2014 BMW X5
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2014 BMW X5. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
8 recalls name the 2014 BMW X5. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2015 6 Series Gran Coupe, 2014 5 Series Gran Turismo, 2014 5 Series Sedan, 2015 6 Series Convertible, 2015 6 Series Coupe, 2014 X5, 2013-2014 X3, 2014-2015 3 Series Sedan, 2014 4 Series Coupe, 2014 4 Series Convertible, 2014 3 Series Gran Turismo, and 2015 4 Series Gran Coupe vehicles. Please see the…
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, increasing the risk of injury or death.
The driver's front air bag will be replaced, free of charge. Owner notification letters were mailed September 6, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014 X3 xDrive28i, X3 xDrive35i, X5 sDrive35i, X5 xDrive35i, and 2015 X4 xDrive35i vehicles. The driver's air bag inflator may explode during deployment, due to a manufacturing defect.
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Dealers will replace the driver's front air bag, free of charge. Owner notification letters were mailed January 19, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler…
A melting intake manifold increases the risk of a fire.
Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR…
The melting intake manifold can increase the risk of a fire.
BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC. (BMW) is recalling certain model year 2015 BMW X3 sDrive28i, X3 xDrive28i, X3 xDrive35i, X3 xDrive28d, X4 xDrive28i and X4 xDrive35i vehicles, and model year 2014-2015 X5 xDrive35i, X5 sDrive35i, X5 xDrive50i, and 2014 X5 xDrive35d vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been…
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
BMW will notify owners, and dealers will replace the driver's front air bag, free of charge. The recall began on November 1, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2015 BMW X5 xDrive 35d Sports Activity Vehicles (SAV) manufactured August 19, 2014, to February 16, 2015, and 2014-2015 BMW X5 xDrive 35i, X5 sDrive 35i, X5 xDrive 50i, Sports Activity Vehicles (SAV) manufactured August 28, 2013, to February 16, 2015. In the affected vehicles, the Head…
Without a secure connection to the inflator, the HPS air bags may have insufficient inflation during a vehicle crash, increasing the risk of injury.
BMW will notify owners, and dealers will replace the Head Protection System, free of charge. The recall began on June 24, 2015. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2014 X5 SAV vehicles manufactured December 12, 2013, through March 10, 2014, and equipped with the Soft Close Automatic (SCA) option. The rear side door lock mechanisms may not have been manufactured to correct tolerances and when the inside door handle is pulled, the previously engaged child…
A disengaged child safety lock would allow the rear seat occupant to pull the door handle twice and open the door while the vehicle is parked or in motion, increasing the risk of injury.
BMW will notify owners, and dealers will inspect the rear side door locks and any affected door locks will be replaced, free of charge. Owners may contact BMW customer service at 1-800-525-7417.
This complaint involves a 3rd catastrophic failure of the High-Pressure Fuel Pump (HPFP) covered under NHTSA Recall 21V-586 (BMW SIB B13 01 21) on a 2014 BMW X5 xDrive35d. SYSTEM / COMPONENT: Bosch CP4 High-Pressure Fuel Pump & Complete Fuel Delivery System. The failing pump components are NOT available for independent inspection as the vehicle is currently at the dealership service center sitting broken down after undergoing evaluation, and previously replaced recalled components were retained and discarded by the dealership. SAFETY RISK: The HPFP fails without warning, causing immediate, complete engine stall/loss of propulsion at speed. 1. 1st Failure (~80k mi): Stopped dead in a residential lane, completely blocking traffic. 2. 2nd Failure (~100k mi): Died in the middle of a major, high-traffic intersection in Norco, CA. Created an active crash hazard with hostile traffic until local law enforcement arrived to block lanes and divert traffic. 3. 3rd Failure (Current): Died suddenly on a highway off-ramp, leaving a young driver stranded alone on the roadside. DEALER CONFIRMATION & INSPECTIONS: The defect has been repeatedly confirmed and repaired by an authorized BMW dealership service center (RO records available). The vehicle is currently sitting at the authorized dealer for this 3rd failure. No insurance or police formal mechanical inspections were conducted, though law enforcement physically responded to control traffic during the 2nd incident. This vehicle demonstrates that BMW's safety recall remedy fails to permanently resolve the underlying defect, leaving an active, recurring safety hazard on public roads.
I purchased my vehicle around Labor Day of 2020. I still own and operate the vehicle. Since I have owned my vehicle, I have repeatedly been told my turbos are leaking oil, etc. I have even had several oil leaks repaired on my car. Fast forward six years, and I am buying 5 quarts of oil every two weeks and topping up the oil in my vehicle every week, at least 2-3 quarts per week. I also have smoke coming out of the tail pipes intermittently. The car also smells like it is burning oil, but there are no visible oil drips on the ground currently. I discovered by research there have been two lawsuits: Isley v. BMW of North America LLC, et al., Case No. [XXX] in the U.S. District Court for the District of New Jersey ([XXX] [XXX]), and Bang v. BMW (Original [XXX]) ([XXX]). I have had repeated documented repairs and I never received a notice for these cases. I need my vehicle repaired and I need BMW to take ownership of this defect. I never received one notice regarding these lawsuits, or I would have had my vehicle repaired. I only have 102,000 miles (currently), so my vehicle should be covered in terms of mileage. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2014 BMW X5. While the contact's daughter was attempting to start the vehicle, the vehicle failed to start. The vehicle was towed to an independent mechanic, who diagnosed the vehicle and determined that the 12-Volt battery and the auxiliary battery needed to be replaced. The vehicle was repaired; however, the contact attempted to start the vehicle, but the vehicle failed to start. The vehicle was towed to an independent mechanic who specialized in foreign-made vehicles. The vehicle was diagnosed, and it was determined that the water pump was constantly running and was draining the 12-Volt battery. The mechanic determined that the water pump needed to be replaced. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not associated with the recall. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 160,000.
I own a 2014 BMW X5 diesel, after the 4 yr warranty expired, my car has had 2 times driveshaft/drivetrain/differential replaced. Valve cover leaking. Chassis stabilization error, suspension/air pump problems, at this moment i have an initialization of driving stabilization error message. Please see what is going on with these expensive cars that after 4 yr warranty give all kind of problems. ThanksTeresa
Product: Diono Monterey 2XT Highback Booster Issue type: Child restraint usability / fit concern There is a significant height usability gap between Diono’s convertible seats and the Monterey 2XT booster. My child is approximately 32”–40” tall and cannot safely use either seat, leaving no appropriate Diono option during this growth range. This presents a real-world safety and usability issue for caregivers attempting to follow manufacturer guidance. I have attempted multiple direct contacts with Diono for clarification or exchange options, but no functional escalation contacts exist. This complaint is submitted to document the usability gap and request manufacturer review and some kind of help in rectifying this clearly safety issue. Thank you for your attention to this matter.
The contact owns a 2014 BMW X5. The contact stated that upon attempting to start the vehicle, the vehicle failed to start. The contact stated that several unknown warning lights were illuminated. The contact stated that after several attempts the vehicle started and driven to a service center where the battery was replaced; however, the contact became aware that the battery was draining abnormally. The vehicle was taken to a local dealer where the vehicle was diagnosed and the contact was informed that the water pump was leaking onto an electrical plug connector, causing the vehicle to short circuit. The contact stated that the water pump was replaced, and a shield was installed over the connector. The vehicle was repaired. The contact referenced NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); as a possible cause for the failure however, the VIN was not included. The manufacturer was notified of the failure. The approximate failure mileage was 101,078.
Due to issues in the engine design the timing chains become loose and get excessive slack. BMW has revised the design multiple times but the corrective action requires complete removal of transmission and engine to replace all timing chain components. Unfortunately my engine has suffered timing chain failure and requires replacement. This leads to engine failure while driving and unsafe conditions.
High Pressure Fuel Pump failed without any sensor notification or prior indication causing the car to suddenly go into safety mode shut down and lose all propulsion while driving at speed. This is a known NHTSA recall issue Part 573 Safety Recall Report 21V-586 specific to 2014 BMW X5 xdrive35d. Attempting to understand WHY this VIN is not included in the recall list especially in light of the fact the resulting catastrophic failure defined is exactly why the recall was supposed to prevent.
The contact owns a 2014 BMW X5. The contact stated while driving 65-70 MPH, there was an abnormal sound coming from the engine. The check engine warning light was illuminated. The contact drove to the residence. The following day, the vehicle was towed to SLM Auto Care LLC - Audi VW BMW Porsche, where it was diagnosed that the N63 engine had failed and needed to be replaced. The mechanic also informed the contact that the N63 engine was known to consume excessive oil. The vehicle was not repaired. The dealer and the manufacturer were notified of the failure. The The failure mileage was approximately 78,000.
Vehicle shutoff at high rate of speed causing me to not have power steering or brakes. This was very frightening and lucky to not cause a major accident. This was due to the High Pressure Fuel Pump failing that has extended warranty but should be a recall as this is very dangerous.
Almost caused a major accident when High Pressure Fuel Pump failed unexpectedly while driving. Good thing my family was not in car when this happened. This is completely unacceptable and should be recalled on this vehicle just like many others of this model. I have included picture of metal shavings in fuel system from high pressure fuel pump failure.
High Pressure fuel pump failure
The contact owns a 2014 BMW X5. The contact stated while driving approximately 15 MPH, the contact discovered that there was water leaking from underneath the vehicle. No warning light was illuminated. The contact researched and was made aware of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not included. The vehicle was towed to a dealer where it was diagnosed that the water pump had leaked onto the battery and the water pump, and the battery needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 159,878.
High pressure fuel pump Failure
2014 BMW x5 xdrive35D equipped with a Bosch Cp4 (HPFP) High Pressure Fuel Pump that is known to implode., cause severe damage to my vehicles fuel system that is costing me thousands in repairs. My year make model and build year all fall under the recall but my vin is not on the recall list. BMW has no answers for me and just says nothing they can do. BOSCH CP4 HPFP failed and released metal shavings throughout all fuel lines, injec BMW had a recall for 12K vehicles but mine was not on the recall list and BMW cannot explain why given that my fuel pump exploded like so many other BOSCH CP4 . I believe BMW knew that these pumps were bad and did not notify all owners that had them in in their car.
Water Pump I went to 2 BMW dealerships, Buffalo and PA, for repair and neither could diagnose and repair. I went to local repair shop and they changed water pump. I would like to be reimbursed for this recalled repair. Please advise.
The contact owns a 2014 BMW X5. The contact stated while driving 10–40 MPH, the vehicle stalled and independently shifted to neutral. The vehicle restarted after a while. The check engine warning light was illuminated. The contact stated that the drivetrain malfunction message was displayed. The contact stated that the failure was related to NHTSA Campaign Number: 21V586000 (Fuel System, Diesel). The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The approximate failure mileage was 77,000.
The high-pressure fuel pump failed/disintegrated and released metal debris into the entire fuel system and most likely into the engine. The car stalled and shut off in the middle of intersection and almost caused a crash. The entire fuel system will need to be replaced due to the intrusion of the metal fragments into the fuel system.
The vehicle has been part of recall #[XXX] related to engine EGR cooler leakage. The EGR cooler is part of emission's control. On this vehicle the egr can leak which causes coolant to get into intake manifold and potentially cause risk of fire. BMW denied to cover the repair on my vehicle reason I am asking for support. Have already called BMW customer service 1800-831-1117 but unfortunately no support was offered. Car have been fixed by replacing the egr with genuine BMW part. Invoice attached. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Driveshaft failed during normal driving conditions on normal road. Dealership said bearing in driveshaft u-joint seized, caused driveshaft to fail. This also lead to the transmission pan falling down. Parts are not available for inspection as repairs have already been made and old parts were not kept. Had to pull over mid drive on the side of the road, potential to be dangerous. Dealership diagnosed issue. Vehicle was only looked at by manufacturer/dealership. There were no warning lights or messages leading up to the incident. Only symptom was severe shaking of the car 20-30 seconds before I pulled over to investigate, and I saw the driveshaft hanging out the bottom of the car.
The diesel X5 randomly shut off and would not start leaving my wife stranded on the highway. This left my wife without power steering or power brakes. It was acting a little weird a day or so before the issue, but only displayed a generic powertrain warning without storing any ECM codes to assist with diagnosis. After the engine died, the engine stored a low fuel pressure code. The Bosch CP4 high pressure fuel pump failed just outside of the warranty period. Initial repair estimates are greater than $10,000 due to the way the high pressure fuel pump fails.
Drive train malfunction came on and veh started to act very different like check engine lights and a lack of power !!! had it sent back to the dealer they switch #4 coil pack to # 5 and the code cleared . Then about 1500 miles later the same thing happen ,so I changed plugs& wires and still the same thing happen again so then I received a P0100 code and P0172 so I changed the pcv and both Mas sensors plus the turbo filters !!!!! still no change ?????
Intake Manifold is melted and leaking same year the EGR was replaced from recall.
The contact owns a 2014 BMW X5. The contact stated while driving approximately 55 MPH, the vehicle started shaking violently and vibrated abnormally. The message "Power Train Malfunction" was displayed. The vehicle was later towed to the local dealer who diagnosed that the high-pressure fuel pump had failed, and metal shavings were discovered inside the fuel system and the engine. The contact was advised that the engine and fuel system needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in NHTSA Campaign Number: 21V586000 (Fuel System, Diesel). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 111,000.
Sometime the rear soft closed door ajar with child safety locks engaged while in motion. Child safety locks used because have small children in the back seats. The children safety are at risk when the door ajar while turning. Had to pull over to re-closed the door because the door ajar warning light and sound is on. The dealership had inspect the issue and said there is a service bulletin on the locks.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.