2009 BMW X5
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2009 BMW X5. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
12 recalls name the 2009 BMW X5. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2009-2012 X5 xDrive35d, 2008-2012 X6 xDrive35i, X6 xDrive50i and X6 M, 2007-2012 X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M and 2010-2011 X6 ActiveHybrid vehicles equipped with non-desiccated, passenger frontal air bag inflators containing phase stabilized ammonium…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until this remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag, free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d vehicles and 2010-2011 X6 ActiveHybrid vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 14, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2009-2013 X5 xDrive 35d diesel vehicles. The engine idler pulley bolt may loosen over time and break.
Risk and remedy
Risk
If the idler pulley bolt breaks, the vehicle may unexpectedly lose power-assisted steering, increasing the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the idler pulley bolt with an improved part, free of charge. The recall began March 11, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, 2009-2010 X5 xDrive35d vehicles and 2009-2013 X6 xDrive35i, X6 xDrive50i, and X6 M vehicles ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag module, free of charge. The recall is expected to begin March 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2012 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X6 xDrive35i, X6 xDrive50i, and X6 M vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the front passenger air bag inflator or air bag module, free of charge. Interim letters were mailed March 2017. Owners will receive a second notice when remedy parts become available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i…
Risk and remedy
Risk
The loose wires may cause the connector to melt, resulting in a fuel leak. Additionally, the fuel pump may stop working, possibly causing an engine stall and increase the risk of a crash.
Remedy
BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, 2009-2011 X5 xDrive35d vehicles, 2008-2011 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, and 2010-2011 X6 ActiveHybrid vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger frontal air bag inflator or air bag module, free of charge. The recall began July 28, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW is recalling certain model year 2009-2010 X5 xDrive35d vehicles equipped with a diesel engine and manufactured from June 13, 2009, through November 9, 2009. The fuel filter heater, which is used for warming up the diesel fuel during vehicle operation at low outside temperatures, could experience an electrical overload condition and become permanently…
Risk and remedy
Risk
The fuel filter heater could remain activated even when the ignition is off and lead to a dead battery. The unit could also overheat, possibly resulting in a vehicle fire.
Remedy
BMW will notify owners, and dealers will replace the fuel filter heater, free of charge. The safety recall began on September 26, 2013. Owners may contact BMW customer relations at 1-800-525-7417.
BMW IS recalling certain model year 2009 X5 xdrive35d vehicles equipped with a diesel engine and manufactured from october 1, 2008, through june 12, 2009. the fuel filter heater, which IS used for warming up the diesel fuel during vehicle operation at low outside temperatures, could experience an electrical overload condition and become permanently…
Risk and remedy
Risk
The fuel filter heater could remain activated even when the ignition IS off and lead to a dead battery. the unit could also overheat, possibly leading to a vehicle fire.
Remedy
BMW will notify owners, and dealers will replace the fuel filter heater free of charge. the safety recall began on october 11, 2011. owners may contact BMW customer relations and services at 1-800-525-7417.
BMW IS recalling my 2009 X5 and X6 vehicles. the rear brake discs may not have been manufactured according to specifications. as a result, a reduction in braking performance at the affected rear wheel could occur.
Risk and remedy
Risk
In an extreme case, the affected rear brake disc could break resulting in a loss of braking at that wheel increasing stopping distances and the risk of a crash.
Remedy
BMW will notify owners and will repair the vehicles by inspecting the rear brake discs and, if necessary, replace them free of charge. the safety recall began on september 11, 2009. owners may contact BMW customer relations and services toll-free at 1-800-525-7417.
Owner complaints
138 complaints3 involved a crash8 involved a fire3 injuries
What owners report most
Latest complaints
- Engine and engine cooling
The contact owns a 2009 BMW X5. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated, and the engine seized. The vehicle failed to restart. The vehicle was towed to an independent mechanic who was a certified BMW mechanic, where it was diagnosed with…
The contact owns a 2009 BMW X5. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated, and the engine seized. The vehicle failed to restart. The vehicle was towed to an independent mechanic who was a certified BMW mechanic, where it was diagnosed with VANOS bolts failure. The contact was informed that the VANOS bolts needed to be replaced. The vehicle was not repaired. The dealer was made aware of the failure but provided no assistance. The contact referenced NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the VIN was not included in the recall. In addition, the contact stated that the dealer confirmed the failure and declined to perform a diagnostic test due to the age of the vehicle. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 175,000.
- Engine and engine cooling
The contact owns a 2009 BMW X5. The contact stated that after pulling into a parking space there was white smoke coming from underneath the hood of the vehicle and the engine started overheating. The contact added coolant immediately. There were no warning lights illuminated. The failure had…
The contact owns a 2009 BMW X5. The contact stated that after pulling into a parking space there was white smoke coming from underneath the hood of the vehicle and the engine started overheating. The contact added coolant immediately. There were no warning lights illuminated. The failure had occurred twice. The vehicle was taken to a certified mechanic who diagnosed that the water pump, thermostat, and heater hoses had failed and needed to be replaced. The vehicle was repaired. The contact stated that the coolant had leaked out and the engine started overheating. The contact added more coolant to the coolant reservoir; however, the failure recurred 20 miles later. After parking the vehicle, the contact became aware that oil was leaking underneath the vehicle. The vehicle had not been returned to the mechanic. The vehicle had not been taken to the dealer. The manufacturer was informed of the failure however, the VIN was not included in a recall. The manufacturer referred the contact to the NHTSA Hotline to file a complaint. The failure mileage was 230,000.
- Air bags · Seats
Front Passenger occupant seat sensor failure warning code oc3
- Electrical system · Engine · Fuel/propulsion system
Crank no start scanner saying it is in 3rd gear not park.
- Fuel system, gasoline
The contact’s son owns a 2009 BMW X5. The contact stated that while driving at approximately 30 MPH, the vehicle stalled. The contact was able to veer the vehicle off the road. No warning light was illuminated. The vehicle was towed to an independent mechanic where it was diagnosed that the fuel…
The contact’s son owns a 2009 BMW X5. The contact stated that while driving at approximately 30 MPH, the vehicle stalled. The contact was able to veer the vehicle off the road. No warning light was illuminated. The vehicle was towed to an independent mechanic where it was diagnosed that the fuel pump module failed and needed to be replaced. The contact was then informed by the mechanic of NHTSA Campaign Number: 16V746000 (Fuel System, Gasoline). The dealer was notified of the failure and confirmed that the VIN was included in the NHTSA Campaign Number 16V746000 (Fuel System, Gasoline). The vehicle was then towed to the dealer where the contact was informed that the VIN was included NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) but not the recall related to the failure. The vehicle had not been repaired. The manufacturer was notified of the failure and confirmed that the VIN was not included in the recall and advised the contact to call the NHTSA Hotline. The failure mileage was approximately 140,000.
- Power train
My vehicles serpentine belt broke twice and my A.C. belt broke once due to the tensioner pulley bolt loosening over time. I lost power steering and power of the over all vehicle. I was driving at 60 miles per hour, there has been a recall on this part for this exact same model but BMW is saying it is vin specific. This is very unsafe.
- Fuel/propulsion system · Steering
The vehicle backfires and stalls on the road due to BMWs defective pcv crankcase valve. The valve put pressure inside engine which it couldn't handle causing a blown gasket and oil leak, the leak fell on the serpentine belt and AC belt and they slipped off. Causing the power steering to lock up on…
The vehicle backfires and stalls on the road due to BMWs defective pcv crankcase valve. The valve put pressure inside engine which it couldn't handle causing a blown gasket and oil leak, the leak fell on the serpentine belt and AC belt and they slipped off. Causing the power steering to lock up on me while driving. The engine has a whistling noise coming from it. I'm parking and towing to bmw. I can diagnose it without there scanner. This is crazy and very dangerous.
- Electrical system
The contact owns a 2009 BMW X5. The contact stated that while driving approximately 60 MPH, smoke was suddenly coming through the air vents and vehicle started losing motive power before stalling. The vehicle was towed to the local dealer who diagnosed that the passenger’s side main wiring harness…
The contact owns a 2009 BMW X5. The contact stated that while driving approximately 60 MPH, smoke was suddenly coming through the air vents and vehicle started losing motive power before stalling. The vehicle was towed to the local dealer who diagnosed that the passenger’s side main wiring harness was charred and melted and needed to be replaced. The wiring harness was replaced but the failure immediately reoccurred. The cause of the failure was not yet determined. The manufacturer was not notified. The failure mileage was 140,000.
- Unknown or other
More than one time I have been traveling at regular speed and the vehicle will suddenly power off and shift into Park. While I’m driving, the battery still has power but the engine shuts off. I am suddenly stopped in the middle of the highway, turning in an intersection, going up a incline. I then…
More than one time I have been traveling at regular speed and the vehicle will suddenly power off and shift into Park. While I’m driving, the battery still has power but the engine shuts off. I am suddenly stopped in the middle of the highway, turning in an intersection, going up a incline. I then try to start the vehicle and it will not turn over. The car remains stuck in park. Eventually the battery wears down and will not even engage the starter. But the lights and flashers will still be on. I have taken the car in multiple times to the bmw dealership telling them of the situation and they tell me it is not showing any problem. The vehicle does not give any warning and there are no engine or warning lights that appear. This happens at any time of day. There are constant complaints of these issues happening with multiple models of bmw.
- Electrical system · Engine · Fuel/propulsion system
My engine is being effected by the recall. There is smoke and a burning smell coming from my engine. The Recall was issued March 2 2002 and today is January 11, 2022. My truck is driving worse daily and I can not get it inspected because it will not read my system.
- Engine and engine cooling
The contact owns a 2009 BMW X5. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2009 BMW X5. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer and manufacturer were made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system
While parked in my driveway, the car by it self caught fire and melted the entire fusebox, major wire harness, entire right rear panel was burnt and melted, rear headliner, and rear light housing. When I opened the door there was a huge black cloud of smoke inside.
- Fuel/propulsion system
I just went to Union Park Bmw about my car, they stated that my car fuel pump was recalled in 2017 so it was fixed, in 2021 l was stranded twice in 100 degree weather on the side road when the fuel pump went out, so this is the third time this vehicle has had new fuel pumps, now this month on…
I just went to Union Park Bmw about my car, they stated that my car fuel pump was recalled in 2017 so it was fixed, in 2021 l was stranded twice in 100 degree weather on the side road when the fuel pump went out, so this is the third time this vehicle has had new fuel pumps, now this month on Tuesday 7 /19 when it was hot as hades it stopped again same way it did prior , had it towed and they stated it was wiring that leads to the engine from the fuel pump. They made sure as part of there man made 358.00$ diagnosis that it was not related to the fuel pum.
- Fuel/propulsion system
During extreme hot days car has just stopped without warning three times. Fuel pump has been replaced twice , now they are saying wiring from the fuel pump to the computer system the wiring bad? No warning ever!
- Electrical system · Visibility/wiper
Headlight wires are made poorly. Susceptible to heat damage. The wire insulation cracks off, leaving bare copper wires to touch. Therefore, the low beams, etc will no longer function. The only solution is $3,000+ on new headlights.
- Fuel/propulsion system
I was returning home from work and the engine started to sputter/vibrate. I was right next to a gas station and as I was pulling into the gas station, the engine died and would not restart. I had the car towed and then I proceeded to troubleshoot the problem. I did a fuel pressure test and found…
I was returning home from work and the engine started to sputter/vibrate. I was right next to a gas station and as I was pulling into the gas station, the engine died and would not restart. I had the car towed and then I proceeded to troubleshoot the problem. I did a fuel pressure test and found that there was no fuel pressure. I tested the fuel pump relay and found it to be operational. I accessed the primary fuel pump to check power and found the fuel pump wiring to be missing an inch of insulation on both wires and the insulation is brittle for another inch or two. There were two splices on the fuel pump wiring where recall #16V746000 was performed and a new connector was spliced in. Those two splices were melted together. Recall #16V746000 was a problem with the fuel pump connector melting due to loose wiring. I have concern that there is still an issue with the fuel system wiring overheating or the repair process is not adequate to solve the issue.
- Engine
EGR Cooler leaking soot/exhaust into engine compartment.
- Service brakes
The contact owns a 2009 BMW X5. The contact stated that while approaching a stop, the vehicle would continue to accelerate upon the depression of the brake pedal. The contact also stated that the parking brake failure warning message would appear on the instrument panel. The contact had taken the…
The contact owns a 2009 BMW X5. The contact stated that while approaching a stop, the vehicle would continue to accelerate upon the depression of the brake pedal. The contact also stated that the parking brake failure warning message would appear on the instrument panel. The contact had taken the vehicle to a dealer where they replaced both front and rear brake pads; however, the failure persisted soon after repair. The dealer was notified of the failure and the contact was given a second appointment. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 70,000. The VIN was not available.
- Exterior lighting · Unknown or other
Car stuck in park and IS in fail safe mode also when trying to charge battery while it's dead it sounds like the whole car IS clicking
- Engine
Car began to overheat while driving on highway, exited highway to city street, then the alert for low coolant came on. Immediately found a place to park to keep engine from being compromised. Allowed to cool, opened reservoir and coolant was low. Added one gallon of approved coolant. Drove for 5…
Car began to overheat while driving on highway, exited highway to city street, then the alert for low coolant came on. Immediately found a place to park to keep engine from being compromised. Allowed to cool, opened reservoir and coolant was low. Added one gallon of approved coolant. Drove for 5 miles. Car sat for several hours. Started car, alert came back on. Checked beneath vehicle, all of the coolant leaked onto the ground.
- Air bags
TL* the contact owns a 2009 BMW X5. The contact stated that the vehicle was included in nhtsa campaign number: 16v364000 (air bags) and repaired at hilton head BMW dealership (1230 fording island rd, bluffton, sc 29910, (843) 815-1501) however, the ABS warning light illuminated and remained…
TL* the contact owns a 2009 BMW X5. The contact stated that the vehicle was included in nhtsa campaign number: 16v364000 (air bags) and repaired at hilton head BMW dealership (1230 fording island rd, bluffton, sc 29910, (843) 815-1501) however, the ABS warning light illuminated and remained illuminated. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 108,000. *bf*jb
- Engine
2009 BMW X5. Consumer writes in regards to defective diesel engine vehicle. *Ld *js
- Fuel/propulsion system · Suspension
There have been two occasions that I have changed the fuel pump on my vehicle. It IS extremely dangerous that it turns off suddenly. I am so afraid that this might just happen worst thing IS that there are no light indicators that will tell you that there IS something wrong.
- Fuel system, gasoline › Delivery › Fuel pump
Letter from congressman pramila jayapal on behalf of constituent regarding vehicle safety recall that dealer won't honor for his 2009 BMW X5. *Ld the consumer stated 5 minutes after getting an oil change, the fuel pump failed leaving the consumer stranded.*js
- Engine · Fuel/propulsion system · Power train
I own a 2009 BMW X5 diesel. BMW has recognized an issue with a sensor in the selective catalytic reduction (scr) active tank. The tank stores diesel fluid. Diesel fluid IS added into diesel to reduce the amount of emissions that IS released from the vehicle. BMW extended the warranty for this part…
I own a 2009 BMW X5 diesel. BMW has recognized an issue with a sensor in the selective catalytic reduction (scr) active tank. The tank stores diesel fluid. Diesel fluid IS added into diesel to reduce the amount of emissions that IS released from the vehicle. BMW extended the warranty for this part but it IS unknown how they determine the amount of this extension. My vehicle IS over the extended warranty by 4 months but under the mileage limit by 40,000 miles. This issue should be a recall call and not an extended warranty with limited time to repair the issue. I attempted to resolve this with sean s. At BMW customer relations by informing him that this IS my commuter vehicle and I have to drive this car every day. I also informed him that if not resolved this will lead to a large amount of pollution released to the environment. Sean s. Acting as a representative of BMW north america stated they are only concerned about their business and their bottom line and only will assist me if I'm a loyal customer. They viewed me as not a smart business move to fix the issue and indicated they are not concern for the environment and ok for me to continue to drive this car that IS putting out 10X the amount of pollution as gas. Researching the internet there are many BMW X5 owners driving their vehicle with this defective sensor and many using hacks to trick the ecu and many using alternative non oem parts and forcing a fitment. All of this IS due to the limited time BMW IS offering to fix this issue and the extreme cost of the repair at a BMW service center.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Idler Pulley Bolt Failure
In a May 23, 2018 letter, BMW of North America, LLC (BMW) notified the National Highway Traffic Safety Administration (NHTSA) of a safety defect that may result in the loss of power steering assist in certain model year (MY) 2009 through 2013 BMW X5 xDrive35d vehicles (Recall 18V-336). The recall, which affects…
In a May 23, 2018 letter, BMW of North America, LLC (BMW) notified the National Highway Traffic Safety Administration (NHTSA) of a safety defect that may result in the loss of power steering assist in certain model year (MY) 2009 through 2013 BMW X5 xDrive35d vehicles (Recall 18V-336). The recall, which affects approximately 33,214 vehicles built from March 12, 2008 through June 27, 2013, corrects the remedy and expands the scope of a prior BMW recall (12V-550) which addressed idle pulley bolt failure in approximately 29,800 MY 2009 through 2012 BMW X5 xDrive35d vehicles built from September 1, 2008 through November 15, 2012. BMW's analysis indicates that due to a number of contributing factors it is possible that the bolt's pre-stressing force could drop to an extent that it results in the bolt becoming loosened over time. A loosening of the bolt could cause additional bending stress on top of the bolt. As a result, the bolt could break. If this were to happen, then a sudden loss of power steering assist could occur.If there were a loss of power steering assist, manual steering capability would be retained, although the effort required to steer the vehicle would be greater, and therefore may increase the risk of crash.ODI's analysis of the complaints it has received from the public (VOQ's) and BMW complaint data submitted in response to the information request letter for RQ18-001 identified a total of 93 unique VIN reports alleging failure of the idler pulley bolt after recall 12V-550 was completed on the vehicle, including 31 VOQ's and 72 BMW consumer complaints (5 complaints received by NHTSA and BMW, 3 unique VIN's submitted multiple complaints to BMW, and 1 unique VIN submitted multiple complaints to NHTSA).BMW is developing a new idler pulley fastening system as the remedy for 18V-336.The remedy is planned to begin in February 2019.Based on BMW's safety recall, this recall query is closed.The 31 VOQ's referenced in this resume are: 10499780, 10559422, 10579534, 10655424, 10661614, 10702323, 10819617, 10903433, 10948014, 10984353, 11002447, 11010667, 11013643, 11041551, 11054759, 11054909, 11066063, 11083479, 11097562, 11098865, 11113332, 11128649, 11130277, 10552773, 10817406, 10937632, 10956710, 11032006, 11042259, 11063010, 11091513.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10247567Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
- 10245422Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicles equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
- 10244258Second seat row blocking access to third seat row, program seat modules. Visible stitching on first row sport seat. Third seat row backrest Bowden cable routing and length change.
- 10244242Various functions of the camera-based driver assistance systems (ADCAM system) can lead to customer complaints.
- 10244239This situation can result in two customer complaints: 1. Wind noise 2. Excess water entry
- 10225126Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
- 10225115Customer is unable to power up or charge accessories through a plug adapter inserted in the front 12-volt power socket plug. Alternatively, it will only operate when constant downward hand pressure is maintained.
- 10225114The front sunroof glass seal has shrunk, creating a gap which can cause wind noise or excess water entry.
- 10225113The passenger's side (right rear) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
- 10225112When returning the 2nd row seat 40% (right) side from Easy-Entry: The seat stops moving before reaching the final home position, a check control message (CCM) appears alerting the customer that the seat back is unlocked. The passenger's side (right rear 40% seat) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
- 10225111When returning the 2nd row seat 60% (left) side from Easy-Entry: The seat stops moving before reaching the final home position, a check control message (CCM) appears alerting the customer that the seat back is unlocked.
- 10225110The driver's side (left rear) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
- 10225107Coolant is leaking from under the car which is equipped with the S63 engine. A low coolant warning might also be displayed (CC Message ID166).
- 10218412The fuel gauge may indicate the incorrect fuel level (full and reserve).
- 10218384Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
- 10218382A check control message for the restraint system appears. In the Instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: short circuit to negative terminal; 93094F - Knee airbag, front passenger: short circuit to negative terminal.
- 10211851This bulletin outlines the procedure for checking the engine timing chains for wear, and should be completed in conjunction with SI B11 06 14, "N63 Customer Care Package." The N63CCP and N63 Engine Check the Timing Chain are NOT mandatory Technical Campaigns or Recalls. They should be completed only based on parts availability, workshop capacity, and the customer's schedule.
- 10200481SURFACE RUST ON NEW AIR BAG INFLATORS: The technician finds that the new air bag inflator (aka: gas generator) may have surface rust on the metalhousing .
- 10199287CLASS ACTION SETTLEMENT: N54/N54T/N55 ELECTRIC ENGINE COOLANT PUMP . With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered a nationwide settlement with the plaintiffs in the following class action: Oliver, et al v. BMW NA, et al
- 10198894CLASS ACTION SETTLEMENT: N54/N54T/N55 ELECTRIC ENGINE COOLANT PUMP . With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered a nationwide settlement with the plaintiffs in the following class action: Oliver, et al v. BMW NA, et al
- 10186215INCORRECT TORQUE SPECIFICATION FOR THE HIGH-PRESSURE PUMP IN ISTA: The current version of ISTA states the incorrect tightening torque for the High-Pressure pump M6 mounting bolts to the cylinder head cover. The correct tightening torque is only 12 Nm for the M6 bolts.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10179812CRACKING NOISES FROM THE FRONTAXLE AREA WHILE TURNING THE WHEELS, WHEN STATION: Cracking noises are heard from the front axle area while maneuvering at low speeds (e.g., parking lot maneuvers) or when turning the steering wheel while stationary.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10163026N63 ENGINE: OIL CONSUMPTION CLASS ACTION SETTLEMENT DIAGNOSIS AND REPAIR PROCEDURES. While engine oil consumption may create a customer inconvenience in the short term it should not cause any drivability problems that would prevent normal day-to-day operational use of the vehicle.
- 10163022Class action settlement: X5 (E70) with comfort access.
- 10162434Service Action: CIC - Install Navigation Road Map Database 2013. Before delivering affected vehicles to the customer, the Car Information Computer (CIC) road map database 2013 must be installed onto the CIC internal Hard Disc Drive (HDD).
- 10162431"Erroneous CC Message "Remote control! Do not switch off the engine" is Displayed. An erroneous CC message, "Remote control!" " Do not switch off the engine" is displayed in the Central Information Display (CID). The engine can still be started, even with the CC message displayed. CAUSE: Car Access System (CAS) software error"
- 10162425Creaking Noises from the B-Pillar Trim. The lower half of the B-pillar trim can make a creaking noise when driving. CAUSE: The two upper openings for the securing tabs on the bottom half of the B-pillar are too small to allow the two barbs of the upper trim to interlock.
- 10162417N63 Engine: Oil Consumption and/or Rough Running Complaints. The vehicle may consume engine oil above the permissible specification, and may run rough at times. White or blue smoke may also be seen exiting the exhaust system. CAUSE The construction material of the crankcase ventilation connection lines and vent pipes may become brittle from engine compartment temperatures.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10162404"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Follow the diagnosis test plan using the latest ISTA version. In Information Search, select the "Function Structure"" tab. Select Body, Mirror, Door mirror, Driver's or passenger side, Exterior Mirror Malfunction, and then press "Start Search". Select test plan ""AM5102_00010".
- 10162403Rear Bumper Trim Warped / Distorted. The center of the rear bumper trim is warped upward and may interfere with opening of the tailgate. No outside damage or customer influence can be detected. The center securing tabs of the bumper trim cover have been dislodged or broken off from the carrier.
- 10162395N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine has a loss of power; and the Service Engine Soon lamp is illuminated. One or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
- 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
- 10159112Preliminary class action settlement: X5 (E70) vehicles with comfort access (option code sa0322) class vehicles.
Every BMW X5 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.