2012 Mazda MAZDA6
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › MAZDA6 › 2012
These records cover every 2012 Mazda MAZDA6. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2012 Mazda MAZDA6. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.
Mazda North American Operations (Mazda) is recalling certain 2011-2013 Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland,Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West…
Risk and remedy
Risk
Corrosion may weaken the mounting point for the passenger side lower control arm, unexpectedly changing the steering alignment and increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began June 13, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I. Note: This recall is an expansion of Recall 18V-631.
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.
Mazda North America Operations (Mazda) is recalling certain 2012 CX-7, CX-9 and Mazda6 vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A."…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the front passenger side air bag inflator with an alternate inflator, free of charge. The recall began October 4, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 17V-012.
Mazda North America Operations (Mazda) is recalling certain model year 2010-2012 Mazda6 vehicles manufactured September 14, 2009, through May 2, 2011, and equipped with 2.5L engine. In the affected vehicles, spiders may weave a web in the evaporative canister vent hose, blocking it and causing the fuel tank to have an excessive amount of negative pressure.
Risk and remedy
Risk
Negative pressure could cause the fuel tank to crack resulting in a fuel leak, increasing the risk of a fire.
Remedy
Mazda will notify owners, and dealers will reprogram the powertrain control module and inspect and clean the canister vent line. If a web was found in the line, the fuel tank and check valve on canister vent line will be replaced. These repairs will be done free of charge. The recall began on April 30, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number associated with this campaign is 7214C.
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.
Risk and remedy
Risk
If all three door latch mounting screws become excessively loose the door latch mechanism would not engage and the door might open while the vehicle is in motion increasing the risk of accident or injury.
Remedy
Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.
Owner complaints
99 complaints5 involved a crash2 involved a fire6 injuries
What owners report most
Latest complaints
- Unknown or other
Passenger dash has cracked some and dash is very very sticky..why has this happened..I feel if airbag had to deploy it would not because of this situation
- Suspension · Unknown or other
The rear subframe and suspension parts are rusted so bad that the car is not safe to drive. Looked up recalls and found out the front subframe had a recall and was taken care of before I bought the car. Also found recall for my model of car that were registered in state that use salt on there roads…
The rear subframe and suspension parts are rusted so bad that the car is not safe to drive. Looked up recalls and found out the front subframe had a recall and was taken care of before I bought the car. Also found recall for my model of car that were registered in state that use salt on there roads which is one of the state i live in. Was told my Mazda corporation the only certain 2012 mazda vehicle's vehicle's were covered for rusting issues with the rear . If the front of the car is recalled and the same problem happens with the rear of the car shouldn't it be covered for something? I have an appointment coming up on the 21 of January which is ridiculous that I have to wait 3 weeks to have it looked at. . Thank you for your time. The only reason I found the problem with the car was a stick got stuck in the rusted out parts and when I took it out a bunch of rust fell on the ground.
- Structure · Suspension
The contact owns a 2012 Mazda Mazda6. The contact stated while driving 55 MPH and crossing a bridge, the vehicle stopped unexpectedly after driving over several expansion joints. The contact stated that the vehicle had not stalled. The contact exited the vehicle and noticed that the passenger’s…
The contact owns a 2012 Mazda Mazda6. The contact stated while driving 55 MPH and crossing a bridge, the vehicle stopped unexpectedly after driving over several expansion joints. The contact stated that the vehicle had not stalled. The contact exited the vehicle and noticed that the passenger’s side front wheel was slanted into the wheel well. The contact inspected the wheel well and noticed that the control arm had sheared off at the cross member. The contact stated that prior to the failure, the steering wheel had turned slightly to the right. The contact researched online and related the failure to NHTSA Campaign Number: 19V323000 (Structure, Suspension), which included the VIN. The contact stated that the vehicle was towed to a dealer, where the contact was advised that the VIN was included in a recall, and the contact was advised that the vehicle needed to be diagnosed to determine the cause of the failure. The contact stated that the dealer had not diagnosed vehicle in a month. The manufacturer was informed of the failure and advised the contact to work with the dealer. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer and dealer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 188,000.
- Structure · Suspension
The contact owns a 2012 Mazda Mazda6. The contact stated while driving 55 MPH, the steering wheel began to shake violently, with the low tire pressure warning light illuminated. The contact pulled over to inspect the vehicle and discovered that the front passenger’s side tire had detached from the…
The contact owns a 2012 Mazda Mazda6. The contact stated while driving 55 MPH, the steering wheel began to shake violently, with the low tire pressure warning light illuminated. The contact pulled over to inspect the vehicle and discovered that the front passenger’s side tire had detached from the vehicle. The contact's father was called to the scene and the spare tire was placed on the vehicle. The contact then drove to an independent mechanic where both the front driver’s and front passenger’s side tires were replaced. The manufacturer was notified of the failure and referred the contact to the dealer for assistance. The vehicle was taken to the dealer where a diagnostic test was performed; and the diagnostic test determined that the cross member had corroded and caused the tire failure. The contact was then notified that the vehicle was not covered under NHTSA Campaign Number: 19V323000 (Structure, Suspension) and that the warranty on the vehicle had expired. The vehicle remained in the possession of the dealer and was not repaired. The failure mileage was 204,000.
- Suspension
Front subframe completely rusted out causing loss of steering. I believe this should have been covered by Safety Recall 2818I which addresses the issue. Mazda inspected and said because the recall was performed in 2019 on this car, there is nothing more they can do, once and done. Unfortunately their fix didn't take care of the issue.
- Structure › Body
My 2012 mazda 6 Subframe is is unsafe to drive due to over-time corrosion My local mechanics said Madzda Corp. should fix it.
- Suspension
Rear sub frame, critical fail- rusted through. Needs new rear subframe. Wheel pulling to right, unable to align. I bought this car 2 weeks ago for my 16 year old daughter and was told today it needs to be scrapped. She is devastated . We are out 4500 with no recourse. I bought a Mazda because I trusted the safety. I am so disappointed. If the front was recalled the rear should have been too.
- Unknown or other
The rear subframe IS rusted in layers and IS spalling off.
- Air bags · Unknown or other
The passenger dash board is melting. It covers the passengers air bag. I would like to know if a recall is still possible for my vehicle. I understand that there was a recall in 2015-2017, but unfortunately I did not received the notice since I was moving from Illinois to Kansas and later to Texas and continued changing addresses during that time frame.
- Suspension
Severe rusting of the rear frame and suspension
- Steering · Unknown or other
I was driving down the road when my steering, suddenly and with out warning began pulling very hard to the right and the steering wheel began turning to the left. My car made loud noises when I tried to straighten out the steering wheel and when I tried to turn. Its also appeared to be rubbing on…
I was driving down the road when my steering, suddenly and with out warning began pulling very hard to the right and the steering wheel began turning to the left. My car made loud noises when I tried to straighten out the steering wheel and when I tried to turn. Its also appeared to be rubbing on the inside of the wheel well. Further inspection revealed that the support where the control arm is connected to the frame had torn away from the frame due to oxidation. There is significant oxidation on the frame and there are large areas that no longer appear to be solid.
- Structure · Unknown or other
The passenger side Dash on my 2012 Mazda 6 that I just purchased 3 years ago is melting and deteriorating and it's cracked and its leaves a real bad glare on the windshield and I think they said it was a recall that was back in 2015 but this car was never fixed and that recall wasn't fixed so how…
The passenger side Dash on my 2012 Mazda 6 that I just purchased 3 years ago is melting and deteriorating and it's cracked and its leaves a real bad glare on the windshield and I think they said it was a recall that was back in 2015 but this car was never fixed and that recall wasn't fixed so how do I go about getting that recall fixed because when I talk to [XXX] at Mazda direct and Fostoria they said that there was nothing they could do and it is a real bad safety hazard. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Steering · Suspension · Unknown or other
I felt something was weird with the steering one day so I went to mazda dealer because I noticed corrosion on front driver cross and rear components which have corrosion and baseball size holes. Inspected by local mazda dealer in early 2022 was told "we see a lot worse than this" so nothing was…
I felt something was weird with the steering one day so I went to mazda dealer because I noticed corrosion on front driver cross and rear components which have corrosion and baseball size holes. Inspected by local mazda dealer in early 2022 was told "we see a lot worse than this" so nothing was fixed or replaced by dealer. October 2022 failed pa state inspection for subframe rust safety concerns. 2023 got another mechanic to look and they estimate over $6,000 repair cost (docs. Attached). Serious safety concerns causes vehicle to sit unused which makes it available for inspection anytime. Police or insurance representative were not contacted but can be if needed.
- Unknown or other
Sun/moonroof exploded. My own and others' safety were at risk due to falling broken glass The problem was not confirmed by a dealer yet The vehicle will be inspected from glass company/dealer No warning messages or lights indicated the failure.
- Structure › Body
Hello, I have 2012 Mazda6 was involved in a previous Safety Recall in regards to a rusting engine subframe. I was informed to bring my car in my local Mazda Dealer. My car has serious rusting issues with my subframe, Mazda decided in lieu of replacing the subframe they attached a subframe brace.…
Hello, I have 2012 Mazda6 was involved in a previous Safety Recall in regards to a rusting engine subframe. I was informed to bring my car in my local Mazda Dealer. My car has serious rusting issues with my subframe, Mazda decided in lieu of replacing the subframe they attached a subframe brace. While having my car serviced the mechanic and I noticed SEVERE rusting at the subframe which this recall was suppose to taken cared of. Ive attached a couple of pics but I have more that details the severe rusting. I feel a little disheartened that this recall fix the issue adequately. I want to 100% confident that the car is truely safe to drive for me and my family.
- Suspension
I was stopped at a red light in town and went to make a left hand turn when I heard a loud pop and then a springing noise. I myself looked under the car and just assumed I ran over something and it hit the bottom of the car. I had a friend look under it also and he didn't see anything either. I just found this out yesterday when it failed inspection.
- Electrical system
I own a 2012 mazda 6, vin#[xxx], that I bought in 2012. For the past couple of years I've been dealing with electrical issues with this car. For a few years I was just dealing with the headlights continuously going out every 3 or 4 months. At first I was thinking the light was defective, but after…
I own a 2012 mazda 6, vin#[xxx], that I bought in 2012. For the past couple of years I've been dealing with electrical issues with this car. For a few years I was just dealing with the headlights continuously going out every 3 or 4 months. At first I was thinking the light was defective, but after some research I learned that this IS a more than a common occurrence with these cars. This IS the main complaint. It has been linked to the electrical system that your service department said was the issue. It also mentioned the electrical issue causing the car to suddenly shut down which IS the problem I am currently having now. My car has shutdown a total of 4 times, the last time being on the interstate. This IS ridiculous! This IS a known problem by mazda that has not been addressed. Are you waiting for someone to die in an accident? This needs to be fixed immediately. My daughter drives this car! information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *tr
- Exterior lighting
My low headlight beams continue to burn out, especially the driver side. they were last replaced less than 2 weeks ago and the driver side IS out again. I did a google search and there were multiple complaints of this happening to other people. what's worse IS that for the low beams it has to be taken to a mazda dealership to be replaced. it's a safety hazard and expensive!
- Air bags · Unknown or other
There was a recall on the air bags of my car and I was not informed of the recall that was for april 2019. How can this be fixed?
- Unknown or other
The passenger side of my mazda 6 2012 IS literally melting. The dashboard IS all sticky and has a glare that affects my ability to see out the window. The passenger dashboard IS cracking and has pieces that are falling off. It IS a hazard because it causes a glare that limits my ability to see.
- Exterior lighting
Headlight on driver side was burning out every other month needing replaced. Recently changed headlight and the bulb IS fine but the adapter inside the assembly IS burned and charred. Just went to change the passenger side and it has the same issue. Good bulb but the adapter to attach bulb IS…
Headlight on driver side was burning out every other month needing replaced. Recently changed headlight and the bulb IS fine but the adapter inside the assembly IS burned and charred. Just went to change the passenger side and it has the same issue. Good bulb but the adapter to attach bulb IS burned. Reading many complaints online about this being a common issue with 2012 mazda 6. Including issues of lights going out while people are driving and having to tap on the headlight to get it to turn on.
- Structure › Body
There was a recall on the door latches back in 2013 which I got repaired. Today 10/20/2019 after driving on highway 15 south dropping off my kids my son went to close the back passenger door that did not close I had to purchase rope and tape to hold it close so I could drive back home going on the…
There was a recall on the door latches back in 2013 which I got repaired. Today 10/20/2019 after driving on highway 15 south dropping off my kids my son went to close the back passenger door that did not close I had to purchase rope and tape to hold it close so I could drive back home going on the 15 north highway. this IS a huge safety issue I would like to have this issue fix asap I will call the dealer tomorrow and hope they can repair without me coming out of pocket
- Electrical system
Both headlights on vehicle IS not working
- Electrical system · Structure › Body › Door
TL* the contact owns a 2012 mazda 6. While driving approximately 45 mph, the door open icon illuminated. The contact pulled over to the side of the road to check the doors; however, all the doors were closed. The vehicle was taken to hennessy mazda (7261 jonesboro rd, morrow, ga 30260) to be…
TL* the contact owns a 2012 mazda 6. While driving approximately 45 mph, the door open icon illuminated. The contact pulled over to the side of the road to check the doors; however, all the doors were closed. The vehicle was taken to hennessy mazda (7261 jonesboro rd, morrow, ga 30260) to be diagnosed, but they were not able to determine the cause of the failure. The manufacturer was not notified. The vehicle was not repaired. The approximate failure mileage was 96,000.
- Air bags
TL* the contact owned a 2012 mazda mazda6. While driving 35 mph, another vehicle crashed into the front of the contact's vehicle. The air bags did not deploy. A police report was filed. The contact sustained injuries to the back, legs, hip, and neck that required medical attention. The vehicle was…
TL* the contact owned a 2012 mazda mazda6. While driving 35 mph, another vehicle crashed into the front of the contact's vehicle. The air bags did not deploy. A police report was filed. The contact sustained injuries to the back, legs, hip, and neck that required medical attention. The vehicle was towed to a collision center where the vehicle was deemed destroyed. The vehicle was not taken to a dealer or independent mechanic for diagnostic testing or repairs. The manufacturer was not made aware of the failure. The failure mileage was 100,000.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10232299Speedometer replacement procedure
- 10226924If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Cell phone charger/accessory in 12V socket (engine no start or unable to turn off) 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay/ Android Auto will not connect) 6. Over-sized wheels/tires (incorrect GPS location)
- 10226814Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10225724Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10217209In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
- 10215274This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10213460LDWS or ALH warning light on with DTC C1001:92
- 10213432Incoming Call Always display first name of phonebook/contact list
- 10213430Excessive condensation or water within the headlamp assembly caustion
- 10213429Paint damage Mazda pocket paint guide
- 10213427HandsFree bluetooth module and/or text messaging troubleshooting procedure
- 10213425Speedometer replacement procedure
- 10213423Siriusxm satellite radio registration transfer after unit replacement
- 10213422Proper usage of driver's floor mat.
- 10213421Condensation/Fog in front and rear combination lights
- 10213417Passenger fAirbag deactivation (PAD) indicator light illumination
- 10213401Mazda Service Support MX Connect MTips
- 10213399Brake noise, judder and dragging diagnosis and servicing
- 10213387Shock absorber replacement guidelines
- 10213385Stains appear on wheels
- 10213333Battery test procedure requirements using the GR81291
- 10213332Battery Maintenance
- 10213331Sulfur smell from exhaust system.
- 10213330PreMixed long life "FL22" Engine Coolant
- 10213329Engine Start /Stop Procedure with room fuse removed
- 10213326Mazda guidelines for factory scheduled maintenance
- 10209778The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10209761Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories.
- 10208567Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
Every Mazda MAZDA6 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.