2008 Toyota Highlander
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Highlander › 2008
These records cover every 2008 Toyota Highlander. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
13 recalls name the 2008 Toyota Highlander. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota is recalling certain model year 2006-2008 RAV4, 2006-2010 Yaris, 2008-2010 Highlander, and 2009-2010 Tacoma, Corolla, Corolla Matrix and General Motors Pontiac Vibe vehicles. In the affected vehicles, the steering column assembly contains electrical connections to the driver's airbag module housed in a spiral cable assembly, which includes a…
Risk and remedy
Risk
If the FFC is damaged, connectivity to the driver's air bag module could be lost and the air bag deactivated. The failure of the driver's air bag to deploy in the event of a crash that typically necessitates deployment increases the risk of injury to the driver.
Remedy
Toyota will notify the Toyota vehicle owners, and General Motors will notify the Pontiac Vibe owners. Toyota sent owners an interim notification letter in May 2014 to advise owners of the recall. Toyota will mail owners a second letter when remedy parts are available. General Motors sent Pontiac Vibe owners an Interim letter on June 20, 2014 notifying them that parts are currently unavailable. General Motors sent notices to the Pontiac Vibe owners on September 15, 2014, that a remedy is available. The recall began on October 27, 2014. Owners may contact Toyota at 1-800-331-4331. Owners may contact General Motors at 1-800-762-2737.
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the…
Risk and remedy
Risk
If the switch overheats, it may melt, possibly resulting in a fire.
Remedy
Toyota will notify its owners, and dealers will inspect the switch and apply a special grease that inhibits heat build up or replace any switch damaged by the defect, free of charge. Toyota owners that experience a problem with a switch should not attempt to make repairs, but should contact their Toyota dealer or the Toyota Customer Experience Center at 1-800-331-4331. General Motors will contact the Pontiac Vibe owners affected by this recall and GM dealers will inspect and repair switches as necessary. Those owners may contact Pontiac Customer Care at 1-800-762-2737.
Toyota IS recalling certain model year 2008 highlander, highlander hybrid, and model year 2007-2008 RAV4 vehicles. in the curtain shield airbag (csa) system, there are two sensors in the airbag sensor assembly which are designed to detect vehicle roll angle. if one of these sensors malfunctions, the airbag warning light (malfunction indicator light: mil)…
Risk and remedy
Risk
Inadvertent activation of the csa and/or the seat belt pretensioner can cause injury to a vehicle occupant.
Remedy
Toyota will replace the airbag sensor assembly with a new one containing improved roll rate sensors, free of charge. toyota intends to send an interim owner notification to owners early to mid-may, 2011 when sufficient parts and remedy becomes available. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2008-2010 highlander, model year 2009-2010 corolla, venza and matrix passenger vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat. this recall IS an expansion of a campaign of 3.8 million other toyota vehicles announced…
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
Toyota will modify or replace the accelerator pedals on the subject vehicles. Floor surface modifications are also being considered and will be included for any model for which it IS deemed appropriate. Initially, dealers will be instructed on how to reshape the accelerator pedal for the repair. As replacement parts with the same shape as the modified pedal become available, they will be made available to the dealers for the repair. Customers who have had the pedal reshape remedy completed will have the opportunity to receive a new pedal if they desire, after replacement pedals become available. in addition, toyota will replace any toyota all-weather floor mat in a subject vehicle with a newly designed mat, free of charge. For those customers who have the previous design all-weather floor mat but do not need or want the newly designed all-weather floor mat, toyota will recover the previous design all-weather floor mat and reimburse its price. the safety recall began march 30, 2010. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Southeast toyota IS recalling 3,499 stainless steel exhaust tips sold by southeast toyota as an optional accessory for use on my 2008 highlander and highlander hybird vehicles. due to improper heat treatment during the manufacturing process, the original clamp used to secure the stainless steel exhaust tip to the exhaust pipe may develop microscopic…
Risk and remedy
Risk
The original clamp and the toyota stainless steel exhaust tip may fall off the vehicle's exhaust pipe and become a road hazard which would increase the risk of a vehicle crash.
Remedy
Southeast toyota will notify owners and replace the clamp free of charge. the safety recall IS expected to begin during may/june 2009. owners may contact southeast toyota customer loyalty department at 1-800-301-6859.
Toyota IS recalling 39,100 stainless steel exhaust tips sold by toyota as an optional accessory for use on my 2008 highlander and highlander hybrid vehicles. due to improper heat treatment during the manufacturing process, the original clamp used to secure the toyota stainless steel exhaust tip to the exhaust pipe may develop microscopic cracks.…
Risk and remedy
Risk
The original clamp and the toyota stainless steel exhaust tip may fall off the vehicle's exhaust pipe and become a road hazard which would increase the risk of a vehicle crash.
Remedy
Toyota will notify owners and replace the clamp free of charge. the safety recall began on may 4, 2009. owners may contact toyota customer experience center at 1 888-270-9371 monday through friday, 5:00 am to 6:00 pm, saturday 7:00 am through 4:00 pm pacific time.
Toyota IS recalling 90,189 my 2008 highlander and highlander hybrid passenger vehicles equipped with a third row seat. these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 208, "occupant crash protection." the non-driver designated seating positions (dsp) on these vehicles IS equipped with seat belt assemblies…
Risk and remedy
Risk
However, for the two third row dsp's on these vehicles, the alr mode deactivates before the webbing IS fully retracted, so that it will not lock when certain rear-facing crs's that have a short seat belt routing path are installed in the vehicle. this can allow the seat belt webbing to spool out during normal driving maneuvers, which could affect the stability of a child restraint installed at those seating positions. as such, this could discourage the use of a child restraint and in the event of a crash, the child may not be adequately protected possibly resulting in injury.
Remedy
Dealers will install a newly designed seat belt component free of charge. the recall IS expected to begin on or about december 18, 2008. owners may contact toyota at 1-800-331-4331.
Owner complaints
405 complaints44 involved a crash14 involved a fire42 injuries2 deaths
What owners report most
Latest complaints
- Air bags
We own a 2008 Toyota Highlander. The SRS airbag warning light on the dash is lit. It is a sensor issue that has been fixed once. It is a safety issue because, as I understand it, the airbags will not deploy when this warning light is on. I would like to know if this is an issue with other 2008…
We own a 2008 Toyota Highlander. The SRS airbag warning light on the dash is lit. It is a sensor issue that has been fixed once. It is a safety issue because, as I understand it, the airbags will not deploy when this warning light is on. I would like to know if this is an issue with other 2008 Highlanders. This has happened twice since we have owned the vehicle. The dealership fixed the issue the first time but has no record of the repair. This time the repair could be over $1000.00 for me to drive a safe vehicle. I believe this should be looked into to see if it is an issue with other 2008 Toyota Highlanders.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2008 Toyota Highlander. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. The contact stated that at the time of purchase the mileage was 106,000. After obtaining a Carfax report, the contact became aware that the mileage listed was 264,000.
- Engine
The contact owned a 2008 Toyota Highlander. The contact stated that while driving at approximately 20 MPH, an abnormal, booming sound was emitted from the vehicle as heavy, black smoke entered her vehicle. Due to the smoke, the contact's vision became obstructed, and the contact immediately shifted…
The contact owned a 2008 Toyota Highlander. The contact stated that while driving at approximately 20 MPH, an abnormal, booming sound was emitted from the vehicle as heavy, black smoke entered her vehicle. Due to the smoke, the contact's vision became obstructed, and the contact immediately shifted into park and jumped out of her vehicle for safety. It was unknown if there were any warning lights. As a result, the contact injured her right hip and strained her vocal cords. The vehicle quickly became engulfed in flames as authorities were called to the scene. The fire department extinguished the flames as both a fire and a police report were filed. The vehicle was towed to an independent mechanic, where it was deemed a total loss. There was no property damage. The origin of the fire was unknown, and an investigation was opened by the insurance company. The contact sought medical attention the next day and was treated for the strain on her right hip. The manufacturer was notified of the failure, and the contact was given a case number. The contact was also informed that she would receive a response from them within 45 days. The vehicle was destroyed. The failure mileage was approximately 100,000.
- Service brakes
There was no incident. When the brake malfunction screen displayed, I drove the vehicle to the nearest toyota dealer in pueblo, colorado. I received the attached service message and picking ticket; 17june2025. It also needs new brake pads, rotor adjustment, and 5 new tires. Total~$6000. Way too…
There was no incident. When the brake malfunction screen displayed, I drove the vehicle to the nearest toyota dealer in pueblo, colorado. I received the attached service message and picking ticket; 17june2025. It also needs new brake pads, rotor adjustment, and 5 new tires. Total~$6000. Way too pricy! I paid for the diagnostic test, and drove home carefully! The vehicle has been sitting in my carport since, and I am walking the city limits for all purposes. The 12V battery died mid-july, without replacement since. I live in la junta, 70 miles east of the dealer. So we're looking at 99,000 total miles as it sits.
- Electrical system · Service brakes
My 2008 Toyota Highlander Hybrid is having severe issues with the ABS system. Toyota is reporting that it needs an ABS actuator and ABS pump replacements. These were a part of Toyota's previous Customer Support Program, but the program expired before I owned the vehicle. That is EXTREMELY dangerous…
My 2008 Toyota Highlander Hybrid is having severe issues with the ABS system. Toyota is reporting that it needs an ABS actuator and ABS pump replacements. These were a part of Toyota's previous Customer Support Program, but the program expired before I owned the vehicle. That is EXTREMELY dangerous and the issue with the ABS system should be considered a Safety Recall that is ALWAYS available to Toyota customers to rectify and paid for by Toyota. It is a BRAKING ISSUE. It is not just brake pads, or normal wear and tear. This is a known issue and regardless of the timeline, Toyota should absolutely pay for the repair.
- Electrical system
The Intelligent power module failed on the vehicle. I read this is common for my vehicle however there is no recall matching my VIN. Vehicle was purchased out of state one year ago. We took the vehicle to a Toyota dealership who suggested I inquire about the issue because it’s possible this VIN should have been included.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2008 Toyota Highlander. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 123,399, and at the time of registration, it was discovered that the mileage was 271,890.
- Service brakes
Good Afternoon, The brake actuator and booster pump failed on my 2008 Toyota Highlander Hybrid. ABS, Brake, and VSC warning lights came on, and the brakes became weak and unsafe. A repair shop confirmed the issue with codes C1252, C1256, and C1391. I tried to fix it at a local shop last…
Good Afternoon, The brake actuator and booster pump failed on my 2008 Toyota Highlander Hybrid. ABS, Brake, and VSC warning lights came on, and the brakes became weak and unsafe. A repair shop confirmed the issue with codes C1252, C1256, and C1391. I tried to fix it at a local shop last year, but the problem came back. It seems this repair can only be fully done at a Toyota dealer due to software requirements. However, the dealer repair cost is very high. I cannot afford the repair or a new car right now because of family budget limits — we have three children and rely on this vehicle every day(only one car). Toyota declined to help, even though I later found this issue was once covered under Program ZKC, which I missed. The vehicle is still unsafe and available for inspection. Thank you very much for considering my issue!
- Service brakes
Brake actuator failure. Have to manually brake, stopping distance significantly increased. 3,145$ to replace at Toyota dealership.
- Service brakes
In June 2019, Toyota issued a recall for ABS malfunction, diagnostic code C1391 - brake actuator and accumulator. New parts were issued by Toyota in 2019 as part of the recall. My vehicle experienced ABS malfunction, diagnostic code C1391 in March 2022 and was repaired by Toyota with the new and…
In June 2019, Toyota issued a recall for ABS malfunction, diagnostic code C1391 - brake actuator and accumulator. New parts were issued by Toyota in 2019 as part of the recall. My vehicle experienced ABS malfunction, diagnostic code C1391 in March 2022 and was repaired by Toyota with the new and improved parts issued as part of the recall. As of October 14, 2024, my vehicle is experiencing the same issue again - ABS brake malfunction diagnostic code C1391, with the brake system light, master warning light, abs light and ABS Malfunction warning noted on the screen. The vehicle can be inspected. Toyota has inspected and confirmed it is the same issue again. The new and improved parts from 2019 should not fail within 20,000 miles. Toyota did confirm that they used the new parts issued as part of the recall and cannot explain why they failed faster than the original parts causing dangerous braking issues.
- Service brakes
We were driving at about 40 MPH and approached our turn. When I depressed the brakes, they felt spongy and I had trouble slowing quickly. The yellow triangle illuminated on the dash and a long warning beep sounded. I was able to get safely parked in a parking lot, and my son came and took a look…
We were driving at about 40 MPH and approached our turn. When I depressed the brakes, they felt spongy and I had trouble slowing quickly. The yellow triangle illuminated on the dash and a long warning beep sounded. I was able to get safely parked in a parking lot, and my son came and took a look as well. We had the car towed to a shop, who diagnosed the problem, stating that we needed to replace the brake booster pump and actuator assembly. A family member noted that Toyota had issued a recall for vehicles with the same year/make/model for the braking system, so we had it towed to our local Toyota dealership to verify that they had no open recalls on the brakes and complete a full inspection otherwise. They validated that the brake booster pump and actuator assembly needed to be replaced. I am left wondering why my vehicle was not included in Toyota's recall.
- Service brakes
There was a customer support program from Toyota for certain Highlander from 2008 to 2010. The deadline was in 2020. The same issue started for me three weeks ago. Local Toyota Service center confirmed that it is the same code and issue but quoted me over $3000 to replace the whole thing. Since…
There was a customer support program from Toyota for certain Highlander from 2008 to 2010. The deadline was in 2020. The same issue started for me three weeks ago. Local Toyota Service center confirmed that it is the same code and issue but quoted me over $3000 to replace the whole thing. Since Toyota admitted that this is a faulty part and had support program to replace the parts, there should not be expiration date on the support program. This issue can only be fixed by Toyota Service center since it requires specialized tool and software. Customer should not be forced to pay the excessive fees because Toyota used faulty parts in the beginning.
- Service brakes
The brake pedal gave no resistance, going right to the floor. The ABS system warnings lit up on the dashboard at the same time. I was able to pull the car over safely, but it was not driveable and needed a tow to a repair shop. The repair shop noted that the brake actuator assembly and skid module…
The brake pedal gave no resistance, going right to the floor. The ABS system warnings lit up on the dashboard at the same time. I was able to pull the car over safely, but it was not driveable and needed a tow to a repair shop. The repair shop noted that the brake actuator assembly and skid module failed and needed replacement. after doing research we are confident the issue IS exactly as hundreds of other owners have previously reported to toyota, bbb, and nhtsa. Toyota has since issues recalls and warranty extensions for the other toyota hybrid model that utilize the same platform/system but just not for the later 2008 highlander hybrid. Someone needs to step up and hold toyota accountable for the same faulty parts they continued to install in their other hybrid vehicles they sold to consumers. The ABS system IS clearly not functioning properly as hundreds of consumers have previously noted. Why would toyota cover the cost of repair for other hybrids with this same defect but not others? There needs to be a recall or warranty extension issued for this model/year as toyota has issued for other hybrid models using the same platform. This IS clearly a well-documented problem for the 2008 models.
- Service brakes
Intermittent warnings "Check ABS", "Check Brake System", "Check VSC System" have been showing up on the vehicle display along with the brake and traction control warning lights. This has been happening on and off for several months. Diagnostic Trouble Code reader shows "C1391 Abnormal Leak of Accumulator pressure".
- Engine
The engine burns Coolant and yet doesn't overheat. The engine on cyl 4 misfires. Changing the head gasket didn't repair the issue, replacing all fuel Injectors and ignition parts didn't either. Heads inspected and passed. Compression testing passed. Always misfires on cyl 4. No repair aside from an…
The engine burns Coolant and yet doesn't overheat. The engine on cyl 4 misfires. Changing the head gasket didn't repair the issue, replacing all fuel Injectors and ignition parts didn't either. Heads inspected and passed. Compression testing passed. Always misfires on cyl 4. No repair aside from an ecu reflash or replacement seems to be possible. 4 shops looks at it and couldn't find any reason why it was misfiring and no traces of water were found in the interior, on the floor, in the oil or exhaust in the cooling system.
- Seat belts · Unknown or other
The ECU requires a reflash or replacement. The hybrid batteries over heat and regen braking randomly shuts off during braking or before/after due to overheating becuswe the cooling fans do not engage past level 1 or 2. The fans in fact never go full speed unless commanded by a Toyota service tech…
The ECU requires a reflash or replacement. The hybrid batteries over heat and regen braking randomly shuts off during braking or before/after due to overheating becuswe the cooling fans do not engage past level 1 or 2. The fans in fact never go full speed unless commanded by a Toyota service tech via the software during fan testing. Upon testing I noticed they not once went high enough to be audible and thus overheated. Manu forms indicate this is a common issue and requires 180-$300 for a reflash and/or replacement of the compu) ECU to alleviate this issue. Second issue I've found is the 3rd row seat belts just like some other MY Highlanders have their restraints cut at the shackle holding them to the body of the vehicle. I have seen several sheered this way including my own vehicle.
- Electrical system · Service brakes
Myself, and many other 2008 Toyota Highlander Hybrid owners, have a vehicle code labeled C1391 "Leak in Accumulator" wherein the vehicles brake actuator and brake booster pump malfunction. The dash of my vehicle has the following indicators on; Check ABS, Check Brake System, Check VSC System…
Myself, and many other 2008 Toyota Highlander Hybrid owners, have a vehicle code labeled C1391 "Leak in Accumulator" wherein the vehicles brake actuator and brake booster pump malfunction. The dash of my vehicle has the following indicators on; Check ABS, Check Brake System, Check VSC System, Yellow Master Warning Light, Red Brake System Light & Buzzer, Yellow ABS Warning Light, and Yellow Slip Indicator Light. This has been a significant cause of concern for me over the past two-three years since purchasing this vehicle. This is a known issue throughout the Toyota Highlander Hybrid community and the dealership is not upholding their previous recall which occurred in late 2019 and ended in 2020, after I had purchased the vehicle. The cost of repairs is upwards of $4,000 and Toyota has not given the proper opportunity for recall repairs to owners. This is a significant safety issue because if the brakes fail, a severe crash may injure myself or others. The problem has been reproduced by several other owners, dealerships, and independent service centers (this is a well known and common issue). This vehicle is available for inspection if requested. I plead that you please insist on Toyota reopening their recall to provide service to the owners of this vehicle, this is an issue with their manufacturing and not on the owners/operators. This problem occurred immediately after receiving scheduled maintenance to my vehicle from a certified Toyota Dealership, whom have quoted me the above cost for repairs and may have caused the issue in the first place.
- Structure
The contact owns a 2008 Toyota Highlander. The contact stated while driving at various speeds, the front end of the vehicle was making an abnormal clunking sound. The vehicle was taken to an independent mechanic, where it was diagnosed that the entire subframe was severely corroded and needed to be…
The contact owns a 2008 Toyota Highlander. The contact stated while driving at various speeds, the front end of the vehicle was making an abnormal clunking sound. The vehicle was taken to an independent mechanic, where it was diagnosed that the entire subframe was severely corroded and needed to be replaced. The vehicle was not repaired. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 175,000.
- Air bags · Seat belts
I was in a car accident yesterday two cars hit me from behind my daughter was in the third row and my other kids in the second row. The air bags didn't deploy and my daughters seatbelt in the third row didn't lock when the cars impacted my vehicle her seat belt kept going forward with her. Also my seat belt unlocked and came off upon impact of car
- Service brakes
Brought this sport utility truck from a dealership out of Sandersville, Geogia in 2018. Never had an issue with this vehicle. All services are done in the dealership. It previously has 168k mileage. I have always heard sounds from as i have learned is the ABS motor\pump system since purchasing the…
Brought this sport utility truck from a dealership out of Sandersville, Geogia in 2018. Never had an issue with this vehicle. All services are done in the dealership. It previously has 168k mileage. I have always heard sounds from as i have learned is the ABS motor\pump system since purchasing the vehicle in 2018, but never any issues. Now November 2023 this ABS situation has my whole dashboard lit up. This got full attention due we were traveling when this occurred to us telling me to stop the vehicle, pull over, shut the car off and contact a dealer. We exited the freeway at a gas station to see what the matter was about. I didn't since any tightness in the brake pedal so I drove back home to be safe. Warning messages read: Check VSC System, BRAKE Malfunction, Cheak Brake , Check ABS. I have not been able to get it fix due to the cost of the repair on an issue Toyota already knew about. It's our brakes Toyota. Has money over ridden the performance of these vehicle's? Safety for the customer is first, I thought.
- Service brakes
I own a 2008 Highlander Hybrid Limited. The ABS actuator and assembly have gone bad. The following dash lights are illuminated: ABS, VSC, brake warning, and parking brake. The issue has been confirmed by toyota dealer. This defect has been reported HUNDREDS of times and Toyota has yet to issue a…
I own a 2008 Highlander Hybrid Limited. The ABS actuator and assembly have gone bad. The following dash lights are illuminated: ABS, VSC, brake warning, and parking brake. The issue has been confirmed by toyota dealer. This defect has been reported HUNDREDS of times and Toyota has yet to issue a recall for 2008 and above models. In 2019 there was a Customer Support Program Bulletin(CUSTOMER SUPPORT PROGRAM BULLETIN (ZKC): REPAIR COVERAGE FOR BRAKE ACTUATOR ASSEMBLY AND BRAKE BOOSTER PUMP ASSEMBLY ON CERTAIN 2008-2010 MY HIGHLANDER HYBRID VEHICLES) stating, " Toyota is providing coverage for repairs related to the certain internal malfunctions of the brake booster assemblies. One or more of the following specific Diagnostic Trouble Codes (DTCs) C1391, C1252, C1256 or C1253 will be stored in the vehicles memory to be used as verification." This 'customer support' bulletin was published June 6TH, 2019 and revised August 28TH, 2019. The bulletin continues, "Primary Coverage offers the Customer Support Program until December 31, 2020, regardless of mileage. After the Primary Coverage, the Secondary Coverage is applicable for 10 years or 150,000 miles from the vehicle’s date of first use, whichever occurs first." However, as this document clearly states that the affected and covered vehicles range from those manufactured in the years 2008-2010, the owners of a 2008/2009 model would only be eligible for primary coverage; allowing only about 1 year and 7 months for possible brake failure before a customer could file a claim for repair under warranty. Without any coverage the total cost for repair amounts to +$3,000.00(.) Seeing as this is an issue with Toyota manufacturing it seems that Toyota is much more concerned with keeping their money instead of preventing injury by issuing a recall and taking care of their customers.
- Service brakes
This exact issue has occurred before and was already recalled and repaired. The issue is the brake system malfunctions and the vehicle information center states to take vehicle to dealership for repair immediately. Brakes can fail and multiple warning system are displayed.
- Air bags · Electrical system
Air bag lights continue to show. Vehicle had not been in any accidents. Seat warms do not work light comes on when you turn them on. Driver window will go up half way occasionally. Back wiper motor makes loud noise and doesn’t work anymore. Tire sensor also comes out.
- Electrical system · Steering · Vehicle speed control
My 2008 toyota highlander gas pedal must be lose.because I barley push the gas and it takes on fast.i was driving home on the highway and the truck just died .the battery dies I couldn't turn my wheel I could not press the break
- Service brakes
I checked by local car repair shop found out failure code C1391. Mean- Brake Actuator Assembly fault. Recall program ended already by 2020. But is not my mistake, i every time on time change oil, tire, brake pads and do State inspection. this is Part defect from beginning some cars failing low…
I checked by local car repair shop found out failure code C1391. Mean- Brake Actuator Assembly fault. Recall program ended already by 2020. But is not my mistake, i every time on time change oil, tire, brake pads and do State inspection. this is Part defect from beginning some cars failing low mileage some failing after. This is whole part failure only by Toyota Hybrid vehicles. This repair only done by Toyota dealership because of Toyota software to install. Repair cost about 3500$ and i can't afford this repair cost i have 3 children 6years, 3years, 10 month old. Dangerous to drive with kids. Toyota USA already denied my request. Sincerly, [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Steering Column Separation
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given…
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Upper Steering Column Separation
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle…
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211829DD: Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint Toyota has added approximately 430,700 2008 ? 2018 model year Highlander and Highlander Hybrid vehicles to this Customer Support Program
- 10211828DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10211827TI: Technical Instructions Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
Every Toyota Highlander model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.