2014 Toyota Prius

Recalls

3 recalls name the 2014 Toyota Prius. Newest first.

• Hybrid propulsion system › Inverter

  Jun 24, 2020NHTSA 20V369000266,638 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2013-2015 Prius and 2014-2017 Prius V vehicles not included in recall 18V-684. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.

  Risk and remedy

  Risk

  An unexpected hybrid power system shut down may increase the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will perform a software update for the hybrid system. If the vehicle has experienced an inverter failure with certain hybrid system faults related to this condition, the inverter assembly will be repaired or replaced, prior to software update. All repairs will be performed free of charge. This recall began July 24, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is 20TB10 / 20TA10.

  Full recall details →

• Hybrid propulsion system

  Oct 4, 2018NHTSA 18V684000807,329 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2014 Toyota Prius and 2012-2014 Toyota Prius V vehicles. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.

  Risk and remedy

  Risk

  If the hybrid system shuts down unexpectedly, it can increase the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unit (ECU) and the hybrid control ECU as necessary, free of charge. The recall began January 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0V. Note: The software updates in this recall are needed even if the vehicle had the software previously updated under recalls 14V-053 or 15V-449.

  Full recall details →

• Electrical system › Software

  Feb 12, 2014NHTSA 14V053000698,457 vehicles

  Toyota is recalling certain model year 2010 through 2014 Prius vehicles. In the affected vehicles, the Intelligent Power Module (IPM) inside the inverter module (a component of the hybrid system) contains transistors that may become damaged from high operating temperatures. If this occurs, various warning lamps will be illuminated on the instrument panel…

  Risk and remedy

  Risk

  The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. The hybrid system could also shut down completely resulting in a vehicle stall, increasing the risk of a crash.

  Remedy

  Toyota will notify owners and dealers will update the software for both the motor/generator control electronic control unit (ECU) and the hybrid control ECU, free of charge. If an owner experiences a failure of the inverter before the vehicle receives updated software, the dealer will repair or replace the inverter assembly with a new one at no charge. The recall began on March 21, 2014. Owners may contact Toyota at 1-800-331-4331.

  Full recall details →

Owner complaints

What owners report most

1. Service brakes96
2. Electrical system33
3. Unknown or other26
4. Engine17
5. Air bags14
6. Vehicle speed control14
7. Structure9
8. Visibility/wiper9
9. Steering8
10. Service brakes, hydraulic8

Latest complaints

• Oct 21, 2026FLCrash
  Forward collision avoidance › Automatic emergency braking · Service brakes · Unknown or other
  The Toyota Prius, models through 2010 - 2015 have a known issue with the Brake Booster (actuator) and ABS Pump where the parts will degrade and break at or around 100,000mi. Toyota issued a bulletin and had a replacement program that covered the part that has since elapsed but has not corrected the…

  The Toyota Prius, models through 2010 - 2015 have a known issue with the Brake Booster (actuator) and ABS Pump where the parts will degrade and break at or around 100,000mi. Toyota issued a bulletin and had a replacement program that covered the part that has since elapsed but has not corrected the issue with existing stock and inventory so the problem remains. When I purchased my car I was the 2nd owner, the car was purchased with roughly 160,000mi. The previous owner had informed me that he already replaced the actuator and ABS pump so I wouldn't have to worry about that repair. All told he said he spent $4000+ on the repair. When the car was driving I heard a high pitched whine. I took it to garages after my OBD tools could not identify the issue, no one had a fix and speculated that it was a power inverter and it was normal. Some weeks later, I was involved in an accident where the car did not stop in time, the brake went spongy and locked up, ABS failed to activate with no warnings or indicators. This is what first led me to suspect something wrong with the ABS. later the persistent whine was loud enough that I could identify that it was hydraulic in nature, pointing to the brakes. Within weeks the whine had stopped and my brake, ABS, and TCS lights came on, on the cluster. My OBD indicated that the ABS pump and Brake actuator were giving codes to the ECM. I replace it, and at about 240,000mi it went out again. Due to the extremely expensive nature of the part I purchased a used part which is now also bad. Toyota informed me that they have no intention of passing a recall notice or fixing the defective part. I would imagine that if the NHSTA looked into crashes involving this model and year group they would see an unusually high trend of these getting into an accident around 100,000mi increments. I believe that a recall should be issued due to the serious safety implications of potential defective cars on the road that may not be able to brake in time.

• Oct 16, 2026TX
  Service brakes
  My vehicle is experiencing the well-known brake booster failure. This started at 90,000 miles, with an increased frequency in the running of the brake booster. It has steadily gotten worse, and now the pump runs with every brake application or every 13 seconds. There is now a hissing sound when…

  My vehicle is experiencing the well-known brake booster failure. This started at 90,000 miles, with an increased frequency in the running of the brake booster. It has steadily gotten worse, and now the pump runs with every brake application or every 13 seconds. There is now a hissing sound when I apply the brakes. I have repeatedly taken this to Toyota dealers and have been told: "The system is working as designed; no issues found". When I asked why the pump runs so frequently. No response. This is a $4,000 repair that Toyota should step up and fix. The next step in the degradation of this part is a loss of brake pressure. I tried resolving this matter with Toyota Corporate and was denied, even though my mileage is well below the extended coverage for this part of 150K miles and 10 years.

• Oct 5, 2026TX
  Service brakes
  Facing brake booster/accumulator leak at ~105,000 miles diagnosed and confirmed by a mechanic at an independent service center. Problem is characterized by a hissing and chirping sound from the brakes. No warning lights appear on the dash, but this is a known problem with the 2014 Prius. Brake…

  Facing brake booster/accumulator leak at ~105,000 miles diagnosed and confirmed by a mechanic at an independent service center. Problem is characterized by a hissing and chirping sound from the brakes. No warning lights appear on the dash, but this is a known problem with the 2014 Prius. Brake system could fail at any time, preventing the car from stopping. Repair of this system requires a >$2,500 payment. Toyota had an extended warranty up to 10 years after the car was purchased or before 150,000 miles. In this situation, the problem showed up after this time (2026), preventing compensation for repairs.

• Sep 12, 2026CA
  Service brakes

  ABS and brake light are on. was on the freeway and when i pressed the brake the wheels got locked and the car made a 360 spin, it almost flipped over

• Sep 4, 2026TX
  Service brakes
  While driving my 2014 Toyota Prius, the BRAKE, ABS, and vehicle stability/traction control warning lights illuminated. There was no crash, injury, or noticeable loss of braking before the warnings appeared, and there were no preceding symptoms. The vehicle was evaluated by Mac Haik Toyota in…

  While driving my 2014 Toyota Prius, the BRAKE, ABS, and vehicle stability/traction control warning lights illuminated. There was no crash, injury, or noticeable loss of braking before the warnings appeared, and there were no preceding symptoms. The vehicle was evaluated by Mac Haik Toyota in League City, TX, an authorized Toyota dealer. They diagnosed DTC C1391, “Abnormal Leak of Accumulator,” and determined that the brake booster and brake booster pump/accumulator assembly require replacement. The dealer advised that the vehicle cannot be driven and is considered down. The vehicle/components are available for inspection upon request. My safety concern is that this is a brake-system malfunction serious enough that an authorized Toyota dealer has determined the vehicle cannot be driven. Toyota previously established Customer Support Program ZJB addressing internal malfunctions of the brake booster and brake booster pump assemblies in 2011–2015 Prius vehicles. Toyota’s documentation specifically identifies C1391 as a diagnostic code associated with this condition. My Prius has only approximately 102,000 miles, well below the program’s 150,000-mile limitation, but is outside its 10-year time limitation. The Toyota replacement part required to repair the brake system is now backordered with no known timeframe for availability. Because Toyota has advised the vehicle cannot be driven, it will remain out of service until the part becomes available. I am reporting this because a previously identified brake-system failure continues to occur after Toyota’s support period expires. I ask NHTSA to consider whether continued C1391 brake booster/accumulator failures in these Prius vehicles warrant further investigation or safety action.

• Aug 3, 2026HI
  Electrical system · Service brakes · Unknown or other
  I am submitting this complaint regarding a serious safety concern involving the brake actuator/booster assembly on my 2014 Toyota Prius. My vehicle has experienced failure of this critical braking component and has been unable to be properly repaired since November due to difficulty obtaining the…

  I am submitting this complaint regarding a serious safety concern involving the brake actuator/booster assembly on my 2014 Toyota Prius. My vehicle has experienced failure of this critical braking component and has been unable to be properly repaired since November due to difficulty obtaining the correct replacement parts. This involves a major safety system required for proper braking operation. Brake actuator/booster assembly. Diagnostic codes: B1206, B2321, C1252, C1253 C1256. Toyota previously acknowledged brake actuator concerns through Customer Support Program ZJB. However, my vehicle is outside the program limits despite experiencing what appears to be the same type of failure reported by many other Prius owners. Since November, I have faced difficulty obtaining the correct parts, reports of nationwide backorders or limited availability, conflicting information regarding updated Toyota part numbers, and concerns about repair providers advertising new OEM parts that may actually be aftermarket or incorrect components. This creates a safety concern because owners experiencing brake failures may be unable to obtain timely repairs using verified, appropriate parts. Repair estimates have ranged from approximately $3,000 to over $4,000, including a Toyota dealership estimate of approximately $4,100. This creates a significant barrier to restoring a vehicle to safe operation, especially involving a component Toyota has previously addressed through a customer support program. I request that NHTSA review this complaint and similar reports to determine whether further investigation is warranted regarding Toyota Prius brake actuator failures, parts availability issues, and whether additional manufacturer action or support is needed. A vehicle’s braking system is a fundamental safety component. Owners should be able to obtain a safe and reliable repair without months of delay or uncertainty regarding replacement parts.

• Jul 17, 2026CA
  Service brakes
  My car experienced a failing brake actuator/accumulator. The first sign was the ABS and break lights accompanied by a whoosing sound. The issue causes intermittent system wide break failure and renders the car undriveable. Toyota had an extended warranty for this issue but that offer was closed by…

  My car experienced a failing brake actuator/accumulator. The first sign was the ABS and break lights accompanied by a whoosing sound. The issue causes intermittent system wide break failure and renders the car undriveable. Toyota had an extended warranty for this issue but that offer was closed by the time my car had the failure even though it was still under 150,000 miles. I believe this is a significant safety issue and should rise to the level of a recall by Toyota.

• Jul 14, 2026CA
  Service brakes

  Brake actuator had been making noises and it finally stopped working on 7/14/26. Thankfully my car was and stopped and parked. The car has 137k miles on it, one owner and no explanation of what caused this. There were no accidents, abuse, or failure to maintenance.

• Jul 2, 2026CA
  Forward collision avoidance › Automatic emergency braking · Service brakes · Unknown or other

  The traction control, abs, and emergency brake light came on. We checked and the code produced was C1391. There’s a humming noise every 10 or so seconds when idle. The humming noise is also present when braking. We did some research and this appears to be an issue with Toyota Prius. We called the dealership and were informed that this was not a known issue. Thank you.

• Jun 17, 2026CA
  Service brakes

  Car is at less than 105k miles and yet brake actuator is failing.

• Jun 1, 2026VA
  Forward collision avoidance › Automatic emergency braking · Service brakes

  ABS, traction control, brake system, and brake lights turned on while driving. Took the car to the mechanic and pulled the code C1391. It seems from other complaints to NHTSA that it is a common issue and quite dangerous, meaning the brake system is failing.

• May 28, 2026CA
  Service brakes

  ABS, brake, and traction warning lights came on. Loss of power brakes/limited manual brake. Extended warranty/customer service outreach did not apply. Car is at 120,000 miles and almost 12 years.

• May 15, 2026CA
  Service brakes

  When the brake is applied, the vehicle accelerates for a fraction of a second before slowing down. I have experienced this when the vehicle is moving slowly, such as in a parking lot.

• Apr 15, 2026MD
  Service brakes
  On April 5, 2026, while driving downhill around a corner in my 2014 Toyota Prius, the brake booster and brake booster pump assembly failed without any prior warning. When I pressed the brake pedal the car did not slow down and instead appeared to accelerate due to a complete loss of braking assist.…

  On April 5, 2026, while driving downhill around a corner in my 2014 Toyota Prius, the brake booster and brake booster pump assembly failed without any prior warning. When I pressed the brake pedal the car did not slow down and instead appeared to accelerate due to a complete loss of braking assist. I was unable to stop the vehicle normally and had to rely on gravity and coasting to slow down, creating a serious risk of collision. There were no warning signs prior to the failure. Immediately after the incident, three warning lights illuminated on the dashboard: the BRAKE light, the ABS light, and the VSC (vehicle stability control) light, which have remained on since. The vehicle was taken to DARCARS Toyota Baltimore, 6007 Eastern Ave, Baltimore, MD 21224, where the failure was confirmed on April 15, 2026. Technician Victor Lawson diagnosed diagnostic trouble code C1391, which is the exact qualifying code listed under Toyota's Customer Support Program ZJB for brake booster and brake booster pump assembly failure (RO# XXX). The vehicle remains at the dealership and is available for inspection. Toyota corporate was contacted and opened case number XXX but declined to cover the repair despite this being a documented issue that Toyota has publicly acknowledged. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Apr 5, 2026GA
  Service brakes
  While driving, three warning lights suddenly appeared on the dashboard . Abs warning, traction light, and break warning light At the same time, the brake pedal became very hard to press, and the vehicle did not slow down as expected. This caused a significant increase in stopping distance, and I…

  While driving, three warning lights suddenly appeared on the dashboard . Abs warning, traction light, and break warning light At the same time, the brake pedal became very hard to press, and the vehicle did not slow down as expected. This caused a significant increase in stopping distance, and I nearly rear-ended the vehicle in front of me. The issue appears to involve the braking system and created an immediate safety risk. No prior warning signs were noticed before this incident. The vehicle has not yet been inspected but is available for inspection upon request.

• Mar 22, 2026HI
  Service brakes
  Subject: Brake Booster/Pump Assembly Failure – Toyota Program ZJB / 23TE07 Description of Incident: I am reporting a failure of the brake booster and pump assembly on my 3rd Generation Prius (82,000 miles). While the vehicle is 11.3 years old, it is well under the 150,000-mile threshold of…

  Subject: Brake Booster/Pump Assembly Failure – Toyota Program ZJB / 23TE07 Description of Incident: I am reporting a failure of the brake booster and pump assembly on my 3rd Generation Prius (82,000 miles). While the vehicle is 11.3 years old, it is well under the 150,000-mile threshold of Toyota’s Customer Support Program ZJB. The brake pump began cycling every 13 seconds, indicating an internal pressure leak in the accumulator. This is a documented precursor to a total loss of power-assist braking. Despite the clear mechanical failure, no warning lamps or Diagnostic Trouble Codes (DTCs) were triggered, creating a safety hazard where the system could fail without prior electronic notification. Repair and Cost Details: Because the vehicle was 1.3 years past the arbitrary 10-year "Secondary Coverage" window, I was forced to pay $3,461.18 out-of-pocket for a known manufacturing defect. I would like to highlight a discrepancy in labor billing: while Toyota’s own technical bulletins (ZJB/23TE07) state the repair should take approximately 5.3 hours, the dealership charged 8.9 hours of labor for the same procedure. Safety Concern: By limiting coverage to 10 years, Toyota has left many low-mileage owners with a critical safety defect that degrades over time regardless of mileage. I request that the NHTSA transition this from a "Customer Support Program" to a formal Safety Recall to ensure all affected vehicles are repaired and owners are reimbursed, regardless of the vehicle's age.

• Mar 15, 2026PA
  Engine
  the cylinder head gasket blew because of the poor design of the intake manifold and the EGR system. There are updated parts to fix this issue, but there was no recall. This poor design led to the vehicle having "the Death Knock." It started doing this knock on my trip driving my daughter to…

  the cylinder head gasket blew because of the poor design of the intake manifold and the EGR system. There are updated parts to fix this issue, but there was no recall. This poor design led to the vehicle having "the Death Knock." It started doing this knock on my trip driving my daughter to college. The engine could have seized in traffic on the way to [XXX] from [XXX] . No warning lights came on telling me there was an issue. The vehicle is being taken apart now to see if my connecting rods were bent from the coolant entering the combustion chamber. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Mar 13, 2026FL152,000 mi
  Service brakes, hydraulic
  The contact owns a 2014 Toyota Prius. The contact stated that while driving at an undisclosed speed, the vehicle failed to slow down as intended with the brake pedal depressed. The ABS warning light was occasionally illuminated. The vehicle was pulled over to the shoulder of the roadway and…

  The contact owns a 2014 Toyota Prius. The contact stated that while driving at an undisclosed speed, the vehicle failed to slow down as intended with the brake pedal depressed. The ABS warning light was occasionally illuminated. The vehicle was pulled over to the shoulder of the roadway and restarted. The vehicle was taken to a local independent mechanic, where it was diagnosed, and determined that the brake master cylinder, brake booster, and brake lines needed to be replaced. The local dealer was contacted; however, the vehicle was not diagnosed or repaired. Upon further investigation, the contact related the failure to an undisclosed recall; however, the VIN was not included in the recall. The manufacturer was notified of the failure. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was approximately 152,000.

• Mar 4, 2026CA
  Service brakes
  Vehicle: 2014 Toyota Prius v Hybrid Mileage: 79,000 miles The vehicle experienced sudden failure of the brake booster / brake accumulator system. Multiple warning lights appeared including ABS, traction control, and the red brake warning light. Diagnostic code C1391 was retrieved. The brake pedal…

  Vehicle: 2014 Toyota Prius v Hybrid Mileage: 79,000 miles The vehicle experienced sudden failure of the brake booster / brake accumulator system. Multiple warning lights appeared including ABS, traction control, and the red brake warning light. Diagnostic code C1391 was retrieved. The brake pedal became soft/spongy and the electric brake pump began cycling frequently. Braking performance felt reduced and inconsistent, creating a potential safety risk. This vehicle has very low mileage (79,000 miles) and has been well maintained. The failure appears to be related to a known defect in the Prius braking system. Toyota previously issued Customer Support Program 20TE07 addressing brake booster and pump failures on 2012–2014 Prius v vehicles. Despite this known issue, the repair is not being covered and the cost quoted is several thousand dollars. A failure of the brake booster/accumulator system significantly affects braking performance and should not occur at this mileage. This appears to be a widespread issue affecting Prius vehicles and represents a potential safety defect involving the braking system.

• Mar 2, 2026GA
  Engine

  Head gasket failure. No check, engine, light or warning. My car was very well maintained regularly. After research, I found this to be a very common problem. Yes it is available for inspection. Upon request. The problem was confirmed by chemical test, ignition vapors going into engine coolant. Other symptoms were misfiring on cylinder two and cylinder four. Severe engine knocking.

• Feb 10, 2026TX
  Service brakes
  The brake booster/accumulator failed on my vehicle. This part was a common failure during the 2010-2015 production run so much so that Toyota extended coverage to replace. Mine failed recently beyond the warranty extension of 10 years/150k miles. My vehicle has only 108k miles and is 15 months…

  The brake booster/accumulator failed on my vehicle. This part was a common failure during the 2010-2015 production run so much so that Toyota extended coverage to replace. Mine failed recently beyond the warranty extension of 10 years/150k miles. My vehicle has only 108k miles and is 15 months beyond warranty. Toyota Corporate will not replace this vital part, despite the fact it was a defective design. I can’t drive it any longer since I don’t have the $4000 to make repair. Toyota Corporate has shown little concern despite this critical safety defect.

• Feb 3, 2026AZ
  Service brakes

  The slip notification, abs, and brake lights turned on while driving on the highway. The brakes then became very stiff and the vehicle did not brake as fast or as well as it normally does without the lights.

• Jan 29, 2026CA
  Service brakes

  2014 Prius HB with 135k miles , onboard system warning lights for Brakes, ABS system, TPMS and Traction Ctrl all came one suddenly. Brake losing pressure while vehicle making strange noise under front driver side

• Jan 28, 2026FL
  Service brakes · Unknown or other
  On Jan 5, 2026 I was driving locally at about 40-45 mph. All of a sudden 3 indicator lights came on ABS, Brake, and Brake System Warning Light. There were no noises, but the brakes felt different. They did stop when needed. I left space between myself and others just in case, did not want an…

  On Jan 5, 2026 I was driving locally at about 40-45 mph. All of a sudden 3 indicator lights came on ABS, Brake, and Brake System Warning Light. There were no noises, but the brakes felt different. They did stop when needed. I left space between myself and others just in case, did not want an accident. Called my regular mechanic. They advised to not drive the car, but to bring it into the shop at 8am the following day. On Jan 6th, the mechanic stated it was beyond their expertise. It was towed to the local Toyota Dealer for repairs. It ended up being the Brake Booster and Pump. Upon investigation online, we saw this was a recall, but we were not notified by Toyota.

• Jan 17, 2026AZ
  Service brakes
  I was driving on the freeway, and a few lights(including ABS, brake lights) all came on and a beeping noise started, as i immediately lost complete control of my brakes! That God it was late, and no cars were in front of me. The car slowed down as I removed my foot of the gas right away. I tried to…

  I was driving on the freeway, and a few lights(including ABS, brake lights) all came on and a beeping noise started, as i immediately lost complete control of my brakes! That God it was late, and no cars were in front of me. The car slowed down as I removed my foot of the gas right away. I tried to pull over as soon as I heard the lights, and that’s when I realized my brakes were completely gone! I was able to stop after about two miles; car stop on its own as it slowed down. Apparently, this was a major known issue and had warranty up to 150k miles. At the time of the incident, my car had about 165k miles. I had the car for years, and no one at the dealer ever mentioned anything about this or even tried to make me aware of it! I called the Toyota dealer and corporate number several times and they declined providing me with any help at all! This caused me fear and traume because I never thought this was possible! It could’ve ended my life and the life of people around me if there were any cars in sight! The problem has been confirmed by a reputable mechanic! He did the repairs! He also called the Toyota dealer and corporate and attempted collecting anything since he found out about the warranty and common issue. They also denied help. No lights were on at all before this incident happened! It all came at once! I even have all records of monthly/ bimonthly complete inspections at the dealer with everything normal on the results!

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Brake Actuator Valve Wear

  DP23005Opened Nov 22, 2023Open
  The Office of Defects Investigation (ODI) has received a petition dated September 19, 2023 from the owner of a 2012 Toyota Prius V requesting that ODI reevaluate its decision to deny DP19-004. In the letter, the petitioner reported experiencing an unexpected and complete loss of brake power while driving, accompanied…

  The Office of Defects Investigation (ODI) has received a petition dated September 19, 2023 from the owner of a 2012 Toyota Prius V requesting that ODI reevaluate its decision to deny DP19-004. In the letter, the petitioner reported experiencing an unexpected and complete loss of brake power while driving, accompanied by multiple dashboard warning lights. This petition is based on the petitioner's direct experience and assessment that ODI closed DP19-004 because its prompting petition was withdrawn by that petitioner. ODI will review the work conducted during DP19-004 and a review of any additional related complaints and crashes via a new defect petition The petition and related materials can be reviewed at NHTSA.gov under the following ODI number:11553736.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

• Brake Actuator Valve Wear

  DP19004Opened Sep 30, 2019Closed Jan 21, 2021
  On September 19, 2019, the Office of Defects Investigation (ODI) received a defect petition from Mr. Roger Hogan requesting that the Agency investigate and recall certain Toyota Prius, Prius PHV, Camry Hybrid and Avalon Hybrid vehicles for a brake actuator valve wear condition covered under Toyota Customer Support…

  On September 19, 2019, the Office of Defects Investigation (ODI) received a defect petition from Mr. Roger Hogan requesting that the Agency investigate and recall certain Toyota Prius, Prius PHV, Camry Hybrid and Avalon Hybrid vehicles for a brake actuator valve wear condition covered under Toyota Customer Support Programs ZJB and ZKK (subject CSP?s). In support of his request, the petitioner identified 117 NHTSA complaints allegedly related to the subject CSP condition, including 60 reporting crashes. On September 30, 2019, ODI opened Defect Petition DP19-004 to evaluate the petitioner?s request for an investigation. In August 2020, the petitioner notified the Agency that he was withdrawing his petition. Because the petitioner has withdrawn the petition, we are denying the petition as moot and no further analysis of this petition is necessary.NHTSA is authorized to issue an order requiring notification and remedy of a defect if the Agency?s investigation shows a defect in the design, construction, or performance of a motor vehicle that presents an unreasonable risk to safety. 49 U.S.C. ?? 30102(a)(9), 30118. Because the petitioner has with withdrawn the petition, the petition is denied as moot. This action does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency notes that it is not required to receive a defect petition prior to opening a defect investigation and will take further action if warranted by future circumstances.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10245488Ti: technical instructions for limited service campaign K0P customer support program 19te12 safety connect system ? Vehicle location inaccurate certain 2013 ? 2019 model year 4runner 2011 ? 2017 model year land cruiser 2013 ? 2017 model year prius 2012 ? 2017 model year prius v 2016 ? 2017 model year mirai updated 010/25/2023
• 10245487DP: The Data Communication Module (DCM) in the subject vehicles are equipped with software to identify the location of the vehicle using the Global Positioning System (GPS) to support features of the Safety Connect system. Due to incorrect programming in the DCM software, after November 2nd, 2019, the GPS coordinates for this system will be calculated incorrectly. This will cause the system to use incorrect vehicle coordinates if one of the system?s features is activated.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10240056DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10240055DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10235236DP: Customer Support Program 20TE10 has been superseded by 23TE03
• 10235232DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10235231DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10235230TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10235229TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10230356TI: 19TE12 Expired on December 1, 2022
• 10230355DP: Customer Support Program 19TE12 expired December 1, 2022.
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement

Every Toyota Prius model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.