2016 BMW X5
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2016 BMW X5. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2016 BMW X5. Newest first.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical…
Risk and remedy
Risk
An electrical short increases the risk of a fire.
Remedy
Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler…
Risk and remedy
Risk
A melting intake manifold increases the risk of a fire.
Remedy
Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Risk and remedy
Risk
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy
Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR…
Risk and remedy
Risk
The melting intake manifold can increase the risk of a fire.
Remedy
BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2016 X5 xDrive40e vehicles manufactured July 29, 2015, to September 9, 2015. The affected vehicles have a Digital Motor Electronic (DME) control unit that may have a loose electrical ground cable, possibly causing an under-voltage condition which would result in the transmission shifting to…
Risk and remedy
Risk
If the vehicle unexpectedly shifts to neutral, there would be an increased risk of a crash.
Remedy
BMW will notify owners, and dealers will tighten the ground cable, free of charge. The recall began February 6, 2017. Owners may contact BMW customer service at 1-800-525-7417.
Owner complaints
74 complaints3 involved a crash2 injuries
What owners report most
Latest complaints
- Fuel/propulsion system
Vehicle: 2016 BMW X5 xDrive35d VIN: [XXX] My 2016 BMW X5 xDrive35d experienced a failure of the high-pressure fuel pump. The vehicle was inspected and I received a written diagnosis stating: “High pressure fuel pump failed and has contaminated the entire fuel system. Recommend replace all fuel…
Vehicle: 2016 BMW X5 xDrive35d VIN: [XXX] My 2016 BMW X5 xDrive35d experienced a failure of the high-pressure fuel pump. The vehicle was inspected and I received a written diagnosis stating: “High pressure fuel pump failed and has contaminated the entire fuel system. Recommend replace all fuel system components.” I am concerned that this failure may be related to the same or a similar defect addressed by NHTSA Safety Recall XXX. That recall included certain 2014–2018 BMW X5 xDrive35d vehicles and concerned failure of the high-pressure fuel pump. BMW's recall documentation submitted to NHTSA states that increased wear of pump components could result in metallic shavings within the pump housing, abnormal fuel-rail pressure, and, in some circumstances, pump shutdown and loss of vehicle propulsion. My repair facility advised me that the contamination in my vehicle's fuel system involves metal associated with the failed high-pressure fuel pump, rather than contaminated/bad fuel. I contacted BMW of North America regarding the failure. BMW informed me that my VIN is not included in the applicable HPFP recall. I also requested assistance because BMW previously issued extended warranty coverage for the high-pressure fuel pump and my vehicle is only approximately two months beyond the applicable time period. BMW declined to provide warranty/goodwill coverage. My primary concern in submitting this complaint is not the warranty decision itself, but that my vehicle appears to have experienced a high-pressure fuel-pump failure similar to the failure described in an existing safety recall involving the same model, engine and component, despite my VIN apparently not being included in that recall population. I am requesting that NHTSA document and evaluate this failure to determine whether vehicles outside the existing Recall [XXX] population may be experiencing the same or a similar high-pressure fuel-pump defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine · Fuel/propulsion system
I am reporting a suspected high-pressure fuel pump safety defect involving my 2016 BMW X5 xDrive35d, VIN [XXX], with approximately 103,186 miles. The check engine light illuminated and BMW Fort Walton diagnosed failed fuel injectors and recommended injector replacement. I subsequently had the…
I am reporting a suspected high-pressure fuel pump safety defect involving my 2016 BMW X5 xDrive35d, VIN [XXX], with approximately 103,186 miles. The check engine light illuminated and BMW Fort Walton diagnosed failed fuel injectors and recommended injector replacement. I subsequently had the vehicle inspected by Techmaster in Fort Walton, Florida, where metallic shavings and debris were discovered within the high-pressure fuel system. After notifying BMW Fort Walton of these findings, I was advised that my VIN is not included in NHTSA Recall 21V-586: High Pressure Fuel Pump. I am concerned because the metallic contamination found in my vehicle appears similar or identical to the high-pressure fuel pump failure conditions addressed by Recall 21V-586. The contamination may also have caused consequential damage to the fuel injectors and other associated fuel-system components. I respectfully request that NHTSA review whether my vehicle, and potentially other BMW X5 xDrive35d vehicles currently excluded from Recall 21V-586, may be experiencing the same or substantially similar high-pressure fuel pump defect. Replacing only the failed injectors without identifying and correcting the source of metallic contamination could leave debris in the fuel system and potentially result in additional fuel-system failure. BMW Fort Walton has advised me that my VIN is outside the current recall population. I am requesting that this case be reviewed as a potential safety defect and possible issue with the scope of the existing recall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system
The High-Pressure Fuel Pump (HPFP) on my vehicle has experienced a catastrophic premature failure for the second time, presenting a severe and immediate safety hazard. This vehicle was previously serviced under NHTSA Recall 21V-586 in 2022 at 66,165 miles, during which the original defective fuel…
The High-Pressure Fuel Pump (HPFP) on my vehicle has experienced a catastrophic premature failure for the second time, presenting a severe and immediate safety hazard. This vehicle was previously serviced under NHTSA Recall 21V-586 in 2022 at 66,165 miles, during which the original defective fuel pump was replaced by an authorized BMW dealership. At approximately 123,000 miles, the replacement pump failed while the vehicle was in operation. When these high-pressure fuel pumps fail, they cause sudden engine stalling, a complete loss of propulsion while driving, and a loss of power-assist for steering and braking. This creates an immediate risk of a high-speed collision on public roadways, especially during highway transit. Furthermore, failure of this component can lead to internal mechanical destruction, creating a potential fuel leak or fire hazard. Because a replacement part mandated by a federal safety recall has failed in the exact same manner after limited mileage, the remedy provided under Recall 21V-586 is demonstrably inadequate to permanently resolve this safety hazard. BMW is currently refusing to cover the repair because the vehicle is just past the 120,000-mile extended warranty limit, leaving a known, recurring safety defect unaddressed. I am filing this complaint to urge NHTSA to investigate the failure rates of BMW's replacement recall pumps, as the current remedy does not guarantee long-term vehicle safety.
- Power train
2016 BMW X5 xDrive40e. Experiencing intermittent/sudden drivetrain malfunction warnings. Vehicle loses power or enters limp mode while driving. Max eDrive / electric drive becomes disabled even with battery charged. Multiple warning lights appear. Issue appears related to the hybrid system…
2016 BMW X5 xDrive40e. Experiencing intermittent/sudden drivetrain malfunction warnings. Vehicle loses power or enters limp mode while driving. Max eDrive / electric drive becomes disabled even with battery charged. Multiple warning lights appear. Issue appears related to the hybrid system (possible EME, SME, Safety Box, or high-voltage battery faults). This creates a safety risk because power can be lost unexpectedly while moving. Mileage at time of most recent occurrence: 126,500. Problem first noticed 118,000.
- Electrical system · Engine and engine cooling
The contact owns a 2016 BMW X5 PHEV. The vehicle was serviced under NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM), but the failure persisted. The contact stated that a month after the repairs were completed, the coolant connector would stay on and drain the…
The contact owns a 2016 BMW X5 PHEV. The vehicle was serviced under NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM), but the failure persisted. The contact stated that a month after the repairs were completed, the coolant connector would stay on and drain the battery. The contact stated that after the vehicle was turned off at night, the coolant connector overheated and the battery drained. The contact needs to jump-start the battery every day. The vehicle was taken to the dealer, and the dealer refused to repair the vehicle, stating that it was already repaired. The contact stated that the coolant connector damaged the EME (Electrical Machine Electronics). The dealer confirmed that the problem may be EME. The vehicle remained at the dealer unrepaired. The contact stated that the failure is worsening. The manufacturer was not made aware of the failure. The failure mileage was 114,865.
- Unknown or other
Spontaneous sunroof shatter.
- Forward collision avoidance › Automatic emergency braking · Service brakes · Unknown or other
I am having a high voltage system box fault. I am within warranty but the dealership is denying me. My in service date is 6-2016.
- Electrical system · Engine · Fuel/propulsion system
The component that failed appears to be the hybrid propulsion and charging system, including the high-voltage battery management system and/or integrated charging electronics. The vehicle will not accept a charge from any home or public charging source. The high-voltage battery was replaced…
The component that failed appears to be the hybrid propulsion and charging system, including the high-voltage battery management system and/or integrated charging electronics. The vehicle will not accept a charge from any home or public charging source. The high-voltage battery was replaced approximately one year ago; however, the charging failure persists. The vehicle is available for inspection upon request. In addition to the charging failure, the vehicle displayed drivetrain malfunction and start/stop malfunction warnings. While driving on the highway at normal speed, the vehicle lost power and stopped, creating a hazardous situation in active traffic. This sudden loss of propulsion placed my safety and the safety of other drivers at risk, as surrounding vehicles were traveling at highway speeds. Prior to the failure, warning messages appeared intermittently, including charging system faults and start/stop malfunction alerts. These warnings began approximately one year ago around the time the charging issue started. The vehicle was previously serviced and the high-voltage battery was replaced; however, the underlying issue was not corrected. The root cause is UNKNOWN, but the symptoms suggest a failure within the hybrid control system, charging module, DC-DC converter, or related electrical components. The failure has been persistent and unresolved. I am concerned that defects within the hybrid propulsion system may lead to additional sudden loss of power events.
- Electrical system · Engine · Fuel/propulsion system
Subject: Consequential Damage and Failure of Remedy regarding Recall 24V-608 Incident Description: "I am reporting a failure of the manufacturer to provide an effective remedy for Safety Recall 24V-608 (Electric Water Pump) and subsequent consequential damage to the High-Voltage battery system.…
Subject: Consequential Damage and Failure of Remedy regarding Recall 24V-608 Incident Description: "I am reporting a failure of the manufacturer to provide an effective remedy for Safety Recall 24V-608 (Electric Water Pump) and subsequent consequential damage to the High-Voltage battery system. In September 2023, at approximately 78,000 miles, this vehicle exhibited 'Drivetrain Malfunctions' including Fault Code 0x222626 (EME: internal fault - active short circuit requested) and 0x22271C (Overvoltage in intermediate circuit). The BMW dealer (Fields BMW) failed to diagnose the root cause and instructed me to 'keep driving'. Since the release of Recall 24V-608, it is clear these 2023 faults were early indicators of the coolant pump short-circuiting. This persistent electrical instability has now resulted in a permanent failure of Cell Supervision Circuit #3, causing the high-voltage contactors to open and leaving the vehicle disabled. The dealer is currently attempting to charge for diagnostics and battery removal. I am asserting that the lack of a timely remedy for the coolant pump (which was only recently shielded per the recall) caused a power surge that 'fried' the internal battery circuitry. This is a safety issue as the vehicle experienced a sudden loss of propulsion while in motion. I request that NHTSA investigate BMW’s refusal to cover battery failures caused by the electrical interference of the recalled coolant pump."
- Air bags
During a recent auto collision my airbags did not deploy. I swerved to avoid another vehicle entering the intersection from my left, he hit my rear left driver's side quarter panel and I subsequently hit a tree. This was noted by the paramedics first on scene as well as by the firemen and police…
During a recent auto collision my airbags did not deploy. I swerved to avoid another vehicle entering the intersection from my left, he hit my rear left driver's side quarter panel and I subsequently hit a tree. This was noted by the paramedics first on scene as well as by the firemen and police when they arrived. I have notified BMW of North America, USAA insurance (my insurance company), and now you. The vehicle is a total loss and was towed to Leesburg Virginia by roadrunner wrecker service.com
- Air bags · Back over prevention › Warnings · Electrical system
Because of this water intrusion, the following safety systems have malfunctioned or failed: • ABS and DSC (stability control) warnings • Chassis stabilization warning • Frontal collision and pedestrian warning malfunction • Airbag system warning • Loss of audible warning tones • MOST bus…
Because of this water intrusion, the following safety systems have malfunctioned or failed: • ABS and DSC (stability control) warnings • Chassis stabilization warning • Frontal collision and pedestrian warning malfunction • Airbag system warning • Loss of audible warning tones • MOST bus communication failure • Electrical modules intermittently shutting down or throwing codes These failures affect braking, stability control, crash avoidance, and driver alerts, creating a significant safety risk while driving. This is not normal wear or maintenance. Many BMW owners have reported the same issue: clogged or poorly designed sunroof drains that route water directly into areas containing critical electronics. Once water reaches these modules, it causes electrical shorts and safety system failures that require expensive repairs. BMW dealerships typically diagnose this as “water damage,” but the location of the drains and the placement of the electronics indicate a design flaw that allows a simple drain issue to disable major safety systems. I am filing this complaint because the water intrusion should not be able to cause total failure of ABS, DSC, collision warning, and airbag-related systems. This is a safety-related design defect, not wear and tear. I request NHTSA review and investigate BMW sunroof drain failures and their impact on essential vehicle safety functions.
- Engine
I am reporting a safety issue related to the BMW recall 18V-755 affecting the EGR cooler on my 2016 BMW X5 diesel. My vehicle experienced symptoms consistent with a failing EGR cooler, including coolant loss and engine warning lights. Despite this recall being active for my model and VIN, BMW has…
I am reporting a safety issue related to the BMW recall 18V-755 affecting the EGR cooler on my 2016 BMW X5 diesel. My vehicle experienced symptoms consistent with a failing EGR cooler, including coolant loss and engine warning lights. Despite this recall being active for my model and VIN, BMW has denied coverage, stating either that the cooler was already replaced twice or that my vehicle is not eligible—without providing sufficient documentation or explanation. I am concerned that the recall remedy was not properly applied or that faulty replacement parts were used. I am requesting that NHTSA investigate whether BMW is properly honoring recall 18V-755 and ensuring safe, effective remedies are provided to affected customers like myself. I also request investigation into the lack of transparency and failure to document completed recall work. My VIN is [XXX] , and I can provide dealer records, service history, and diagnostic reports upon request. * What component or system failed or malfunctioned, and is it available for inspection upon request? EGR Cooler, it is available for inspection. * How was your safety or the safety of others put at risk? The vehicle is now showing dangerous symptoms consistent with a thermal event risk, which this recall specifically warned about. The EGR cooler is leaking coolant into the intake system, which can mix with soot and lead to engine fires, according to BMW’s own technical documentation. * Has the problem been reproduced or confirmed by a dealer or independent service center? Yes and the cooler has been replaced twice. * Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? It has been inspected at Fremont BMW once, Valley BMW twice. * Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes, low coolant warning, loss of coolant with no leaks. Problem first occurred April 2024 INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION AC
- Engine
1) Crankshaft Sensor MIL Light 2) Drive train malfunction, 3) Start and Stop malfunction, 3) MIL for Catalytic convertor 4) MIL light for Catalytic Convertor & O2 sensor failure. The Vehicle has (97,000 K), and the BMW dealer would not cover the costs. However there's TSB published for this vehicle, yet its not being honored by the dealer who claims that the Emissions warranty expired after 8 years or 80,000 miles.
- Fuel/propulsion system
High pressure fuel pump replaced after the original recall and fail again 45k miles later during driving.
- Fuel system, diesel
The contact owns a 2016 BMW X5. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 21V586000 (Fuel System, Diesel); however, the repair failed to prevent the failure from occurring. The contact stated that on three separate occasions, the same recall failure had occurred.…
The contact owns a 2016 BMW X5. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 21V586000 (Fuel System, Diesel); however, the repair failed to prevent the failure from occurring. The contact stated that on three separate occasions, the same recall failure had occurred. The vehicle was towed to the same local dealer where it was diagnosed with a fuel pump failure due to debris inside the fuel pump. The vehicle was not repaired due to the cost. The manufacturer was made aware of the failure. The failure mileage was approximately 40,239.
- Electrical system · Engine and engine cooling · Power train
The contact owns a 2016 BMW X5. The contact stated that while driving at an undisclosed speed, the transmission unexpectedly downshifted, and the contact discovered an unknown liquid leaking underneath of the vehicle. The check engine warning light was illuminated. The contact received notification…
The contact owns a 2016 BMW X5. The contact stated that while driving at an undisclosed speed, the transmission unexpectedly downshifted, and the contact discovered an unknown liquid leaking underneath of the vehicle. The check engine warning light was illuminated. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling; Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted however, the vehicle was not diagnosed. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 120,000. VIN tool confirms parts not available.
- Electrical system · Engine and engine cooling
The contact owns a 2016 BMW X5. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the…
The contact owns a 2016 BMW X5. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Engine and engine cooling
The contact owns a 2016 BMW X5. The contact stated while attempting to start the vehicle, the check engine warning illuminated. The contact stated that a dealer was contacted, and the contact was informed that the vehicle needed to be diagnosed and the battery needed to be registered. The vehicle…
The contact owns a 2016 BMW X5. The contact stated while attempting to start the vehicle, the check engine warning illuminated. The contact stated that a dealer was contacted, and the contact was informed that the vehicle needed to be diagnosed and the battery needed to be registered. The vehicle was not taken to a dealer to be diagnosed or repaired. The contact stated that the VIN was not included in NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The manufacturer was notified of the failure and opened a case. The failure mileage was 121,000.
- Electrical system · Engine
My water pump recall involves an electrical short circuits, that has disrupted other nearby electrical components, like the temperature sensor. • The water pump short-circuit is causing an oil leak directly that is putting a strain the engine and turbo system. • Additionally, a faulty water pump or…
My water pump recall involves an electrical short circuits, that has disrupted other nearby electrical components, like the temperature sensor. • The water pump short-circuit is causing an oil leak directly that is putting a strain the engine and turbo system. • Additionally, a faulty water pump or sensor allowed unnoticed overheating, further stressing the turbocharger seals and leading to dangerous oil leaks oil continues to leak into the turbo system, damaging my turbocharger, exhaust system, and even the catalytic converter • Temperature Sensor Failure: Overheating can cause catastrophic damage to the engine, including warping the head or blowing a gasket. • Electrical Short Circuit: The recall issue is directly responsible for electrical malfunctions that are masking underlying problems, like overheating.
- Electrical system · Engine and engine cooling
The contact owns a 2016 BMW X5. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the…
The contact owns a 2016 BMW X5. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Electrical system · Engine and engine cooling
The contact owns a 2016 BMW X5. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had…
The contact owns a 2016 BMW X5. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Fuel/propulsion system · Power train
Fuel injectors, transfer case prop shaft
- Fuel system, diesel › Delivery › Fuel pump
The contact owns a 2016 BMW X5. The contact stated while driving at approximately 50 MPH, the vehicle stalled. The message "Drivetrain Failure" was displayed on the instrument panel. The vehicle failed to restart. The vehicle was not drivable and was towed to a dealer where it was diagnosed that…
The contact owns a 2016 BMW X5. The contact stated while driving at approximately 50 MPH, the vehicle stalled. The message "Drivetrain Failure" was displayed on the instrument panel. The vehicle failed to restart. The vehicle was not drivable and was towed to a dealer where it was diagnosed that the high-pressure fuel pump had failed. The contact stated that the fuel system needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 129,000.
- Power train · Suspension
The contact owns a 2016 BMW X5. The contact stated while driving approximately 20 MPH, the vehicle was making an abnormal banging sound. The contact stated that the vehicle was losing motive power. The contact depressed the accelerator pedal and the vehicle failed to respond. The contact pulled…
The contact owns a 2016 BMW X5. The contact stated while driving approximately 20 MPH, the vehicle was making an abnormal banging sound. The contact stated that the vehicle was losing motive power. The contact depressed the accelerator pedal and the vehicle failed to respond. The contact pulled into a parking lot and turned off the vehicle. The contact stated that there was no warning light illuminated. The contact had the vehicle towed to a local dealer who diagnosed and determined that front drive shaft and u-joint had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 75,000.
- Electrical system · Engine · Power train
While running house errands April 26,2024, late in the afternoon around 4:15 pm to 4:30 pm or so estimated BMW X5 suddenly shutdown in the middle of road from a major stop light intersection with no warning signs displayed on the dashboard no display of any indicators on the dashboard just…
While running house errands April 26,2024, late in the afternoon around 4:15 pm to 4:30 pm or so estimated BMW X5 suddenly shutdown in the middle of road from a major stop light intersection with no warning signs displayed on the dashboard no display of any indicators on the dashboard just suddenly shutdown car would not move & could not operate the car : many cars behind us were inconvenienced & some drivers pissed off since I was blocking traffic Called towing services & got the the car finally moved physically to our home address : hazard signal could not be operated due to shutdown off the car Very scary & a major safety concern for me & wife due to this incident on top creating a very stressful situation & scenario for road conditions due to the car incident How can a car suddenly shutdown & not able to operate it w no warnings for any driver ? I was driving the car when this incident took place Please investigate this matter as it’s very concerning from a risk & safety matter
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- High pressure fuel pump failure
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel…
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
- Pedestrian alert sounds
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010892The High-Voltage (HV) Battery AssemblysCell Modules Temperature Sensors (Internal NTC repair kit-specific) limited warranty fordefects in materials or workmanship has been extended to 10 years / 120,000 miles asdetermined from the original in-service/first delivery date.
- 10249439The vehicle demonstrates a power loss and the malfunction indicator lamp (MIL) on. The following fault codes may be stored in the DDE: 24CE00 Hot film air mass meter: Ratio of measured to calculated air mass too high 27F000 Charge air hose monitoring in idle: Charge air hose fallen down 290900 Air system, air to EGR air mass flow plausibility: Measured air mass compared to calculated air mass too high 290A00 Air system, air to EGR air mass flow plausibility: measured air mass compared to calculated air mass too high and high charging pressure control deviation
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10249018At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned. This can be felt (jerking)/ heard via an acoustic acknowledgement (clunk) as seen at the 11 second mark of the video. See attached video V36 01 21.
- 10249017SITUATION Unusual noises occur only when operating the steering column in the axial direction. 1. A one-time thump sound at the start of movement Shortly after the steering column starts moving, retracting, or extending, a one-time thump noise is heard. See attached video V32 03 23 2. Humming noise while steering column extends in the axial direction. The sound is only heard when the steering column is extended, not when the steering column is retracted. When the steering column starts to move in the extended direction, the humming noise can be heard. See attached video V32 04 23
- 10247567Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
- 10245422Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicles equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
- 10245364Diesel fuel injectors: ltd wty extension to 10 years/120,000 miles
- 10244258Second seat row blocking access to third seat row, program seat modules. Visible stitching on first row sport seat. Third seat row backrest Bowden cable routing and length change.
- 10244242Various functions of the camera-based driver assistance systems (ADCAM system) can lead to customer complaints.
- 10244239This situation can result in two customer complaints: 1. Wind noise 2. Excess water entry
- 10242694?The front seat will not calibrate/initialize, and the stored faults cannot be deleted.
- 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
- 10238081Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
- 10238062With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC. The Settlement Benefits are effective and available on and after February 9, 2022. Note: This bulletin is a notice of a Class Action Settlement Service Campaign benefits that are now available.
- 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
- 10230717For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.
- 10230716With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC.
- 10227568According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.
- 10225127The Lane Change Warning (LCW) yellow triangle symbol on either one, or both the exterior side view mirrors does not illuminate to alert the driver when it should.
- 10225126Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
- 10225115Customer is unable to power up or charge accessories through a plug adapter inserted in the front 12-volt power socket plug. Alternatively, it will only operate when constant downward hand pressure is maintained.
- 10225114The front sunroof glass seal has shrunk, creating a gap which can cause wind noise or excess water entry.
- 10225113The passenger's side (right rear) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
- 10225112When returning the 2nd row seat 40% (right) side from Easy-Entry: The seat stops moving before reaching the final home position, a check control message (CCM) appears alerting the customer that the seat back is unlocked. The passenger's side (right rear 40% seat) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
- 10225111When returning the 2nd row seat 60% (left) side from Easy-Entry: The seat stops moving before reaching the final home position, a check control message (CCM) appears alerting the customer that the seat back is unlocked.
- 10225110The driver's side (left rear) of the 60/40 split 2nd row seat may intermittently not fully latch into position on one side (inner rail).
- 10225107Coolant is leaking from under the car which is equipped with the S63 engine. A low coolant warning might also be displayed (CC Message ID166).
- 10224212Driver Assistance reduced checked control message (CCM) appears. All or some of the system functions maybe inoperative. The following fault will be stored: 481CC6.
- 10218412The fuel gauge may indicate the incorrect fuel level (full and reserve).
- 10218384Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
- 10218382A check control message for the restraint system appears. In the Instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: short circuit to negative terminal; 93094F - Knee airbag, front passenger: short circuit to negative terminal.
- 10218318Component specific limited warranty extension for the Exhaust Gas Recirculation Valve.
- 10216793TEC26 Turbo Charger Return
- 10216792Tec25 Wishbone Return
- 10216791Tech24 Snap-in Adapter Return
- 10216758MINI engine oil part number transition and model year 2016 engine oils
- 10216757MINI "Enhanced" dealer self authorized (DSA)K goodwill program
- 10215746Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.
Every BMW X5 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.