from La Mesa RV located in Phoenix, AZ. Prior to purchase, while doing research online, it came to my attention that there was an NHTSA Safety Recall for this particular year/model that affected wires under the seat and potential Airbag deployment. (NHTSA Part 573 Safety Recall Report #24V-318). Once I learned of the safety recall, I contacted the dealer on September 21 to determine if this particular vehicle was part of the recall and/or if it has been repaired. On September 23, a representative from La Mesa RV contacted me and assured me this specific vehicle was not part of the recall and does not require a repair. After purchasing the RV, I contacted Winnebago directly to inquire about the warranty and any pending recalls, specifically NHTSA #24V-318. The representative from Winnebago confirmed that this specific RV (verified by VIN) was in fact part of the recall and should have been repaired by the dealer prior to sale. On November 6, 2024, I emailed the manager at La Mesa RV to report the misinformation provided by them and requesting immediate remedy. The manager nor any representative from La Mesa RV responded to address this issue. La Mesa RV appeared to ignore the safety recall and sold a new vehicle to me without repairing a known issue. They have not offered any remedy or correction. Dealer contact info: La Mesa RV, 7525 W. McDowell Rd, Phoenix, AZ 85035. Thank you for your attention to this matter. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine
The engine fan fell off, broke off, sheered off at the bolt that attaches it to the engine. The van is brand new this happened with less then 3000 miles on it. We realized an issued when the van gave a warning to stop immediately and turn off engine. This warning came on 3-4 times as we tried to…
The engine fan fell off, broke off, sheered off at the bolt that attaches it to the engine. The van is brand new this happened with less then 3000 miles on it. We realized an issued when the van gave a warning to stop immediately and turn off engine. This warning came on 3-4 times as we tried to ascend the pass. We had not place to go on this road. We pulled off several times waiting and hour to let it cool just to travel 3 miles.We just thought we may be running to hot. It was warm out, on an incline on Logans Pass in Glacier national park. Once we coasted out of the park after several hours of this situation and were able to safely get under and look we discovered the fan was dangling in the engine compartment. We contacted a dealer in Billings who told us they have seen several of these. We have read several sprinter van forums and Facebook pages where numerous people are reporting the same issue. The Missoula Mercedes Benz dealer replace the pully, the belt and the fan. The said they were going to replace the water pump, but did not. We requested the parts from them and they would not allow us to have them. We requested pictures of the parts and they still have not been supplied to us. We have a few pictures of the damaged bolt. The service tech was initially just going to rethread the bolt. This a know problem by Mercedes Benz, Winnebago and they are taking no measures to correct it. Repaired it putting the same parts back on. What is to ensure this will not happen again. We were in a remote area of Northern Montana with limited service. We were essentially stranded there for three days.
- Engine · Fuel/propulsion system
I have had to have the EGR valve cleaned out 4 times in 18000 miles. The dealer states it carbonized and causes bucking and hard shifting. This is a great hardship as to lost time of vehicle in service. Smithtown Mercedes has told me it is a known issue with no current resolution other than cleaning the EGR every 3 months.
- Unknown or other
Crosswind Assist feature can't be disabled at the moment and is extremely dangerous. This "feature" can randomly kick on while driving around others and unexpectedly do things like breaking / swerving etc... which is extremely dangerous for both the drivers but others that might not understand…
Crosswind Assist feature can't be disabled at the moment and is extremely dangerous. This "feature" can randomly kick on while driving around others and unexpectedly do things like breaking / swerving etc... which is extremely dangerous for both the drivers but others that might not understand what is going on with you and therefore create an accident. Mercedes needs to provide an option for sprinter's owner to disable this dangerous so called "feature".
- Engine
It’s feels like hard shifting losing power on a highway Check engine light on I bought the van brand new. I have this issue since 4000 mile on the dashboard. I brought it in over six times for repairs. Nothing has been resolved.
- Unknown or other
Mercedes has not issued a remedy for the recall in a timely manner and has not been able to issue a date when the remedy will be available.
- Electrical system
The contact owns a 2022 Mercedes-Benz Sprinter 2500. The contact received notification of NHTSA Campaign Number 24V160000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the battery warning light had illuminated. The contact was…
The contact owns a 2022 Mercedes-Benz Sprinter 2500. The contact received notification of NHTSA Campaign Number 24V160000 (Electrical System) however, the part to do the recall repair was not yet available. The contact stated that the battery warning light had illuminated. The contact was instructed by the manufacture Jayco to not turn the vehicle off due to battery failure. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. The failure mileage was unknown. VIN tool showed no open recall.
- Lane departure › Assist
Side wind assist is an absolute disaster. It triggers when passing semi trucks and immediately brakes the van and veers into the lane with the truck. This causes the truck to take evasive action and the cars behind to have to brake abruptly. It also will do the same without warning with both…
Side wind assist is an absolute disaster. It triggers when passing semi trucks and immediately brakes the van and veers into the lane with the truck. This causes the truck to take evasive action and the cars behind to have to brake abruptly. It also will do the same without warning with both mild and strong side winds. It is so unpredictable as to be dangerous. MB is aware of the issue but denies any ability to address it.
- Forward collision avoidance › Automatic emergency braking · Lane departure › Assist
The Cross Wind Assist feature on the Mercedes Sprinter is extremely flawed and dangerous. It is also the only assistance system you cannot disable. We have brought it up to Merceds Benz mechanics and dealers and they are aware of the issues, but say there is currently no fix from corporate. I…
The Cross Wind Assist feature on the Mercedes Sprinter is extremely flawed and dangerous. It is also the only assistance system you cannot disable. We have brought it up to Merceds Benz mechanics and dealers and they are aware of the issues, but say there is currently no fix from corporate. I have had the system activate hundreds of times on short windy drives. The last incident was driving through Nebraska from Omaha to the Colorado border. The system engaged 600-800 times. It was windy, but the danger wasn't the wind, it was the cross wind assist feature. When the system engages (which appears to be random at times) it brakes one of the front wheels in the direction opposing wind gusts. When this happens your front nose dips sharply in that direction and makes the van rock violently. It does this particularly when other cars or semi-trucks are passing. Sometimes it does it back to back as if the system is engaging to correct itself. It's truly dangerous. I don't know how they released a vehicle with this feature. I was hoping a brand new van of this quality would make long drives feel safer. My experience has been the opposite.
- Electrical system · Exterior lighting · Visibility/wiper
My message belongs to all vehicle manufacturers. Especially the business/commercial vehicles like mine . Which we spent most of our time inside it, during the work periods'. I would like to ask a favor to take a better attention when it comes to Safety/Comfort /look. We don't Race or Camp but…
My message belongs to all vehicle manufacturers. Especially the business/commercial vehicles like mine . Which we spent most of our time inside it, during the work periods'. I would like to ask a favor to take a better attention when it comes to Safety/Comfort /look. We don't Race or Camp but work and sometimes live there. Most of the time me and my hardworking colleagues don't complain a lot. Because we don't have time. Sometimes we also wanna grab a Starbucks coffee, if they can make the drive thro clearance just a little bit higher. The future is in all of us hand, let's work together to make this life safer and more pleasure! Without discriminating each other. We don't ask for Shiny Chrome wheels. But we need you to install, all of your best safety systems without asking " Do i want or not ?" Because sometimes we might say no without know why. Until we get killed and died. I am writing this message because i got survived. I found attractive property for leases in one of RE apps. Because that address was on my way back. I came there, and parked right across the street, while idling my vehicle, dreaming of my automotive shop. "Wow I might have a Downtown View its so nice". A lots of other places says " No Automotive Businesses" even tho " Zoning was allowed " but this place was not. And just about minutes later, the car slowly came and stopped next to me with a full of young guys inside. Masks on their face, globs and guns on their hands. They dragged me down hit me with a gun , until I think about "is it real or what ?". What i remember ." Where is money, key, phone " repeatedly by mixing bad words . I told them "Take everything inside". Cause i scared and was hoping for the help. "Can my van give little sound & Light so 911 can see us ? Forgetting, you don't have that Trim . Then some how they left. Rushed to get back to my seat, pushing the emergency button and no click. I ask the guy who's riding a bike "call911' but he " no need to go work By!"
- Wheels › Rim
The contact owns a 2023 Storyteller Overland Classic Mode 4x4 RV built on a 2022 Mercedes-Benz Sprinter 2500 Chassis. The contact stated that while driving at 65 MPH, the rear driver's side wheel was leaking air. The low tire pressure warning light was illuminated. The contact inflated the rear…
The contact owns a 2023 Storyteller Overland Classic Mode 4x4 RV built on a 2022 Mercedes-Benz Sprinter 2500 Chassis. The contact stated that while driving at 65 MPH, the rear driver's side wheel was leaking air. The low tire pressure warning light was illuminated. The contact inflated the rear driver's side tire, but the tire deflated within an hour. The vehicle was taken to a tire repair center, where the contact was informed that the wheel was cracked on the inside. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and approved the claim for the wheel replacement. The wheel was replaced. The failure mileage was 18,000.
- Electrical system · Forward collision avoidance › Adaptive cruise control
The contact owns a 2022 Mercedes-Benz Sprinter 2500. The contact stated while driving at various speeds with the cruise control activated, the vehicle experienced phantom braking, with the traction control warning light illuminated. The contact stated that the failure had occurred several times…
The contact owns a 2022 Mercedes-Benz Sprinter 2500. The contact stated while driving at various speeds with the cruise control activated, the vehicle experienced phantom braking, with the traction control warning light illuminated. The contact stated that the failure had occurred several times while the cruise control was activated. The contact stated that the failure worsened over time. The contact stated that the failure ceased after turning off the cruise control feature. In addition, the contact stated that the Forward Collision Avoidance feature was disabled and failed to operate as needed. The dealer was notified of the failure; but the manufacturer was not yet notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 6,800.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011223SMOG/Emissions Test fail due to one or more Readiness Monitors not set Complaint: The vehicle has failed the State Emissions Certification because one or more of the OBDII readiness monitors are not completely set. Cause: One or more of the following Readiness Monitors are not fully set within XENTRY: Misfire Monitoring - Injection System Fuel System Monitoring - Injection System, Fuel System, EGR Valve, O2 Sensor NMHC Catalyst Monitoring - NMHC/Diesel Oxidation Catalyst NOx Aftertreatment Monitoring - SCR Catalyst System Boost Pressure System Monitoring - Turbocharger, Charge Air System Exhaust Gas Sensor Monitoring - O2 Sensor, NOx Sensors Diesel Particulate Filter Monitoring - Diesel Particulate Filter System Exhaust Gas Recirculation System Monitoring - EGR Valve and system Remedy: Please complete the required driving conditions to fully set the incomplete Readiness Monitor. DO NOT: - Erase any fault codes. If fault codes are present, process these and allow the readiness drives to clear fault codes. - Flash or SCN code the CDI or SCR control units. - Perform a manual DPF regeneration, unless instructed below. - Disconnect the main battery.
- 11009856Complaint: Check engine light with fault code: P300E3B the efficiency of component 'SCR catalytic converter' is not sufficient, is present in the CDI control unit CDI (N3/28). Cause: This subject is currently being analyzed for all 907s equipped with the OM642 engine. Follow the instructions related to this subject to collect information about your vehicle. After completing the checks, please open a TIPS case and at-tach the collected information.
- 11009854Complaint: Noises when reversing slowly <5 km/h (squeaking) Cause: There is a seal in the electric drivetrain that seals off the coolant system from the electric motor. This seal is moistened with coolant during forward travel. As a result of the change in rotational direction when reversing slowly, it may be the case that this sealing ring is no longer moistened. Squeaking noises may occur as a result of the so-called "stick-slip effect". This behavior does not impact the function or durability of the sealing ring and electric drivetrain. Remedy: Do not replace any parts. Explain the cause of the noises to the customer.
- 11008717Complaint Check engine light with fault code: P300E3B the efficiency of component 'SCR catalytic converter' is not sufficient, is present in the CDI control unit CDI (N3/28). Cause This subject is currently being analyzed for all 907s equipped with the OM642 engine. Follow the instructions related to this subject to collect information about your vehicle. After completing the checks, please open a TIPS case and attach the collected information. Remedy Please complete the following inspections and tests: 1. Perform a tailpipe wipe test and document the results along with photographs. 2. Inspect the NOx connectors, pins, crimps, and harnesses between N37/7 and N37/8 to F152f59, Z7108, W105/3, and X30/81. 3. Provide actual values/sensor plausibility test results for all pressure and temperature sensors with the engine com- pletely cooled off for at least eight hours, the key on, and the engine off. Repeat the test with the engine/exhaust at operating temperature and the engine idling. 4. Perform a pressurized smoke test of the intake, charge air system, and exhaust to verify that there are no leaks. Apply overpressure (not exceeding 26 psi) from the exhaust pipe end and seal the system at the clean airline toward the air filter housing. Manipulate all components during the smoke test. 5. Provide diesel particulate filter actual values and regeneration history. 6. Inspect the SCR temperature sensor wirings and pins for electrical and physical correctness. Determine whether this sensor reaches operating temperature while driving and document the time it takes to reach operating temperatu- re. 7. Inspect the Adblue injector nozzle/s for clogging or leaking, and provide photographs. 8. With the Adblue injector/s removed from the exhaust system, perform two to three Adblue pressure tests and check for leaks. If leaks are detected, provide photographs. 9. Collect an Adblue sample, test fluid quality, and provide notes on its condition and quantity (color, clarity, separati- on, odor, etc.), along with a photograph for review. Also, provide a photograph of the spray pattern. 10. Separate the exhaust pipe downstream of the diesel particulate filter, inspect the diesel particulate filter and SCR, and note any soot, blockage, or damage. Provide photographs. 11. Inspect the SCR catalyst interior for dried Adblue residue, and provide photographs. 12. Perform several test drives at varying speeds to gather graphical illustrations (screenshots of the completed graphs in PDF format) of signals from NOx sensors. Provide three to four graphs or actual values of operational NOx sensors with XENTRY; see attachments for examples. Additionally, provide one graph/screenshot of the vehicle idling at operating temperature. Disconnect the Adblue injection valve, drive for approximately 30 minutes to exhaust all Ad- blue within the SCR catalytic converter, and provide two to three additional NOx graphs/screenshots with the sensor disconnected. (see attachments for needed graphs)
- 11005575Complaint T57 Electric step inoperative with warning on cluster. Cause Possible damage to end position sensors.
- 11005574Complaint Front door collides with fender. Cause Excessive dynamic stress results in permanent deformation of the lower hinge and causes the front door to collide with the fender. This can result in damage to the door holder and the front door at the threaded connection of the door holder.
- 11003187Mercedes-Benz AG, the manufacturer of Mercedes-Benz Vans, has determined that on certain Sprinter and Metris vehicles, the B-pillar certification label might not contain information on the vehicle's rim size, tire size, and cold tire inflation pressure required under FMVSS 110 or, as applicable, FMVSS 120. In this case, relevant regulatory requirements might not be met. Mercedes-Benz believes this issue has no impact on vehicle safety. Mercedes-Benz intends to submit a petition to NHTSA for exemption from the notification and remedy requirements of 49 U.S.C. chapter 301, pursuant to 49 CFR Part 556, on the basis that this non-compliance is inconsequential as it relates to motor vehicle safety. MBUSA will conduct a service campaign to remedy new vehicles in dealer inventory. An authorized Mercedes-Benz dealer will replace the Certification Label on the affected vehicles.
- 11001114Complaint A: The engine is jolting/bucking between 1700 and 1900 rpm. Complaint B: One or more mechanical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of mechanical fault codes in table below. NOTE: If one or more electrical related fault codes for EGR Valve are also present in CDI, utilize Complaint C. Review list of electrical fault codes PDF document in attachments. Complaint C: One or more electrical related fault codes for EGR Valve stored in CDI control unit, with possible Check Engine Light. Review list of electrical fault codes PDF document attached. Cause of Complaint A: Increased friction between the EGR Valve blade and seat due to soot deposits causing a delay of the EGR Valve being able to reach the target value of the EGR Valve position controller. NOTE: This causes the EGR Valve blade and potentially the boost pressure controller to oscillate. Cause of Complaint B: Soot deposits between the EGR Valve blade and seat leading to the EGR Valve no longer being able to meet the desired target of the EGR Valve position controller. Cause of Complaint C: Internal EGR Valve or other electrical faults related to the EGR Valve function.
- 11001110Complaint: Front door collides with fender. Excessive dynamic stress results in permanent deformation of the lower hinge and causes the front door to collide with the fender. This can result in damage to the door holder and the front door at the threaded connection of the door holder. Remedy: 1. In the event of damage to be claimed under warranty, please follow warranty guidelines 10.11.1 (see note) 2. Damaged body components will need to be repaired or replaced by a MB certified collision center. While at the collision center, please request a visual check for cracks on threaded connection of door holder in front door. 3. Replace lower hinge of front door on affected side of vehicle. (lower hinge will need to be painted) 4. Replace door holder (on both sides) with modified, shortened door holder. 5. For a repeat failure on a vehicle that has been previously repaired with the updated parts, Please create a PTSS case.
- 10253244Propeller Shaft Check Strap on the crossmember may not have been installed.
- 10251090Check Par????on Wall Bolts
- 10251085Check patrition Wall Bolts
- 10249333Mercedes-Benz AG, the manufacturer of Sprinter vehicles, has determined that on certain Sprinter (907 platform) vehicles, the chemical composition of the topcoat paint might not meet specifications. In such case, adhesion of the fixed windows to the vehicle body might be impaired. As a result, a loosening or detachment of the windows cannot be ruled out over the vehicle's lifetime, which could increase the risk of injury in the event of a crash. In addition, loosening of secured objects cannot be ruled out for vehicles with lashing rails, which could increase the risk of injury for vehicle occupants.
- 10249332Mercedes-Benz AG, the manufacturer of Sprinter vehicles, has determined that on certain Sprinter (907 platform) vehicles, the chemical composition of the topcoat paint might not meet specifications. In such case, adhesion of the fixed windows to the vehicle body might be impaired. As a result, a loosening or detachment of the windows cannot be ruled out over the vehicle's lifetime, which could increase the risk of injury in the event of a crash. In addition, loosening of secured objects cannot be ruled out for vehicles with lashing rails, which could increase the risk of injury for vehicle occupants.
- 10246043Please see the atached documents related to the campaign listed above.
- 10246041Please see the atached documents related to the campaign listed above.
- 10241385Replace Fuel Delivery Module.
- 10240168Various concerns in relation to electric power steering including Rattling/humming noise from electric power steering when steering fully turned (see video recordings 01 and 02).
- 10236406Update Instrument Cluster Software
- 10236404Update Software-Driver Alert
- 10236403Update Software-Driver Alert
- 10235072Software Updates.
- 10235071Software Updates.
- 10235070Software Updates.
- 10235069Software Updates.
- 10235068Software Updates.
- 10235067Software Updates.
- 10234058Swivel Seat Wire Harness Routing
- 10233790Complaint Noise in front door from window regulator when driving. Cause Loosened nut of window lifter leads to screw connection at bottom of door breaking the mounting point in the door (see attached picture). Remedy Glue in repair panel A 910 722 33 00 and screw in again with collar nut A 005 990 64 50. When using the adhesive, observe the following: Roughen the bonding surfaces slightly and clean them so that they are free of grease in order to guarantee secure bonding.
- 10233787Complaint Vehicles with SCR Generation 4: SCR/AdBlue warning message cannot be reset. Information: All fault codes in AdBlue (SCR) control unit have been processed and rectified; however fault code P13DF00 remains active and stored in the AdBlue (SCR) control unit. Cause The procedure for resetting the SCR/AdBlue warning message with XENTRY Diagnosis has not been carried out. Information: In order to reset the SCR/AdBlue warning message for SCR Generation 4, the AdBlue system needs to be checked. Remedy Follow Diagnostic Instructions
- 10232555Update Software - Comfort Function
- 10232551(RC)Update Park Lock Function
- 10232325Complaint Check engine warning light active. Fault code P300CA8 or P300CA9 "Hot film mass air flow sensor malfunction" is present in engine control unit. Cause a) In the case of fault P300CA8: Due to incorrectly installed component parts of the clean air line between the air filter box and the exhaust gas turbocharger, it is possible that leaks may occur in the system which subsequently result in air mass faults A fouled air filter or leaks in the intake or charge air system downstream of the exhaust gas turbocharger may also cause these faults. b) In the case of fault P300CA9: Computational model for programmed values of air intake, in particular, for the high load mode, calculates this high load correction programmed value incorrectly. This leads to the programmed value drifting too quickly towards the limit. Remedy Install the following add-ons: 18937 for XENTRY 12/2020 18938 for XENTRY 03/2021
- 10232323Complaint MIL illuminated. Fault codes for 'position sensor of crankshaft' in combination with fault codes for 'Output stage fuel injectors' are set in the CDI control unit.
- 10232322Complaint Engine runs irregularly and it shakes. Indicator lamp lights up. Information: Fault codes for injectors and/or combustion misfires may be stored in the CDI control unit: On engine 642 cylinder 6 is affected. On engine 651 cylinder 2 is affected. Cause Charge air from the exhaust gas recirculation is condensed after being introduced into the charge air section. Information: Under certain operating conditions, condensation that has collected in the charge air cooler can enter the combustion chamber to a damaging degree and a damage profile is then generated (connecting rod bent). Remedy Perform following testing and diagnosis operations
- 10231020Complaint Various issues including control unit programming procedure will not complete successfully/no newer software found, communication faults, or sporadic malfunction of systems. Cause Aftermarket CAN device could be installed into the vehicle's CAN network. Such devices can be but are not limited to, remote start modules, CAN blockers, or high idle modules. Remedy A successful control unit programming session cannot be ensured while aftermarket devices are connected to the vehicle's CAN network. Some of the device companies supply a bypass to allow control unit programming.
- 10228818Complaint Various customer concerns of Climate Control system operating inadequately. Cause Stepper motor linkage in the heater case may cause a mechanical fault during actuation during unfavorable environmental conditions. NOTE: If the vehicle is equipped with H13 (rear additional heat exchanger), There is an additional stepper motor in the rear heater case under the vehicle. This stepper motor can influence the normalization process. May include fault code: B1A9C07 the output for control valve "Left water valve" has a malfunction. There is a mechanical fault. The component is called N29/12 (rear additional heat exchanger ) . Remedy: See instructions
- 10228812Complaint Distronic and/or Active Brake Assist inoperative after driving for an extended period Cause Blindness detection of the radar sensor. When driving for extended periods in areas with few or no objects for the radar sensor to detect, the radar sensor switches off due to the self-test and sets fault code C174AFB - The adjustment of the 'Active Brake Assist' control unit has malfunctioned. Remedy Check the area of the front radar for damage. Check whether fault code "C174AFB - The adjustment of the 'Active Brake Assist' control unit has malfunctioned" is set in the B92 or B92/1 Active Brake Assist/Active Distance Assist DISTRONIC (ABA/DTR) (FCW177) control unit. If the fault code is present, check the vertical actual values. If these are not OK, please correct the value with inspection of installation position or calibration of installation height (see attachment 2021 NDTD_Vans_Radar Sensor for best practices and functionality info) If the actual values are OK, please update the software.
- 10228609(SC)Replace Front Door Check
- 10228601(RC)Update Park Lock Function
Every Mercedes-Benz Sprinter 2500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.