1999 Nissan Sentra
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › Sentra › 1999
These records cover every 1999 Nissan Sentra. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 1999 Nissan Sentra. Newest first.
Dope, inc. IS recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on july 28, 2009. owners may contact dope, inc. At 1-626-272-1798.
Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Ck motorsport will notify owners and replace the noncompliant lamps free of charge. the recall began on july 1, 2006. owners may contact ck motorsport at 1-909-610-7211.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
Owner complaints
59 complaints14 involved a crash9 injuries
What owners report most
Latest complaints
- Electrical system · Engine
TL* the contact owns a 1999 nissan sentra. The contact stated that the vehicle stalled several times without warning. The vehicle was taken to an independent repair shop, who was not able to diagnose the failure. The contact was not included in nhtsa campaign numbers: 03v477000 (electrical system)…
TL* the contact owns a 1999 nissan sentra. The contact stated that the vehicle stalled several times without warning. The vehicle was taken to an independent repair shop, who was not able to diagnose the failure. The contact was not included in nhtsa campaign numbers: 03v477000 (electrical system), 03v455000 (engine and engine cooling), and 01v357000 (engine and engine cooling). The contact continued to experience the failure. The manufacturer was not notified of the failure. The failure mileage was not available.
- Engine · Service brakes
TL* the contact owns a 1999 nissan sentra. The contact stated that the brake lines were corroded and the check engine warning light illuminated. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was unknown.
- Tires
TL* the contact owns a 1999 nissan sentra equipped with goodyear viva 2 tires, size 175/65r14 dot number (pj8jh6hr5011). The contact stated that while driving 70 mph, there was a roaring noise coming from the driver front tire. The vehicle was taken to a private mechanic. While the tires were being…
TL* the contact owns a 1999 nissan sentra equipped with goodyear viva 2 tires, size 175/65r14 dot number (pj8jh6hr5011). The contact stated that while driving 70 mph, there was a roaring noise coming from the driver front tire. The vehicle was taken to a private mechanic. While the tires were being rotated, the technician noticed that the inside of both tires were separated. The manufacturer was notified and stated that the tire warranty had to be redeemed at the location from which the tires were purchased. The tires were not exchanged. The failure mileage on the vehicle was 155,432. The failure tire mileage was 300. .... Updated 03/08/13 *bf
- Fuel system, gasoline
TL* the contact owns a 1999 nissan sentra. The contact stated an excessive amount of fuel would overflow from the fuel tank filler neck whenever refueling. The vehicle was taken to an independent mechanic where a diagnostic test was performed and they detected the fuel tank filler neck was…
TL* the contact owns a 1999 nissan sentra. The contact stated an excessive amount of fuel would overflow from the fuel tank filler neck whenever refueling. The vehicle was taken to an independent mechanic where a diagnostic test was performed and they detected the fuel tank filler neck was completely covered with rust. The manufacturer and dealer stated the part was no longer in production as a result to the vehicle not being repaired. The approximate failure mileage was 69,000.
- Electrical system · Engine and engine cooling
There IS a recall on 2002, 2005-2006 nissan sentras & altimas with the sensor. The car can shut down without warning and engine stall. My car IS a 1999 nissan sentra with the same problem and they won't fix it because of the wrong year. Regardless of the year it should be fixed or I should receive…
There IS a recall on 2002, 2005-2006 nissan sentras & altimas with the sensor. The car can shut down without warning and engine stall. My car IS a 1999 nissan sentra with the same problem and they won't fix it because of the wrong year. Regardless of the year it should be fixed or I should receive some kind of compensation. Luckily when I was driving and my car shut down I wasn't hit from the back. I am looking to file a law suit over this matter because I spent my money on this car buying it brand new and this organization just shoved me off like my problem doesn't matter. I use my car and now I am without a car and catching the bus. It's not fair! It's their car!*cn
- Engine and engine cooling › Engine
The teeth on one of the timing chain sprockets wore down causing bent valves due to timing failure. the head will have to be removed to replace damaged parts or a new/rebuilt engine will have to be installed. *tr
- Fuel system, gasoline › Delivery › Hoses, lines/piping, and fittings
The fuel filler tank/hose on my father's 1999 nissan sentra must be replaced. However, the part IS not available form nissan; it IS no longer made and there IS no 'after market" item. He tried a 2000 part; it could not be made to fit. We have contacted nissan directly, have talked to dealers, etc.…
The fuel filler tank/hose on my father's 1999 nissan sentra must be replaced. However, the part IS not available form nissan; it IS no longer made and there IS no 'after market" item. He tried a 2000 part; it could not be made to fit. We have contacted nissan directly, have talked to dealers, etc. Without this needed repair, the car IS basically of no value. It cannot be sold, because it would not pass inspection. Complete frustration. The car itself IS great, less than 60,000 miles, no rust, excellent M[G, etc. But what can we do now/ who to complain to/ nissans response seems to be "tough luck" and there IS no recourse. *Jb
- Tires
As my wife and I traveled in the state of florida on 5-28-2007, my rear tire came apart causing my vehicle to spin 360 degrees and causing damage to my vehicle due to the incident. thank god, the traffic surrounding my car was not affected by my spinning. the damage to the car was temporarily secured by the highway road ranger and I was required to drive at very low speed on the highway to reach my destination. *Tr
- Air bags · Service brakes, hydraulic
Braking system failed to fully function. When I pressed the brake pedal to slow down, the vehicle slowed. However, as I pressed the brake pedal harder to come to a full stop, the vehicle did not respond. A two vehicle car crash resulted, and the sentra IS a total loss. The air bags did not deploy.…
Braking system failed to fully function. When I pressed the brake pedal to slow down, the vehicle slowed. However, as I pressed the brake pedal harder to come to a full stop, the vehicle did not respond. A two vehicle car crash resulted, and the sentra IS a total loss. The air bags did not deploy. The brakes were last serviced on 10-23-06. I do not trust the dealership, since I have had previous problems. I had the same supspension problems with the vehicle - tires wearing prematurely on the inside. In one instance, nissan of hickory told me there were no problems with my vehicle. After two hours, the service manager walked me into the garage, where he tried to prove the problem was my tires. I pointed to a leaking shock on my vehicle, and he was suprised and upset that I noticed it. He then told me they did not take the tires off my vehicle in the two hours I was waiting. I have no confidence in nissan of hickory to examine my vehicle because of that incident. *nm
- Exterior lighting › Headlights › Concealment devices
The plastic headlights on my 1999 nissan are opaque. The light output IS diminished at least 40%. The dealer wants $200 for replacement of plastic headlights. I then noticed that many cars that are over 5 years old have the same problem, diminished lighting due to poor plastic headlights. I hope you can get nissan and all other makes involved to replace the plastic headlights for free. *jb
- Power train › Axle assembly
Car IS vibrating and shaking in the front end, replaced set of tires then the new tires were being damaged again by the vibration. Nissan refused to check drive axles which seem to be the source of the vibration. The part looks in good condition, was inspected by a mechanic and he stated that IS the drive axle. *Jb
- Vehicle speed control
Car was being parked when sudden acceleration took over and caused the car to crash into a wall. On august 8, two women were injured. *nm
- Visibility › Windshield wiper/washer › Linkages
On my 1999 nissan sentra 1.6l,it appears that I am having the same problems with the wiper linkage assembly as on the 1996's,97's,and 98'S. There are no recalls for the 1999's! Can I get this fixed for free or what? It IS a real pain because I can't see out the drivers side window during rain or snow storms. I shouldn't have to pay for a legitimate recall as on other years. *nm
- Visibility › Windshield wiper/washer
Windshield wipers recall issued, but no parts were available. *ak
- Power train › Clutch assembly · Power train › Clutch assembly › Pedal/hand lever(motorcycle)
I was driving at night, when I noticed that my clutch had a little more "play" in the pedal than normal. I thought this was my imagination until within another 15 minutes of driving I noticed that the gears started shifting harder than normal as well. within another few minutes, the clutch pedal…
I was driving at night, when I noticed that my clutch had a little more "play" in the pedal than normal. I thought this was my imagination until within another 15 minutes of driving I noticed that the gears started shifting harder than normal as well. within another few minutes, the clutch pedal was almost all the way in, and the clutch was not releasing causing me not to be able to shift at all. I was able to pull off to the side of the road, and get the car into second gear and drive the remainder of the way home without incident. once home with the car, I inspected the clutch pedal and the clutch cable under the hood and noticed that the piece the clutch cable attaches to (the withdrawal lever) was cracked and almost completely broken in half. the car was then towed to my mechanic who informed me that after adjusting the clutch system and test driving it, he had the same problem I observed, and almost couldn't get the car back to his shop from the test drive. he informed me that the entire clutch assembly would need to be replaced as it had obviously failed, as well as the defective withdrawal lever. he found no obvious reason for the failure of the clutch and lever, other than manufacturer defect. he did not feel that the failure was the result of normal wear and tear or abuse. *ak
- Vehicle speed control
When brakes were depressed vehicle suddenly accelerated forward. *Ak
- Suspension
While driving 55 mph steering wheel vibrated. *ak
- Tires
While driving 75 mph front driver side tire blew out. no impact reported. *Ak
- Engine and engine cooling
Air conditioner sends water into the rugs inside the car. once, I intended to manipulate one of the air controls and ever since I have had this problem. I've been taking the car to the nissan service center to have this problem solved but I am told that the water pipe was drained. I have taken the car on the following dates: 5-5-01/ 1-5-02/ 5/31/02 and 5-2-03 the problem continues and IS getting worse.
- Engine and engine cooling › Engine
Timing chain and related parts wore out long before they should have.
- Electrical system · Electrical system › Horn · Exterior lighting · Service brakes, hydraulic › Antilock/traction control/electronic limited slip · Steering
I had just entered a 3-lane highway and was driving 25-30 mph in the rain at night, when the engine suddenly just stopped! I had no lights, no brakes, no horn, no steering. By some small miracle, the emergency brake stopped the car,and I had a cell phone. The police got there before anyone hit me.…
I had just entered a 3-lane highway and was driving 25-30 mph in the rain at night, when the engine suddenly just stopped! I had no lights, no brakes, no horn, no steering. By some small miracle, the emergency brake stopped the car,and I had a cell phone. The police got there before anyone hit me. Sheehy nissan service dept. Said that this IS a common occurance with sentras, and several years were recalled for defective components for the same kind of problems, but 1999 was not included. Therefore, the repairs as estimated would cost me roughly one grand. Forgot to mention that my son and baby girl were with me when the car failed on the highway. Aren't the dealers required to report this sort of thing to the manufacturer?*ak
- Electrical system › Ignition
Since soon after the purchase of the vehicle if you start the vehicle and then move it a short distance and turn it off, you can not restart it, you have to hold down the gas pedal and crank it until it starts, or wait till later to start it. sister had same model and year nissan exact same…
Since soon after the purchase of the vehicle if you start the vehicle and then move it a short distance and turn it off, you can not restart it, you have to hold down the gas pedal and crank it until it starts, or wait till later to start it. sister had same model and year nissan exact same problem. dealer said there IS nothing they can do, but it IS a common problem. now at 98K miles you turn off the car and the fan continues to run must disconnect the battery to stop it. Many electrical problems.*ak
- Electrical system
Distributor cap failed. while driving at 35 mph vehicle stalled. Dealership replaced the distributor, wires, and plugs. However, problem recurred.
- Engine and engine cooling › Engine
While driving 60-65 mph vehicle lost power/ stalled. Consumer had to coast to the side of the road to have the vehicle towed. *Ak
- Power train › Driveline › Differential unit
The consumer stated the transmission slipping from 1ST to 4TH gear. Dealer notified.*ak vehicle failed due to a worn our differential in the transmission. Vehicle was repaired but failed again. This failure was the result of an installed reconditioned torque converter. Thus, the differential was…
The consumer stated the transmission slipping from 1ST to 4TH gear. Dealer notified.*ak vehicle failed due to a worn our differential in the transmission. Vehicle was repaired but failed again. This failure was the result of an installed reconditioned torque converter. Thus, the differential was ignored. The differential broke both axles and the torque converter. Which ultimately resulted in transmission failure. *ph *jb
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235729RADIO INTERMITTENTLY REBOOTS DURING AUDIO PLAYBACK VIA BLUETOOTH CONNECTED IPHONE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192677SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulletin for further details.
- 10192513SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
- 10192305SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192233Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletinfor further detail.
- 10192217If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see NTB00-033). See this bulletin for further detail.
- 10192216SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details.
- 10192192As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
- 10192145SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
- 10188377STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10181008SENTRA/200SX A/C HIGH PRESSURE HOSE SERVICE CAMPAIGN Service Campaign ID # P9111 is no longer active. Repair orders opened after this bulletins published date are no longer eligible for reimbursement under Campaign ID # P9111. Discard all previous versions of NTB99-037.
- 10051767Nissan: lock/unlock request button on outside handle does not respond.
- 10032506Nissan: vent control valve replacement. When replacing the evap canister vent control valve for reason: use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service manuals (esm; when installing the new valve, do not add any lube to its o ring; for frontier (D40 series) only, install the protector listed in parts information. Includes 2005-09 frontier. Updated 12/8/10.
- 10031305Nissan: tire pressure monitoring system (TPMS) warning light on/flashing. No models or model years listed. Updated on 08-11-2011.
- 10030165Nissan: the 12 volt battery IS an important part of the vehicle electrical system and IS required to stay connected when the engine IS running. To prevent damage to vehicle electronic components follow the instructions/cautions. No model years listed.
- 10025522Nissan: srs precautions during service;improper maintenance, including incorrect removal and installation of the srs, can lead to a serious injury or death caused by unintentional activation of the srs on all nissan models with the srs systems. Updated 2/21/14.
- 10017473Front seat belt latch plate retaining button missing.
- 10003515Front seat belt latch plate retaining button missing.
- 631760Subject regarding revised maintenance procedures. *Slc
- 629210Seat belt latch plate retaining button missing.
- 624064Subject pertaining to revised maintenance procedures.*jb
- 613480Information regarding keyless remote entry programming.
- 609957Subject regarding a hard to start engine during high altitude and low ambient temperatures condition.
- 607942Vehicles within certain vin ranges may exhibit a horn that activates randomly.
- 607626Concerns with the front seat belt latch plate stopper button missing.
- 606571Information regarding the air conditioning (a/c) high pressure hose service campaign.
- 606243Information regarding keyless remote entry programming.
- 604788Service manual procedure change for rear oxygen sensor dtc(s) p0137, p0138, p0139, p0140, p0141 and three-way catalyst dtc p0420.
Every Nissan Sentra model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.