2016 Toyota Highlander

Recalls

3 recalls name the 2016 Toyota Highlander. Newest first.

• Electrical system

  Nov 27, 2018NHTSA 18E1070008,202 vehiclesEquipment

  Fujian Wanda Automobile Glass Industry (Wanda) is recalling certain aftermarket Replacement Windshields sold for use in 2014-2018 Toyota Highlander vehicles. The windshields have an attached wire harness that water may leak into, possibly causing damage to the vehicle's Engine Control Module (ECM).

  Risk and remedy

  Risk

  The ECM damage may result in the engine stalling, increasing the risk of a crash.

  Remedy

  Wanda will notify owners, and service centers will replace the windshields, and inspect the ECM for damage, having it replaced, as necessary, free of charge. The recall began January 29, 2019. Owners may contact Wanda customer service at 1-864-281-2760.

  Full recall details →

• Electrical system › Wiring

  Oct 24, 2016NHTSA 16V7750007,056 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2016 Highlander vehicles manufactured May 26, 2016, to September 16, 2016. The brake fluid level sensor may not be connected to the wire harness, preventing the sensor from detecting the brake fluid level. As such, these vehicles fail to comply with the requirements of…

  Risk and remedy

  Risk

  If the brake fluid level is low and is not detected, the braking performance may be decreased, increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will inspect and, as necessary, connect the wire harness to the sensor, free of charge. The recall began November 14, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this G03.

  Full recall details →

• Equipment › Other › Labels

  Jun 9, 2016NHTSA 16V4200004,253 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2016 Toyota Camry and Highlander, 2015-2016 Toyota Tundra, Scion FR-S, and tC vehicles. The Load Carrying Capacity Modification Label may not reflect the correct added weight of the installed accessories. As a result, these vehicles fail to comply with the requirements of Federal…

  Risk and remedy

  Risk

  An incorrect label may lead an owner to overload the vehicle, increasing the risk of a crash.

  Remedy

  SET will notify owners, and provide a corrected label for placement over the inaccurate label, free of charge. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226.

  Full recall details →

Owner complaints

What owners report most

1. Unknown or other21
2. Service brakes19
3. Electrical system14
4. Air bags10
5. Exterior lighting9
6. Engine9
7. Visibility/wiper7
8. Tires7
9. Steering6
10. Forward collision avoidance4

Latest complaints

• Oct 1, 2026MA1 injury
  Seat belts
  The component involved was the vehicle's seat belt/restraint system. While my daughter was wearing the seat belt, it became stuck around her waist/abdomen and became extremely tight. The belt continued to tighten and would not loosen or release normally. The seat belt had to be cut in an emergency…

  The component involved was the vehicle's seat belt/restraint system. While my daughter was wearing the seat belt, it became stuck around her waist/abdomen and became extremely tight. The belt continued to tighten and would not loosen or release normally. The seat belt had to be cut in an emergency to free my daughter. My daughter was sitting in the second row to the right. The seat belt became stuck and extremely tight around her waist/abdomen. After she moved the shoulder portion of the seat belt behind her shoulder and then unbuckled the seat belt. Even after she unbuckled it, the belt did not loosen or release. Instead, belt continued retracting/tightening and pulled her body upward toward the seat-belt anchor point. It pulled her upward until her stomach/abdomen was near the point where the seat belt comes out of the vehicle. Her neck/head became pressed against the vehicle roof, her feet remained on the seat, leaving her body hanging from the belt. She was screaming that she could not breathe. We had to cut the seat belt off to free her then took her to ER Due to visible bruises. The problem has NOT been reproduced or confirmed by a dealer or independent service center. I contacted IRA Toyota dealer @ Danvers Mass and specifically requested that they inspect the seat belt, but they refused. I also contacted Toyota Corporate and requested an inspection, but they refused because the vehicle is outside of its warranty period. The vehicle/component has NOT been inspected by the manufacturer, dealer, police, or insurance company, to my knowledge. Toyota Corporate and the dealer were notified of the incident but did not inspect the seat belt. There were no warning messages that I noticed before the incident. The first symptom was when the seat belt became stuck and began tightening around my daughter's waist/abdomen. The belt continued to tighten and could not be released normally. UNKNOWN as to what caused the seat belt to malfunction.

• Sep 10, 2026MS70,200 mi
  Exterior lighting › Tail lights
  The contact owns a 2016 Toyota Highlander. The contact stated that while the vehicle was parked, the rear taillight covers cracked due to the high outdoor temperatures, and there was condensation inside the taillight housing. The vehicle was taken to a dealer where it was determined that the rear…

  The contact owns a 2016 Toyota Highlander. The contact stated that while the vehicle was parked, the rear taillight covers cracked due to the high outdoor temperatures, and there was condensation inside the taillight housing. The vehicle was taken to a dealer where it was determined that the rear taillight covers needed to be replaced. The vehicle was then taken to an independent mechanic, where it was determined that the rear taillight covers needed to be replaced. The failure mileage was 70,200.

• Feb 22, 2026GA
  Steering

  Steering column can become worn prematurely causing loose steering and possibly loose control

• Feb 5, 2026FL
  Steering
  I was on Hwy 27 headed south bound at Bellecita Rd in Davenpoerrt, Fl. This is a busy four way intersection. I moved into the left hand turn lane. When the left turn green light came on I began my U-Turn to head north bound. The steering wheel would not respond to my input and the vehicle kept…

  I was on Hwy 27 headed south bound at Bellecita Rd in Davenpoerrt, Fl. This is a busy four way intersection. I moved into the left hand turn lane. When the left turn green light came on I began my U-Turn to head north bound. The steering wheel would not respond to my input and the vehicle kept going straight into oncoming traffic. It took a great deal of bodily force to get the vehicle to respond. When it did respond there was loud popping noise. I had noticed in the past, that when Iwas turning or changing lanes on the hwy, the steering had a small glitch before it centered. I thought this was strange but figured this was normal for this vehicle. This incident left me badly shaken. I thought for the grace of God that I was not involved in a serious , possibly deadly accident. I've lost my confidence in the vehicle and the brand. I will be taking it to a Toyota dealer to get it diagnosed the first chance I get.

• Jan 20, 2026MACrash
  Power train · Wheels
  I was driving on a 2-lane road early in the morning with light snowfall. There was about 1" of snow on the road, with the roads not yet plowed or treated as it was the beginning of the snowfall. About 15 minutes into my trip, I was on a relatively flat and straight stretch of the road and let up…

  I was driving on a 2-lane road early in the morning with light snowfall. There was about 1" of snow on the road, with the roads not yet plowed or treated as it was the beginning of the snowfall. About 15 minutes into my trip, I was on a relatively flat and straight stretch of the road and let up on the gas paddle to avoid going too fast -- was probably traveling ~35 mph. Although the road was straight and flat at that point, my car suddenly started fishtailing, slowly turned 180 degrees and sliding to the other side of the road, ending up on the opposite edge of the road. When it hit the edge of the road, it tipped over on its right side, as apparently the dirt at the edge of the road was not as slippery as the road, and the SUV having a high center of gravity. Since my car was an AWD hybrid vehicle, I believe that the triggering event was the vehicle shutting down the gas engine and switching to EV mode when I started coasting (that usually happens when I'm driving <40 mph and the vehicle is sufficiently warm). But I did not look at the dashboard to see if the EV mode switched on at that point. In addition, while I did not sense any skidding prior to this event, it's possible that there may have been a slick spot right at that point in the road. But it seemed to me that when the power to the front wheels was reduced from the gas engine shutting down (as I believe was the case), the transition to electric motors taking over the front drive created some perceived traction issues which triggered the electric motors in the back to try to compensate for the perceived traction issues in the front. But the rear drive ended up creating a significant differential where the right rear wheel was driving much harder than the left rear wheel, creating the car spin and slide, which the traction control did not correct. I did not apply the brakes nor gas once the car started skidding. The car was 10 years old and was a total loss as a result of tipping on its side.

• Nov 20, 2025WI
  Tires
  **Nature of Safety Defect Within 13,000 miles of normal mixed highway and light off-road use on a Toyota Highland, one tire developed a sidewall bubble and all four tires exhibited extreme and uneven tread wear—far below the advertised 50,000-mile treadwear warranty. The remaining tread depth on…

  **Nature of Safety Defect Within 13,000 miles of normal mixed highway and light off-road use on a Toyota Highland, one tire developed a sidewall bubble and all four tires exhibited extreme and uneven tread wear—far below the advertised 50,000-mile treadwear warranty. The remaining tread depth on all four tires is already under 2/32" in multiple locations, with severe cupping and feathering that makes the vehicle vibrate violently above 50 mph and causes unpredictable handling, especially in wet & snowconditions. These conditions render the tires objectively dangerous and unfit for continued highway or street use. Manufacturer Response Pirelli warranty claim #2194927 was summarily denied as “impact damage” with no physical inspection. Pirelli has refused any prorated adjustment, replacement, or refund, and has kept possession of the failed tire. On November 17, 2025, Pirelli Consumer Affairs closed the case stating: “Pirelli considers this claim to be closed and will not take any further action regarding the claim or the subject tires.” Request to NHTSA I am asking the National Highway Traffic Safety Administration to open a formal defect investigation into the Pirelli Scorpion All Terrain Plus line for: Premature and excessive tread wear (tires effectively worn out in under 13,000 miles vs. 50,000-mile rating) Widespread reports of sidewall bubbles and sudden structural failures Potential violation of Federal Motor Vehicle Safety Standards relating to tire strength, endurance, and treadwear labeling (49 CFR Part 571.139 and Part 575) These tires present a clear safety hazard—severe uneven wear and structural defects can lead to loss of vehicle control, hydroplaning, or catastrophic blowouts. Hundreds of owners have posted identical failures online in the past 18–24 months. Please investigate this tire model for possible safety recall or enforcement action. I am happy to provide the tires, in

• Oct 27, 2025WACrash1 injury
  Air bags · Unknown or other
  I was traveling on an interstate going home from work. My speed was approximately 65mph. I noticed traffic slowing up ahead. I began to drop my speed (cost down), as I was approaching the traffic the car in front of me was applying their brakes; I had already began to apply mine. I was applying…

  I was traveling on an interstate going home from work. My speed was approximately 65mph. I noticed traffic slowing up ahead. I began to drop my speed (cost down), as I was approaching the traffic the car in front of me was applying their brakes; I had already began to apply mine. I was applying more pressure to my brakes to slow down more as the person in front of me began to slow more quickly. The person in front of me then had to slam their brakes on and I was not able to stop in time to avoid collision with the car in front of me. That driver did not come in contact with any other vehicle. The impact was at approximately 50mph. I was then very quickly hit from behind by the car behind me. The vehicle behind me hit of center and more on the right back corner of my car. My vehicle sustained significant front-end damage; the hood was folded, the grill was gone, the radiator was pushed back. As I looked up after the impact and saw my hood folded I then noticed that my air bag had not gone off. How could the air bag have not gone off in an impact such as that. My safety was compromised by the possibility of hitting the steering wheel or worse such as impacting the windshield if the crash had been worse. I do not remember if my vehicle had side curtain air bags as well. NO air bags deployed. Law enforcement was called by the driver of the car I rear ended as we agreed that she would. The driver of the vehicle that hit me I believe also called 911. Highway Patrol responded along with state incident response vehicles to protect the scene. I have filed a claim with my insurance, and the vehicle was looked at and deemed a total loss. It is not available for inspection and was taken to a salvage yard per the insurance company. I did not notice any lights on on the dash after. I also did not encounter any issues before this. I had the vehicle just over a year.

• Aug 15, 2025CA
  Tires
  P245/55R19 103T Nitto Crosstek2 BW. Vehicle pulls to different directions when the tires are cross swapped. I have taken the vehicle to 4 to 5 wheel alignments within 3 months and 3 different shops after the purchase of the tire. Recently I took the vehicle Big O Tires and they _verified the tires…

  P245/55R19 103T Nitto Crosstek2 BW. Vehicle pulls to different directions when the tires are cross swapped. I have taken the vehicle to 4 to 5 wheel alignments within 3 months and 3 different shops after the purchase of the tire. Recently I took the vehicle Big O Tires and they _verified the tires have "Radial Pull" / Tire Conicity due to Manufacturing Defect of the a belt separation within the tire's structure. _The shop also verified that the alignment is performed correctly. I believe those tire are unsafe and they could fail suddenly causing crash.

• May 13, 2025MD
  Forward collision avoidance › Automatic emergency braking · Forward collision avoidance › Warnings
  On multiple (3-5), but not all, occasions at the same location my pre collision warning and automatic breaking appear to have been triggered as I approached an expansion plate at the edge of a bridge. The pre collision warning sounded, then the brakes were automatically applied. After a few…

  On multiple (3-5), but not all, occasions at the same location my pre collision warning and automatic breaking appear to have been triggered as I approached an expansion plate at the edge of a bridge. The pre collision warning sounded, then the brakes were automatically applied. After a few seconds the braking stopped and my car proceeded normally. If a car had been following closely I may have been struck in the rear.

• Jan 13, 2025GA61,000 mi
  Tires
  The contact owns a 2016 Toyota Highlander equipped with Cooper Tires, Tire Line: Evolution H/T, Tire Size: 245/55/R19, DOT Number: UPPIILE. The contact stated that while his wife was driving approximately 55-65 MPH, the rear driver's side tire unexpectedly had a blowout. The contact's wife pulled…

  The contact owns a 2016 Toyota Highlander equipped with Cooper Tires, Tire Line: Evolution H/T, Tire Size: 245/55/R19, DOT Number: UPPIILE. The contact stated that while his wife was driving approximately 55-65 MPH, the rear driver's side tire unexpectedly had a blowout. The contact's wife pulled over to the side of the road. The contact arrived on the scene and replaced the rear driver's side tire with the spare tire. The vehicle was taken to a tire retailer, where it was determined that the tire blowout was caused by a road hazard. The tire was not replaced. The tire manufacturer was made aware of the failure. The tire failure mileage was 30,000. The vehicle failure mileage was 61,000. The VIN was unavailable.

• Dec 16, 2024MD
  Engine
  The water pump on my 2016 Toyota Highlander XLE disintegrated while I was driving in heavy traffic. The pulley came loose from the water pump shaft. I have the water pump. Our safety was at risk because this happen in heavy traffic and it could have effected my control of the vehicle if it had…

  The water pump on my 2016 Toyota Highlander XLE disintegrated while I was driving in heavy traffic. The pulley came loose from the water pump shaft. I have the water pump. Our safety was at risk because this happen in heavy traffic and it could have effected my control of the vehicle if it had came off completely. The pulley was wedge between the wheel well and fame. I sent a claim to Toyota and it was rejected due to the vehicle be out of warranty. I'm saying this is a manufacturing defect. No warning before it happen.

• Dec 2, 2024IACrash
  Service brakes
  The contact owned a 2016 Toyota Highlander. The contact stated that while driving at an undisclosed low speeds on a decline, the brake pedal depressed all the way to the floorboard. As a result, the vehicle rolled downhill into a busy intersection and was struck by another vehicle on the passenger…

  The contact owned a 2016 Toyota Highlander. The contact stated that while driving at an undisclosed low speeds on a decline, the brake pedal depressed all the way to the floorboard. As a result, the vehicle rolled downhill into a busy intersection and was struck by another vehicle on the passenger side door. The air bags did not deploy. No warning lights were illuminated. The vehicle was towed to a tow yard and deemed at total lose by the contacts insurance provider. A police report was filed with no injuries reported. The manufacturer was notified of the failure; a case was opened, and the contact was referred to the NHTSA hotline for assistance. The failure mileage was 62,000.

• Nov 20, 2024WA48,000 mi
  Electrical system · Latches/locks/linkages
  The contact owns a 2016 Toyota Highlander. The contact stated that while the vehicle was parked, the trunk power switch failed to function as intended. The contact stated that the trunk power switch was enabled to unlock, however the trunk door did not unlock. The contact stated that the trunk…

  The contact owns a 2016 Toyota Highlander. The contact stated that while the vehicle was parked, the trunk power switch failed to function as intended. The contact stated that the trunk power switch was enabled to unlock, however the trunk door did not unlock. The contact stated that the trunk power switch failed to unlatch the trunk door and the trunk door was stuck. The vehicle was taken to an independent mechanic where it was diagnosed with battery failure due to a lack of voltage. The contact was informed that the battery needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The contact stated that the failure reoccurred intermittently. The manufacturer was made aware of the failure. The contact stated that a Representative provided remedy options over the phone. The contact stated that the failure reoccurred intermittently. The failure mileage was approximately 48,000.

• Aug 24, 2024NC
  Structure › Body

  The driver side rear passenger door can not be opened,either by remote or manually. This poses a threat to the safety of passengers in the rear seat area in the event of a crash. First responders would need to take other measures to tend to any injured passengers.

• Jan 10, 2024VA64,000 mi
  Visibility

  The contact owns a 2016 Toyota Highlander. The contact stated that while driving approximately 20 MPH, the front right passenger's side view mirror suddenly fractured. The vehicle had not been taken to the dealer. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 64,000,

• Dec 26, 2023NC
  Electrical system · Engine
  2016 toyota highlander le model v-6 cylinder. The FUEL PUMP runs after engine has been turned off for several hours, even up to as many as 8 hours. This situation can be heard in a closed in garage, in the completely quiet of night time, and at multiple times during the same time period. It…

  2016 toyota highlander le model v-6 cylinder. The FUEL PUMP runs after engine has been turned off for several hours, even up to as many as 8 hours. This situation can be heard in a closed in garage, in the completely quiet of night time, and at multiple times during the same time period. It happens intermittently with various levels of gas in the tank. The length of time FUEL PUMP can run can be as little as 10 minutes to over 60 minutes.

• Nov 6, 2023PACrash
  Visibility/wiper
  The side view mirrors are positioned in a way that completely blocks visibility on the sides of the car, especially when making a left-hand turn. After owing the vehicle for several weeks, I collided with another car when making a left-hand turn. I couldn't see the car when turning until it was too…

  The side view mirrors are positioned in a way that completely blocks visibility on the sides of the car, especially when making a left-hand turn. After owing the vehicle for several weeks, I collided with another car when making a left-hand turn. I couldn't see the car when turning until it was too late. I've been driving for 30+ years and have never had an accident before. I had another close call several weeks ago, and my husband almost didn't see a pedestrian because of the visibility issue. I looked up the problem online and see that many other have had this same problem. Please look into it. I called Toyota but they don't have a recall and said they couldn't help. I plan to change out my side view mirrors but wanted to bring this to your attention so that no one gets hurt by this issue. Thank you.

• Oct 30, 2023CA
  Suspension

  Had cv boot and control arm work at 30k miles caught it in time in 2021 and dealer fixed it. 2 years later same issue if i had bot taken it to dealer and just did oil changes myself cv boot and control arm would break during operation. Seems like they have serious issues with cv boots and control arms at low miles. I only have 50k miles to have a second replacement.

• Aug 23, 2023ILCrash1 injury
  Air bags · Forward collision avoidance › Automatic emergency braking · Service brakes
  I have had problems with the brakes since I bought the vehicle new in 2016. I have the brakes checked every year and when I had problems but they never found the problem why the brakes do not work. The worse accident was on November 19, 2022 when my wife was using the car. She was in the car…

  I have had problems with the brakes since I bought the vehicle new in 2016. I have the brakes checked every year and when I had problems but they never found the problem why the brakes do not work. The worse accident was on November 19, 2022 when my wife was using the car. She was in the car alone. She went to brake and the brakes did not engage, she slammed on the brakes 4 times and the car did not even slow down and she rear-ended the car in front of her. The air bags did not engage and she was injured. The brakes do not always work, I have gone through stop signs and red lights but the dealership says there is no problem.

• Jun 13, 2023IL
  Air bags · Forward collision avoidance › Automatic emergency braking · Service brakes

  brakes did not work in January 13, 2023 when backing out of driveway. Have had numerous dealership look at it multiple times in last 4 years.

• Mar 16, 2023CA
  Electrical system
  Description of Problem (electrical issue affecting multiple systems): Engine shuts off while driving. All instrument/electronic displays shut off or flicker while driving. Steering wheel locks and vibrates. Liftgate does not open. Vehicle cannot be unlocked with fob. Vehicle does not start. May…

  Description of Problem (electrical issue affecting multiple systems): Engine shuts off while driving. All instrument/electronic displays shut off or flicker while driving. Steering wheel locks and vibrates. Liftgate does not open. Vehicle cannot be unlocked with fob. Vehicle does not start. May start after several attempts. Safety: My family's safety was put at risk when car stalled and almost hit by other vehicles while driving on streets and highway. Risk has continued because Toyota has not identified and fixed the problem. Dealer: The problem has been reproduced by dealer. Dealer blamed and replaced battery, but problem continued. Vehicle only inspected by dealer and nobody else. Warning Lamps/Message: No Service lights or warning messaged on.

• Nov 15, 2022NJ
  Structure › Body

  Driving on highway and sunroof exploded. sounded like a gun shot.

• Jul 20, 2022KY
  Exterior lighting

  The tail lights on the back tailgate hatch are leaking and have been leaking. The leaks are getting progressively worse and the lights are filling up with water. The vehicle has been garage kept, has low mileage, and has never been wrecked. I feel like this is a manufacturer defect.

• Jun 16, 2022ILCrash
  Service brakes
  2 years ago I pulled my car, that was backed into the driveway out to turn it around to face in to the garage. As I pulled forward going very slowly I pressed on the brakes and the rubber pad on the pedal came off and caused my foot to come off of the pedal. I hit my wife's car and caused some…

  2 years ago I pulled my car, that was backed into the driveway out to turn it around to face in to the garage. As I pulled forward going very slowly I pressed on the brakes and the rubber pad on the pedal came off and caused my foot to come off of the pedal. I hit my wife's car and caused some slight damage to my car and to hers. I contacted Toyota and they had my car inspected and gave me a report that the brakes worked fine. I have not replaced the rubber pad, because I am afraid the cover will come off again in a similar matter. I explained this to Toyota but they closed the case of my complaint. I believe this is a danger that can cause an accident.

• Jun 6, 2022NH
  Tires
  Cooper Adventurer P245/60R18 tires. Three of four tires had sidewall separation on both inner and outer sidewalls in same area. A separation could be seen in the outer casing about .25" above the rim line radiating and following the rim line. Tires were also exhibiting constant minor air leakage…

  Cooper Adventurer P245/60R18 tires. Three of four tires had sidewall separation on both inner and outer sidewalls in same area. A separation could be seen in the outer casing about .25" above the rim line radiating and following the rim line. Tires were also exhibiting constant minor air leakage through the sidewalls. Testing indicated no punctures in the tread areas of the tires. Tires were inspected and found defective and replaced by tire dealer. Dealer took photos of the tires and one was retained for further inspection.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
• 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
• 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10224102TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220177TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled.
• 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process

Every Toyota Highlander model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.