2015 BMW X5
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2015 BMW X5. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
6 recalls name the 2015 BMW X5. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler…
A melting intake manifold increases the risk of a fire.
Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR…
The melting intake manifold can increase the risk of a fire.
BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC. (BMW) is recalling certain model year 2015 BMW X3 sDrive28i, X3 xDrive28i, X3 xDrive35i, X3 xDrive28d, X4 xDrive28i and X4 xDrive35i vehicles, and model year 2014-2015 X5 xDrive35i, X5 sDrive35i, X5 xDrive50i, and 2014 X5 xDrive35d vehicles. The affected vehicles have a driver's frontal air bag inflator that may have been…
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator housing could separate from the base plate and result in metal striking the vehicle occupants, potentially resulting in serious injury or death.
BMW will notify owners, and dealers will replace the driver's front air bag, free of charge. The recall began on November 1, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2015 BMW X5 xDrive 35d Sports Activity Vehicles (SAV) manufactured August 19, 2014, to February 16, 2015, and 2014-2015 BMW X5 xDrive 35i, X5 sDrive 35i, X5 xDrive 50i, Sports Activity Vehicles (SAV) manufactured August 28, 2013, to February 16, 2015. In the affected vehicles, the Head…
Without a secure connection to the inflator, the HPS air bags may have insufficient inflation during a vehicle crash, increasing the risk of injury.
BMW will notify owners, and dealers will replace the Head Protection System, free of charge. The recall began on June 24, 2015. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2015 X5 vehicles manufactured September 12, 2014,to September 21, 2014 and equipped with the optional rear comfort seat. The left rear seat belt attachment point in the affected vehicles may not have been sufficiently welded.
In the event of a crash, the seat belt attachment could break and fail to restrain a seat occupant, increasing the risk of injury.
BMW will notify owners, and dealers will replace the left rear seat frame, free of charge. The recall began November 2014. Owners may contact BMW customer service at 1-800-525-7417 or CustomerRelations@bmwusa.com.
Odometer Fraud. The contact purchased a 2015 BMW X5. It was discovered that there was a mileage discrepancy after the purchase. The vehicle was a dealer sale. At the time of purchase, the mileage was 130,514. However, the Auto Check Vehicle History report indicated that the mileage was 160,258 when it was last registered with the DMV on 11/26/2024.
The contact owned a 2015 BMW X5. The contact stated that while driving 60 MPH, the contact became aware of sparks outside the driver's and passenger's side of the vehicle. The contact became aware that there were flames coming from under the hood. The contact stated that the fire had started in the engine compartment. The message "Add Coolant" was displayed, and there was an abnormal odor while the vehicle was on fire. The contact immediately exited the vehicle. The Fire Department responded to the scene and extinguished the fire. A fire report was filed. The vehicle was completely burned and was towed to a tow yard, where it was deemed a total loss by the insurance company. The vehicle was previously repaired under NHTSA Campaign Number: 21V907000 (Fuel System, Diesel). Additionally, the EGR cooler and the diesel particulate sensor were replaced under warranty; however, the repairs failed to fix the vehicle. The manufacturer, BMW, was notified of the failure. The failure mileage was approximately 160,000.
Catastrophic Driveshaft U-Joint failure - BMW X5 - Production date? 09.22.2014 Repair was made by BMW Dealership. Noted similar recall on 2011-2014 models. I believe my car was an early 2015 production model and was effected by the same issue. Current mileage on the vehicle is 93,000 miles.
I drive a 2015 BMW X5. While driving on a local street, I heard a severe banging noise underneath the car. I pulled over, and it turned out the front driveshaft had broken, striking the transmission pan and other parts beneath. When I towed the car to the shop the mechanic also found that an AC drain line dripped onto the driveshaft U-joint, causing rust over time, which led to this failure. There were no warning lights prior. If this had happened on the highway, it could have caused far greater damage--potentially to the transmission, transfer case, front differential, or even the engine. This was a serious safety risk, and I urge the NHTSA to investigate this design flaw and consider a recall on affected models before others suffer similar damage.
The HPFP failed and left my child and me dead in the water, stalled in the middle lane of a 50mph street for a half hour, nearly getting hit several times (two other vehicles crashed behind us trying to avoid us). Eventually a Sheriff helped us get the vehicle out of the road and into a nearby parking lot to wait for the tow truck. After we got to the parking lot, the Sheriff got another radio call and left without taking information or referring to a report or report number. This part has an open recall 21V-586, but both the local BMW dealership and BMW NA refuse to repair my vehicle (withou paying $18k), saying my VIN is not a part of the recall, despite my vehicle being the same engine within the production time, and my problem being exactly what was described in the recall. The pump failure has been confirmed by a crank-no-start condition, error code for low fuel rail pressure, and finding metal shavings in the fuel metering valve on the fuel pump. I am seeking assistance to be included in the recall that already exists and am frustrated to have been turned away when my vehicle meets all the criteria listed on the recall document. All of my correspondence with BMW was by telephone, so I do not have emails to attach below.
Oil leaking from the valves cover onto the manifold and could cause a fire. I have replaced the valve cover on 11/03/2022 miles 107698 I pay 1493.21 for the repair. Last week 12/23/2025 the same thing started again. The oil is leaking again on manifold the car is smoking I am afraid to drive the car. I believe I should not be paying again for the same problem.
On 11/26/2025, I was driving on the NJ Parkway, Southbound, in the left lane. The Drivetrain Malfunctioned Warning Light came on and within second my car began loosing power. I did not notice any smells. My car stalled as I stopped along the left side of the roadway. I did not have time to maneuver safely to the right, onto the shoulder of the roadway. I maneuvered my vehicle to the left side of the road. My car was pinned against the guardrail to avoid being struck by southbound vehicles. The warning light disappeared. I attempted to restart my car, it sputtered a few time with black smoke coming out of the exhaust. I called 911 and State Police Responded to protect my vehicle from being struck. About an hour later, a tow truck responded and my vehicle was towed to the BMW Dealership, 500 Route 37, Eaton Town, NJ. I believe this catastrophic failure is connected to my vehicles EGR’s system. I had my vehicle serviced at Sterling BMW, Sterling, VA, in early 2025. During that visit I was told that my vehicle’s Auxiliary EGR cooler needed to be replaced. In October 2025, I took my vehicle to BMW of Westbrook, Maine, after I received a notice from BMW that they had extended the warranty on my Auxiliary EGR Cooler and it could be replaced if needed. I provided the Dealership with the information that Sterling BMW provided me about the need to have my Auxiliary EGR cooler replaced. Westbrook BMW examined my car and said there was nothing wrong the my Auxiliary EGR cooler. My vehicle will be looked at tomorrow by Eaton Town BMW. I suspect, I will be told the failure will be related to the EGR system.
My high pressure fuel pump failed. There is a recall affecting these [XXX] ) but apparently my car even though its the same year and model, did not 'qualify'. Its exactly whats listed in the recall and its having exactly the same fault. Im facing an extremely high repair bill because its not a part of the recall.....for whatever reason INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2015 BMW X5. The contact stated that while driving at various speeds, the check engine warning light illuminated. The vehicle was taken to a local dealer to be diagnosed, and it was determined that the EGR module and cooler were malfunctioning and needed to be replaced. The contact was made aware of NHTSA Campaign Number: 18V755000 (Engine and Engine Cooling); however, the VIN was not included in the recall. The vehicle was not repaired. The contact notified the manufacturer of the failure and was referred to the NHTSA Hotline to report the failure. The failure mileage was approximately 108,000.
I was making a left turn in stopped traffic. Lanes 1 and 2 yielded die to bumper to bumper traffic...as I crossed into lane 3 at 5 to 10 mph...struck by a vehicle going 55 mph plus in opposite direction. My vehicle spun into 3rd vehicle. I hit my head 2 times on driver windows. No airbags deployed. I suffered a traumatic brain injury.
The contact owns a 2015 BMW X5. The contact stated that the water pump remained running while the vehicle was turned off, causing the battery to drain. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic where the vehicle was diagnosed and the contact was informed that the thermostat, hoses, and water pump were faulty and needed to be replaced. The vehicle was repaired; however, the failure persisted with the water pump continuously running while the vehicle was turned off. The contact referenced NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM) as a possible cause for the failure. The manufacturer was notified of the failure. The approximate failure mileage was 95,000.
one seat belt in the BACK SEAT on PASSENGER SIDE SEAT BELT WILL NOT PULL out . stay stuck . can pull out to 1.5 inches then somtimes "3. then back to "1.5
The contact owns a 2015 BMW X5. The contact stated that the vehicle was experiencing battery drainage. The vehicle was taken to the dealer, where the battery was replaced twice; however, the failure persisted. The dealer informed the contact that the auxiliary water pump was continuously running after turning off the vehicle. The dealer diagnosed the vehicle with parasitic battery draw due to the auxiliary water pump malfunction. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 123,000.
My 2015 X5 decided it was not going to start. The vehicle was was looked at by a technician only to determine thay the cam sensor was not active and the car would not start. Moving forward with diagnostics the sensor was ruled out as good. Moving forward the valve cover was taken off for inspection only to find that the cam side bolt was hanging only by the wall of the valve cover. the gear is still in place it has nkt jumping timing but the end of the cam bolt is and has been broken off at the end inside the man approximately a half inch of the end of the bolt is in the hole. I stopped the technician from moving forward with anything else. I recently looked up for a recall but do not see any for the X5 but open recalls on other models. please let me know if this is a problem with the six cylinder turbo and it under sized cam bolt thank you for your help and time.
The contact owns a 2015 BMW X5. The contact stated that while driving approximately 45 MPH, the vehicle began to lose automotive power and reduced speeds and smoke was present coming from the engine compartment. The vehicle was driven to the home and while parked in the garage the temperature gauge indicated that the engine temperature was extremely hot. The vehicle was later towed to the local dealer who diagnosed that the coolant pump and coolant pump connector was faulty and needed to be replaced. The vehicle was repaired and the failure was remedied. The manufacturer was not contacted. The failure mileage was 151,000.
The contact owns a 2015 BMW X5. The contact stated that while driving at approximately 40 MPH, the contact observed smoke emanating from the rear of the vehicle. The vehicle was steered to the side of the road where he observed fire emanating from the engine compartment. The fire was extinguished by hand and the contact sustained hand injuries. Medical attention was not needed. The vehicle was towed to a dealer where it was diagnosed that an EGR failure where coolant leaked and combined with diesel soot causing a fire. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was approximately 103,000.
Check engine light: FC 24BF00 - zero-quantity adaptation injector cylinder 2: permitted filtered actuation duration correction too high These are the same issues the 2016 MY cars experience and was given a warranty extension
The contact owns a 2015 BMW X5. The contact stated that while driving at various speeds, the Automatic Emergency Braking system failed to engage as needed while there were other vehicles nearby. There was no warning light illuminated. The vehicle was taken to the dealer to be diagnosed. Additionally, the manufacturer was contacted, and the contact was provided a 2025 BMW X5 loaner vehicle; however, the contact stated that the same failure occurred while driving the loaner vehicle. The manufacturer was notified of the failure and advised the contact to return the loaner vehicle to the dealer. The contact stated that upon returning the loaner vehicle to the dealer, the dealer informed the contact that the failure of his vehicle could not be duplicated. The contact stated that while driving the vehicle at various speeds, the failure persisted. The vehicle was taken back to the dealer, where it was test-driven while the dealer's manager was occupying the front passenger's seat. The dealer confirmed that the Automatic Emergency Braking system was inoperable; however, the dealer informed the contact that they did not know how to repair the vehicle. The vehicle was not repaired. The manufacturer was contacted and informed the contact that they would contact the dealer to obtain information on the service that was performed on the vehicle. A case was opened; however, the contact was still awaiting a response from both the dealer and the manufacturer. The failure mileage was approximately 56,000.
My prop shaft has prematurely failed due to the air conditioner drain line outlet directing water on to the prop shaft u joints. This is a recall issue on previous model BMW X5 and obviously a continuing issue on this generation (f15) as well.
The contact owns a 2015 BMW X5. While the contact's father was driving at an undisclosed speed, the drive train error warning light illuminated. The vehicle was taken to the dealer where it was diagnosed with fuel pump failure. The contact was informed that the fuel pump needed to be replaced. The vehicle was repaired. The contact stated that two days later, the failure reoccurred. The contact stated that while the contact's father was driving at an undisclosed speed, the drive train warning light illuminated, and the vehicle lost motive power. The contact stated that the gear shifter failed to function as intended, the gear shifter did not shift to neutral or drive. The vehicle was towed to the dealer where it was diagnosed with a failed fuel system. The contact was informed that the complete fuel system needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact was informed that the VIN was not associated with any unknown recall repairs; however, the contact was informed that the VIN was associated with warranty coverage for the fuel pump only. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 188,000.
Front drive shaft came apart at highway speed-70mph, tearing up oil pan transmission cooler.
The contact owns a 2015 BMW X5. The contact stated that while driving at various speeds, a low coolant message was displayed on the instrument panel. The vehicle was initially taken to an independent mechanic where the water pump was replaced; however, the failure persisted. The vehicle was then taken to a dealer where it was recommended that the head gasket be replaced; however, the dealer could not guarantee that the repair would fix the vehicle. The vehicle was taken back to the independent mechanic where another diagnostic test was performed. The mechanic discovered a coolant leak inside the EGR module and linked the failure to NHTSA Campaign Number: 21V907000 (Fuel System, Diesel). The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 115,000.
Vehicle stalled in the middle of the road when in drive mode displaying "Drivetrain Malfunction". Couldn't start the engine or shift the gear. Vehicle was at the dealership one week before the incident for 'Drivetrain Malfunction'. Fixed bad fuel injector and was tested. My safety and safety of others was at risk if it had happened at higher speed. Suspecting fuel pump failure. Vehicle is with the dealer and the component should be available for inspection.
When I research by your making model, it shows that there are multiple safety recalls for my vehicle. However, when I put in my license plate urban number, it says that there is zero, because I believe that that is some sort of redacted information that’s not true because my vehicle continues to have concerning safety issues and engine issues and the manufacture is refusing to repair. Also, there are suspension issues and under body, rest, and emissions issues that my state Ohio does not test I purchase this vehicle from Carvana and I believe they shipped the vehicle to a state that does not require a mission passing, because that would have been a flag for my vehicle, and it was very difficult for me to register my vehicle and my state due to a clouded title but it’s very hard for me to get information from dealerships because they don’t want to perform the work at cost as a service customer service, and then the seller, of course is hiding this information I need oversight, or some sort of enforcement how I can take my vehicle somewhere and have it inspected for safety, and then enforce the recalls and enforce the warranties that are on them because as I mentioned, I am not I’m getting out Bro blocked and I don’t wanna take accountability and responsibility. I did have a stop at a muffler shop and they said that my underbody is is the scripture is not installed properly, and there are things that are detach to avoid the emissions smoke and those are hidden from the seller I am a nervous Buyer. This is my first time having a vehicle such as this and I believe I have a lemonade and sweet lemon. How can I get it? Inspected it inspected.
The contact owns a 2015 BMW X5. The contact stated while driving approximately 45 MPH, the check engine warning light illuminated. The contact stated used a scanner to diagnose the vehicle and determined that injectors #1 and #5 needed to be replaced. The vehicle was taken to a local deal where all 6- injectors were replaced; however, the failure had reoccurred. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 68,000.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021, to investigate incidents alleging a stall/loss of motive power as a result of high-pressure fuel pump failures in certain model year (MY) 2019-2020 Ram 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. During the investigation, ODI sought to determine if the related defect allegation was limited in scope to the recalled population. After review of information request response materials from both FCA and BMW, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA and BMW.During the investigation FCA filed recalls 22V406, 22E048, 22V767, and 22E087 which include vehicles not identified in the initial subject population by ODI. ODI also received recall 21V586, involving loss of motive power due to failed CP4 fuel pumps on certain BMW manufactured vehicles. An information request letter response received from BMW indicated that failed pumps on their vehicles were caused by an interaction between pump internal components and US market diesel fuel, leading to increased slip and eventual particle-generating wear surface. Additional work will be done to identify whether a similar root cause is associated with the FCA recalled population and if similar wear dynamics occur on pumps supplied to vehicle manufacturers other than those included in the recalled population.ODI has upgraded this investigation to an EA in order to 1) determine engineering specifications of internal pump components that are correlated with pump failure leading to loss of motive power or other safety related hazards, 2) identify vehicle populations equipped with alleged defective pump variants, 3) assess if vehicles equipped with alleged defective pump variants result in an unreasonable risk to motor vehicle safety and 4) gather and review any other relevant information related to high pressure fuel pump failure associated with the subject populations of recalls 21V586, 21V880, 21E094, 22V406, 22E048, 22V767, and 22E087.Review of the above information will allow NHTSA to confirm root cause and recall remedy viability, and identify and evaluate vehicle populations equipped with pump components that may pose an unreasonable risk to motor vehicle safety.The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11257550, 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11377871, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11446542, 11448163, 11453556, 11458918, 11460558, 11469337
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.