2015 Toyota Prius

Recalls

1 recall names the 2015 Toyota Prius. Newest first.

• Hybrid propulsion system › Inverter

  Jun 24, 2020NHTSA 20V369000266,638 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2013-2015 Prius and 2014-2017 Prius V vehicles not included in recall 18V-684. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.

  Risk and remedy

  Risk

  An unexpected hybrid power system shut down may increase the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will perform a software update for the hybrid system. If the vehicle has experienced an inverter failure with certain hybrid system faults related to this condition, the inverter assembly will be repaired or replaced, prior to software update. All repairs will be performed free of charge. This recall began July 24, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is 20TB10 / 20TA10.

  Full recall details →

Owner complaints

What owners report most

1. Service brakes89
2. Electrical system27
3. Unknown or other15
4. Power train13
5. Engine8
6. Forward collision avoidance7
7. Exterior lighting7
8. Vehicle speed control7
9. Air bags6
10. Fuel/propulsion system6

Latest complaints

• Oct 3, 2026CA
  Forward collision avoidance › Automatic emergency braking · Service brakes

  The brake booster pump has malfunctioned, exactly 1 year outside of the secondary coverage supplied in the voluntary customer support program for this exact issue, despite being under 150,000 miles. Now the car is unsafe to drive since the brakes are malfunctioning.

• Sep 17, 2026CA
  Service brakes
  I am reporting an active, severe safety hazard regarding the braking system on my 2015 Toyota Prius ( Mileage: 79,000). The vehicle has been officially diagnosed by Toyota Culver City with Diagnostic Trouble Code DTC C1391, confirming an internal failure and lack of pressure within the brake…

  I am reporting an active, severe safety hazard regarding the braking system on my 2015 Toyota Prius ( Mileage: 79,000). The vehicle has been officially diagnosed by Toyota Culver City with Diagnostic Trouble Code DTC C1391, confirming an internal failure and lack of pressure within the brake booster/actuator assembly. This component defect causes an immediate compromise to the vehicle's braking efficiency and hydraulic pressure, causing a sudden loss of braking power and significantly increasing stopping distances.Toyota was fully aware of this dangerous defect and initiated Customer Support Program ZJB to address it. However, Toyota Brand Engagement Center (Case #260909002032) has explicitly admitted via recorded voicemail that they mailed the safety/defect notification only to a previous owner and failed to notify me. Because they did not cross-reference current registration data, I was never notified of the defect and was deprived of a preemptive remedy before their arbitrary 10-year calendar clock expired. At only 79,000 miles, this critical safety component has failed prematurely, creating an active hazard on public roads. Toyota is refusing to cover the $3,890 repair despite their documented failure to notify the current owner.

• Aug 31, 2026HI
  Service brakes
  Problem: Brake Actuator is pulsing the Booster Pump to keep running intermittently, 5-10 seconds. Console lights lit up for ABS problem. Does not clear. Toyota Dealership Report: DCT C1391 Abnormal Leak: Monitored TEH Accumulator Pressure and its not holding pressure. Pump keeps running.…

  Problem: Brake Actuator is pulsing the Booster Pump to keep running intermittently, 5-10 seconds. Console lights lit up for ABS problem. Does not clear. Toyota Dealership Report: DCT C1391 Abnormal Leak: Monitored TEH Accumulator Pressure and its not holding pressure. Pump keeps running. Rec[ommend] Brake Actuator and Booster Pump Assembly [replacement].` ServCo Toyota dealership in Hawaii Report: Submitted Prior Authorization request with Toyota Hawaii Warranty. Request Denied for Goodwill Coverage on ABS Actuator and Booster Pump.

• Aug 26, 2026NV
  Service brakes
  On XXX, I was driving my 2015 Toyota Prius with my family in the vehicle and approaching stopped traffic on dry pavement. An emergency vehicle was approaching from behind, so I began braking earlier than usual. When I applied the brakes, the vehicle did not stop normally. The front slowed/stopped…

  On XXX, I was driving my 2015 Toyota Prius with my family in the vehicle and approaching stopped traffic on dry pavement. An emergency vehicle was approaching from behind, so I began braking earlier than usual. When I applied the brakes, the vehicle did not stop normally. The front slowed/stopped while the rear of the Prius suddenly slid sideways toward the adjacent lane, bringing the rear passenger side dangerously close to another vehicle. Had I begun braking at my normal stopping distance, I believe a collision would have occurred. No crash or injuries occurred, but the incident was extremely dangerous. I drove the vehicle very slowly to Purrfect Auto Services, [XXX], where the brake/ABS system was diagnosed. I observed diagnostic code C1391. The shop has had the vehicle since XXX and has experienced repeated problems with used replacement brake-system components that were defective or would not function properly. The vehicle has remained unsafe to return to service while the shop works to obtain a properly functioning replacement part. I am reporting this because the sudden and unpredictable braking behavior created a serious risk to my family and other motorists. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Aug 11, 2026CA
  Forward collision avoidance › Automatic emergency braking · Service brakes
  Code DTC C1391 - Abnormal leak of accumulator pressure. Internal failure of the brake booster pump assembly, preventing the system from maintaining proper hydraulic pressure. This means the brakes don't work, putting the driver's and passengers' lives at risk. This DTC C1391 code and problem were…

  Code DTC C1391 - Abnormal leak of accumulator pressure. Internal failure of the brake booster pump assembly, preventing the system from maintaining proper hydraulic pressure. This means the brakes don't work, putting the driver's and passengers' lives at risk. This DTC C1391 code and problem were reproduced and confirmed by an independent service center who specializes in 3rd generation priuses. There were warning lights that lit up when the brakes failed - the ABS, traction control, and brake light all lit up but only after the brakes had stopped working. This is a known manufacturer defect but toyota won't pay to fix it because they put a 10 year limit on first driven date or 150,000 miles. This prius only has 100k miles but toyota still won't stand behind their product even though they have admitted it was a manufacturing defect and they sold a defective product.

• Jul 28, 2026NCCrash1 injury
  Seats

  I was rear-ended by a truck in my prius and my seat laid back on impact. I'm unaware if that was an intended thing or not but it potentially could have injured my neck. My car is currently in a storage lot awaiting the adjustor's inspection so it is available for inspection if needed. No warning lights were available and it hasn't been recreated by the dealer

• Jul 15, 2026CACrash
  Electrical system · Engine
  Pulling out of a parking stall, when put vehicle in drive, the engine revved up and accelerated - vehicle crashed, the brakes did not work- there was skid marks. Floor mats are factory OEM were installed properly. I did not hit the accelerator and I am in good health and mind. I have driving for…

  Pulling out of a parking stall, when put vehicle in drive, the engine revved up and accelerated - vehicle crashed, the brakes did not work- there was skid marks. Floor mats are factory OEM were installed properly. I did not hit the accelerator and I am in good health and mind. I have driving for over 30 years, never had and accident nor a ticket! - A county officer was at the seen and left me with vehicle that had to be towed away. The Vehicle is a total loss. I have insurance but felt that this incident need to be reported, There is no safety recalls and the vehicle was always property maintained

• Jun 25, 2026CA
  Service brakes
  The vehicle experienced a failure in the braking system involving the brake booster/brake actuator assembly. The vehicle displayed diagnostic trouble code C1391, which is associated with a malfunction of the brake booster pump/accumulator system on this model. The failed component is available for…

  The vehicle experienced a failure in the braking system involving the brake booster/brake actuator assembly. The vehicle displayed diagnostic trouble code C1391, which is associated with a malfunction of the brake booster pump/accumulator system on this model. The failed component is available for inspection upon request. The failure created a safety concern because the braking system warning lights illuminated and the vehicle’s brake assist system may not function properly. A malfunction of the brake actuator/booster system could increase stopping distance, reduce braking performance, and create a potential risk of a crash, especially during emergency braking situations. The problem has been confirmed through diagnosis showing the C1391 trouble code. The issue has been identified as a brake system malfunction requiring repair of the brake booster/actuator assembly. The vehicle has been inspected/diagnosed by a service professional. The vehicle has not been inspected by police or insurance representatives. Toyota/dealer inspection information is available if requested. I contacted Toyota regarding the issue, but they declined assistance because the extended warranty coverage expired approximately 7 months prior to the failure. Before the failure, the vehicle operated normally. The first symptoms occurred when multiple warning lights appeared while driving, including the ABS warning light, brake warning light, parking brake warning light (even though the parking brake was not engaged), and the traction control/slippery road warning light. These warning lights appeared suddenly, indicating a problem with the braking system.

• Jun 15, 2026IL205,000 miCrash2 injuries
  Seats
  The contact owns a 2015 Toyota Prius. The contact stated that while driving and coming to a complete stop, the vehicle was rear-ended by another vehicle driving approximately 35-45 MPH. The contact stated that upon impact, the front driver's seat unexpectedly reclined and struck the rear…

  The contact owns a 2015 Toyota Prius. The contact stated that while driving and coming to a complete stop, the vehicle was rear-ended by another vehicle driving approximately 35-45 MPH. The contact stated that upon impact, the front driver's seat unexpectedly reclined and struck the rear passenger’s seat. The contact was concerned about the movement of the seat and stated that an occupant seated directly behind the driver's seat could have been injured. The rear bumper, trunk, and rear body structure sustained damage from the crash. The contact stated that the force of the impact caused the rear driver’s side body panels to flare outward and become deformed. No additional property damage had occurred from the crash. The vehicle remained in the roadway following the crash. There was no warning light illuminated. The contact sustained neck injuries, whiplash, and emotional trauma from the crash. Medical attention was sought. The Uber passenger inside the vehicle was also transported from the scene to seek medical attention and treatment; however, the extent of the injury was unknown. The contact considered the vehicle a total loss by the contact, but the vehicle was not declared a total loss. The vehicle was towed to a tow yard. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 205,000.

• Jun 10, 2026AZ121,000 mi
  Service brakes, hydraulic
  The contact owns a 2015 Toyota Prius. The contact stated that while driving at 45 MPH, the brake warning lights illuminated. The brakes were inoperable and entered manual mode. The contact stated that the brake warning lights were red and yellow. The vehicle was taken to Brake Masters, where it was…

  The contact owns a 2015 Toyota Prius. The contact stated that while driving at 45 MPH, the brake warning lights illuminated. The brakes were inoperable and entered manual mode. The contact stated that the brake warning lights were red and yellow. The vehicle was taken to Brake Masters, where it was diagnosed with brake actuator failure. The local dealer was contacted but did not provide assistance. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 121,000.

• Jun 9, 2026GA
  Electrical system · Service brakes
  The incident involved having to press extremely hard on the brake pedal to stop the car, while it was uphill in the middle of the road. The car started going backward and was throwing ABS, Master Warning Light, Brake System Warning Light and Warning Buzzer, Brake System Warning Light, and SLIP…

  The incident involved having to press extremely hard on the brake pedal to stop the car, while it was uphill in the middle of the road. The car started going backward and was throwing ABS, Master Warning Light, Brake System Warning Light and Warning Buzzer, Brake System Warning Light, and SLIP Indicator signals. This was a highly distraughtful situation on the road. Diagnostics showed C1391 Diagnostic Trouble Code on the 2015 Toyota Prius: brake booster and brake booster pump problem. When pressing the brake pedal there is a high pitched metal scraping noise. Toyota coverage program is only applicable for 10 years from the date of first use or 150,000 miles, whichever occurs first. Many cars run well for over 10 years with good care, so the 10 year cap barely covers anything. This is highly unfair and borderline scamming for an issue so severe, which can cause big accidents on the road. In all honesty, this is a life or death situation when it comes to not being able to properly brake while driving. This should be a full recall!!

• Jun 3, 2026GA
  Electrical system · Service brakes
  The brake pump and actuator on my 2015 prius has been faulty and the repair was apparently covered under the customer support program but it expired in December. I had no knowledge of it and when I took my car in to a toyota dealership, no one told me about about the profram but told me that they…

  The brake pump and actuator on my 2015 prius has been faulty and the repair was apparently covered under the customer support program but it expired in December. I had no knowledge of it and when I took my car in to a toyota dealership, no one told me about about the profram but told me that they needed to be replaced. I did not get the repair because of the hefty cost and I missed the deadline. My safety and the safety of other drivers were put at risk for not allowing me to be notified by it and my car being at risk for my brakes failing at any time. Their were absolutely no warning lights on my vehicle as well.

• May 30, 2026CA
  Structure › Body

  The factory clear coat has delaminated

• May 28, 2026NH
  Unknown or other

  Unknown

• May 26, 2026CA
  Forward collision avoidance › Automatic emergency braking · Service brakes

  Code C1391 200k miles All the warning signs for brake booster issue came up. The cost is too high and I just missed the Customer Support Program timelines because the code came up late. This needs to be a RECALL, based on how many people experience this issue consistently.

• May 26, 2026CA
  Service brakes
  I was driving my 2015 prius for years and occasionally the brake, abs and traction light would come on this is a sign of a failing Brake actuator and booster. Toyota and the Ntsb ordered the following warranty enhancement https://static.nhtsa.gov/odi/tsbs/2020/MC-10181800-9999.pdf My Brake…

  I was driving my 2015 prius for years and occasionally the brake, abs and traction light would come on this is a sign of a failing Brake actuator and booster. Toyota and the Ntsb ordered the following warranty enhancement https://static.nhtsa.gov/odi/tsbs/2020/MC-10181800-9999.pdf My Brake Booster had been exhibiting signs of failing for years and I tried to get a toyota dealership to replace and repair the parts under the warranty extension but I was told I had to wait until I had perminent dash lights and trouble codes. So I had to wait till the booster completely failed. By that time my car had exited the extended warranty perimeters and I am told it is no longer eligible.... even though the components are faulty from the factory and exhibited signs of failure many years prior. I was told to wait until the compenent failed by multiple dealers. My car was in motion and the brake boosters failed, fortunatly it did not cause an accident but this is a serious safety issue. Toyota should have done a compleat recall of the brake actuator and booster pump, rather than have drivers use known faulty components until failure. Toyota corporate has refused to help in the repair of the vehicle despite it showing failure for years.

• May 10, 2026CA
  Service brakes
  Toyota Prius has a known problem with the brake actuator and booster. A notice was sent out in 2019 under the Customer Support Program Expansion with repairs up to 10 years or 150k miles. This is a safety issue and should be covered under a recall with NO TIME OR MILEAGE LIMITS since these problems…

  Toyota Prius has a known problem with the brake actuator and booster. A notice was sent out in 2019 under the Customer Support Program Expansion with repairs up to 10 years or 150k miles. This is a safety issue and should be covered under a recall with NO TIME OR MILEAGE LIMITS since these problems are not showing up until after 10 years if the car has low mileage, as in our case. We just passed the 10 year mark, but only has 114k miles. No mention of repairs needed were made during regular maintenance visits with Toyota. Additionally, preventative repairs were not offered if the vehicle did not seem to be experiencing problems at that time. The brakes are spongy and unresponsive. The ABS light , traction warning lights, and parking brake lights are staying on.

• May 7, 2026CA
  Service brakes

  ABS braking system suddenly not working. ABS, BRAKE, and traction control lights all turned on.

• May 6, 2026CA
  Service brakes
  On 4/16/26, while driving my 2015 Toyota Prius (approximately 87,000 miles) on the freeway, I applied the brakes while transitioning from the [XXX] onto the [XXX] . As I veered right on the curved onramp, the brakes failed to engage properly, causing the vehicle to spin out of control and collide…

  On 4/16/26, while driving my 2015 Toyota Prius (approximately 87,000 miles) on the freeway, I applied the brakes while transitioning from the [XXX] onto the [XXX] . As I veered right on the curved onramp, the brakes failed to engage properly, causing the vehicle to spin out of control and collide with the side railing. There were fortunately no nearby vehicles on the 2-lane onramp at the time. Under slightly different circumstances, this incident could easily have resulted in serious injury or death to myself and/or others. No airbags deployed. Although I was physically unharmed, I was extremely shaken by the incident. Immediately after the collision, the brake warning light, ABS warning light, and another warning indicator illuminated on the dashboard. Prior to the incident, I had not experienced braking problems severe enough to suggest imminent failure. On 4/17/26, I brought the vehicle to Toyota of Cerritos for diagnostic evaluation. I was informed that the brake booster was the issue and that the vehicle was unsafe to drive. The vehicle was towed to a collision repair center affiliated with my insurance company. After repairing the external collision damage, the collision center informed me that the brake booster malfunction that caused the incident could not be repaired there and would require dealership service. External repair alone: $3706, in addition to increased automobile insurance premiums expected over the next 3 years. I also contacted Toyota Motor Corporation regarding Customer Support Program coverage related to brake booster issues and was informed that the program expired in 2025 and no assistance would be provided. I am submitting this report because this brake booster malfunction created a serious and unexpected safety hazard resulting in loss of vehicle control on a freeway interchange. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Mar 20, 2026NC
  Service brakes
  My brake actuator and brake booster are failing. All of my dashboard lights have come on (brake, ABS, Traction Control, brake system warning light). Unfortunately, I am over 10 years and Toyota is saying that I need to pay out of pocket for the repairs. This is a known problem and should be…

  My brake actuator and brake booster are failing. All of my dashboard lights have come on (brake, ABS, Traction Control, brake system warning light). Unfortunately, I am over 10 years and Toyota is saying that I need to pay out of pocket for the repairs. This is a known problem and should be covered. I was unaware of the known issue and my car didn't start having problems until after the 10 year mark. I am under 150,000 miles.

• Mar 20, 2026CA
  Service brakes

  Brake Booster and ABS, Brake Master Cylinder went out in car without any lights or warning while driving the vehicle at a moderate speed on Freeway. I was able to avoid an accident and take the car to a repair shop in which at 119K miles and just at 10.5 yrs old the entire brake system had to be replaced/repaired.

• Mar 20, 2026LA
  Forward collision avoidance › Automatic emergency braking · Service brakes
  In June 2025, while driving on the highway, the vehicle suddenly displayed multiple brake warning lights and warning messages, including the red brake warning light, ABS light, brake system warning light, and traction/slip indicator. At the same time, the brake pedal became stiff and braking effort…

  In June 2025, while driving on the highway, the vehicle suddenly displayed multiple brake warning lights and warning messages, including the red brake warning light, ABS light, brake system warning light, and traction/slip indicator. At the same time, the brake pedal became stiff and braking effort increased suddenly, creating a near-crash situation because the vehicle did not slow normally. Before that incident, the vehicle had already been making abnormal brake-related noises, including a humming/pumping noise when the brake pedal was applied, and there were intermittent episodes where braking felt abnormal. In June 2025, the vehicle was taken to a Toyota dealership during Toyota’s brake booster support program period. The dealership documented customer complaints of “humming noise in cabin when holding foot on the brakes,” a request to “scan for codes for ZJB enhancement,” and that the “vehicle hard to accelerate and brakes got stiff,” but stated that no qualifying ABS codes were present at that time. In March 2026, the same condition returned and worsened. The vehicle again displayed the red brake warning light, ABS light, brake system warning light, and traction/slip light, and braking performance was reduced. An OBD scan of the ABS control unit showed code C1391, which is associated with brake booster / ABS actuator failure. The Toyota dealership has now diagnosed the vehicle with ABS actuator and brake booster failure and quoted repair. This is a serious safety issue because braking became more difficult while driving, including on the highway, with sudden warning lights and degraded stopping ability. The failed components are available for inspection. The problem has now been confirmed by a Toyota dealership. The issue was reported to a Toyota dealership during the prior support-program period but was not confirmed then.

• Mar 13, 2026CA
  Service brakes

  TOYOTA PRIUS ABS BRAKE PUMP ACTUATOR BOOSTER FAILING Making hissing noises and warning icon at only 10 years 9 month, 85,000 miles. Toyota extended warranty is NOT covering.

• Feb 21, 2026IL
  Service brakes

  On Feb. 19, 2026, I went to an auto repair store to change oil. I was told that I need to have rear brake pad and rotor replacement service because my car does not have it. The mechanic showed me and said that I only have the front brake work and it can cause safety issue.

• Feb 19, 2026FL
  Service brakes
  Inferior brake system on 2015 Prius master brake cylinder and vacuum booster. Extended warranty issues identified by Toyota for 10 years or 150, 000 miles. I bought my Prius used in 2021 with 92,000 miles at age [XXX] old intending it to last as long as I did. I am now [XXX] old and essentially…

  Inferior brake system on 2015 Prius master brake cylinder and vacuum booster. Extended warranty issues identified by Toyota for 10 years or 150, 000 miles. I bought my Prius used in 2021 with 92,000 miles at age [XXX] old intending it to last as long as I did. I am now [XXX] old and essentially totally independent. The above mentioned parts were identified as not functioning properly on 2/3/2026 (mileage 139, 106). On 2/6/26, I took it to Goettle Toyota, Ocala FL (mileage. 139,160) knowing there was an extended warranty program available that was admitting the parts were defective but not worthy of recall. I was advised the warranty for my vehicle expired 10/26/2025 (3 months and 8 days prior) and was now invalid. Brake replacement cost is $3675.00 + tax🥴. I was provided warranty information and instructed to call Toyota. I called, spoke with Brook and was advised the warranty was invalid due to date even though the car has less than the 150, 000 mile covered and nothing could be done. I was never notified of this issue so I could monitor for problems before the expiration. Average life for these items on a Prius is 250,000 miles, not 139, 000. I am on limited, fixed income and cannot afford this unnecessary repair. I am already gladly driving a 10 year old car to be independent. Loss of transportation changes my entire lifestyle. I cannot afford another car (if I could, I would be fixing this one). I would be reliant FOR THE REST OF MY LIFE, on others for all needs outside of my home. I live in a very rural area. I feel since I was NEVER notified of any issues and the car is LOW mileage and there should be another 100,000 miles on this car (I have driven it less than 50,000 miles in 5 years) that Toyota should honor the extended warranty based on the proximity of the malfunction to the ending of the warranty period and the LOW MILEAGE of the vehicle. This amount of money is NOTHING to Toyota but it is LIFE CHANGING to this, up until now, independent woma INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFOR

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Brake Actuator Valve Wear

  DP23005Opened Nov 22, 2023Open
  The Office of Defects Investigation (ODI) has received a petition dated September 19, 2023 from the owner of a 2012 Toyota Prius V requesting that ODI reevaluate its decision to deny DP19-004. In the letter, the petitioner reported experiencing an unexpected and complete loss of brake power while driving, accompanied…

  The Office of Defects Investigation (ODI) has received a petition dated September 19, 2023 from the owner of a 2012 Toyota Prius V requesting that ODI reevaluate its decision to deny DP19-004. In the letter, the petitioner reported experiencing an unexpected and complete loss of brake power while driving, accompanied by multiple dashboard warning lights. This petition is based on the petitioner's direct experience and assessment that ODI closed DP19-004 because its prompting petition was withdrawn by that petitioner. ODI will review the work conducted during DP19-004 and a review of any additional related complaints and crashes via a new defect petition The petition and related materials can be reviewed at NHTSA.gov under the following ODI number:11553736.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

• Brake Actuator Valve Wear

  DP19004Opened Sep 30, 2019Closed Jan 21, 2021
  On September 19, 2019, the Office of Defects Investigation (ODI) received a defect petition from Mr. Roger Hogan requesting that the Agency investigate and recall certain Toyota Prius, Prius PHV, Camry Hybrid and Avalon Hybrid vehicles for a brake actuator valve wear condition covered under Toyota Customer Support…

  On September 19, 2019, the Office of Defects Investigation (ODI) received a defect petition from Mr. Roger Hogan requesting that the Agency investigate and recall certain Toyota Prius, Prius PHV, Camry Hybrid and Avalon Hybrid vehicles for a brake actuator valve wear condition covered under Toyota Customer Support Programs ZJB and ZKK (subject CSP?s). In support of his request, the petitioner identified 117 NHTSA complaints allegedly related to the subject CSP condition, including 60 reporting crashes. On September 30, 2019, ODI opened Defect Petition DP19-004 to evaluate the petitioner?s request for an investigation. In August 2020, the petitioner notified the Agency that he was withdrawing his petition. Because the petitioner has withdrawn the petition, we are denying the petition as moot and no further analysis of this petition is necessary.NHTSA is authorized to issue an order requiring notification and remedy of a defect if the Agency?s investigation shows a defect in the design, construction, or performance of a motor vehicle that presents an unreasonable risk to safety. 49 U.S.C. ?? 30102(a)(9), 30118. Because the petitioner has with withdrawn the petition, the petition is denied as moot. This action does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency notes that it is not required to receive a defect petition prior to opening a defect investigation and will take further action if warranted by future circumstances.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10245488Ti: technical instructions for limited service campaign K0P customer support program 19te12 safety connect system ? Vehicle location inaccurate certain 2013 ? 2019 model year 4runner 2011 ? 2017 model year land cruiser 2013 ? 2017 model year prius 2012 ? 2017 model year prius v 2016 ? 2017 model year mirai updated 010/25/2023
• 10245487DP: The Data Communication Module (DCM) in the subject vehicles are equipped with software to identify the location of the vehicle using the Global Positioning System (GPS) to support features of the Safety Connect system. Due to incorrect programming in the DCM software, after November 2nd, 2019, the GPS coordinates for this system will be calculated incorrectly. This will cause the system to use incorrect vehicle coordinates if one of the system?s features is activated.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10240056DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10240055DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10235236DP: Customer Support Program 20TE10 has been superseded by 23TE03
• 10235232DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10235231DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10235230TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10235229TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10230356TI: 19TE12 Expired on December 1, 2022
• 10230355DP: Customer Support Program 19TE12 expired December 1, 2022.
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement

Every Toyota Prius model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.