These records cover every 2021 Ford E-250. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
11008373In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Reason for supplement: software now available/additonal technician information
11006040Certain 2021-2022 Model Year Econoline Vehicles Equipped with Dual Rear Wheels Hydroboost or Hydromax Power Steering Pressure and Jumper Line Replacement Affected vehicles were inspected and passed inspection for inadequate connection of the Hydroboost power steering pressure and jumper lines in safety recall 22S08, before January 29, 2023. This program provides coverage to the Hydroboost power steering pressure and jumper lines should they require replacement due to inadequate connection to the brake Hydroboost unit.
10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
10252410Customer Satisfaction Program 22N15 Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Adding Not OTA Capable Owner letters. Other documents submitted 01/02/24 & Received OTA letters submitted on 02/01/24
10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
10249489Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Addinf owner letters. First part submitted 01/02/24
10248277This article supersedes TSB 23-2258 to update the Parts List, TSB Issue, and Service Procedure. Some 2021-2023 E-Series vehicles may exhibit a lack of air flow due to an inoperative heating, ventilation, and air conditioning (HVAC) blower motor. This may be due to a damaged fuse F2 (50A) in the battery junction box (BJB). To correct the condition, replace the BJB, pigtail connector, and replace fuse F2 in the new BJB with the listed service replacement part.
10248066Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing
10241949Certain 2021-2022 Model Year Econoline, Super Duty Chassis Cab, F53 Motor Home, F59 Step Van, and F650/F750 Medium Duty Chassis Cab Vehicles Equipped with a Premium Rated 7.3L Engine - Engine Horsepower Credit
10241529Some 2021-2023 E-Series vehicles may exhibit a lack of air flow due to an inoperative heating, ventilation, and air conditioning (HVAC) blower motor. This may be due to a damaged fuse F2 (50A) in the battery junction box (BJB). To correct the condition, replace the BJB and replace fuse F2 in the new BJB with the listed service replacement part.
10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
10237971Some 2021-2023 F-Super Duty/E-Series vehicles equipped with a 6.2L, 6.8L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 and/or P0455 stored in the powertrain control module (PCM). This may be due to a improper fuel filler cap installation and/or outside contamination on the fuel cap sealing surface. The fuel filler cap requires multiple turns to seal properly and should be clean of any debris on sealing surface. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. If the DTCs return after the fuel filler cap is cleared of debris and properly seated, refer to Workshop Manual (WSM), Section 303-13 > pinpoint test HX.
10228871Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit an intermittent no crank/no start condition and/or an intermittent blank instrument panel cluster (IPC)/SYNC touchscreen. This may be due to the software in the gateway module (GWM). To correct the condition, reprogram the GWM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14F642 and the applicable labor operations of Section 10 of the Service Labor Time Standards (SLTS) Manual.
10226767Some 2020-2022 F53 Motorhome built on or before 06-Oct-2022 and 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service AdvanceTrac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperative. To correct the condition, reprogram the ABS module using the latest software level of the Integrated Diagnostic System (IDS). For claiming, use causal part number 2C219 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
10222255Some 2020-2022 F53 Motorhome built on or before 06-Oct-2022 and 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service AdvanceTrac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperative. To correct the condition, reprogram the ABS module using the latest software level of the Integrated Diagnostic System (IDS). For claiming, use causal part number 2C219 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
10216963Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit a communication fault with emissions inspection equipment. This may be due to the software in the gateway module (GWM). To correct this condition, reprogram the GWM to latest software level using the appropriate Ford diagnostic scan tool. Use causal part 14F642 and applicable labor times from Section 10 of the Service Labor Time Standards (SLTS) Manual.
10216961Some 2021-2022 F-Super Duty and 2021-2023 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design has changed, requiring multiple turns to seal properly. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. For further diagnostics, refer to Workshop Manual (WSM), Section 303-13 - pinpoint test HX.
10212957Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
10210850Some 2021 and 2022 Ford and Lincoln vehicles may experience a tire sidewall wavy/indentation appearance in the radial direction on one or both sidewalls. Sidewall wavy/indentation appearance is a common cosmetic characteristic of radial tire construction and will not affect the performance of the tire.
10194412Some 2021 F-Super Duty and 2021-2022 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design has changed, requiring multiple turns to seal properly. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
10194388Some 2021 F-Super Duty/F-650/F-750 and 2021-2022 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design changed for 2021 to require three full turns to properly tighten. Advise the customer of the design change. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
10189583Some 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service Advance Trac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperable. To correct the condition, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part number 2C215 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
10186623Some 2021 E-Series/F-Super Duty/F-650/F-750 vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design changed for 2021 to require one full turn to properly tighten. Advise the customer of the design change. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
10183393Some 2021 E-Series chassis vehicles may exhibit a Service Advance Trac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperable. If this concern is still present after normal diagnosis, clear the DTC with the appropriate Ford diagnostic scan tool and schedule a follow-up appointment for service in March 2021. Inform the customer that engineering is working to implement a solution for this condition and advise the customer that they can continue to drive the vehicle. This condition does not create drivability concerns and has no effect on long-term durability. Once the solution becomes available, contact the customer and confirm a service appointment. Monitor OASIS for updates.
10180352Some 2021 E-Series/F-650/F-750 vehicles may exhibit inoperative RKE key fobs resulting in key fob replacement or some customers may seek service to program additional key fobs to the vehicle. A new IDS procedure has been released with IDS version 119.01 to allow for RKE key fob programming. Start a vehicle session and click on the Toolbox Tab. Click on Body > Security > Remote Keyless Entry to begin programming new and/or additional key fobs. Only 4 RKE key fobs total can be programmed to each vehicle. All vehicles are equipped with a wired in connectivity device. If the customer elects to program this connectivity device it will take up 1 of the 4 available slots. The Workshop Manual procedure for RKE programming is also being updated.
10177887Some 2021 E-Series/F-650/F-750 vehicles may exhibit inoperative RKE key fobs or some customers may seek service to program additional key fobs to the vehicle. Inform customers that Ford is developing an IDS procedure that is expected late August 2020, which will restore RKE function and allow for programming additional RKE key fobs. The Workshop Manual procedure for RKE programming is also being updated. Because these vehicles have a new generation body control module (BCM), replacement of the BCM is no longer the recommended repair procedure. Advise the customer they can continue to drive the vehicle and schedule a follow-up appointment for service in late August. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
101770342020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-01. Do not submit a claim for this condition.
Every Ford E-250 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.