2012 Toyota Prius
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Prius › 2012
These records cover every 2012 Toyota Prius. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2012 Toyota Prius. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2014 Toyota Prius and 2012-2014 Toyota Prius V vehicles. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.
Risk and remedy
Risk
If the hybrid system shuts down unexpectedly, it can increase the risk of a crash.
Remedy
Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unit (ECU) and the hybrid control ECU as necessary, free of charge. The recall began January 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0V. Note: The software updates in this recall are needed even if the vehicle had the software previously updated under recalls 14V-053 or 15V-449.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2010-2012 Toyota Prius, 2010 and 2012 Toyota Prius Plug-in Hybrid, and 2011-2012 Lexus CT200h vehicles. A weld in the curtain shield air bag inflator may crack causing one or both portions of the inflator to eject into the passenger cabin.
Risk and remedy
Risk
If either portion of the curtain shield air bag inflator ejects into the passenger cabin, there is an increased risk of injury to vehicle occupants.
Remedy
Toyota will notify owners, and dealers will install retention brackets to the curtain shield air bags, free of charge. The recall began on October 17, 2016. Owners may contact Toyota Customer Service Department at 1-800-331-4331. Toyota's number for this recall is Toyota G0U, and Lexus GLJ.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota is recalling certain model year 2010 through 2014 Prius vehicles. In the affected vehicles, the Intelligent Power Module (IPM) inside the inverter module (a component of the hybrid system) contains transistors that may become damaged from high operating temperatures. If this occurs, various warning lamps will be illuminated on the instrument panel…
Risk and remedy
Risk
The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. The hybrid system could also shut down completely resulting in a vehicle stall, increasing the risk of a crash.
Remedy
Toyota will notify owners and dealers will update the software for both the motor/generator control electronic control unit (ECU) and the hybrid control ECU, free of charge. If an owner experiences a failure of the inverter before the vehicle receives updated software, the dealer will repair or replace the inverter assembly with a new one at no charge. The recall began on March 21, 2014. Owners may contact Toyota at 1-800-331-4331.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Owner complaints
424 complaints46 involved a crash2 involved a fire33 injuries
What owners report most
Latest complaints
- Service brakes
When I started my car this morning, the red BRAKE light, ABS warning light and anti-slip light were all illuminated. The car does still stop but the brakes are very spongy and there's a clicking noise under the hood. I only moved the car out of the driveway to allow other cars to leave. The brake…
When I started my car this morning, the red BRAKE light, ABS warning light and anti-slip light were all illuminated. The car does still stop but the brakes are very spongy and there's a clicking noise under the hood. I only moved the car out of the driveway to allow other cars to leave. The brake fluid is not low. This is the problem listed under Toyota's Customer Support Program Notice ZJB but it is past the coverage expiration date. There should not be an expiration date on a known manufacturer issue. If this had happened while I was on the highway driving to work, I could have had a serious accident.
- Service brakes
1. My Brake booster failed/malfunctioned. I had to get it repaired/replaced by Toyota so it might be with the dealership or thrown out by now. 2. I had to take it in because I had an incident where I was unable to apply the break on the car. I was lucky enough to be in a not busy street and was…
1. My Brake booster failed/malfunctioned. I had to get it repaired/replaced by Toyota so it might be with the dealership or thrown out by now. 2. I had to take it in because I had an incident where I was unable to apply the break on the car. I was lucky enough to be in a not busy street and was able to pull over safely. 3. Toyota diagnosed the issue and proceeded with the repair. They even have an extended warrantee but due to covid I was unable to get the repair in time for it to be covered by one year and had to pay. 4.Toyota did inspect and diagnose the problem. I have already paid for the repair with the dealership. 5.I had some breaking issues but I had brought it to an independent mechanic and they said it was my rotators since they needed to be replaced soon. I replaced them but then still had the issue and that's when my breaks stopped working for a brief time and I took it into Toyota to get it fixed. It been a while at this point but I do remember there being warning lights that turned on because of this issue as well.
- Air bags
The contact owned a 2012 Toyota Prius. The contact stated that while making a left turn at 10 MPH, another vehicle crashed into the vehicle and t-boned the front passenger's side door of the vehicle. The air bags did not deploy. There was no warning light illuminated. After the impact, the front…
The contact owned a 2012 Toyota Prius. The contact stated that while making a left turn at 10 MPH, another vehicle crashed into the vehicle and t-boned the front passenger's side door of the vehicle. The air bags did not deploy. There was no warning light illuminated. After the impact, the front windshield slowly cracked. A Police report was filed. The contact and her husband were transported by ambulance to the hospital. The contact suffered a fractured sternum, five fractured ribs, a crushed left wrist, and two fractured bones in the left ankle. The contact's husband had a fractured neck and five fractured ribs. The vehicle was towed to a tow yard and was declared a total loss by the insurance company. The manufacturer was not made aware of the failure. The failure mileage was approximately 140,000.
- Service brakes
Brake lights icons stay on mechanic at Toyota dealership state need new brak master cylinder and booster
- Service brakes
Brake warning lights on, buzzing sound every 10 seconds. Likely a known actuator and master cylinder issue
- Engine · Vehicle speed control · Wheels
Unknown. There were a multitude of codes that appeared on the diagnostics causing problems with engine. The temperature, brake, tire sensor lights are all on. The cruise control is not working. White smoke emitting from tail pipe and engine. Main engine coolant leaking. Car overheating rapidly.
- Service brakes
My 2012 Toyota Prius is experiencing brake actuator pump failure, presenting diagnostic trouble codes C1253 (brake actuator pump motor stuck/locked) and C1256 (brake actuator pump motor overcurrent). These codes trigger ABS, brake, and VSC warning lights and disable ABS and stability control.…
My 2012 Toyota Prius is experiencing brake actuator pump failure, presenting diagnostic trouble codes C1253 (brake actuator pump motor stuck/locked) and C1256 (brake actuator pump motor overcurrent). These codes trigger ABS, brake, and VSC warning lights and disable ABS and stability control. Toyota previously acknowledged this exact defect under Customer Support Program ZJB, which covered 2010-2015 Prius vehicles for brake booster and brake booster pump assembly failures triggered by these specific codes. I am the original owner of this vehicle, purchased new in 2012. I never received notification of CSP ZJB despite being the registered owner at the time notifications were distributed in 2019-2021. My current mileage is under 150,000 miles, within the secondary coverage mileage limit established by the program. Toyota has declined to provide goodwill coverage citing program expiration. This is a known safety defect that reduces braking effectiveness and disables ABS — it should have been addressed through a mandatory recall rather than a voluntary program with an expiration date that left original owners without recourse due to failed notification.
- Service brakes
The power brake unit and actuator are failing.
- Service brakes
Almost had an accident due to the brake master, actuator and booster pump assemblies, failing. There were no warning lights alerting me to an issue. Just lost ability to break and car shut off completely while in motion.
- Service brakes
The brake booster and brake booster pump assembly (also referred to as the Accumulater or Accentuater) have failed in my vehicle the same as Toyota's known defect that was mentioned in their Customer Support Program 20TE07 (part numbers can be found within the filing of their CSP 20TE07). I am…
The brake booster and brake booster pump assembly (also referred to as the Accumulater or Accentuater) have failed in my vehicle the same as Toyota's known defect that was mentioned in their Customer Support Program 20TE07 (part numbers can be found within the filing of their CSP 20TE07). I am reporting that this issue appears to have affected more than their initial estimate of ~118,960 states impacted vehicles.l because Toyota is declaring my vehicle is outside of their CSP 20TE07 although their defect endangers my safety (and the safety of others) and attempts to put their defective vehicle brake parts as my financial burden. This issue should have been/should be a larger recall. Thank you.
- Service brakes
2012 Prius with 174,344 miles in great condition, with regularly scheduled oil changes. ABS/Break Actuator failure on freeway with no warning other than a beep a few seconds before the breaks disappeared completely. Break pads changed 4 months ago and new wheels installed as well. This is a…
2012 Prius with 174,344 miles in great condition, with regularly scheduled oil changes. ABS/Break Actuator failure on freeway with no warning other than a beep a few seconds before the breaks disappeared completely. Break pads changed 4 months ago and new wheels installed as well. This is a known problem with Toyota under the TSB002419 where Break booster actuator was put on a customer service program to be fixed by the dealerships, but has since expired since 2022. The cars are still known to have their breaks go out due to this malfunction but it is now not covered by Toyota and cost $4K-$5K to fix which is more than the market value of the car today. This needs to be fixed and regulated.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2012 Toyota Prius. The contact stated that while attempting to register the vehicle, it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 187,000, and at the time of registration, it was discovered that the mileage was 227,000.
- Service brakes, hydraulic
The contact owns a 2012 Toyota Prius. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated, with an abnormal sound coming from the vehicle. The vehicle was taken to the dealer where it was diagnosed with brake booster failure. The contact was informed…
The contact owns a 2012 Toyota Prius. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated, with an abnormal sound coming from the vehicle. The vehicle was taken to the dealer where it was diagnosed with brake booster failure. The contact was informed that the brake booster pump needed to be replaced. The vehicle was not repaired. The contact stated that the failure was a known failure with the vehicle. The manufacturer was made aware of the failure. The contact was informed that an undisclosed Extended Warranty Program had expired. In addition, the contact was informed that the repair was not covered. The failure mileage was approximately 175,000.
- Service brakes
My Brake Booster/Actuator failed on me while on the freeway with out any warnings. It made it really hard to stop the car. I didn't find out what it was untill I took it into a repair shop and they told me it was the Brake Booster/Actuator.
- Service brakes
The vehicle is experiencing a suspected brake actuator / brake booster failure. Multiple warning lights appeared simultaneously, including ABS, Brake, Traction Control, and Master Warning lights. The vehicle produces a frequent buzzing noise from the brake system, especially at low speeds or when…
The vehicle is experiencing a suspected brake actuator / brake booster failure. Multiple warning lights appeared simultaneously, including ABS, Brake, Traction Control, and Master Warning lights. The vehicle produces a frequent buzzing noise from the brake system, especially at low speeds or when stopped. The noise occurs repeatedly when pressing the brake pedal, indicating the system is struggling to maintain hydraulic pressure. This condition raises serious safety concerns because it may reduce braking performance and increase stopping distance. Brake system failures present a significant risk to vehicle occupants and others on the road. After researching the issue, I learned this appears to be a common failure in Toyota Prius vehicles of similar model years, and Toyota previously issued extended warranty coverage for the brake booster/actuator assemblies. However, many vehicles now exceed the coverage limits despite the safety nature of the defect. I am submitting this complaint because a failing brake system is a critical safety hazard, and this issue appears widespread.
- Service brakes
Vehicle check engine code C1391 (Antilock Brake System - abnormal leak in accumulator) came up on 2/5/2026. Recommended repair is to replace the Brake Booster Pump and Assembly, Brake Booster - over $1000 in parts alone. This WAS covered by an Extended Warranty by Toyota (10 years / 150K miles). I…
Vehicle check engine code C1391 (Antilock Brake System - abnormal leak in accumulator) came up on 2/5/2026. Recommended repair is to replace the Brake Booster Pump and Assembly, Brake Booster - over $1000 in parts alone. This WAS covered by an Extended Warranty by Toyota (10 years / 150K miles). I only have 120K miles at this time but am past the 10 year mark. However, it seems that this part will fail in every Prius given time and encourage NHTSA to monitor these failures and hold Toyota accountable to address post the 10 year / 150K mile mark.
- Service brakes
Vehicle: 2012 Toyota Prius Mileage: Approximately 217,000 miles While driving normally in traffic, the vehicle experienced a sudden and unexpected brake system failure. Multiple warning lights illuminated simultaneously, including the red BRAKE warning light, ABS warning light, traction control…
Vehicle: 2012 Toyota Prius Mileage: Approximately 217,000 miles While driving normally in traffic, the vehicle experienced a sudden and unexpected brake system failure. Multiple warning lights illuminated simultaneously, including the red BRAKE warning light, ABS warning light, traction control light, and warning symbol (!). Shortly after, the vehicle began emitting an audible warning/beeping, and there was a sudden loss of power brake assist. The brake pedal behavior changed abruptly: the pedal became very soft initially, then became suddenly hard halfway through travel, This failure occurred while approaching another vehicle in traffic, and I narrowly avoided rear-ending the vehicle in front of me. The unexpected loss of brake assist created an immediate and dangerous situation, as the vehicle did not decelerate as expected when the brake pedal was applied. Due to the seriousness of the brake failure and safety risk, the vehicle was removed from service and towed. This incident represents a critical safety defect, as sudden loss of braking assist while driving poses a significant risk to vehicle occupants and other road users. I am reporting this incident to document the hazard and request investigation into the reliability and safety of the brake system design. I am requesting you to please issue a recall and reimburse me , as these parts are very expensive , it affected my financial situation, Thanks
- Service brakes
My 2012 Toyota Prius plug in hybrid had just passed state inspections and was even looked at by a dealership a year ago with no reported issues. I brought up a whirring issue at the dealership when breaking but the dealership said that’s normal for a hybrid. In a matter of minutes while driving…
My 2012 Toyota Prius plug in hybrid had just passed state inspections and was even looked at by a dealership a year ago with no reported issues. I brought up a whirring issue at the dealership when breaking but the dealership said that’s normal for a hybrid. In a matter of minutes while driving, the traction light, brake light, and ABS light came on as well as a groaning, whirring sound when breaking. Over time, the breaks failed and I could not stop the car, almost causing a wreck because I could not stop without putting all my body weight on the break pedal. When taking it to the Toyota dealership for a whole diagnostic, they said it was a break actuator and break booster failure that is known to happen with Prius’s. They quoted me $3000 for a repair and then marked my breaks as yellow not red on their sheet implying I could still drive it despite the dangerous situation of driving without functioning breaks. When looking into it, this seems to be a known and common problem with Prius’s due to a faulty manufactured part. Codes were c1391, wc1256, and c1252. I believe this part should be recalled and Toyota should fix these faulty parts, especially considering they inspected my car and did not mention it as an issue despite it being a known issue. I got a second opinion from Mavis Tires and they concurred with the diagnosis but could not fix it.
- Electrical system · Fuel/propulsion system · Service brakes
While driving, the vehicle experienced a sudden brake system malfunction without prior warning or gradual degradation. The vehicle was being operated under normal driving, road, and weather conditions. No recent brake service, repairs, or aftermarket modifications had been performed prior to the…
While driving, the vehicle experienced a sudden brake system malfunction without prior warning or gradual degradation. The vehicle was being operated under normal driving, road, and weather conditions. No recent brake service, repairs, or aftermarket modifications had been performed prior to the failure. Multiple warning lights illuminated on the dashboard, including the ABS warning light, brake warning light, and traction control warning light. Shortly after the warning lights appeared, the vehicle began emitting continuous warning beeps. Audible buzzing or pumping noises were also present from the brake system during the malfunction. During this event, brake performance was reduced and braking felt inconsistent. The brake pedal became hard at times and spongy at other times, requiring increased effort to slow the vehicle and resulting in unpredictable braking response. This created a safety concern while the vehicle was in motion. The driver was forced to alter driving behavior and exercise extreme caution due to reduced braking confidence and unpredictable pedal feel. The malfunction has occurred intermittently during normal driving. The condition temporarily resolves on its own and later reoccurs without corrective action. The suspected failed component is the brake actuator / ABS actuator assembly. A diagnostic scan retrieved fault codes C1252 (Brake Booster Pump Motor ON Time Abnormally Long), C1253 (Pump Motor Relay Malfunction), and C1256 (Accumulator Low Pressure), which are consistent with brake actuator malfunction. The failure occurred at approximately 154,000 miles. This vehicle model and generation have a documented history of premature brake actuator failures with similar safety-related symptoms reported by other owners. The condition places the driver and others at risk due to unpredictable braking behavior, reduced braking effectiveness, and repeated warning alarms while driving. Warning lamps and audible alerts continue intermittently.
- Suspension
The contact owns a 2012 Toyota Prius. The contact stated that while reversing, the driver's side rear wheel flipped over. The vehicle was towed to the dealer, where it was diagnosed with a corroded I-Beam assembly on the rear wheel. The contact was informed that the driver's side rear hub and the…
The contact owns a 2012 Toyota Prius. The contact stated that while reversing, the driver's side rear wheel flipped over. The vehicle was towed to the dealer, where it was diagnosed with a corroded I-Beam assembly on the rear wheel. The contact was informed that the driver's side rear hub and the BRG assembly, rear suspension, and bolts needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 196,347.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact’s son recently purchased a 2012 Toyota Prius. The vehicle was a private sale. After the purchase, it was discovered that there was a mileage discrepancy based on the Carfax report. At the time of purchase, the vehicle displayed 137,000 miles. However, the Carfax report listed the mileage as 281,586 miles, and the current mileage on the vehicle was 151,103.
- Service brakes
While driving on a city road below the speed limit, braking was compromised leading to loss of traction and failure of the ABS system. During the incident, the brake, ABS, and engine warning lights all turned on and a collision was only avoided due to pumping of the brakes. Further investigation by…
While driving on a city road below the speed limit, braking was compromised leading to loss of traction and failure of the ABS system. During the incident, the brake, ABS, and engine warning lights all turned on and a collision was only avoided due to pumping of the brakes. Further investigation by a mechanic revealed a failure of the brake actuator system. Failure of this system has increased the stopping distance of the vehicle considerably and makes braking unreliable and unpredictable.
- Electrical system
The hybrid system fails to enter “Ready” mode with no SMR engagement audible from the junction box. Dashboard displays ABS, brake, engine, and master warning lights. OBD codes include U0142, U0155, and previously U0073 . Rear brake lights function normally when pedal is pressed. Dealer said to pay…
The hybrid system fails to enter “Ready” mode with no SMR engagement audible from the junction box. Dashboard displays ABS, brake, engine, and master warning lights. OBD codes include U0142, U0155, and previously U0073 . Rear brake lights function normally when pedal is pressed. Dealer said to pay 250$ for diagnostic and diagnosed incorrect voltage from brake light switch and quoted $348.94 to replace, but refused to proceed with open safety recall J0V / 18V684 (NHTSA 18V684000) citing inability to achieve “Ready” mode. Recall covers inverter failure leading to loss of motive power. Dealer declined to jump 12V battery or use external power to perform required software update and inverter inspection. Vehicle remains inoperable and poses safety risk due to sudden power loss potential. Component (inverter G9200-47141) available for inspection. Problem confirmed by dealer diagnostics. No police or insurance inspection. Warning lamps appeared after 12V battery replacement three months ago.
- Service brakes
While driving 60 mph in highway, ABS, traction control and brake lights lit up and vehicle lost its effective braking power. There were no prior warnings prior to this failure. It was a sudden incident. Since it wasn't rush hour, I could safely reduce speed and bring the car to stop. Situation…
While driving 60 mph in highway, ABS, traction control and brake lights lit up and vehicle lost its effective braking power. There were no prior warnings prior to this failure. It was a sudden incident. Since it wasn't rush hour, I could safely reduce speed and bring the car to stop. Situation could have been much different if it was normal hours. After taking the car to dealership, it indicated DTC code 1391, Brake Assembly Failure. The car was fixed at dealership at cost of $3,000. When researched further, it appeared that there is broader pattern of failures. Numerous reports have been made by owners of 2010–2015 Toyota Prius, Prius PHV, 2012–2015 Prius V, 2012–2014 Camry Hybrid, and 2013–2015 Avalon Hybrid vehicles, all of which share the same brake booster pump assembly design manufactured by Advics Co., Ltd. Dealerships, including Capistrano Toyota and Claremont Toyota in California, have previously petitioned NHTSA regarding this very defect. Their 2019 letter to the agency documented that Toyota: * Knowingly excluded hundreds of thousands of hybrids from prior safety recalls (DOH 13V-235 and KOL 19V-544) despite identical failures. *Issued “post-failure” repair programs (Warranty Enhancements ZJB, ZKK, ZKC, ZLM, 20LE03, 23TE06 and 23TE07) only after owners experienced brake failure. * Identified the same DTC codes (C1252, C1253, C1256, C1391, U0293) in both recalled and unrecalled vehicles—codes that correspond to accumulator leaks, loss of brake pressure, and failure of brake assist and stability control systems. * Admitted through Technical Service Bulletin TSB-0130-19 that these defects caused loss of hydraulic pressure, increased stopping distance, and total loss of brake assist in affected hybrids. In short, the defect pattern across multiple hybrid models is identical to those already recognized by Toyota and NHTSA under prior recall campaigns, but for reasons unexplained, Toyota limited the recall population and left many consumers unprotected
- Service brakes
Traction control.Abs and brake warning lights all came on.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Brake Actuator Valve Wear
The Office of Defects Investigation (ODI) has received a petition dated September 19, 2023 from the owner of a 2012 Toyota Prius V requesting that ODI reevaluate its decision to deny DP19-004. In the letter, the petitioner reported experiencing an unexpected and complete loss of brake power while driving, accompanied…
The Office of Defects Investigation (ODI) has received a petition dated September 19, 2023 from the owner of a 2012 Toyota Prius V requesting that ODI reevaluate its decision to deny DP19-004. In the letter, the petitioner reported experiencing an unexpected and complete loss of brake power while driving, accompanied by multiple dashboard warning lights. This petition is based on the petitioner's direct experience and assessment that ODI closed DP19-004 because its prompting petition was withdrawn by that petitioner. ODI will review the work conducted during DP19-004 and a review of any additional related complaints and crashes via a new defect petition The petition and related materials can be reviewed at NHTSA.gov under the following ODI number:11553736.
- Pedestrian alert sounds
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
- Brake Actuator Valve Wear
On September 19, 2019, the Office of Defects Investigation (ODI) received a defect petition from Mr. Roger Hogan requesting that the Agency investigate and recall certain Toyota Prius, Prius PHV, Camry Hybrid and Avalon Hybrid vehicles for a brake actuator valve wear condition covered under Toyota Customer Support…
On September 19, 2019, the Office of Defects Investigation (ODI) received a defect petition from Mr. Roger Hogan requesting that the Agency investigate and recall certain Toyota Prius, Prius PHV, Camry Hybrid and Avalon Hybrid vehicles for a brake actuator valve wear condition covered under Toyota Customer Support Programs ZJB and ZKK (subject CSP?s). In support of his request, the petitioner identified 117 NHTSA complaints allegedly related to the subject CSP condition, including 60 reporting crashes. On September 30, 2019, ODI opened Defect Petition DP19-004 to evaluate the petitioner?s request for an investigation. In August 2020, the petitioner notified the Agency that he was withdrawing his petition. Because the petitioner has withdrawn the petition, we are denying the petition as moot and no further analysis of this petition is necessary.NHTSA is authorized to issue an order requiring notification and remedy of a defect if the Agency?s investigation shows a defect in the design, construction, or performance of a motor vehicle that presents an unreasonable risk to safety. 49 U.S.C. ?? 30102(a)(9), 30118. Because the petitioner has with withdrawn the petition, the petition is denied as moot. This action does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency notes that it is not required to receive a defect petition prior to opening a defect investigation and will take further action if warranted by future circumstances.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10240056DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
- 10240055DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10235232DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
- 10235231DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
- 10235230TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
- 10235229TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
Every Toyota Prius model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.