2011 Toyota Highlander
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Highlander › 2011
These records cover every 2011 Toyota Highlander. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2011 Toyota Highlander. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Owner complaints
181 complaints14 involved a crash8 injuries
What owners report most
Latest complaints
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Toyota Highlander. It was discovered that there was a mileage discrepancy. The vehicle was a private sale but contacted by a dealer. At the time of purchase, the vehicle mileage was 122,000, and at the time of registration, it was discovered that the mileage was 303,000.
- Engine · Power train · Unknown or other
1. The 3.5L V6 Engine (2GR-FE) failed due to the subsequent loss of lubrication caused by the rupture of the Oil Cooler Pipe (Rubber component), a manufacturing defect known under TSB T-SB-0201-11 (ZE2 Program). The failed engine is currently available for inspection by request at the independent…
1. The 3.5L V6 Engine (2GR-FE) failed due to the subsequent loss of lubrication caused by the rupture of the Oil Cooler Pipe (Rubber component), a manufacturing defect known under TSB T-SB-0201-11 (ZE2 Program). The failed engine is currently available for inspection by request at the independent service center before it is disposed of. 2. The defect causes a sudden and severe loss of engine oil. This creates a high probability of the engine seizing (losing all power) while driving at highway speeds, resulting in a complete loss of propulsion and placing occupants at severe risk of collision. 3. The failure was confirmed, not reproduced. The vehicle was initially diagnosed with misfire codes (P0300, P0301). New spark plugs and ignition coils were installed in an attempt to resolve the issue. As the misfire persisted, the mechanic performed a compression test, confirming catastrophic zero compression failure in cylinders 1 and 2. Professional diagnostics then revealed critical codes: P1603 (ECM Malfunction), P1604 (Startability Malfunction), and P1605 (Rough Idling). These codes confirm a severe internal engine issue, consistent with permanent damage sustained during the oil loss event caused by the ZE2 pipe defect in July 2024. 4. No, not physically inspected by the manufacturer. The manufacturer (Toyota Executive Office Case Manager) was provided with certified documentation of the failure, including the photo of the faulty pipe, maintenance records during our ownership, and the dealership purchase statement for the replacement part. Toyota refused to authorize a physical diagnostic inspection of the failed engine at a dealership before denying goodwill assistance. 5.Yes. The initial lubrication loss event on July 4, 2024, was preceded by a message displayed on the dashboard (followed by a second failure event in October 2025 indicated by a flashing Check Engine light and the Traction Control light).
- Air bags
Steering wheel air bag did not deploy in front end MVA
- Engine
Our car had a major oil leak from the engine Oil Cooler Pipe Manifold at the bottom of the engine (front). My research has concluded that this has been a known issue with various Toyota models with the 2GR-FE engine, however Toyota has not issued a recall and the local dealership has never…
Our car had a major oil leak from the engine Oil Cooler Pipe Manifold at the bottom of the engine (front). My research has concluded that this has been a known issue with various Toyota models with the 2GR-FE engine, however Toyota has not issued a recall and the local dealership has never mentioned it during services. The NHTSA has known about this issue, however it appears that little to no action has been taken with the vehicle manufacturer or public. The issue concerns a leak that is waiting to happen on all engines with the original Oil Cooler Pipe as it is designed with rubber pipes that degrade over time and even a pin hole oil leak will cause virtually all the engine oil to drain from the engine onto the pavement below and underside of the vehicle including brake components. It is not a matter of “if” but “when” it will happen, and the consequences can leave people stranded with a damaged engine and undriveable vehicle. Severe injury and deaths can and will result due to the ongoing lack of action by the NHTSA and vehicle manufacturer. As an aside, the cost to repair is in the thousands of dollars, unless the owner is fortunate like myself who was able to replace the Oil Cooler Pipe at my own time and cost with the vehicle out of service and significant clean up required. I still don’t know the long-term effects of our engine being almost drained of oil and because of this may now sell the car which was not in our plan. I have added a photo of the original inadequately designed Oil Cooler Pipe and the replacement version purchased from Toyota. Also, the dealership were not interested in doing anything for us. I demand that the NHTSA takes action which is long overdue. Please take this issue seriously
- Engine · Power train
Dear Sir/Madam, I am writing to file a formal complaint regarding persistent safety issues with my 2011 Toyota Highlander V6 AWD. Specifically, I have experienced significant problems related to the engine timing guide, timing chain, transmission system, which pose a risk to both vehicle occupants…
Dear Sir/Madam, I am writing to file a formal complaint regarding persistent safety issues with my 2011 Toyota Highlander V6 AWD. Specifically, I have experienced significant problems related to the engine timing guide, timing chain, transmission system, which pose a risk to both vehicle occupants and other road users. Vehicle Information: Toyota Highlander V6 AWD, VIN: [XXX] Description of the Issue: The transmission in my Highlander has exhibited the following problems: 1) Low engine oil pressure, ticking Noise: There is low engine pressure, faulty guides timing chains, recurring ticking noise. This noise represents issues from the powertrain area and has raised concerns about potential mechanical flaws1. 2) Defective components, slipping Transmission: The transmission surges/slips affecting overall control and safety. This issue has been reported by other Highlander owners as well. Cross-Referencing Other Complaints and Recalls: 3) They did not go far back, Per the NHTSA database, there have been two documented complaints related to transmission issues in the 2011 Toyota Highlander V6 AWD, these complaints align with my experience, however they have not sent me the recall notice. In fact, Toyota has faced recalls and technical service bulletins (TSBs) related to transmission problems in various Highlander models: The 8-speed UA80E/UA80F automatic transmission used in the 2020 Highlander received a TSB for shift flare during wide-open throttle acceleration from 40 – 60 mph and during the upshift from 2nd to 3rd gear. Toyota addressed this issue under warranty1. The 6-speed U660F/U760E automatic transmission, used in earlier Highlander models, was generally reliable. However, the introduction of the 8-speed UA80E/UA80F unit caused initial problems1. Request for Action: Per NHTSA findings please ensure all the models sharing the chassis, model family, part and Toyota transmission oil are included in recall or service campaign. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C.
- Engine
the intake VVT-i gear on 2AR-FE equipped Rav-4s and other Toyota models Has failed after 113k miles. The vehicle is at risk of causing self inflicted damage due to this common issue many toyota owners are facing 2008-2013 highlanders. The part has not been inspected but was diagnosed by a…
the intake VVT-i gear on 2AR-FE equipped Rav-4s and other Toyota models Has failed after 113k miles. The vehicle is at risk of causing self inflicted damage due to this common issue many toyota owners are facing 2008-2013 highlanders. The part has not been inspected but was diagnosed by a mechanic based on their past experience with these vehicles and sound. No warnings or dash lights just a terrible metallic rattle upon cold start. This started around 2k miles ago.
- Engine
As my family was driving down Interstate 85 in Atlanta going around 80 MPH a dash notification came on that said "Low Oil Pressure pull over" the notification came on then went away then came back on (car never ran hot). Thankfully we were near an exit so we pulled off and into the first parking…
As my family was driving down Interstate 85 in Atlanta going around 80 MPH a dash notification came on that said "Low Oil Pressure pull over" the notification came on then went away then came back on (car never ran hot). Thankfully we were near an exit so we pulled off and into the first parking lot we could find. There was a huge puddle of oil under the car and smoke coming from the engine. We got our Highlander towed back to our nearest Toyota dealership to our home to be inspected. It was discovered our Engine Oil Cooler Pipe had failed resulting in all of the oil in our car being released from the car. If we hadn't been able to pull over so fast most likely my engine would have seized up and caused a wreck in the middle of the interstate. After doing research on this issue I discover there was a Warranty Enhancement Program done by Toyota on this very part valid through 2021 or 150,000 miles. I have 163,000 miles on my car. I tried to explain to Toyota that like majority of people my car was not driven for 2 years due to covid so they should at the very least expand the warranty. The dealership also told me they couldn't have replaces the part until it failed which from what I can tell of the hundreds of other Toyotas experiencing this same issue there are no warning signs prior to the part failing, you discover it failed by it releasing all your oil while driving at a high rate of speed.
- Engine and engine cooling › Engine › Oil/lubrication › Oil cooler
Pin hole in oil line causing excessive oil leak. Loose oil very quickly. Could cause permanent damage to engine. Had old line replaced by mechanic with a metal line only inspected by my mechanic and there was mention of past recall by my mechanic but it does not show this on your sight. There…
Pin hole in oil line causing excessive oil leak. Loose oil very quickly. Could cause permanent damage to engine. Had old line replaced by mechanic with a metal line only inspected by my mechanic and there was mention of past recall by my mechanic but it does not show this on your sight. There was no warning lights at all. A coworker noticed excessive oil on the ground when I left work and called me immediately to check oil. Very little left in engine and I could see it coming from under car. Incident happen on 1-9-2023 Had car towed to mechanic to avoid damage to engine. My issue was there a recall at some point ? If other Toyotas are having this issue need to be addressed before cars blow there engines from no oil ! Since no warning lights came on I would have no idea I was losing oil this fast just driving down the road! I only knew because my coworker saw massive spill on concrete at work .
- Steering
Clicking in steering column light comes on dash for power steering then hard to make turn then well go back off then able to make turns with ease again
- Steering
In the last 30 days, the steering has begun to feel "loose", as if I am driving on ice. At first it was barely perceptable. There has been more "play" in the steering. During the last 2 days, the car is now making a thud when I am steering right. I have an appointment for a mechanic to look at it.…
In the last 30 days, the steering has begun to feel "loose", as if I am driving on ice. At first it was barely perceptable. There has been more "play" in the steering. During the last 2 days, the car is now making a thud when I am steering right. I have an appointment for a mechanic to look at it. The car is a 2011 Highlander, AWD, with 89,000 miles on it. I feel the steering issue could be very dangerous at some point.
- Steering
The power steering is clunky, locks in position when backing out of a parking spot, is clunky and unreliable at slow speeds. I can feel the steering column get far tighter feeling when turning at slow speed (3-10 mph)
- Structure › Interior panels › Sun visor
The contact owns a 2011 Toyota Highlander. The contact stated that the sun visors on the driver’s and passenger’s sides were hanging down and would not stay in the upright position. The contact stated that the sun visors obstructed her vision while driving at various speeds. The contact called the…
The contact owns a 2011 Toyota Highlander. The contact stated that the sun visors on the driver’s and passenger’s sides were hanging down and would not stay in the upright position. The contact stated that the sun visors obstructed her vision while driving at various speeds. The contact called the dealer and was informed that there was a recall on the vehicle for the sun visors; however, the recall had expired. The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 108,000.
- Engine · Power train
A very common problem and a very expensive fix. There is a rattling noise at cold startup that is coming from the engine. This is a very common problem and many people have complained about this. I don’t know why Toyota is ignoring it. I believe the problem is with the camshaft timing gear but I could be wrong. There should definitely be a recall for this issue!
- Engine · Engine and engine cooling › Engine › Oil/lubrication · Power train
My 2011 Toyota Highlander is burning engine oil. So much that I almost got into a major accident on the highway. So what happens is the engine starts burning oil. When the oil level is low the Highlander gives a warning sign saying “low oil pressure” and then the SUV TURNS OFF automatically (even…
My 2011 Toyota Highlander is burning engine oil. So much that I almost got into a major accident on the highway. So what happens is the engine starts burning oil. When the oil level is low the Highlander gives a warning sign saying “low oil pressure” and then the SUV TURNS OFF automatically (even if you’re on the highway). Thousands of people have complained about this and Toyota is ignoring all the complaints. This issue should be a recall as this is a major problem with highlanders year 2008-2013
- Engine
While driving on the parkway, an oil pressure warning light came on and said to turn off the car. The car immediately started making noise so we pulled onto the shoulder and turned the car off. We were with our 3 children stuck on the side of the very busy road and had to wait for a tow truck.…
While driving on the parkway, an oil pressure warning light came on and said to turn off the car. The car immediately started making noise so we pulled onto the shoulder and turned the car off. We were with our 3 children stuck on the side of the very busy road and had to wait for a tow truck. After having it towed our mechanic said it is a known problem with our car. The rubber oil line hose ruptured and we lost all of our oil immediately. The engine could have seized at any moment while driving. Toyota knows of this issue and has since changed it to a metal system but never did a formal recall for this issue. We are currently waiting for it to be fixed so I don't have a bill yet. This seems like something dangerous that could be avoided with a recall. Toyota will not fix this issue.
- Forward collision avoidance › Automatic emergency braking · Service brakes
Abs brake actuator started to fail.
- Air bags · Seat belts
I was going about 40 mph on the Taconic Pkwy over the amvet bridge in the far left lane of the highway. Traffic was heavy and slowing down. It had st finished raining. I was hit on the rear right rear side by a F150 truck that caused me to slide into the guard rail on the left side of the road.…
I was going about 40 mph on the Taconic Pkwy over the amvet bridge in the far left lane of the highway. Traffic was heavy and slowing down. It had st finished raining. I was hit on the rear right rear side by a F150 truck that caused me to slide into the guard rail on the left side of the road. The car spun out of control and slid three lanes and hit the guard rail on the right side of the road. Both front sides over the tail lights and the entire front were badly damaged. The side airbags activated but the front airbags failed to activate. Because of this failure I was badly injured. My head hit the steering wheel. I was not protected by the seat belt. My passenger and I had to be cut out of the vehicle. My neck sustained a dislocated disk and I still have pain going from my left shoulder, down my arm, into my hand. I suffered a permanent loss of vision in my right eye, a concussion and lacerations to my left hand and rear scalp. My iris in the right eye was severely damaged and still needs to be surgically repaired. I have suffered both physical and mental damages because of the failure of the seat belts to restrain me and the failure of the airbags to inflate.
- Engine
A major and catastrophic oil leak occurred while the car was being driven by my wife on a major thruway during early morning rush hour traffic. The low oil pressure light came on and she was able to maneuver to a parking lot and shut the vehicle off. If the engine had seized due to oil starvation, she may have been involved in a serious accident or seeping oil may have potentially ignited causing a vehicle fire.
- Service brakes
When driving approximately 20-30mph multiple warning lights illuminated on dash along with Brake Malfunction warning on information display. Did not notice any issues with braking and no fluid loss / leaks noted. Codes stored were C1241 (Low or High Power Supply Voltage), C1253 (Pump Motor…
When driving approximately 20-30mph multiple warning lights illuminated on dash along with Brake Malfunction warning on information display. Did not notice any issues with braking and no fluid loss / leaks noted. Codes stored were C1241 (Low or High Power Supply Voltage), C1253 (Pump Motor Relay), and C1391 (Abnormal Leak of ACC Press). Noticed that ABS pump would run 2-5 seconds every 1-5 minutes. Original part number 44510-48080. Research shows multiple Toyota “Warranty Extensions” on multiple models using same/similar components.
- Steering · Visibility
The contact owns a 2011 Toyota Highlander. The contact stated that the intermediate steering shaft was making an abnormal knocking noise while turning to the left or the right. Additionally, the driver’s side window failed to roll up or down because it was off track. There were no warning lights…
The contact owns a 2011 Toyota Highlander. The contact stated that the intermediate steering shaft was making an abnormal knocking noise while turning to the left or the right. Additionally, the driver’s side window failed to roll up or down because it was off track. There were no warning lights illuminated. The vehicle was taken to the local dealer but was not diagnosed or repaired. The manufacturer was not contacted. The approximate failure mileage was 80,000.
- Engine
The contact owns a 2011 TOYOTA Highlander. The contact stated while adding engine oil, the oil would leak from front section of engine. The contact stated that the oil pressure warning light was illuminated. The vehicle was towed to a local dealer where it was in the process of being diagnosed. The manufacturer was not informed of the failure. The failure mileage was approximately 161,000.
- Steering
When you turn the steering wheel and then the turn IS completed...the steering wheel does not go back into position. This occurs when you are in motion.
- Air bags
I hit a concrete post at roughly 30 mph, dead center front of vehicle. the car was totalled, and none of the airbags deployed. I broke my neck due to the seatbelt holding my chest and torso back on the seat, while my head moved forward, all the way down and hitting the steering wheel. this head…
I hit a concrete post at roughly 30 mph, dead center front of vehicle. the car was totalled, and none of the airbags deployed. I broke my neck due to the seatbelt holding my chest and torso back on the seat, while my head moved forward, all the way down and hitting the steering wheel. this head movement resulted in a complete break of my C2 vertebrae. this happened after entering the large area of a walmart parking lot from the highway.
- Engine
Engine oil cooler hose bursted and leaked oil everywhere on the highway, engine overheated..was alerted by the system as low pressure engine oil warning. Room to cause significant damage. Need to recall this.
- Electrical system · Engine
Turning on the rear defroster will cut power to the engine and dashboard. Turning off the defroster will return power to the dash. This happens regardless of if the vehicle IS still or in motion.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Steering Column Separation
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given…
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Upper Steering Column Separation
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle…
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211829DD: Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint Toyota has added approximately 430,700 2008 ? 2018 model year Highlander and Highlander Hybrid vehicles to this Customer Support Program
Every Toyota Highlander model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.