2019 Freightliner Cascadia
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Freightliner › Cascadia › 2019
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2019 Freightliner Cascadia. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
29 recalls name the 2019 Freightliner Cascadia. Newest first.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2022 Freightliner 114SD vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to the affected side during braking initiated by Electronic Stability Control…
Brakes that pull to one side may cause a sudden change in vehicle direction, increasing the risk of a crash.
Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 13, 2023. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL966.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2023 Freightliner Cascadia, 2020-2022 Freightliner Business Class M2, and 2022 Freightliner 114SD, and 2020-2023 Western Star 49X, 2021-2023 Western Star 47X, and 2021-2022 Western Star 57X vehicles. The brake modulator valves on the front axle may corrode and cause the vehicle to pull to…
Brakes that pull to one side during an ACC braking event may cause a sudden change in vehicle direction, increasing the risk of a crash.
Dealers will inspect and replace the front brake modulator valves, as necessary. Some vehicles will have a software update which will alert driver when a replacement is required. All repairs will be performed free of charge. Owner notification letters were mailed beginning October 16, 2023. DTNA's number for this recall is FL-958. This recall expands and replaces previous recall 20V-390. All vehicles previously repaired under recall 20V-390 will need to have the new remedy performed.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Cascadia P4 vehicles. The brake lights may remain illuminated after the brake pedal has been released.
If the brake lights remain illuminated, drivers may be unaware when the truck is actually slowing or stopping, increasing the risk of a crash.
DTNA will notify owners, and dealers will replace the 3-pin brake pressure switch with a 2-pin brake pressure switch along with a jumper harness, free of charge. DTNA issued owners an interim notification on November 17, 2020. Owner notification letters were mailed on November 21, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-863.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Classic Cascadia and 2019-2021 Freightliner Cascadia trucks. The drag link taper joint may not have been tightened sufficiently and could come loose, resulting in a complete separation of the drag link from the steering arm.
Drag link separation can cause a complete loss of steering control, increasing the risk of a crash.
DTNA will inspect the drag link taper joint and repair it as necessary, free of charge. Owner notification letters were mailed on October 29, 2021. Owners may contact DTNA's customer service at 1-800-547-0712. DTNA's number for this recall is FL-900.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019-2022 Freightliner Cascadia P4, 2021 Western Star WH126, 2020 Western Star WJ121, and 2021-2022 Western Star 49X vehicles. The battery cable terminal may break, resulting in a loss of electrical power and unintended engine stall.
An engine stall increases the risk of a crash.
Dealers will repair or replace the battery cables, free of charge. Owner notification letters were mailed on January 7, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-893.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2022 Freightliner Cascadia vehicles equipped with halogen headlight assemblies. The halogen headlight bulb may dislodge during replacement and contact other vehicle components, possibly causing them to melt.
Melting components can increase the risk of fire.
Dealers will install a foam grommet, cut a 4-inch access hole into the inner fender, and add a warning label on both fenders, free of charge. Owner notification letters were mailed on July 9, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-887.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia, Business Class M2, 108SD, 114SD and 122SD and Western Star 4700, 4900 and 5700 vehicles. An internal component within the clutch assembly may fail, which in certain circumstances could allow the vehicle to move unexpectedly.
Unintended vehicle movement van increase the risk of a crash.
DTNA will notify owners, and dealers will update the software and replace the clutches, free of charge. DTNA issued owners an interim notification on December 7, 2020. Owner notification letters were mailed on May 28, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-865.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events.
Brakes that pull to one side during automatic braking events may cause a sudden change in vehicle direction, increasing the risk of a crash.
DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-855.
Daimler Trucks North America LLC (DTNA) is recalling certain 2006-2020 Freightliner Columbia, 2006-2021 Freightliner Business Class M2, 2007-2020 Freightliner Coronado, 2014-2021 Freightliner 122 SD, 2007 Sterling A 9500, 2006 Freightliner Argosy, 2006-2007 Sterling AT9500, 2008-2021 Freightliner Cascadia, 2006-2008 Freightliner Classic, 2006-2011…
The vehicle's rearward visibility may be reduced, increasing the risk of a crash.
DTNA will notify owners, and dealers will inspect and reposition the reflective tape to ensure that it is completely visible, as necessary, free of charge. The recall began May 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL848.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Western Star 4700 and 5700, Freightliner Custom Chassis S2, Custom Chassis XB, and Custom Chassis XC vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened.
Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
DTNA will notify owners, and dealers will inspect and repair the vehicles, free of charge. The recall began May 1, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-845.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2020 Freightliner Cascadia vehicles. The ABS Electronic Control Unit (ECU) may not detect an incorrectly functioning solenoid valve for the ABS/ESC module during certain low voltage start conditions, potentially causing the ABS/ESC Malfunction indicator not to illuminate. As such, these…
Without the alert, an operator may not be aware of an active ABS/ESC malfunction and unknowingly operate the vehicle with reduced ABS/ESC function, increasing the risk of a crash.
DTNA will notify owners, and dealers will reprogram the ABS/ESC module, free of charge. The recall began December 2, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-830.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner Cascadia vehicles equipped with a certain 40K Light Weight Extra Duty Airliner suspension and 51 inch axle spacing configuration. The brake airlines may be damaged due to inadequate clearance between the ride height control valve and the brake airlines.
Damage to the brake airlines can cause reduced brake effectiveness, increasing the risk of a crash.
DTNA will notify owners, and dealers will install a new bracket for the height control valve to add additional clearance for the brake airlines, free of charge. The recall began September 16, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-820.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019 Freightliner 108SD, 114SD, Business Class M2, Cascadia, Western Star 5700, and FCCC XC Chassis vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened.
Loose brake caliper mounting bolts may reduce the brake effectiveness, increasing the risk of crash.
DTNA will notify the owners and affected vehicle manufacturers, and DTNA dealers will inspect and repair the vehicles, free of charge. The recall is expected to begin July 12, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-816.
Daimler Trucks North America LLC (DTNA) is recalling certain 2004-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Classic, FL80, FLD 120SD, Business Class M2, Western Star 4700, 4900, 6900, Sterling Acterra, L7500, LT7500, L8500, LT8500, L9500, and LT9500 vehicles. The vehicles may have an insufficient service brake air reservoir capacity. As…
An insufficient air reservoir volume may reduce brake effectiveness, increasing the risk of crash.
DTNA will notify owners, and dealers will add air reservoir capacity to the affected vehicles. Owner letters were mailed on November 29, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-815.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. In the affected vehicles, the Anti-Lock Braking system (ABS) malfunction warning light may not reactivate after the ignition has been turned off and then switched back on. As such, the vehicles fail to comply with Federal Motor Vehicle Safety Standard…
Unknowingly operating a truck with an ABS malfunction may increase the risk of a crash.
DTNA will notify owners, and dealers will reprogram the ABS module, free of charge. The recall began April 26, 2019. Owners may contact DTNA customer service at 1-800-547-0712. The DTNA number for this recall is FL-810.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2020 Freightliner Cascadia vehicles equipped with an optional steering wheel air bag. The driver's frontal air bag may deploy unexpectedly.
If the driver's frontal air bag deploys unexpectedly, it can increase the risk of a crash.
Daimler Trucks North America (DTNA) will notify owners, and dealers will remove the air bag as an the interim remedy, free of charge. DTNA is developing a remedy program, which when available, will be communicated to customers and dealers. DTNA issued owners an interim notification on April 5, 2019. The recall began July 19, 2019. Owners may contact Daimler Trucks customer service at 1-800-547-0712. DTNA's number for this recall is FL806. This recall supersedes recall 18V-787.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Business Class M2, Western Star 4700, 4900, and 5700 vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Unintended vehicle movement can increase the risk of a crash.
DTNA will notify owners, and dealers will update the software, and repair any physical components, free of charge. DTNA issued owners an interim notification on February 16, 2019. The recall began July 31, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-803.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose…
Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Cascadia and Western Star 5700 vehicles. The steering wheel on these vehicles may loosen over time and the steering wheel may detach from the steering column.
If the steering wheel detaches, there would be a loss of vehicle control, increasing the risk of a crash.
DTNA will notify owners, and dealers will correct the steering wheel installation, as necessary, free of charge. The recall began November 21, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL796.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Freightliner Custom Chassis Corporation S2C 106 Cab, S2G Cab Chassis, XCL, XCM, XBS, XCP, XCR, Western Star 4700, 4900 and 5700 trucks. The brake caliper mounting bolts may have been insufficiently tightened.
Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began December 3, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-794.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia, Coronado and 122SD, and Western Star 4900 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Dealers will replace the affected nylon fuel line with a steel fuel line, free of charge. The recall began November 21, 2018. Owners may contact DTNA customer service at 1-800-547-0712 or Cummins customer service at 1-800-286-6467. DTNA's number for this recall is FL789.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, 122SD, Cascadia, Columbia, Coronado, and Business Class M2 vehicles. During manufacturing, the brake caliper mounting bolts may have been insufficiently tightened.
Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began October 5, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-783.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. Over time, the pitman arms may crack and fracture.
If the pitman arm fractures there would be a loss of steering control, increasing the risk of a crash.
DTNA will notify owners, and dealers will replace the pitman arms, free of charge. The recall is expected to begin October 6, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-784.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Cascadia trucks. The Instrument Cluster Unit (ICU) may not perform the required bulb checks for the Anti-lock Brake System (ABS) or Electronic Stability Control (ESC) if the ignition is turned from on to off to on too quickly. As such, these vehicles fail to comply with…
Without an ABS or ESC bulb check, the operator may unaware that the warning light bulbs are not working. If the warning bulbs are not working, in the event of an ABS or ESC malfunction, the driver may not be notified, increasing the risk of a crash.
DTNA will notify owners, and dealers will reprogram the ICU's to ensure a bulb check is performed each time the ignition is turned on, free of charge. Also, the sub-population with Tire Pressure Monitoring (TMPS) will also require replacement parts, free of charge. DTNA issued owners an interim notification on September 18, 2018. The recall began March 5, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-780.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2019 Freightliner Cascadia trucks, equipped with certain Continental Coach HA3 tires, size 315/80R22.5 157/154 L. The cords on these tires may be visible through the innerliner.
Tires that have cords visible through the innerliner can have sudden air loss, causing a loss of vehicle control, increasing the risk of a crash.
DTNA will notify owners, and Continental authorized service facilities will inspect and replace the tires, free of charge. The recall began on September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or Continental customer service at 1-888-799-2168. DTNA's number for this recall is FL-778.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019 Freightliner Cascadia vehicles, equipped with certain Continental Hybrid HS3 tires, size 11R22.5 Load Range G. The tire cords may be visible through the innerliner.
Tires with visible cords through the innerliner may have a sudden loss of air, increasing the risk of a crash.
DTNA will notify owners, and Continental authorized service facilities will inspect and replace the tires, free of charge. The recall began on September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or Continental customer service at 1-888-799-2168. DTNA's number for this recall is FL-779.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. The brake caliper mounting bolts on these vehicles may not been properly tightened, potentially resulting in the caliper detaching.
If the calipers detach, there would be reduced braking performance, increasing the risk of a crash.
DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts, tightening them as necessary, free of charge. The recall began on August 13, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-775.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently…
If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.
DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Cascadia vehicles. The fasteners that secure the driver's air bag module within the steering wheel may not have been installed to specification, possibly affecting the frontal air bag deployment in the event of a crash.
An incorrectly installed air bag may not function correctly in a crash, increasing the risk of injury.
DTNA will notify owners, and dealers will inspect the frontal air bag fasteners, tightening them to the proper specification, free of charge. The recall began on July 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-771.
I am purchasing this vehicle from a fleet sales in Pa and the left cab shock and 4 rear shock absorbers on the rear suspension I believe are severely compromised and I'm being told that they are unsure if these items are listed under DOT inspection and I am asking to have them replaced upon my purchasing of the vehicle. Will these severely rusted and damaged components passed a federal DOT inspection? I also see that they failed to have the recall repaired. Schneider Truck Sales in Harrisburg, PA is whom I am trying to purchase this vehicle from and I expressed to them that I believe these items should be replaced and repaired.
I am writing to bring to your attention a potentially dangerous situation caused by what I believe to be a manufacturer design flaw with the SS 1034797 M2, 108SD, 114SD Coolant Level Sensor P/N 06-93316-002. On [XXX], one of our trucks (VIN: [XXX]) experienced a low coolant warning and an automatic engine shutdown while traveling on the interstate in a construction zone. As you can imagine, the sudden stoppage of a tractor-trailer in the traffic lanes of a freeway presents an extremely hazardous situation, not only for our driver but for all motorists in the vicinity. For us as a motor carrier, this is compounded by the likelihood of legal liability resulting from any collision involving a stationary truck in such conditions. The root cause of this incident appears to be the failure of the magnet within the surge tank to maintain its buoyancy. When the magnet sinks to the bottom of the tank, it signals the engine control module (ECM) that the coolant level is critically low, triggering an engine shutdown. While I understand the intent is to protect the engine from potential damage, this design flaw creates an unacceptably dangerous scenario—especially since, in many cases, the engine is not actually at risk of damage. In this instance, I instructed the driver to unplug and after a 15-minute period, he restarted the truck and drove to a nearby truck stop. Remarkably, the truck remains operational without the sensor repair, further underscoring the superficial nature of this issue. Unfortunately, this is not an isolated incident. We have encountered similar sensor failures across our fleet, but this particular event was the most severe. While I am not an engineer, it seems logical that the coolant level sensor should be paired with a high-temperature reading before an engine shutdown is initiated. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
While approaching an overpass the collision mitigation system activated my brakes nearly causing the vehicle behind me to rear end my trailer, hit my brakes so hard i was thrown forward.
My 2019 Freightliner Cascadia forward collision brakes activates automatically while on the road without any other vehicle nearby, airbrake malfunction (not released appropriately and fully released) and extremely fuel consumption.
Truck will apply brakes when no objects or vehicles are around. It is very scary and unexpected when the system does this.
The contact owns a 2019 Freightliner Cascadia. The contact stated that while driving at various speeds, the Forward Collision Avoidance feature engaged inadvertently. Recently, the contact stated that while driving at 45 MPH, the brake assist system engaged after a plastic bag flew by the vehicle. The Forward Collision Avoidance alarm sounded during the failure. The contact called the local dealer and was informed that the feature could not be deactivated. The manufacturer was also notified of the failure, but no assistance was provided. The failure mileage was approximately 254,180.
The contact owns a 2019 Freightliner Cascadia. The contact stated that while driving approximately 60–70 MPH, the brake assist system engaged without an object nearby. While depressing the brake pedal, the system released and reset. The Forward Collision Avoidance alarm sounded. The contact called the local dealer and was referred to the manufacturer. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 200,674.
My truck just came to a screeching halt on the interstate with no obstacles in front of it. It nearly caused a major accident. I could not override it. I was approaching an overpass approximately 100 yards away. Collision warning lights went on. Horn started beeping and brakes engaged immediately.
This complaint comes from a private truck fleet operating over 700 trucks experiencing excessive amounts of false positive emergency braking and/or haptic following distance warnings (brake stab) on 2018-2020 Freightliner Classis Cascadia tractors. The system experiencing the highest incidents are equipped with the Wabco OnGuard Collision Mitigation System. Some of these false positives have resulted in neck and shoulder injuries. False positives occur while approaching bridge overpasses and other road objects such as steel plates or overhead signs. Wabco has been contacted and state the system is discontinued and outdated so no support or fixes is offered other than a single software upgrade. All units have received the software update but still experience false positives. These unexpected false positive occurrences have resulted in injuries, potential loss of control, and accident risks to other motorists. Although false positives have occurred and continue to occur since first receiving trucks with this technology in 2018, the first injury occurred on 3/3/2022. The system should be recalled to provide a solution to the excessive false positives.
This Truck that I'm buying from USCryo Carriers that is a Freightliner has been in the shop numerous times for electrical issues and lighting issues and body and tires problems and they have yet to fix them and get them properly repaired and the Truck is shocking me while driving and whenever laying in the bunkso much it hurts and causes headaches I pay insurance and for the truck, but my company is steady making me pay all repairs even though I have insurance
Engine caught fire on drivers side.
Cruise control will shut off and then engage again on its own. It will have a hard time to disengage at times. Lane departure goes off when there is nothing there. The collision warning system goes off a lot. Locked up the brakes in the rain causing a slide. Locked up on ice almost causing a jackknife. Then this summer it has locked up when nothing is around. Came to a complete stop, then not releasing the brakes for a few seconds. Luckily, no one was around. It has been in for repair several times. It is in the shop now. I lease this vehicle from Penske. They refuse to give me a safe truck.
Reference no, 11354207. I called the US department of transportation on September 10, 2022 to report the braking failure on my truck that cost my driver his life. I've since called them a couple of times, but have not heard back from them. There have been multiple other reports where the same brake failure occurred, but there has not been any other follow up.
ABS AND TRACTION control failed. Because of this, the $ 7,000 automatic collision avoidance system is not working. 300.000 miles on 2019 truck is just ridiculous.
:steering. Yes :was unable to steer properly into a curve in road, resulting in truck slamming into ditch. :no :yes :no incident occurred 10/29/2021. we never received any indication of issues until weeks after. upon looking further into the recall we saw that the notices were set to be sent out 10/30/2021. one day after incident. furthermore we also see another recall that was never fixed from 9/20, of which we never were sent any info on and remains not addressed per this website. (RECALL RELATED INCIDENT) TS
The contact owns a 2019 Freightliner Cascadia. The contact stated that while driving at various speeds, the led headlights dimmed, and the contact was unable to see the roadway. The dealer was contacted and informed the contact that there was no recall on the VIN. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 375,767.
TL* the contact owned a 2019 freightliner cascadia 126. The contact stated while an employee was driving 35 mph, when the brakes seized and the axle caught fire. The contact stated ABS warning light illuminated. The driver could park on the side road and extinguished the fire with a fire extinguisher. The contact stated no police or fire report was filed. The vehicle was taken to local dealer velocity truck centers - whittier located at 2429 peck rd, whittier, ca 90601, (562) 447-1200, where it was diagnosed with needing a wheel seal and wheel caliper to be replaced. The vehicle was repaired. The contact stated on the august 28,2020, based on the police report, while his employee was driving at 70 mph, when the driver crashed into the side of the high rail guard for an unknown reason. The driver was pronounced deceased at the scene of the crash. The contact stated the crash was still under investigation. The insurance adjuster deemed the vehicle a total loss. A police report was filed. The vehicle was towed to impound lot. the contact received notification of nhtsa campaign number: 20v390000 (service brakes, air) on august 31,2020. The manufacturer had been attempted to call but no one answered. The failure mileage was 210,047.
TL* the contact owns a 2019 freightliner cascadia. The contact stated while an employee was driving 70 mph, he noticed that the rear brake lights were constantly illuminated and the ABS warning light was illuminated. The contact received notification of nhtsa campaign number: 20v390000 (service brakes, air) and had the recall repair completed at houston freightliner located at 9550 n loop e fwy, houston, tx 77029. The contact stated that the recall repair was completed but continued to experience the failure. The manufacturer was not contacted. The failure mileage was 247,062.
Power steering pump was bad since I bought the truck. Now it takes a lot of strength to turn the wheels when I park ( low rpm) the dealer cherged me over $ 350 and they said that they could find the problem. Junk !! it feels like IS locking up even on highways when engine cruises at low rpm 2 : headlights bad design . The led / turn signal : the bulb itself IS an led light, but IS way to close to the plastic bars inside the headlight, and that causes burns in the plastic , resulting in a very dim turn light signal and day light driving lights . The only way to fix it IS to buy another headlight assembly crap also
The vehicle was traveling on a highway speed 65 mph wheat road surface, suddenly the truck steer to the left when the driver tries to correct the truck in a straight position the steering wheel IS not responding, after a fraction of the second the truck turn to right crossing 2 line traveling hit the rails on the side of the road and end up into a tree.
Truck slams on its brakes randomly. Locks them up when there IS nothing in front of me and has almost caused me to have a bad accident. It has been doing this ever since I started driving this truck and have put 25,000 miles on it. it has 50,000 miles on odometer. I have been driving for 35 years with no accidents and this truck IS going to cause a very bad accident. I am a penske driver based in mt hope ohio and management IS doing nothing. we have 10 of these trucks at our facility with this braking feature and we are all about to quit or hire attorneys. thanks [xxx]. [Xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *tr
Hard to control truck at highway speed couldn't keep in lane.pulled off exit steering would only go to left.lucky it didn't do it at 70 miles a hour or I wouldn't be filling this out.steering box locked up no ability to turn
TL* the contact owns a 2019 freightliner cascadia. While driving 70 mph, the load bars detached from the vehicle without warning. The vehicle was taken to stoops freightliner quality trailer dayton (6369, 7800 center point 70 blvd, dayton, oh 45424), but was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was 7,900. *Dt*jb
Valve cover gasket leaking oil at 20.000 miles. very hard steering when low rpm ( parking and eco - transmission shift to neutral at high speed , resulting in low rpm. Safety problem if a turn IS required) bluethooth IS useless. Very bad reception on the other end brakes : shift sometime to left or to right, when apllied. fuel gauge off by 1/8 of capacity and getting worse
The avoidance collision system will randomly cause the brakes to slam on when approaching overpasses while moving on the highway, this IS happening with all the 2019 trucks with the avidence system
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
On May 26, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23010) to assess reports of false positive activation of the Automatic Emergency Braking (AEB) system in model year (MY) 2017-2022 Daimler Trucks North America (DTNA) vehicles. The reports alleged that activation of the AEB system occurred while driving with no apparent obstruction in the vehicle's forward path, resulting in sudden vehicle deceleration. DTNA indicated that it received of a total of 315 reports that may relate to the alleged defect in MY 2017-2022 DTNA vehicles. DTNA stated that the vast majority of false positive activation of the subject systems occur in very limited durations and result in a five mile per hour deceleration. ODI considered four AEB systems offered by DTNA: Detroit Assurance 2.0, Detroit Assurance 4.0, Detroit Assurance 5.0, and Wabco OnGuard. ODI’s analysis shows that of the Detroit Assurance versions, all are failing at similar rates. The OnGuard AEB systems equipped on the same model and model year vehicles have experienced a significantly lower claim rate. To date, ODI has received a total of 32 consumer complaints of inadvertent activation of AEB in MY 2017-2022 DTNA vehicles. In total, ODI reviewed 347 unique (i.e., non-duplicative Vehicle Identification Numbers) reports that may relate to the alleged defect, which include 24 reports involving a crash, 13 reports involving an alleged injury and one report with a fatality. PE23010 has been upgraded to an Engineering Analysis to further assess the scope, frequency, and potential safety related consequences of the inadvertent AEB activations in MY 2017-2022 DTNA vehicles. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
On May 26, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23010) to assess reports of false positive activation of the Automatic Emergency Braking (AEB) system in model year (MY) 2017-2022 Daimler Trucks North America (DTNA) vehicles. The reports alleged that activation of the AEB system occurred while driving with no apparent obstruction in the vehicle's forward path, resulting in unexpected and sudden vehicle deceleration. ODI sent an information request letter to DTNA on June 15, 2023.In its September 1, 2023, response, DTNA indicated that it received of a total of 315 reports that may relate to the alleged defect in MY 2017-2022 DTNA vehicles. DTNA stated that the vast majority of false positive activation of the subject systems occur for very limited durations and result in a five mile per hour deceleration. ODI considered four AEB systems offered by DTNA: Detroit Assurance 2.0, Detroit Assurance 4.0, Detroit Assurance 5.0, and Wabco OnGuard. ODI’s analysis shows that of the Detroit Assurance versions, all fail at similar rates. The Wabco OnGuard AEB systems equipped on the same model and model year vehicles have experienced a significantly lower claim rate. To date, ODI has received a total of 32 consumer complaints of inadvertent activation of AEB in MY 2017-2022 DTNA vehicles. In total, ODI reviewed 347 unique (i.e., non-duplicative Vehicle Identification Number) reports that may relate to the alleged defect, which include 24 involving a crash, 13 reports involving an alleged injury and one report with a fatality. PE23010 has been upgraded to an Engineering Analysis (EA25006) to further assess the scope, frequency, and nature of the inadvertent AEB activations in MY 2017-2022 Freightliner Cascadia and Western Star 5700 vehicles.In particular, this EA will assess the safety consequences likely to arise in the scenarios during which the AEB inadvertently and unexpectedly activates, such as the speeds and conditions during which the activation occurs. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation to investigate reports of engine electrical wiring harness chafe on the subject vehicles.ODI analysis found thousands of unique harness part numbers, spanning the two generations of vehicle chassis assembled at multiple vehicle assembly plants in two different countries, with multiple sub-models, incorporating over thirty powertrain choices.Each wiring harness could contain several dozen individual wires for power, ground and communication purposes depending on the multitude of equipment options available for custom vehicle configuration. ODI identified three primary areas where a wiring harness bundle may chafe: the air compressor support bracket, the transmission case, or the coolant surge tank. In each case, the root cause was some combination of inadequate design clearance, installation variability and relative motion between the wiring harness and the point of contact, such as from vibration. The chafing could result in a range of consequences from none to various diagnostic fault codes, telltale illumination, driver warning center messages, erratic electrical component operation, difficult or no engine start condition, engine de-rate (power reduction), engine shut down, inoperative transmission gear selection, or an unexpected shift to neutral.These potential consequences vary depending on the specific damaged wire in the harness and the exact failure mode, such as intermittent short circuit to ground or open circuit. Generally, the chafing resulted in a progressive series of driver warnings with high levels of detectability over the course of several days and ignition cycles. Drivers usually heed warnings before an engine shutdown condition occurs and the driver may override an engine shutdown countdown timer using the override switch. If the driver allows the shutdown event to occur, the engine can almost always be immediately restarted. Incident rates for an engine shutdown with no warning or a transmission shift to neutral while driving are both very low. ODI received one complaint (NHTSA ID Number 11366557) from a fleet mechanic, who reported in a subsequent interview that he repaired at least six subject vehicles that experienced the alleged defect condition. However, there have been no new Vehicle Owner Questionnaire complaints received by ODI since opening this investigation, and there are no known crashes, fires or thermal events, or injuries or deaths related to the alleged defect. Accordingly, no safety-related defect trend has been identified. Based on available information, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI report cited in the Closing Resume ODI Report Identification Numbers document, go to NHTSA.gov.
In its process for evaluating Early Warning Reporting data, the Office of Defects Investigation (ODI) found twenty-four (24) field reports involving headlight fires on Freightliner Cascadia trucks, model years 2017 and newer produced by the vehicle manufacturer, Daimler Trucks North America (DTNA). ODI contacted DTNA and learned that it was aware of halogen bulb-related thermal events. DTNA stated a belief that the issue was due to incorrect bulb replacement during maintenance. However, some vehicles experienced fires within the original equipment halogen bulb's expected life range.In July 2019, DTNA released a service bulletin and a training video covering proper headlight bulb replacement. There have been 17 fires, with 3 total vehicle losses, since DTNA released this extra training information.On February 25, 2021, ODI opened a Preliminary Evaluation (PE21-006) and sent an Information Request (IR) letter to DTNA.After the PE opening, DTNA reevaluated the data and found additional thermal events at low mileages and decided to file a recall. On May 14, 2021, DTNA submitted recall 21V-357 for 72,508 vehicles covering 2017-2022 models (exceeding the population and model years of this investigation). The planned owner and dealer notification date is July 12, 2021.For the remedy, DTNA will open up the 2-inch access into a 4-inch access hole into the inner fender to provide better access for the maintenance replacement of the bulb, and add a label that provides a visible warning to aid in the correct installation during the change. Additionally, a new foam grommet will replace the flammable rubber boots for both the high and low beam bulbs, improving access to the interface point where the bulbs install into the socket of the reflector. ODI believes that the scope of DTNA recall 21V-357 is sufficient, and accordingly, PE21-006 is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist on other models or MY vehicles outside of the recall scope. The agency reserves the right to take further action if warranted by the circumstances.
On August 31, 2020, the Office of Defects Investigation (ODI) opened a recall query, RQ20001, to investigate the allegations of water intrusion into the truck cab signal-detect and activation module (SAM cab).The investigation further evaluated the effectiveness of the original recall remedy, and the installation of an updated drip shield as it relates to continual water intrusion resulting in the loss of electrical functions and potential fire.The potential hazard was the increased risk of a crash and injury in certain model year (MY) 2007-2021 Freightliner Cascadia P3 vehicles manufactured by Daimler Trucks North America (DTNA). ODI sent DTNA an information request (IR) letter on September 29, 2020.DTNA's November 20, 2020, IR response detailed how the company had implemented various improvements through recall 09V024 and multiple technical service bulletins (TSBs) to mitigate water intrusion.The effectiveness of new windshield seals and revisions to the drip shield is evident by the downward trend in claims rate from an average high of 7.64% in the beginning product life of Cascadia P3 (MYs 2007-2009), to 1.79% average for MYs 2011-2018, and down to 0.49% towards the end of the Cascadia P3 production.Moreover, the data shows that most failures occurred within the first three years of service with a significant downward trend thereafter. In view of the current overall low failure rate, the nature of early-life failure, and failure rate trending downward since model year 2017, this Recall Query (RQ) is closed. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
On May 1, 2020, the Office of Defects Investigation (ODI) opened PE20006 to investigate complaints of intermittent loss of power steering assist in Daimler Truck North America (DTNA), Volvo Trucks of North America (Volvo) and PACCAR vehicles equipped with a ZF/TRW (TRW) THP60 steering gear. The investigation focused on 2010-2020 DTNA Freightliner Cascadia, M2 and WST; Volvo VN, VAH and VHD and PACCAR 337, 365, 389, 567, 579 model vehicles.Field reports and interviews with fleet drivers allege that high power steering fluid temperatures could result in internal seal and bearing failures causing pressure fluctuation, affecting left and right-hand turns. The inability of the driver to steer the vehicle as intended can increase the risk of a crash and injury. ODI analyzed data provided by TRW, DTNA, Volvo, and PACCAR in response to individual information request letters.ODI found that most failures occurred within the first two years and/or 50,000 miles of service. The claim rate decreased with time and miles in service and remained less than 0.5%. ODI normalized data from each of the manufacturers and determined that there was not a substantial difference in the failures.Additionally, TRW improved a seal in the steering gear in December 2015.Trucks built on or after 2016 (as 2017 and newer model years) show a decreasing trend of failures. In view of the overall low failure rate, the nature of early-life failure, and failure rate trending downward for model years 2017 and newer, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.