2018 Toyota Prius

Recalls

1 recall names the 2018 Toyota Prius. Newest first.

• Electrical system › Wiring

  Sep 5, 2018NHTSA 18V579000192,347 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016-2018 Toyota Prius vehicles. A portion of the engine wire harness connected to the hybrid Power Control Unit (PCU), could contact the cover at this connection and wear, causing an electrical short circuit.

  Risk and remedy

  Risk

  An electrical short can increase the risk of a fire.

  Remedy

  Toyota will notify owners, and dealers will inspect the engine wire harness assembly and replace it if damage is found. A protective sleeve or protective tape will be included to prevent any future damage. These repairs will be performed free of charge. The recall began October 30, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0T.

  Full recall details →

Owner complaints

What owners report most

1. Unknown or other6
2. Visibility/wiper5
3. Exterior lighting5
4. Vehicle speed control4
5. Air bags3
6. Engine and engine cooling3
7. Service brakes3
8. Structure3
9. Engine3
10. Seats2

Latest complaints

• Oct 2, 2026MD
  Engine · Unknown or other
  I am writing to inform you about a very dangerous situation that occurred to me in June 2026 and that could pose a significant safety risk to other drivers who own 2016-17-18-19 Toyota Prius cars.  The risk stems from a defective part (the catalytic converter) that Toyota Corporation knew about in…

  I am writing to inform you about a very dangerous situation that occurred to me in June 2026 and that could pose a significant safety risk to other drivers who own 2016-17-18-19 Toyota Prius cars.  The risk stems from a defective part (the catalytic converter) that Toyota Corporation knew about in 2019 but failed to notify owners of those models.    Instead of issuing a recall and replacing the defective part, Toyota chose instead to issue a nationwide alert to their mechanics (Technical Service Bulletin (TSB)—0135-19, issued on 9/27/19).  Through the TSB, Toyota extended the warranty to 8 years or 80,000 miles for the part.  However, Toyota never notified the car owners of this potentially dangerous situation.  In my case, the defective catalytic converter failed, causing overheating and destroying my engine, costing me $ 7,454.55 to replace it and other out-of-pocket expenses totaling approximately $ 8,000.   I am seeking your help in getting Toyota Corporation to take responsibility for this matter and with the repair damage to my car.  Toyota’s defective part caused this damage, and it failed to notify me of the potential dangers.   In addition, other Toyota Prius owners should be alerted to the serious safety risk to them if the defective catalytic converter fails and causes serious damage to their car. It can also cause an accident while driving.  In my case, I was driving in the middle lane on 95N at 60 miles per hour when the car stalled, which could have caused a catastrophic accident.  Fortunately, I was able to coast to the shoulder and then call for help.

• Aug 17, 2026MA89,100 mi
  Engine and engine cooling
  The contact owns a 2018 Toyota Prius. The contact stated that while having a routine oil change, the contact was made aware that there was no coolant in the coolant reservoir. No warning lights were illuminated. The contact was constantly adding coolant to the coolant reservoir; however, the…

  The contact owns a 2018 Toyota Prius. The contact stated that while having a routine oil change, the contact was made aware that there was no coolant in the coolant reservoir. No warning lights were illuminated. The contact was constantly adding coolant to the coolant reservoir; however, the following day the coolant reservoir was empty. The failure had occurred on several different occasions. The vehicle was taken back to the residence. The vehicle was not diagnosed or repaired. The contact researched and was made aware of TSB Number: 013519; however, the VIN was not included. The manufacturer was notified of the failure. The failure mileage was approximately 89,100.

• Jun 26, 2026CA188,000 mi
  Engine and engine cooling
  The contact owns a 2018 Toyota Prius. The contact stated that while driving at an undisclosed speed, the engine constantly overheated. An unidentified warning light was flashing on the instrument panel. An independent mechanic inspected the vehicle and became aware that the coolant reservoir was…

  The contact owns a 2018 Toyota Prius. The contact stated that while driving at an undisclosed speed, the engine constantly overheated. An unidentified warning light was flashing on the instrument panel. An independent mechanic inspected the vehicle and became aware that the coolant reservoir was empty. One month later, the same failure reoccurred. A second independent mechanic inspected the vehicle, and the coolant reservoir was empty. The vehicle was taken to a dealer. The dealer diagnosed the vehicle with a coolant leak into the head gasket. The dealer advisor referenced a customer satisfaction program as the cause of the failure; however, the vehicle was over the mileage limit for the program. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 188,000.

• Mar 13, 2026LA
  Exterior lighting

  Both taillamps holding moisture. Could cause electrical issues or fire. .. same year and model car have same reported issues and were fixed by manufacturer. This vehicle is the same but different level.

• Aug 26, 2025TX
  Electrical system

  Driver door lock actuator not working. This seems to be a common problem for Toyota over the last decade, but they yet to put more vehicles to their recall list. Actuator just stopped working. I have to use key out of FOB to manually open. This is a safety issue if I’m trying to get in my car quickly for safety reasons and it does not open.

• Jul 2, 2025SC160,000 mi
  Latches/locks/linkages
  The contact owns a 2018 Toyota Prius. The contact stated the trunk opened at a slow speed and failed to remain open. The dealer was contacted and informed of the failure. The dealer informed the contact that the vehicle needed to be taken in to be inspected. The vehicle was not diagnosed or…

  The contact owns a 2018 Toyota Prius. The contact stated the trunk opened at a slow speed and failed to remain open. The dealer was contacted and informed of the failure. The dealer informed the contact that the vehicle needed to be taken in to be inspected. The vehicle was not diagnosed or repaired. The manufacturer was informed of the failure and confirmed that the VIN was not covered under recall. The manufacturer directed the contact back to the dealer for assistance. The failure mileage was approximately 160,000.

• Apr 23, 2025FL
  Visibility › Rearview mirrors/devices › Exterior

  Was driving around 35 mph and my right side mirror blew up. The back blew off and the mirror was shattered and hanging. Nothing hit it. Contacted Toyota and the parts have been on a stop, but there is no recall. It has been 4 months.

• Mar 26, 2025PA89,682 mi
  Engine · Engine and engine cooling › Exhaust system
  The contact owns a 2018 Toyota Prius. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to the dealer where it was diagnosed with a failed heat exchanger, catalytic converter, and exhaust system. The contact was informed that…

  The contact owns a 2018 Toyota Prius. The contact stated while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to the dealer where it was diagnosed with a failed heat exchanger, catalytic converter, and exhaust system. The contact was informed that the heat exchanger, the catalytic converter, and the exhaust system needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 89,682.

• Dec 5, 2024FL39,000 miCrash
  Forward collision avoidance › Automatic emergency braking · Service brakes, air › Antilock › Abs warning light · Vehicle speed control
  The contact owns a 2018 Toyota Prius. The contact stated that while in bumper-to-bumper traffic, the vehicle suddenly accelerated. The brake pedal was applied but failed to respond. The driver crashed into the front passenger side of the Lexus. The vehicle continuously moved forward. The contact…

  The contact owns a 2018 Toyota Prius. The contact stated that while in bumper-to-bumper traffic, the vehicle suddenly accelerated. The brake pedal was applied but failed to respond. The driver crashed into the front passenger side of the Lexus. The vehicle continuously moved forward. The contact was eventually able to pull over safely. The pre-collision malfunction warning light illuminated. The brake malfunction light was flashing. The air bags did not deploy. There was no reported fire or injury. A police report was filed. The vehicle was taken to the local dealer, who could not determine the failure. The vehicle was not diagnosed or repaired. The vehicle was then towed to an autobody center where it remained. The manufacturer was contacted, but no additional assistance was provided. The approximate failure mileage was 39,000.

• Mar 2, 2024WV
  Air bags
  The Airbag lights were lit, the person sitting with seatbelt on (flashing) and the person sitting with an inflated airbag in front of them. I ran an OBD2 scan on SRS and got code B1656. Driver seat belt buckle Left Hand. I Investigated the latch and found one wire was snapped off and a couple of…

  The Airbag lights were lit, the person sitting with seatbelt on (flashing) and the person sitting with an inflated airbag in front of them. I ran an OBD2 scan on SRS and got code B1656. Driver seat belt buckle Left Hand. I Investigated the latch and found one wire was snapped off and a couple of inches shorter that the wire that was still connected. I have included 2 pictures of the back end of the seat belt latch. You can see the broken wire and where it use to be connected.

• Oct 31, 2023TXCrash1 injury
  Seats
  Someone rear-ended my Prius and they were driving a Ford 250 truck pulling a large flatbed truck that had a huge box on it. My seat went forward and backwards - I slammed my knee under the dashboard and then slammed by head into the headrest and I could not reach the pedals after this. I have…

  Someone rear-ended my Prius and they were driving a Ford 250 truck pulling a large flatbed truck that had a huge box on it. My seat went forward and backwards - I slammed my knee under the dashboard and then slammed by head into the headrest and I could not reach the pedals after this. I have repeatedly asked the collision center to look at it because there is nothing about it on the report of the estimate of repairs. My adult son was a passenger in the front and his seat didn't move.

• May 12, 2023WI
  Air bags

  Airbag light on

• Mar 10, 2023GA
  Exterior lighting
  The automatic high beams will occasionally fail to operate and are stuck in low beams until about 2 minutes have passed, or until the automatic high beams switch is turned off to disable the system. This seems to be a software issue, as it seems to occur when an approaching vehicle passes by with…

  The automatic high beams will occasionally fail to operate and are stuck in low beams until about 2 minutes have passed, or until the automatic high beams switch is turned off to disable the system. This seems to be a software issue, as it seems to occur when an approaching vehicle passes by with bright lights. When this happens, all high beams are disabled for a couple of minutes, even if the high beam lever is switched to low beams and back to high.

• Jul 6, 2022GA
  Fuel/propulsion system · Power train · Vehicle speed control

  Stopped at red light, then the car didn't accelerate when hitting gas. Engine revs but the car does not accelerate. It happened multiple time when the car was out in sun with full ac on(100f). Happened once in intersection and almost got hit head on

• Jun 22, 2022CA
  Fuel/propulsion system
  UNKNOWN My car started stalling when it comes to a full stop. I.e. if I stop at a red light or stop sign, and I then press the gas, it stalls. It might inch forward, but it doesn’t really accelerate. This happened last year, and I took it to the dealer. They couldn’t reproduce the results, and…

  UNKNOWN My car started stalling when it comes to a full stop. I.e. if I stop at a red light or stop sign, and I then press the gas, it stalls. It might inch forward, but it doesn’t really accelerate. This happened last year, and I took it to the dealer. They couldn’t reproduce the results, and they could only suggest changing my small 12V battery. Today, it stalled 8 times, between 2 short drives. Each at a stop sign only travelling ~5 miles total. I have an appointment at the dealer but this is exactly what happened last year with no diagnosis. No check engine light is on or anything.

• Mar 4, 2021TX29,500 mi
  Visibility/wiper
  My windshield has cracked twice without being struck by an object and without being near another vehicle. Both incidents occurred during normal highway driving. I was not speeding or driving recklessly. Both times required the replacement of the windshield as the crack quickly spread and affected a…

  My windshield has cracked twice without being struck by an object and without being near another vehicle. Both incidents occurred during normal highway driving. I was not speeding or driving recklessly. Both times required the replacement of the windshield as the crack quickly spread and affected a good portion of the windshield. I am requesting reimbursement for the cost of replacing the windshield (twice). The first incident occurred just a few days after purchase. The second incident occurred today, march 4, 2021.

• Feb 22, 2021FL6,800 mi
  Structure › Body · Unknown or other
  On dec 2, 2020 while driving on the freeway at about 45-50 mph our sunroof exploded causing us to get to the side of the road. The shade was closed which saved us from exploding glass. There were no road hazards, no issues other than a spontaneous exploding of our sunroof. The orlando police dept…

  On dec 2, 2020 while driving on the freeway at about 45-50 mph our sunroof exploded causing us to get to the side of the road. The shade was closed which saved us from exploding glass. There were no road hazards, no issues other than a spontaneous exploding of our sunroof. The orlando police dept was summoned and the roadrangers stopped to assist us. I took the car directly to the toyota dealership in clermont, fl and they repaired the glass at no charge but told me had the car not been under manufacturer warranty I would have been responsible for the cost of replacement. If the shade had not been closed the entire passengers within the cabin would have been splattered with shattered glass.

• May 13, 2020NY70,000 miCrash1 injury
  Air bags
  TL* the contact owns a 2018 toyota prius. The contact stated that while driving about 65 mph, another vehicle pulled into the highway, without stopping, and crashed into the front driver's side fender of the contact's vehicle. The contact stated that none of the air bags deployed. There was no…

  TL* the contact owns a 2018 toyota prius. The contact stated that while driving about 65 mph, another vehicle pulled into the highway, without stopping, and crashed into the front driver's side fender of the contact's vehicle. The contact stated that none of the air bags deployed. There was no warning lights illuminated. The contact sustained injuries that required medical attention, including back, neck, ankle and head injuries. He also stated that he ripped the tendon on the ring finger. A police report was filed. The vehicle was totaled and was towed to a tow yard. The dealer was not called. The manufacturer was not made aware of the failure. The failure mileage was approximately 70,000. *Ln*jb

• Jan 2, 2020CA19,100 mi
  Electrical system
  Error codes p0113 and p0102 and warning messages for check engine and ics malfunction* lappeared when starting the garaged vehicle in approximately 55F room temperature. toyota of escondido and toyota's customer care telephone center explained that they will not inspect (although under the…

  Error codes p0113 and p0102 and warning messages for check engine and ics malfunction* lappeared when starting the garaged vehicle in approximately 55F room temperature. toyota of escondido and toyota's customer care telephone center explained that they will not inspect (although under the 3-year/36,000 miles warranty) without a service fee. online, reports that a failing 12V battery may cause multiple codes to be triggered were also met with a request for a $110 diagnostic fee. The battery IS also under the 3-year/36,000 mile warranty. error codes and messages implicate fuel efficiency, pollution and safety issues. *ics IS their collision sensor system.

• Dec 10, 2019MA16,000 mi
  Exterior lighting

  Auto high beam feature intermittently cuts out and then resumes, especially frequently in rainy weather. While off, I cannot engage the high beam without first shutting off the ahb feature. Many similar reports regarding toyota vehicles; see https://www.rav4world.com/threads/auto-high-beam-issues.242329/

• Nov 8, 2019CO26,000 mi
  Exterior lighting · Visibility/wiper
  The car IS inadequate in the winter. when it snows I can't keep the windows clean. they changed the fittings and I can't even put winter blades on the car. Also, and this applies to almost all new cars as well, the led lights freeze over. it's a safety hazard not to have lights that work. and…

  The car IS inadequate in the winter. when it snows I can't keep the windows clean. they changed the fittings and I can't even put winter blades on the car. Also, and this applies to almost all new cars as well, the led lights freeze over. it's a safety hazard not to have lights that work. and it's a safety hazard to have to get out of the car in dangerous conditions to try and scrape ice off the windows and lights. the front and rear lights get caked with ice and snow. this picture IS of my windshield after an hour of warming up. the wipers stay caked with ice. and when I turn them on, this IS what happens. they smear the windshield with ice. they smear it with water too. I can't squeegee water with ice. I'D love to trade it in, but everyone has led lights. they're a safety hazard. and these issues are keeping me from buying a new car. I would appreciate it if you addressed these issues. the car companies won't listen to me. thank you have a great day

• Nov 7, 2019PA25,000 mi
  Exterior lighting
  Automatic high beams dim and then fail to brighten intermittently. when driving, automatic high beams function as intended then the dash indicator spontaneously turns off and the headlights fail to brighten. Vehicle has been to the dealership service department twice for this. The second time…

  Automatic high beams dim and then fail to brighten intermittently. when driving, automatic high beams function as intended then the dash indicator spontaneously turns off and the headlights fail to brighten. Vehicle has been to the dealership service department twice for this. The second time , the dealer was able to duplicate the problem both in my vehicle and in a 2019 prius from the inventory. Toyota technical assistance IS adamant that the problem IS normal functionality. I fail to understand how the high beams not brightening when they should during night driving IS normal functionality.

• Oct 26, 2019MA4,500 miCrash
  Service brakes · Structure › Body

  I was driving up to my garage on the side of my house on a clear day, early afternoon. I was traveling about 3 mph and tried to stop to park in front of the garage door. I depressed the brake pedal and it did not engage, but lurched forward into the garage, crashing into the garage and causing damage to both the garage and the auto.

• Oct 11, 2019HI3,000 mi
  Structure › Body
  The heat shield on the underside of the car, by the storage battery came lose while driving and was damaged. It IS held in place by only four plastic pins. The car IS so low to the ground that it IS hard to clear normal speed bumps let alone older larger ones. We were traveling a housing addition…

  The heat shield on the underside of the car, by the storage battery came lose while driving and was damaged. It IS held in place by only four plastic pins. The car IS so low to the ground that it IS hard to clear normal speed bumps let alone older larger ones. We were traveling a housing addition less than 20 mph and just went over an older high speed-bump and puddle when it occurred. We drove the last 100 or so feet home and wired it up out of the way so the car could be driven at low speed too the dealership. The dealership told us this was damage due to our driving negligence ie: "we hit something". When this shield comes off it falls straight into the vehicle exhaust pipe and ground, there IS no simple way to remove the piece until a full repair can be completed. It must be wired up off the ground or part of the wheel and exhaust must be disconnected. It took the dealership three tries and over a month to get the correct shield in and perform the repair. The part number in the toyota parts specification and the repair parts warehouse or not the same.

• Aug 30, 2019NJ6,000 miCrash
  Vehicle speed control
  TL* the contact owns a 2018 toyota prius. The contact stated that while operating the vehicle the vehicle had experienced unintended acceleration and crashed into a second parked vehicle. No injuries were reported. A police report was taken at the scene. The vehicle was towed to the local dealer…

  TL* the contact owns a 2018 toyota prius. The contact stated that while operating the vehicle the vehicle had experienced unintended acceleration and crashed into a second parked vehicle. No injuries were reported. A police report was taken at the scene. The vehicle was towed to the local dealer dch toyota (1504 us hwy 1 north brunswick nj) but the cause of the failure was not determined. The manufacturer was notified of the failure. The failure mileage was 6,000.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003636Some 2020 2024 Corolla HV, 2017 2022 Prius Prime, and 2016 2022 Prius vehicles equipped with a 2ZR-FXE engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P210015 (Throttle Actuator "A" Control Motor Circuit Short to Battery or Open), or P210019 (Throttle Actuator "A" Control Motor Circuit Current Above Threshold), or P211172 (Throttle Actuator "A" Control System Actuator Stuck Open) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. REVISION NOTICE April 17, 2024 Rev1: The Required Tools & Equipment section has been updated.
• 11003619Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 11003602Some 2020 2024 Corolla HV, 2017 2022 Prius Prime, and 2016 2022 Prius vehicles equipped with a 2ZR-FXE engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P210015 (Throttle Actuator "A" Control Motor Circuit Short to Battery or Open), or P210019 (Throttle Actuator "A" Control Motor Circuit Current Above Threshold), or P211172 (Throttle Actuator "A" Control System Actuator Stuck Open) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003581Some 2020 2024 Corolla HV, 2017 2022 Prius Prime, and 2016 2022 Prius vehicles equipped with a 2ZR-FXE engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P210015 (Throttle Actuator "A" Control Motor Circuit Short to Battery or Open), or P210019 (Throttle Actuator "A" Control Motor Circuit Current Above Threshold), or P211172 (Throttle Actuator "A" Control System Actuator Stuck Open) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. REVISION NOTICE April 17, 2024 Rev1: The Required Tools & Equipment section has been updated.
• 11003564Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
• 11003547Some 2020 2024 Corolla HV, 2017 2022 Prius Prime, and 2016 2022 Prius vehicles equipped with a 2ZR-FXE engine may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P210015 (Throttle Actuator "A" Control Motor Circuit Short to Battery or Open), or P210019 (Throttle Actuator "A" Control Motor Circuit Current Above Threshold), or P211172 (Throttle Actuator "A" Control System Actuator Stuck Open) present. The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251744PANT: Toyota is pleased to announce to all field and dealer personnel that we have launched a new part number to the Toyota Complete Maintenance Care (TCMC) Program, effective February 1, 2024. This new H4 Battery will be phased in over time as inventory levels for the current part number are depleted. Additionally, this new part number will have the same pricing as the current part number and will be drop shipped by an Interstate Battery Distributor.
• 10247820TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32F or 0C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
• 10247796TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32F or 0C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10244111TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10224102TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10220177TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled.
• 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
• 10220154TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
• 10220142OBSOLETE NOTICE May 02, 2022: This bulletin is now obsolete. Please see T-SB-0045-22

Every Toyota Prius model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.