2006 Honda Accord
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Honda › Accord › 2006
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2006 Honda Accord. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
17 recalls name the 2006 Honda Accord. Newest first.
Dorman Products, Inc. (Dorman) is recalling certain Accelerator Pedal Assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 Acura MDX, 2004-2008 Acura TL and TSX, 2003-2007 Honda Accord, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot and 2006-2014 Honda Ridgeline vehicles. The rotating portion of the…
If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
Dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began December 9, 2019. Owners may contact Dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is AS1019XXXX.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag…
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag…
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007…
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.) is recalling certain 2003-2012 Honda Accord and Pilot, 2010 Accord Crosstour, 2001-2011 Civic, 2002-2011 CR-V, 2003-2004, 2006-2008 and 2011 Element, 2007 and 2009-2013 Fit, 2010-2012 Insight, 2002-2004 Odyssey, and 2012 Ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
Honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began June 22, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are K1P, and M1O.
Honda (American Honda Motor Co.) is recalling certain model year 2004-2007 Accord vehicles manufactured October 1, 2003, to August 17, 2007. The affected vehicles may have been assembled with an incorrect passenger frontal air bag module that does not comply with the advanced air bag requirements. As such, these vehicles fail to comply with the…
An air bag module does not meet the advanced air bag requirements can increase the risk of injury or death in the event of a crash.
Honda will notify owners, and dealers will inspect and replace the air bag module as necessary, free of charge. The recall began on May 2, 2016. Owners may contact Honda customer service at 1-800-999-1009. Honda's number for this recall is JZ3.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2005 Honda Civic vehicles manufactured March 21, 2000, to January 20, 2005, 2001-2004 Honda Civic GX vehicles manufactured June 14, 2000, to August 19, 2004, 2003-2005 Honda Civic Hybrid vehicles manufactured February 24, 2002, to January 18, 2005, 2003-2007 Honda Accord vehicles…
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the passenger seat occupant or other occupants possibly causing serious injury or death.
Honda will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are JU4, JU5, JU6, and JU7. Note: Vehicles that have already received a replacement passenger air bag inflator as part of the recall remedy for an earlier campaign such as 14V353 or 14V700 (Honda recall numbers S95, JH6, JH7, JH8, JH9, JJ0, JJ1, JJ2, JJ6, JM5 and JM6) are not included in this recall. However, this recall does supersede 13V132 and 14V349. Note: On December 18, 2015 Honda informed NHTSA of an expansion of this recall to include certain model year 2004 Honda CR-V vehicles in addition to additional model year 2003 CR-V vehicles.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with…
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Honda is recalling certain model year 2007 and 2008 Acura TL and model year 2003-2007 Accord V6 vehicles. In May 2012, Honda filed a defect report to recall certain model year 2007 and 2008 Acura TL vehicles. In September 2012, Honda informed the agency that it was including an additional 573,147 vehicles including certain model year 2003 through 2007…
If this occurs, power steering fluid can leak onto a hot catalytic converter, leading to smoke and possibly an under-hood fire.
Honda will notify owners, and dealers will install a new heat resistant power steering hose, free of charge. The original recall began in June 2012, and owners of those vehicles may obtain the free remedy. Sufficient parts are not yet available for owners of the vehicles covered by the September 2012 expansion, but are expected to be available in early 2013. Honda will notify owners of these vehicles beginning on October 26, 2012, and will notify these owners again when parts are available so those vehicles can be brought to dealers for applications of the free remedy. Owners may contact Honda customer service at 1-800-999-1009.
Honda IS recalling certain model year 2005-2010 accord, 2007-2010 CR-V, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and…
This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.
Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Certain maxzone headlight assemblies, depo brand, p/nos. 317-1131L-as, 317-1131r-as, 317-1131l-us, and 317-1131r-us, sold for use as aftermarket equipment for the above listed passenger vehicles. during production a slight distortion of the bezel changed the luminous intensity of the turn signal. these headlamps fail to conform to the requirements of…
Decreased lighting visibility may result in a vehicle crash.
Maxzone will notify owners and offer reimbursement for any noncompliant headlights. the recall began on may 17, 2007. owners may contact maxzone at 909-822-3288.
Certain tyc headlamp assemblies p/ns 20-6361-00 and 20-6362-00 sold as aftermarket equipment for 2003-2006 honda accord passenger vehicles. the photmetric were misaligned which does not comply with federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Misalignment of the lights deminishes frontal illumination which could result in a vehicle crash.
Genera will notify owners and offer to repurchase the noncompliant lamps. the recall began on january 26, 2007. owners can contact genera at 714-522-6688.
On certain passenger vehicles and motorcycles, the owner's manuals contain incorrect contact information for the national highway traffic safety administration's (nhtsa) vehicle safety hotline.
The language in the owner's manuals IS not in accordance with the current mandatory requirements.
Honda will send a postcard to dealers and owners with the correct nhtsa vehicle safety hotline information and with instructions to insert the card into the "reporting safety defects" section of the owner's manual. the recall began on august 2, 2006. owners may contact honda at 1-800-999-1009, acura at 1-800-382-2238 or honda motorcycles at 1-866-784-1870.
Certain tradesonic combination lamps sold as replacement lamps for use on the above listed passenger vehicles. combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
Tradesonic will notify owners and replace the lamps free of charge. the recall IS expected to begin during july 2006. owners may contact tradesonic at 626-934-8884.
Certain anzo combination headlamp assemblies sold as replacement lamps for use on certain passenger vehicles. some combination lamps are not equipped with amber side reflectors which fail to conform to federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash.
Anzo will notify owners and replace the headlamps free of charge. the recall began may 9, 2006. owners may contact anzo USA at 909-468-3688.
On certain passenger vehicles, the tires could have been damaged when the tires were mounted on the wheels. in certain circumstances, the bead area of the tire may have been damaged.
If the bead sealing area IS damaged, loss of air could occur while driving, increasing the risk of a crash.
Dealers will remove all four tires and inspect them for bead area damage. if there IS damage, a new tire will be installed free of charge. the recall began on december 2, 2005. owners may contact honda at 1-800-999-1009.
On certain passenger vehicles, on the frontal airbag system where the two external impact sensors IS mounted, near the front headlights the front impact sensor bolts were not properly torqued.
If the bolts loosen or fall out, the sensor may fail to properly detect a crash, possibly resulting in delayed or non-deployment of the front airbag increasing the risk of injury.
Dealers will inspect and remove the bumper and retorque the loose bolts. the recall began on november 7, 2005. owners may contact honda at 1-800-999-1009 and acura at 1-800-382-2238.
I was at the grocery store, XXX about 10:00pm, got a few things of food, I got in the care and started to drive home, I was at a stop sign in the parking lot, took off from SS, going about 5mph, the passenger wheel turned sideways, the bottom of the wheel was facing horizontal because the upside-down lower ball joint let go, just separated with no advanced notice or sound, it just happened, 2006 Honda Accord EX, 2.4L. This is an engineering defect(abortion) which should have been corrected many, many years ago. This is Honda Motor Company's fault and the need to be liable, because they are civilly, this has been going on so long without consequences, it should be criminal. This has happened over the years on Accords 2003-2007 and other models also, I have always owned civics and never experienced this. When this happened, the FRAME slammed on the ground, it was very Traumatizing, to put it mildly. This is one of the most Traumatizing things I have experienced in my life, this frame slamming on the ground, it's a very horrible feeling. This is unacceptable from a car Manufacturer in the [XXX], this should never happen, it's very traumatizing, so BAD. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
I was driving my car on the highway when suddenly my passenger side airbags deployed from the passenger seat & the ceiling (headliner) without a collision. The police came to the scene & said that it was unsafe to drive the vehicle.
I attempted to contact McConnell Honda in montgomery alabama; which is now Cannon Honda Montgomery about my 2006 Honda accord v6. To my understanding there was a recall for the power steering feed hose. I don't recall being contacted when the recall was issued. My last attempts to get my car scheduled was October 2, 2026 and October 3,2026. Now the pump has seized and broken my drive belt. I need assistance with getting clarification about the time frame of issued recalls being fixed by dealership /Honda certified shop. The failure of pump now caused another issue. My car now is inoperable.
After driving my Honda Accord for 135,000 miles, the ignition switch malfunctioned and I am unable to start the car, it seems like I need to replace the switch. After doing research I found out that many Hondas of the same model and years 2003-2009 experienced the same issues which leads me to believe their might be a manufacturing default.
The contact owns a 2006 Honda Accord. The contact stated that while driving 15-20 MPH, the contact became aware of an abnormal burning odor, and there was smoke coming from under the hood. The contact stated that the smoke increased while at a complete stop in traffic. There was no warning light illuminated. The contact inspected the vehicle after pulling over to the side of the road and after arriving at the residence. The contact stated that the power steering hose was leaking at the back of the engine, near the firewall, onto the catalytic converter, and onto the power steering lines. The vehicle was taken to the dealer to be repaired under NHTSA Campaign Number: 12V222000 (Steering); however, the dealer informed the contact that the recall repair could not be performed because the power steering pump was an aftermarket part. The contact stated that the dealer failed to honor the recall repair, which only involved the power steering hose replacement. The vehicle was taken to Automotive Technology of West Islip, where the contact was informed that the vehicle should be repaired under the recall. The mechanic contacted the manufacturer on the contact's behalf; however, the manufacturer confirmed that the recall repair could not be performed because the power steering pump was an aftermarket part. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 141,000. Parts distribution disconnect.
Nhtsa ID#89 there IS a line up stop & go for pick up item , so it shift nutrual an d from time to time as like on line loading. All of the certain, the car speed up, I can not stop it by apply the brake, it happen 2 times. It was out of my control. "Unexpected vehicle movement increases (the risk of a crash )or personal injury to persons within the path of arol ling vehicle. " I am hitting vichle in front and cause of damage my vechicle too the car I drive a serious damage radiator condensor damage, frame was bent to 45 degree hitting radiator cooltant leaking. Software need to be upgrade IS unkown to me, I have no idea until now.
Everything in the front end is bad and the back end
It's wearing the tires down to the the wires on the back and the front
The contact owns a 2006 Honda Accord. The contact stated while driving approximately 35 MPH, there was an abnormal metal-on-metal grinding sound coming from under the floorboards. The contact stated that the vehicle stalled. There was no warning light illuminated. The contact attempted to restart the vehicle, but the vehicle failed to start. The contact had the vehicle towed to the residence. The vehicle was not taken to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The manufacturer was informed of the failure. The failure mileage was approximately 280,000.
The vehicle was taken to two Honda dealerships apon noticing the D light blinking on the dashboard after reaching highway speeds. Also started getting worse overtime, currently when starting up, and putting into drive, nothing happens, and after a few seconds it will plurge forward into gear on its own. Down shifting when braking is rough and delayed also. Ive addressed this issue with Honda, and they just look my vin number and tell me there is no recall and id have to pay $200 out of pocket simply to run a diagnostic, when I know this should be covered under their recall as all symptoms are matching their current recalls for this vehicle. Also accomanied sometimes with a check engine light indicating the O2 Sensor connected to the catalater converter is having a delayed reaction. Also the airbag red light is always steady illuminated. This vehicle has never been in a crash and is very well maintained and Id like to keep it that way by addressing this issues accordingly in a timely manner. Thank you, Kindly.
While driving down street, both curtain airbags deployed sporadically with absolutely no cause. I was not hit anywhere and I was not even using my brakes or slowing to a stop. My head got smashed in and my view was completely obstructed. I was able to pull off road to safety.
I was ran off the road by another driver on March 8, 2024. I honked so that they would know I was there and then swerved as they continued to come towards me. As this happened, I lost control of my vehicle and it fishtailed on the highway, doing a complete 180° and going from 70 mph to 0 mph as I crashed into a concrete barrier on the shoulder of the road. The airbags did not deploy. My car will likely be totaled and because of its age, we will not keep it. It will not be available for inspection. My safety was put as risk because my airbags did not deploy. Thankfully, in this instance, I was not harmed but I could’ve been. The problem was not confirmed by the dealer. The vehicle was inspected by police and is currently undergoing inspection by insurance. There were no warning signs of this failure.
Unknown
The contact owns a 2006 Honda Accord. The contact stated while driving at an undisclosed speed, the air bag warning light was illuminated on the instrument panel. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V501000 (Air Bags) but the VIN was not included. The manufacturer was not notified of the failure. The failure mileage was 85,000.
While driving home from work at highway speeds in less than 1 minute I went from Total normal Driving Experience to feeling like I had a vibration likely a flat. Luckily it was the back tire so I was able to safely steer off the highway. Upon inspecting the tire it was completely gone! Only minimal sidewall attached to the rim on both inside and outside of the wheel. The sidewall failed approximately 1 in Above the Rim lip. All the way around on both sides. This is on a general gmax as-05 215/50/ ZR 17 purchased in 2021 from tirerack.com. these tires are used seasonally in addition to winter tires so they have minimal miles for being a little over 2 years old. I also recently had the car New York State inspected in the last 30 days. upon reaching out to Tire Rack I learned there was a substantial recall of almost 100,000 continental and general brand tires that were " over cured". This tire is not on the list but did exactly what the description of the recalled tires had done. I do not feel safe traveling on the remaining tires and I feel other people could be in danger of this happening to this model Tire. I just want to keep myself and other safe and feel like I'm going to get stonewalled with a retailer on warranty. Also want to keep others from potential harm as this had happened on my front wheel in the middle of rush hour traffic it could have been disastrous and deadly! Up until this I loved these tires they were sporty, great handling, quiet and wearing very evenly and seem to be long-lasting so far. I hope Continental/general does the right thing by adding this tire to the recall list. Also this car was recently New York State inspected less than 30 days ago there is ample tread and the tires have been diligently rotated and they are only on the car for 7 months at a time as I have a set of General winter tires that I switch between seasonally.
The contact owns a 2006 Honda Accord equipped with General Tires, Tire Line: G-Max AS-05, Tire Size: 215/50/R17, DOT Number: CN6AWD8R4020. The contact stated that while driving at approximately 65-70 MPH, the vehicle was vibrating and making an abnormal sound. The contact pulled over to the side of the roadway. Upon inspection, the contact noticed that the rear passenger's side tire had an inch of tread remaining on the sidewall. The contact replaced the tire with the spare tire. The tire retailer was made aware of the failure. The tire manufacturer was made aware of the failure. The tire failure mileage was approximately 15,000. The vehicle failure mileage was 139,000. The VIN was unavailable.
The AC DELCO brake pads were reported to be designed for use on the front calipers of a 2006 Honda Accord. While performing a routine brake caliper cleaning and inspection, I observed that the friction material completely separated from the metal backing plate on the passenger outboard brake pad. Additionally, an area near the top portion of the friction material cracked, forming an approximate one inch vertical tear through the pad. The crack was missing approximately 4 to 5 millimeters of friction material across horizontally (i.e., it was possible to look through it). Separation of the friction material from the backing plate appeared to be partially from corrosion/rust that was able to occur behind the friction material; between it and the metal backing plate. The two points at which protrusions from the friction material attached to the backing plate experienced shear and were completely severed. This resulted in diminished braking capacity and may have contributed to a minor accident as the car was not braking as effectively or responsively as usual.
The left passenger seatbelt will not retract - supposed to be a lifetime warranty and as a result airbag indicator light is on, so I take it to the dealer and they tell me seatbelts are on back order and they said it could be months or even years before I get a seatbelt and there is no ETA for it to arrive. So now, I have to drive the vehicle with no seatbelt and non-working airbags risking tickets or worse loss of life. This is unacceptable. What is the point of a lifetime warranty .
Clicking in steering wheel, and steering wheel very stiff. Not sure if it's the flex coupler or something else. Has been ongoing for probably 2 or 3 years. Also headliner is falling, has been lifting for a couple of years but now it's to the point where I'm afraid it'll fall on my head and block my vision while driving. This is a common issue with these older hondas Headliner needs a recall/warranty extension from the manufacturer. The flex coupler if that is the issue needs a recall or warranty extension as well. Kia has done this for their older specific vehicles with this flex coupler issue (my other car which had the same problem)
Power steering fluid leakage that smokes up under hood, loss of power to steering and extremely difficult to steer. Major safety issue.
The 2006 Honda Accord VP Sedan was hit in an intersection by a Van that was trying to speed through a red light. The van hit the Accord on the front of the car, which spun the Accord causing it to hit the van again in the rear passenger side. The Accord has 6 airbags, but none of them went off. It appears that the front airbags should have went off, and possibly the passenger side airbags. I contacted Honda about the issue, but they insisted that I follow the direction that the insurance company determined.
I was driving up a hill got to the stop light which red . And then light turned green i went to take off i heard a big bang as i began to accelerate my vehicle began to drift backwards into traffic I put my hazard on one grabbed the emergency brake. I then was able to have some people punch mi vehicle into a parking space until a tow truck came . Here if goes my drivering axle broke in half and my CV joint broke which my transmission fell.
Brought my 2006 Honda Accord at Scott Robinson Honda Service Center and was told I would have pay for the airbags..
The passenger air bag indicator light stays illuminated. The car has been taken to several different mechanics who temporarily are able to make the light go away but that say that this is an issue they have seen with different 2006 Honda Accords and the it is a defective factory sensor. Tony Honda in Oahu HI has said that because they do not show a recall for this vehicle, it would be an out of pocket cost. It seems that this is a safety issue because it is unsure whether there is a problem with the airbag itself and not just the sensor. Please advise
The contact owned a 2006 Honda Accord. The contact stated that her son was driving approximately 65 MPH. The contact's son lost control and rolled the vehicle. The contact's son was knocked unconscious due to the vehicle had rolled about 10 times, according to the police report. The police reported that the air bags failed to deploy. The son was transported by ambulance to the ER. The son had suffered a concussion and had multiple small lacerations on both arms and face. The contact's son had suffered severe bruising on his chest, legs, and arms from the effects of rolling the vehicle. The vehicle was towed to an impound lot and declared a total loss by the contact's insurance provider. The manufacturer had not been informed of the failure. The failure mileage was approximately 236,000.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
The Office of Defects Investigation (ODI) received a defect petition requesting that it open an investigation and recall MY 2005 Honda Accord Hybrid vehicles for a possible safety defect related to braking performance.The petitioner in a defect petition letter and in a complaint filed with ODI under Vehicle Owner Questionnaire (VOQ) 10329383 alleging ineffective braking performance of the Honda Accord Hybrid vehicle while driving over rumble strips along side of the highway and simultaneously attempting to the brake.The petitioner alleges this began a chain of events, where the vehicle accelerated uncontrollably, the passenger attempted to stop the vehicle by pulling the parking brake and eventually the vehicle crossing over into traffic flowing in the opposite direction.The result was a crash fatally injuring the passenger and severely injuring the petitioner and two occupants of another vehicle. During the defect petition review, ODI analyzed complaints involving similarly equipped Honda Accord Hybrid vehicles and first and second generation Honda Civic Hybrid vehicles, reviewed data provided to ODI by Honda in response to an information request letter and performed testing of braking performance of a 2005 Honda Accord Hybrid vehicle at NHTSA's Vehicle Research and Test Center in East Liberty, Ohio.Based on this review, ODI does not believe additional investigation is likely to result in a finding that a defect related to motor vehicle safety exists.Therefore, in view of the need to allocate and prioritize NHTSA?s limited resources to best accomplish the agency's safety mission, the petition is denied.This action does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will take further action if warranted by future circumstances.For more information, see the Federal Register notice in the DP10-004 file (www-odi.nhtsa.dot.gov/defects).
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.