2007 Mazda MAZDA6
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA6 › 2007
These records cover every 2007 Mazda MAZDA6. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2007 Mazda MAZDA6. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2004-2005 MPV, 2004 RX-8, and 2006-2007 Mazdaspeed6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: This recall supersedes recalls 13V130, 14V362, 14V773 and 15V869.
Mazda North America Operations (Mazda) is recalling certain 2003-2008 Mazda6, 2006-2007 Mazdaspeed6 and 2004 MPV vehicles nationwide. Mazda is also recalling 2005-2006 MPV vehicles in Alabama, Arizona, Arkansas, California, Delaware, the District of Columbia, Florida, Georgia, Hawaii, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Mississippi…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began July 6, 2018. Mailing to the affected RX-8 owners began July 6, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 2618F. Note: With the addition of the RX-8 vehicles, this recall fully supersedes recall 16V354.
Mazda North American Operations (Mazda) is recalling certain model year 2003-2008 Mazda6, 2004-2008 RX-8, and 2006-2007 Mazdaspeed6 vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the driver's frontal air bag inflator with an alternate inflator, free of charge. The recall began on September 12, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1417G. Note: This recall supersedes recall 15V-382.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Thule, inc. IS recalling 2,323 owner-installed roof-mounted fit kits, models 3068 and 3069, manufactured between january 1, 2008 and february 28, 2009 that are used with thule podium foot packs, models 460 and 460R. these fit kits were sold as aftermarket equipment for use on the vehicles listed above. the bolt(s) used to secure the foot to the vehicle…
Risk and remedy
Risk
This may result in the bolt(s) snapping off during use or without a load. the unsecured rack and load can then come loose while driving creating a potential road hazard, possibly resulting in a vehicle crash.
Remedy
Thule will mail a retro fit kit along with repair instructions to owners free of charge. the safety recall IS expected to begin on or before april 13, 2009. owners may contact thule toll-free at 1-800-238-2388.
Mazda IS recalling 7,200 my 2007-2008 mazda6 vehicles with california emission specifications. the metal fuel tanks on the affected vehicles may have had the pvc protective coating on the outside of the fuel tank damaged during the assembly process which may result in reduced corrosion resistance.
Risk and remedy
Risk
This could lead to perforation of the fuel tank, causing fuel leakage. fuel leakage in the presence of an ignition source could result in a fire.
Remedy
Dealers will inspect the bottom surface of the fuel tank for damage to the protective coating and, if necessary, repair the coating or replace the fuel tank. the recall began on august 28, 2008. owners may contact mazda at 1-800-222-5500, option 2.
Owner complaints
156 complaints15 involved a crash2 involved a fire11 injuries1 deaths
What owners report most
Latest complaints
- Air bags
See attachment Hello what do I need to do? I been trying to have this repaired ,for last 3 years their is no close Mazda dealer and this the only car I have to get to doctors . I got letter after letter and I called explained my situation and someone was going to call me back Everytime with…
See attachment Hello what do I need to do? I been trying to have this repaired ,for last 3 years their is no close Mazda dealer and this the only car I have to get to doctors . I got letter after letter and I called explained my situation and someone was going to call me back Everytime with information for my Mazda 6 2007 to be towed to get repairs and a loaner car till return of my mazda that is under a do not drive . No one ever calls me back..please I don't want metal schrapnal in my face ory passenger my husband is heart patient we need my car can't be without here in sallisaw ok. Now what do we do .
- Air bags
10/31/2023 my daughter was in a car accident driving this vehicle identified by the VIN above. The car was totaled. Airbags did not deploy.
- Air bags
Takata recall. The contact's wife owns a 2007 Mazda Mazda6. The vehicle owner received notification of NHTSA Campaign Number: 17V474000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the…
Takata recall. The contact's wife owns a 2007 Mazda Mazda6. The vehicle owner received notification of NHTSA Campaign Number: 17V474000 (Air Bags) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Electrical system · Engine · Power train
Hello i am a 2nd owner of a Mazda 2007 6. And the man i brought car from said it always did it to him as well.i would explain it as in stopping or speeding up the dashboard lights flicker or goes off, the engine gets real loud and car jerks and shakes and loses power check engine light comes on and…
Hello i am a 2nd owner of a Mazda 2007 6. And the man i brought car from said it always did it to him as well.i would explain it as in stopping or speeding up the dashboard lights flicker or goes off, the engine gets real loud and car jerks and shakes and loses power check engine light comes on and AT.and Cars dyes in reverse a few times on me. Auto lots said that it is common and known for electrical problems and engine issues and pieces called camshafts position actuator and transmission range sensor and gears. And the man owned before me has replaced them multiple times. Its dangerous to be driving specially on interstate and car stalls or lose so much power that i only get about 20 miles an hour
- Exterior lighting
While the car IS stationary,and when car IS in motion interior lights come on and go off whenever it decides to, wheather it's day or night.
- Seat belts
I'm stuck in my vehicle because no amount of pressure will release the switch lever. Luckily this wasn't a traffic stop because this would have made things complicated if not deadly, not even considering the high possibility that I would need to exit the car immediately should I be in a accident.
- Engine · Steering · Suspension
Mazda 2007 mazda 6 with severe corrosion to engine subframe posing a very serious safety concern if breaks while driving. Current mazda 6 in question had less than 100K miles and was spotted by an oil change technician. I've asked a couple mechanics and was informed the car would be a possible…
Mazda 2007 mazda 6 with severe corrosion to engine subframe posing a very serious safety concern if breaks while driving. Current mazda 6 in question had less than 100K miles and was spotted by an oil change technician. I've asked a couple mechanics and was informed the car would be a possible death trap to myself or others if not fixed quickly. All parties are amazed at amount of corrosion, internet searches suggest this IS a very common problem and already a recall in place for other year mazda 6'S.
- Structure › Body
Subframe rusted in the front right, behind the engine close to the control arm. Just this part of the subframe.
- Air bags
Takata recall. for the past year the airbag light has been coming on. It seems to occur at warmer temperatures and goes away and colder temperatures. the code that comes back IS b2234 and this IS associated with the driver's airbag. I believe this has occurred because of the replacement of the driver's side airbag replacement that was done on my vehicle due to the takata recall.
- Electrical system · Exterior lighting
The low beam headlights on the vehicle are known to go out because of a 'harness issue' after research numerous other mazda owners are having the same isssue. This IS whole stationary, in motion , city, highway, doesn't matter. A quick remedy IS hitting the light and it'll turn back on. I received a ticket on a military base because of this. Im
- Power train
I have an automatic 07 mazda 6 s grand touring that IS having a problem with the transmission jerking. The car only has 100K miles on it. The jerk normally happens between gears 4-6.
- Air bags
Takata recall, same as driver side. Told they don't have the parts call mazda it's been years now. Still driving/with kids!
- Air bags
Takata recall trying for 4 yrs now always told no part for it or call mazda
- Air bags
Takata recall. Took my mazda to a certified mazda dealership to replace the defected air bags but the airbag light still stays on making me concerned that the problem with my airbags has not been fixed. I have a 4 month old that rides in this vehicle and I am concerned for her safety.
- Air bags · Engine · Structure › Body
The airbag deflated when I was involved in a car accident september 25, 2015. I suffered a fractured sternum from the airbag and severely multiple fractures in right ankle. This car was totaled. The accident was not my fault, the other car moved into my lane and I struck it head on.
- Air bags
Air bag light won't go off stays on
- Air bags
I have got a auto airbag settlement letter
- Engine · Power train · Structure › Body
Engine cradle subframe rusting/rusted out prematurely. Holds engine in place. Stationary.
- Air bags
TL* takata recall. The contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign numbers: 15v382000 (air bags) and 16v354000 (air bags). The part was not available within a reasonable time frame to schedule the recall repair. The dealer was contacted several times (cochran…
TL* takata recall. The contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign numbers: 15v382000 (air bags) and 16v354000 (air bags). The part was not available within a reasonable time frame to schedule the recall repair. The dealer was contacted several times (cochran mazda of north hills, 10885 perry hwy, wexford, pa 15090 (724) 940-1000), but did not give a specific date for when the part would become available. The contact was unable to determine when the vehicle would be repaired. The manufacturer was contacted and could not provide an estimated date for when the vehicle would receive the recall repair. The contact was not experiencing a failure. Parts distribution disconnect.
- Air bags
Takata recall, over a year ago I did have a airbag recall for my inflator , which was for my mazda 6 2007, I did have one of them replaced, not sure if it was the passenger side or the driver side now, but only one was replaced at the time because that was all that was recalled at that time, the…
Takata recall, over a year ago I did have a airbag recall for my inflator , which was for my mazda 6 2007, I did have one of them replaced, not sure if it was the passenger side or the driver side now, but only one was replaced at the time because that was all that was recalled at that time, the dealer told me I would have to wait for the other side to be recall, so what if I had a accident in the meantime? The other airbag wouldn't work, because it hadn't been replaced? not very good! the dealer didn't seem to thrilled with the whole inflator recall thing and didn't have very good things to say about it, which made me worry about if the darn thing would work at all! well not too long after I got the second recall note for the other side inflator to be fixed I was in a car accident! Great! well, I was hit from behind at 70mph, the car was hit on the right side and I was thrown into a spin, now, I was not hit in the front, nor did I actually hit dead on in the front of anything! But my windshield was cracked. my right side airbag did deploy and save me from a massive head injury! The car did as it was designed to do in a backend collision, it folded up, the back end took the blunt of the 70mph force, and saved me! I walked out of the car! But the car was totaled! My only question and it was a question of a few other people... Was why did not the front end air bad deploy? Was it not supposed to? Because it had not been it hit hard enough? Or because it needed to be replaced? not sure? all I can say IS that thank goodness in a way I got hit from behind and not in the front, because I am not so sure if I could of depended on the front airbags working correctly! so my accident may have had a totally different outcome!
- Air bags
TL* takata recall. The contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign number: 16v354000 (air bags); however, the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…
TL* takata recall. The contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign number: 16v354000 (air bags); however, the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The vehicle was taken to flagship mazda kennedy (located on ave kennedy km 2.1 urb industrial bechara, san juan, pr 00920) where the driver side frontal air bag was replaced. The contact was informed that the remedy part for the passenger frontal air bag was not available for the repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Air bags
TL* takata recall. The contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign number: 15v382000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer…
TL* takata recall. The contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign number: 15v382000 (air bags); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer confirmed that the parts were not available for the recall remedy. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Fuel/propulsion system
After filling up gas, the entire car smelled like gas. We parked the and got out to check. There was a car fast and prominent leak near the gasket of the fuel tank. There are recalls about it online but not for my specific car even though it IS hazardous to drive.
- Air bags
TL* the contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign numbers: 15v382000 (air bags) and 16v354000 (air bags). The parts for the recall repairs were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repairs.…
TL* the contact owns a 2007 mazda 6. The contact received notification of nhtsa campaign numbers: 15v382000 (air bags) and 16v354000 (air bags). The parts for the recall repairs were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repairs. While driving approximately 35 mph in severe weather, the vehicle suddenly turned sideways and crashed into the cement barrier in the center of the road. The air bags failed to deploy. The vehicle was towed. A police report was filed and there were no injuries. The manufacturer was not made aware of the failure. The approximate failure mileage was 135,000. Parts distribution disconnect.
- Air bags
Takata recall. We keep getting recall notices for the airbag replacement but when we try to schedule an appointment they say they do not have the parts. This has been on going for at least 9 months! Our local mazda dealer IS dennis dillion mazda, boise, idaho.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10232299Speedometer replacement procedure
- 10226924If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay/ Android Auto will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
- 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10225724Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10213430Excessive condensation or water within the headlamp assembly caustion
- 10213429Paint damage Mazda pocket paint guide
- 10213425Speedometer replacement procedure
- 10213423Siriusxm satellite radio registration transfer after unit replacement
- 10213422Proper usage of driver's floor mat.
- 10213421Condensation/Fog in front and rear combination lights
- 10213417Passenger fAirbag deactivation (PAD) indicator light illumination
- 10213399Brake noise, judder and dragging diagnosis and servicing
- 10213387Shock absorber replacement guidelines
- 10213385Stains appear on wheels
- 10213333Battery test procedure requirements using the GR81291
- 10213332Battery Maintenance
- 10213331Sulfur smell from exhaust system.
- 10213330PreMixed long life "FL22" Engine Coolant
- 10213329Engine Start /Stop Procedure with room fuse removed
- 10213326Mazda guidelines for factory scheduled maintenance
- 10209778The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10209761Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
- 10208567Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10208556Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10206002Automatic Transmission/Transaxle Cooler and Lines Flushing Procedure: Automatic Transaxle/Transmission (A/T) oil cooler and lines must be power flushed completely before an overhauled or replacement A/T is installed (except SKYACTIV-DRIVE). The most common cause of repeat A/T failures is lack of lubrication to the front and rear planetary gears. This is usually caused by an accumulation of metal particles and debris (from a previous A/T failure) on the internal mesh type baffle of the oil cooler. Power flushing will remove the restriction by back flushing, followed by forward flushing to dislodge a restriction, then back flushing again. This will in turn ensure full ATF flow for the transmission when it is operating.
- 10205994Battery Maintenance: This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10202696Some customers may complain about high engine oil consumption. Before attempting any repairs, verify the complaint by using the guideline below to determine if an engine repair is necessary:
- 10202695Ethanol is becoming a common additive in gasoline. Gasoline containing ethanol is likely available at your local gasoline station. Typical blends of ethanol include E10 and E85. E10: A blend of 10% ethanol and 90% gasoline. E85: A blend of 85% ethanol and 15% gasoline All Mazda vehicles can run on gasoline containing up to 10% ethanol (E10) but only some 1999-2001 B3000 trucks can run on gasoline with more than 10% ethanol blended. E10 compatible vehicles: All Mazda vehicles. E85 compatible vehicles: 1999-2001 B3000 Mazda trucks with the 8th VIN digit is V.
Every Mazda MAZDA6 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.