2021 Ford F-350 SD
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › F-350 SD › 2021
These records cover every 2021 Ford F-350 SD. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
15 recalls name the 2021 Ford F-350 SD. Newest first.
Ford Motor Company (Ford) is recalling certain 2020-2022 F-Super Duty F250, F350, F450, F550, 2021-2022 F600, and 2022 F750 vehicles previously repaired incorrectly under recall number 24V957. Biodiesel deposits may form on the pump drivetrain roller components, which could lead to failure of the high pressure fuel pump.
Risk and remedy
Risk
High pressure fuel pump failure can cause a loss of drive power, increasing the risk of a crash.
Remedy
Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed mailed April 7, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S17. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 18, 2026.
Ford Motor Company (Ford) is recalling certain 2020-2022 F-250 SD, F-350 SD, and F-450 SD vehicles. The 360-degree view camera system may not display a rearview image properly in certain lighting conditions.
Risk and remedy
Risk
A rearview camera image that does not display properly can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will update the image processing module software, free of charge.This will be a phased campaign, with the remedy becoming available in different phases based on model years. Interim letters notifying owners of the safety risk were mailed on October 30, 2025. Additional letters will be mailed once the remedy is available on each phase. Owner notification letters were mailed May 19, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA8. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 13, 2025.
Ford Motor Company (Ford) is recalling certain 2020-2021 F-250, F-350, and F-450 vehicles. The steering column upper shaft may detach from the steering column and result in a loss of steering control.
Risk and remedy
Risk
A loss of steering control increases the risk of a crash.
Remedy
Dealers will inspect the steering column, and repair or replace the upper shaft as necessary, free of charge. Owner notification letters were mailed February 20, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S94. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 23, 2025.
Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Risk and remedy
Risk
An engine stall increases the risk of a crash.
Remedy
Dealers will replace the low pressure fuel pump on super duty vehicles and update the powertrain control module (PCM) software on all other affected vehicles, free of charge. Owner notification letters were mailed July 27, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Ford Motor Company (Ford) is recalling certain 2021 Expedition, 2021-2022 Super Duty F-250, F-350, F-450, F-550, F-600, and 2020-2022 Lincoln Corsair vehicles. The rearview camera may display a blank or distorted image.
Risk and remedy
Risk
Rearview camera failure can reduce the driver's view of what is behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will replace the rearview camera as necessary, free of charge. Owner notification letters were mailed September 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S05.
Ford Motor Company (Ford) is recalling certain 2020-2022 F-Super Duty F250, F350, F450, F550, F600, and 2021-2022 F-650, F750 vehicles. Biodiesel deposits may form on the pump drivetrain roller components, which could lead to failure of the high pressure fuel pump.
Risk and remedy
Risk
High pressure fuel pump failure can cause a loss of drive power, increasing the risk of a crash.
Remedy
Dealers will update the powertrain control module (PCM) and Transmission Control Module (TCM) software, free of charge. Owner notification letters were mailed January 23, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S78.
Ford Motor Company (Ford) is recalling certain 2018-2023 Expedition and Lincoln Navigator vehicles equipped with third-row seating; and 2019-2023 F-Super Duty F-250, F-350, F-450, and F-550 SuperCab vehicles. The owner's manual does not include instructions for adjusting or removing certain head restraints. As such, these vehicles fail to comply with the…
Risk and remedy
Risk
Without instructions, the head restraints may be improperly adjusted, increasing the risk of injury in the event of a crash.
Remedy
Ford will mail the Owner's Manual addendums that describe how to adjust and remove the head restraints for the center seating positions, free of charge. Owner notification letters were mailed July 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C20.
Ford Motor Company (Ford) is recalling certain 2020-2021 F-150, Expedition, 2020-2022 Super Duty F-250, F-350, F-450, F-550, and 2020-2021 Lincoln Navigator vehicles. The windshield wiper arms may break, causing the windshield wipers to fail.
Risk and remedy
Risk
Inoperative windshield wipers can reduce visibility in certain driving conditions, increasing the risk of a crash.
Remedy
Dealers will replace both front windshield wiper arms, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed on May 24, 2022. Remedy parts are expected to be available 3rd Quarter 2022. Owner notification letters were mailed on October 21, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S26.
Ford Motor Company (Ford) is recalling certain 2017-2022 F-250 and F-350 Super Duty vehicles equipped with gasoline engines and aluminum driveshafts. Underbody heat and noise insulators may loosen and contact the aluminum driveshaft, which could damage the driveshaft and cause it to fracture.
Risk and remedy
Risk
A fractured driveshaft can cause a loss of drive power, or a loss of vehicle control if the driveshaft contacts the ground. Additionally, unintended movement could occur while parked if the parking brake is not engaged. Any of these scenarios can increase the risk of a crash.
Remedy
Dealers will inspect and repair the driveshaft as necessary, and properly attach the underbody insulators, free of charge. Owner notification letters were mailed on April 7, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S09.
Ford Motor Company (Ford) is recalling certain 2021 Super Duty F-250, F-350, F-450, F-550, F-600, and Medium Duty F-650 and F-750 vehicles equipped with 6.7L diesel engines. A small void may be present in the top-center of the vehicle's underhood secondary fuel filter cap, which may progress to a pinhole over time, allowing fuel to leak from the top of the…
Risk and remedy
Risk
A fuel leak in the presence of an ignition source can increase the risk of a fire or injury.
Remedy
Dealers will replace the primary and secondary fuel filters, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S01.
Ford Motor Company (Ford) is recalling certain 2020-2021 F-350 Super Duty pickup trucks equipped with 6.7L diesel engines and Dana model 275 rear axles. The rear axle housing may not support the load of the pickup truck and deform, which could result in driveshaft separation.
Risk and remedy
Risk
Driveshaft separation may result in a loss of drive power, or unintended vehicle movement if the vehicle is in park without the parking brake applied, increasing the risk of a crash.
Remedy
Dealers will inspect the axle housing for deformities, and repair or replace the housing, as necessary, free of charge. Owner notification letters were mailed on September 3, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall 21S31.
Ford Motor Company (Ford) is recalling certain 2021 F-350, F-450, F-550, and F-600 vehicles equipped with dual rear wheels and front wheel hub extenders. The front wheel hub extenders may be improperly attached to the front rotor hub assemblies, which could result in separation of the wheels and wheel extenders from the vehicle.
Risk and remedy
Risk
A detached wheel and wheel extender can increase the risk of a crash.
Remedy
Owners are instructed not to drive their vehicles until the torque of the wheel extender nuts can be verified. Dealers will inspect and tighten the front wheel hub extender nuts, free of charge. Owner notification letters were mailed on June 18, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S26.
Ford Motor Company (Ford) is recalling certain 2021 Super Duty F-350 and F-450 vehicles equipped with a fifth wheel left-hand mounting bracket that may be cracked.
Risk and remedy
Risk
A cracked mounting bracket could result in the fifth wheel detaching from the vehicle while towing, increasing the risk of a crash.
Remedy
Dealers will inspect the mounting bracket, and replace the bracket if necessary, free of charge. Owner notification letters were mailed on June 16, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S23.
Ford Motor Company (Ford) is recalling certain 2021 F-150 and 2020-2021 F-250, F-350, F-450, and F-550 Super Duty vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS)…
Risk and remedy
Risk
In the event of a crash, if the windshield separates from the vehicle, it can increase the risk of injury.
Remedy
Ford will notify owners, and dealers will remove and reinstall the windshield, free of charge. The recall began April 16, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C06.
Icon Vehicle Dynamics, LLC (Icon) is recalling all 05-UP FSD 2.5 Centerline Stabilizer Kits with part number 65050. The kits were sold as an accessory for certain 2005-2021 Ford F-250 4X4 and F-350 4X4 pickup trucks. The foam ring inside the stabilizer "through shaft" may block the piston ports, possibly causing the steering to lock up.
Risk and remedy
Risk
If the steering locks, it can increase the risk of a crash.
Remedy
Icon will notify owners, and dealers will install a new shock assembly with a revised foam ring and steel support disc, free of charge. The recall began December 21, 2020. Owners may contact Icon customer service at 1-951-689-4266.
Owner complaints
98 complaints1 involved a crash4 involved a fire3 injuries
What owners report most
Latest complaints
- Engine · Fuel/propulsion system
Failed Component & Availability for Inspection: The Bosch CP4 high-pressure fuel pump (HPFP) failed internally, shedding metallic debris throughout the entire fuel system. This matches the exact defect in NHTSA Recall 24V-957 and Ford Safety Recalls 24S78 and 26S17. The failing CP4 pump and eight…
Failed Component & Availability for Inspection: The Bosch CP4 high-pressure fuel pump (HPFP) failed internally, shedding metallic debris throughout the entire fuel system. This matches the exact defect in NHTSA Recall 24V-957 and Ford Safety Recalls 24S78 and 26S17. The failing CP4 pump and eight injectors were replaced on 03/14/2026 (Eastpointe Invoice #5997) due to contamination. The truck is located at Bob Maxey Ford in Detroit, MI, and is available for inspection alongside work orders from an authorized Ford dealership and two independent facilities. Safety Risk: The failure caused an abrupt, total loss of motive power on an active highway off-ramp, followed by an immediate no-start stall. Coasting without motive power across traffic lanes created an imminent collision hazard before the truck was towed by Troy’s Towing on 06/05/2026 (Invoice #34647). Problem Confirmation: •03/14/2026: Eastpointe replaced the failed CP4 pump and eight injectors (Inv #5997). •04/07/2026: Bill Brown Ford pulled DTC P228F, found debris on the regulator screen, and advised full fuel system replacement (RO #80302). •04/29/2026: Eastpointe confirmed metal contamination upon teardown (Inv #6342). •05/14/2026: Diesel’s Place found metal shavings on the regulator valve (Inv #2118). •Current: Bob Maxey Ford scanned DTC P0087 but reported no debris, contradicting prior documentation. Inspections: Bill Brown Ford inspected the vehicle on 04/07/2026 and documented debris. Bob Maxey Ford retrieved DTC P0087—a qualifying code for full fuel system replacement under Ford Recall 26S17—yet Ford Corporate denied coverage based on their claim of no metal shavings. Warning Signs & Timeline: In March 2026, the Check Engine Light illuminated with severe engine jerking (pump/injectors replaced 03/14). Bill Brown Ford confirmed DTC P228F and screen debris on 04/07. Metal shavings were reconfirmed on 05/14, leading to a highway stall/no-start on 06/05 and a stored DTC P0087 at Bob Maxey.
- Fuel system, diesel
The contact owns a 2021 Ford F-350 SD. The contact stated that while driving 50 MPH, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The engine seized, and the vehicle was pulled over to the shoulder of the roadway. The contact stated that while…
The contact owns a 2021 Ford F-350 SD. The contact stated that while driving 50 MPH, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The engine seized, and the vehicle was pulled over to the shoulder of the roadway. The contact stated that while attempting to start the vehicle, the vehicle failed to start. The vehicle was towed to the dealer, where it was diagnosed with high-pressure fuel pump failure. The contact was informed that the high-pressure fuel pump needed to be replaced. In addition, the contact was informed that a repair request had been submitted to the manufacturer; however, the request was denied. The contact was informed that the failure codes displayed were not associated with an unrepaired recall. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The manufacturer was contacted by phone, and a case was filed. The failure mileage was approximately 89,545.
- Fuel/propulsion system
The high pressure fuel pump failed sending metal shavings through out the entire fuel system. I had no heads up and the failure left me stranded on top of a bridge. I called 911 twice and finally the cops showed up and wrecker towed me off the bridge. Ford is aware of this known issue with this…
The high pressure fuel pump failed sending metal shavings through out the entire fuel system. I had no heads up and the failure left me stranded on top of a bridge. I called 911 twice and finally the cops showed up and wrecker towed me off the bridge. Ford is aware of this known issue with this make and model, and even put a recall partial recall / quick fix to increase the flow around the pump to keep it cooler. I had the quick fix recall completed but it did not prevent the failure and me being stranded on a bridge.
- Fuel system, diesel
The contact owns a 2021 Ford F-350 SD. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The contact stated that while driving 20 MPH, the message "Reduced Power" was displayed, and the check engine warning light was illuminated. The vehicle stalled and…
The contact owns a 2021 Ford F-350 SD. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The contact stated that while driving 20 MPH, the message "Reduced Power" was displayed, and the check engine warning light was illuminated. The vehicle stalled and failed to restart. The vehicle was towed to a dealer and was diagnosed with failures of the CP4 fuel pump, cycloid filters, and contamination of the entire fuel system. The vehicle was not yet repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 30,000.
- Fuel/propulsion system
Vehicle went into limp mode and we towed it to the dealership. They ran diagnostics and found that the fuel filter was causing a fault for water in the fuel filter. They replaced the fuel filter and ran diagnostics again and it flagged failure for Low pressure fuel pump. They replaced the low…
Vehicle went into limp mode and we towed it to the dealership. They ran diagnostics and found that the fuel filter was causing a fault for water in the fuel filter. They replaced the fuel filter and ran diagnostics again and it flagged failure for Low pressure fuel pump. They replaced the low pressure fuel pump and reran diagnostics. When they reran diagnostics it flagged for High pressure fuel pump failure and now they are in the process of tearing it down to the point of failure to find out the cause. My vehicles vin was not included in the original recall and believe that it should have been included.
- Electrical system
I was driving my truck home when it completely shut off, I lost all power to everything, including the power steering brakes. When I got home, I did some research on the Internet to see possible causes. Apparently there is a service bulletin for the fuse box having water getting into it from the…
I was driving my truck home when it completely shut off, I lost all power to everything, including the power steering brakes. When I got home, I did some research on the Internet to see possible causes. Apparently there is a service bulletin for the fuse box having water getting into it from the cowl of the hood, which states it can do exactly what happened to my truck? You can also keep your truck running and not shutting off and just to hold host of other safety issues with the service bulletin. . So I brought my truck in to get diagnosed by Ford and they did indeed say it was the fuse box under the hood that got water into it and shorted it out. Ford would not cover this part even though I have a factory extended warranty, annoying this is a common issue for 2020 to 2022 Ford trucks they issued a recall on expeditions in a couple other vehicles, but not Ford trucks specifically the super duties. How is this? OK that they don’t tell a customer who purchased a vehicle that this could potentially happen and then when it happens, they refuse to cover anything even though it’s their fault why it happened.
- Fuel system, diesel
The contact owns a 2021 Ford F-350. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed, but the vehicle failed to accelerate as intended. The vehicle was driven to the shoulder of the road, where it lost motive power. The message "Reduced Engine…
The contact owns a 2021 Ford F-350. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed, but the vehicle failed to accelerate as intended. The vehicle was driven to the shoulder of the road, where it lost motive power. The message "Reduced Engine Power" was displayed, and the check engine warning light was illuminated. The contact stated that the failure occurred while a fifth wheel RV was hitched to the vehicle. The vehicle was towed to the dealer, where it was diagnosed that the high-pressure fuel pump had failed and needed to be replaced. The vehicle was not repaired. The contact was informed that the manufacturer denied covering the repair under NHTSA Campaign Number: 24V957000 (Fuel System, Diesel) due to a contaminated fuel system; however, the dealer confirmed that the fuel system was not contaminated. The dealer submitted information to the manufacturer advising that the fuel system was not contaminated. Additionally, a case was filed; however, the contact was denied coverage. The failure mileage was approximately 195,000.
- Fuel/propulsion system
Vehicle Safety Complaint – 2021 Ford F-350 I am submitting this complaint regarding a safety-related failure involving my 2021 Ford F-350. While driving under normal conditions, the vehicle suddenly entered “limp mode,” resulting in a significant and immediate loss of power. Approximately 20 miles…
Vehicle Safety Complaint – 2021 Ford F-350 I am submitting this complaint regarding a safety-related failure involving my 2021 Ford F-350. While driving under normal conditions, the vehicle suddenly entered “limp mode,” resulting in a significant and immediate loss of power. Approximately 20 miles later, the vehicle completely shut down, leaving me stranded and requiring the truck to be towed to Gene Messer Ford for diagnosis and repair. The failure created a potentially dangerous situation, as the loss of power limited my ability to maintain safe speeds and respond to surrounding traffic conditions. After the vehicle was delivered to the dealership, it took approximately one week for inspection and an additional two weeks to complete repairs. During the repair process, I was informed that newly installed components—including the fuel rail and two fuel injectors—were defective and required replacement again. This raises concerns about whether the root cause of the failure was properly identified and whether contamination or systemic failure within the fuel system was present. I am also aware of widely reported issues involving high-pressure fuel pump (HPFP) failures in Ford diesel engines, which can result in catastrophic damage to the entire fuel system, including injectors, fuel rails, and lines. Given the nature of my vehicle’s failure and the components involved, I am concerned that this incident may be related to a broader, known defect. This type of failure—sudden loss of power followed by complete shutdown—poses a serious safety risk, particularly if it occurs at highway speeds or in high-traffic conditions. I am requesting that this complaint be reviewed as part of a broader investigation into potential fuel system defects in Ford diesel trucks. I believe this issue may warrant further scrutiny and possible recall action to prevent similar incidents.
- Fuel/propulsion system
Repair remedy has not been addressed. Leaving the vehicle owners footing the bill when a fuel system problem arises. It's been since 2024 and FMC has not done anything about it. Dec 20,2024 Manufacturer Recall Number24S78 NHTSA Recall Number24V957 Recall StatusRecall Incomplete, remedy not yet…
Repair remedy has not been addressed. Leaving the vehicle owners footing the bill when a fuel system problem arises. It's been since 2024 and FMC has not done anything about it. Dec 20,2024 Manufacturer Recall Number24S78 NHTSA Recall Number24V957 Recall StatusRecall Incomplete, remedy not yet available Summary YOUR VEHICLES HIGH-PRESSURE FUEL PUMP MAY FAIL, WHICH MAY RESULT IN EXTENDED CRANKING WITHOUT STARTING WHILE THE VEHICLE IS PARKED, ANDOR A LOSS OF MOTIVE POWER WHILE DRIVING. PRIOR TO LOSS OF MOTIVE POWER YOU MAY EXPERIENCE A CHECK ENGINE LIGHT, NOISE, ANDOR REDUCED ENGINE PERFORMANCE. Safety Risk A LOSS OF MOTIVE POWER INCREASES THE RISK OF A CRASH. Remedy PARTS AND SOFTWARE ARE NOT AVAILABLE TO REPAIR YOUR VEHICLE. FORD MOTOR COMPANY HAS AUTHORIZED YOUR DEALER TO UPDATE THE POWERTRAIN CONTROL MODULE PCM AND THE TRANSMISSION CONTROL MODULE TCM SOFTWARE, AND TO CHECK FOR THE PRESENCE OF CERTAIN DIAGNOSTICS TROUBLE CODES DTCS IN THE PCM WHICH COULD LEAD TO ADDITIONAL DIAGNOSTICS, FREE OF CHARGE. Manufacturer's Notes IF YOU HAVE ANY QUESTIONS REGARDING THIS RECALL, OR BELIEVE ANY OF THIS INFORMATION IS INACCURATE, PLEASE CONTACT FORD DIRECTLY AT 800-392-3673 OR LINCOLN AT 800-521-4140. If the manufacturer has failed or is unable to remedy this safety recall for your vehicle in a timely manner, please contact the NHTSA Vehicle Safety Hotline at: 1-888-327-4236 or TTY: 1-888-275-9171 or file an online complaint with NHTSA.
- Back over prevention
The contact owns a 2021 Ford F-350. The contact stated that the back over prevention camera had been inoperable since purchasing the vehicle. The contact had received notification of NHTSA Campaign Number: 25V048000 (BACK OVER PREVENTION); however, the VIN tool showed no open recall. The local…
The contact owns a 2021 Ford F-350. The contact stated that the back over prevention camera had been inoperable since purchasing the vehicle. The contact had received notification of NHTSA Campaign Number: 25V048000 (BACK OVER PREVENTION); however, the VIN tool showed no open recall. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 110,000.
- Fuel system, diesel
The contact owns a 2021 Ford F-350. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The contact recently set an appointment with a local dealer for the software update, but was informed by the dealer that the recall had been placed on hold. The contact…
The contact owns a 2021 Ford F-350. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The contact recently set an appointment with a local dealer for the software update, but was informed by the dealer that the recall had been placed on hold. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed. The contact had not experienced a failure.
- Fuel system, diesel
The contact owns a 2021 Ford F-350. The contact stated that while driving approximately 65 MPH, the vehicle lost automotive power. The low power mode warning light was illuminated. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do…
The contact owns a 2021 Ford F-350. The contact stated that while driving approximately 65 MPH, the vehicle lost automotive power. The low power mode warning light was illuminated. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The vehicle was taken to a dealer, where it was diagnosed, and determined that a software update was needed; however, the software update was not available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and stated that there was no estimate for when the remedy would be available. The failure mileage was approximately 125,000.
- Back over prevention · Fuel system, gasoline
The contact owns a 2021 Ford F-350. The contact received notifications of NHTSA Campaign Numbers: 25V686000 (Back Over Prevention) and 24V957000 (Fuel System, Diesel); however, the parts to do the recall repairs were not yet available. The contact stated that while driving at an undisclosed speed…
The contact owns a 2021 Ford F-350. The contact received notifications of NHTSA Campaign Numbers: 25V686000 (Back Over Prevention) and 24V957000 (Fuel System, Diesel); however, the parts to do the recall repairs were not yet available. The contact stated that while driving at an undisclosed speed, the vehicle stalled while the accelerator pedal was depressed. Additionally, while in reverse, the image displayed was blurry. The vehicle was towed to a local dealer; however, the vehicle was not repaired because parts were not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 129,000.
- Engine and engine cooling › Exhaust system › Emission control › Urea injection system (def)
The contact owns a 2021 Ford F-350. The contact stated that while operating the vehicle, the check engine warning light remained illuminated. The vehicle was taken to the local dealer who diagnosed that the DEF Pump, DEF Pump Lines needed, and DEF heater element needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 92,567.
- Engine
Cold side intercooler boost tube cracked due to constant vibration impact from coolant overflow hose routed directly above and on top of it. Part and vehicle is available for inspection. The split in the boost hose caused me to loose power while attempting to merge onto a road, almost being hit by…
Cold side intercooler boost tube cracked due to constant vibration impact from coolant overflow hose routed directly above and on top of it. Part and vehicle is available for inspection. The split in the boost hose caused me to loose power while attempting to merge onto a road, almost being hit by another vehicle. After research there are multiple other instances of complaints of the same thing happening to others and multiple aftermarket manufacturers producing replacement and upgraded parts with references and warnings of the same thing happening for the last 10 years. No warning lamps or symptoms prior to failure. After failure no warning lamps but could hear an audible hiss. The vehicle has not yet been inspected by the dealer or police. I was told by their parts people it is a regular failure and the part costs typically around $200 and they only sold it as a full part and not just the rubber replacement hose althought they are separate parts connected with hose clamps.
- Engine · Fuel/propulsion system · Unknown or other
Driving and abrupt transmission shifting issues.
- Fuel system, diesel
The contact owns a 2021 Ford F-350. The contact received a recall letter related to NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The contact was concerned about being involved in a crash. The local dealer was contacted and confirmed that the software fix was not available. The vehicle…
The contact owns a 2021 Ford F-350. The contact received a recall letter related to NHTSA Campaign Number: 24V957000 (Fuel System, Diesel). The contact was concerned about being involved in a crash. The local dealer was contacted and confirmed that the software fix was not available. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The contact did not experience a failure.
- Electrical system
See attached document for complaint.
- Engine · Fuel/propulsion system
On 11/19/25 , my 2021 Ford f350 burned to the ground due to engine malfunction. From what the fire department said.
- Fuel system, diesel
The contact owns a 2021 Ford F-350. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2021 Ford F-350. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed with the cruise control activated, the contact heard an abnormally loud popping and clicking sound. The check engine warning light was illuminated. The message "Decreased Engine Power" was displayed, and the vehicle experienced a loss of drive power. The contact coasted off the road and came to a complete stop. The message "Shift to Neutral" was displayed. The contact turned off the vehicle and let it cool down for five minutes. The vehicle failed to restart. The vehicle was towed to an independent mechanic, who determined that the high-pressure fuel pump had failed. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 132,900.
- Service brakes
The contact owns a 2021 Ford F-350. The contact stated that while driving at speeds above 40 MPH and attempting to depress the brake pedal, the vehicle slid and drifted to the right. There was no warning light illuminated. The vehicle was taken to a local dealer where it was diagnosed, and the…
The contact owns a 2021 Ford F-350. The contact stated that while driving at speeds above 40 MPH and attempting to depress the brake pedal, the vehicle slid and drifted to the right. There was no warning light illuminated. The vehicle was taken to a local dealer where it was diagnosed, and the contact was informed that the grease pins needed to be greased. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 44,000.
- Fuel system, diesel
The contact owns a 2021 Ford F-350. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount…
The contact owns a 2021 Ford F-350. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
- Unknown or other
Back up camera screen goes blue when put in reverse. Then after 20 seconds says camera unavailable see dealer. I had dealer repair with a software reset. Worked for about 2 weeks then same symptoms. Noticed Ford has a recall for the same symptoms on other vehicles but for some reason F-350s are…
Back up camera screen goes blue when put in reverse. Then after 20 seconds says camera unavailable see dealer. I had dealer repair with a software reset. Worked for about 2 weeks then same symptoms. Noticed Ford has a recall for the same symptoms on other vehicles but for some reason F-350s are not a part of it. Would suspect the truck uses the same camera system as the other ford vehilces under the recall. Ford needs to step up and cover the F-350s
- Electrical system
The contact owns a 2021 Ford F-350. The contact stated that while driving 65 MPH, the Disconnect/Reconnect message was displayed on the instrument panel. The contact stated that while depressing the brake pedal with the trailer brake control, the system indicated that there was no trailer detected.…
The contact owns a 2021 Ford F-350. The contact stated that while driving 65 MPH, the Disconnect/Reconnect message was displayed on the instrument panel. The contact stated that while depressing the brake pedal with the trailer brake control, the system indicated that there was no trailer detected. An independent mechanic was contacted. The vehicle was taken to an independent mechanic to be diagnosed; however, the diagnostic result was unknown. The contact stated that the fuses, wiring harness, and trailer brake control were replaced. The contact related the failure to NHTSA Campaign Number: 22V193000 (ELECTRICAL SYSTEM); however, the VIN was not included in the recall. The manufacturer was notified of the issue and informed the contact that a mechanic would be sent to inspect the vehicle. The failure mileage was 200,000.
- Service brakes · Steering
Upon starting the vehicle I get precollision not available warning light and hill decent control fault hill assist warning. Service steering and antilock brake brake fault lights. The dealer has looked at it but they said can not duplicate it. The problem is when I am towing my fifth wheel trailer and this happens it shuts down the brake controller for the fifth wheel and it’s VERY hard to stop the truck and trailer
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Sogefi Secondary Diesel Fuel Filter Leak
The Office of Defect Investigations (ODI) has received 27 complaints alleging diesel fuel leaks due to a fracture in the secondary fuel filter housing in model year (MY) 2015-2021 Ford Motor Company (Ford) F-250, 350, 450, and 550 Super Duty vehicles equipped with 6.7L diesel engines. Of these complaints, 12 describe…
The Office of Defect Investigations (ODI) has received 27 complaints alleging diesel fuel leaks due to a fracture in the secondary fuel filter housing in model year (MY) 2015-2021 Ford Motor Company (Ford) F-250, 350, 450, and 550 Super Duty vehicles equipped with 6.7L diesel engines. Of these complaints, 12 describe an engine compartment fire. The proximity of the secondary fuel filter to high heat sources creates a potential for autoignition thermal events and fires. ODI has contacted the vehicle manufacturer, Ford, and the filter manufacturer, Allevard Sogefi USA (Sogefi), and learned that the low-pressure fuel system is capable of a maximum operating pressure of 8.5 Bar, while the secondary fuel filter is only tested to seven (7) Bar during the manufacturing process. Additionally, changes starting in 2022 by both Ford and Sogefi align with a lack of similar complaints on MY 2022 and newer vehicles. ODI is opening this Preliminary Evaluation (PE) to evaluate the severity of the potential problem and to fully assess the potential safety-related problems. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011941Some 2017-2025 F-Super Duty vehicles may exhibit a pull/drift condition during braking.
- 11011936Some 2020-2021 F-Super Duty vehicles which have received a seat control module-G (SCMG) and/or seat control module-H (SCMH) software update using the Ford Diagnosis and Repair System (FDRS) scan tool may set DTCs U024B and/or U024C in the auxiliary protocol interface module (APIM).
- 11011019In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Routine occurrences of prolonged idle time may result in excess wear to the engine camshaft lobes and valve tappet surfaces due to reduced lubrication. Over time, the engine may progressively run rough due to cylinder misfire. Additionally, customers may hear engine tapping noises and the Check Engine Light (CEL) may illuminate.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11008373In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Reason for supplement: software now available/additonal technician information
- 11007943018-2024 F-150/F-Super Duty - Tailgate Step Binds/Will Not Open Or Opens/Pops Up While Driving
- 11006862Some 2019-2024 Ford and Lincoln vehicles equipped with a telematics control unit module (TCU) may exhibit the Location toggle button in the Connectivity setting menu grayed out with an inability to switch it off.
- 11006767This article supersedes TSB 22-2087 to update the Part List. Some 2020-2022 F-Super Duty vehicles equipped with a 10R140 automatic transmission may exhibit harsh reverse to drive engagements without diagnostic trouble codes (DTCs). This may be due to sticking valves in the main control valve body or suspect input shaft seals (F9) and the output shaft seals (F10). To correct the condition, follow the Service Procedure steps to perform the transmission accelerated main control break-in routine for the E and F clutches and if necessary, replace the input shaft seals (F9) and the output shaft seals (F10).
- 11006036Certain 2018 - 2024 Model Year Various Vehicles Update SYNC Software In all the affected vehicles, due to an error in the SYNC software, you may experience SYNC system instability concerns and/or a failure to preserve certain settings across ignition cycles. This may result in a black infotainment screen that does not affect rear view camera, incorrect language setting, erased or unsaved radio presets, and potential inability to perform software updates.
- 11006033Certain 2020-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine Powertrain Control Module (PCM) Software Update REASON FOR THIS SUPPLEMENT Software Availability Update: Software is now available to repair 2021-2022 and 2025 Model Year Econoline vehicles. The service action has been updated accordingly. Technical Information: IDS programing information has been added for 2021-2023 Model Year Econoline Vehicles.
- 11005994Some 2020-2022 F-Super Duty pickup vehicles equipped with a 6.7L engine, 175 inch wheelbase, and built on or before 23-Sep-2021 may exhibit a thump/whine/knock noise from the midship fuel tank at idle or during key on, engine off (KOEO) after performing TSB 21-2057. The noise may be more pronounced at fuel levels at or below 1/4 tank. This may be due to the fuel pump
- 11005746Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various FordPass/LincolnWay connectivity concerns including but not limited to: missing activation prompt (pop-up) on the vehicle's center display screen when attempting to activate vehicle through FordPass/LincolnWay, incorrect location/global positioning system (GPS) reported through FordPass/LincolnWay, problems with remote commands being performed through FordPass/LincolnWay, incorrect data/information reported on FordPass/LincolnWay. These symptoms will be accompanied by diagnostic trouble code (DTC) B156D:89 in the TCU. This may be due the accessory protocol interface module (APIM) software
- 11005710Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System (FDRS) or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level NU5T-14G381-AB/BB. The current software level can be verified in the SYNC tab of Professional Technician System (PTS) or using the vehicle's center display screen, Settings > General > About. To correct the condition, run the universal USB updater. If unsuccessful, using the latest software version of the FDRS scan tool, run the service function "APIM - Reset the Accessory Protocol Interface Module Application" and select "Clear All User Data" option. The center display screen will reboot. As soon as the vehicle's center display screen displays the boot up logo, immediately reinsert the same universal serial bus (USB) drive that was utilized during the prior failed programming attempt.
- 11003146Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System, or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level
- 11002845Certain 2020-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine Powertrain Control Module (PCM) Software Update In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Routine occurrences of prolonged idle time may result in excess wear to the engine camshaft lobes and valve tappet surfaces due to reduced lubrication. Over time, the engine may progressively run rough due to cylinder misfire. Additionally, customers may hear engine tapping noises and the Check Engine Light (CEL) may illuminate
- 11001646This article supersedes TSB 23-2307 to update the Service Procedure and vehicle model years affected. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Transit Connect, 2019-2023 Mustang, 2019-2023 Ranger, 2020-2021 Expedition/Navigator, 2020-2022 Escape/Corsair/Super Duty/EcoSport, 2020-2024 Explorer/Aviator/Transit, 2021-2024 Bronco Sport, 2022-2024 Maverick vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update theaccesory protocol interface module (APIM) software.
- 11001368When replacing the E clutch hub (7P211) on 2020-2024 F-Super Duty and 2024-2025 F-650/F-750 vehicles equipped with a 10R140 transmission, a new washer (7482) has been added and must be installed with the new updated E clutch hub. Refer to the Workshop Manual (WSM), Section 307-01B for proper installation of the washer. Refer to the parts catalog for the appropriate part numbers for the E clutch hub and the washer.
- 11000738Some 2020-2022 F-Super Duty vehicles built on or before 31-Oct-2022 and equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2201, P2209, P220E and/or P24FE stored in the powertrain control module (PCM). This may be due to the software in the PCM and the nitrogen oxides (NOx) sensor 11. To correct the condition, follow the Service Procedure to replace the NOx sensor 11 and reprogram the PCM and transmission control module (TCM).
- 11000297Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10253552Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10250852Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 102491752024 F-Super Duty vehicles are equipped with XL-22 (WSS-M2C184-A1) high temperature power steering fluid that looks like clear hydraulic fluid. This fluid is an improvement in high temperature and thermal oxidative stability compared to Mercon LV. This power steering fluid is also compatible and highly recommended to use when filling or topping off power steering systems of all 2012-2023 F-Super Duty vehicles originally equipped with Mercon LV.
- 10245672Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may require a long block replacement of the engine for various reasons. The replacement long block may be equipped with an updated upper oil pan. If the oil filter adapter from the original engine does not mate with the new upper oil pan, service parts PC3Z-6881-A (oil filter adapter), W503277-S439 (package of 6 bolts, 4 bolts required), W718564-S450 (stud), W520101-S442 (nut), and PC3Z-14A206-A (starter cable retaining bracket) will be needed to complete the repair.
- 10244822When replacing the transmission case on a 2020-2022 F-Super Duty equipped with a 10R140 transmission, the new service case may not come equipped with the transmission fluid leveling plug. To achieve proper transmission fluid level, a new transmission fluid pan and gasket must be installed (service part PC3Z-7A194-A). Refer to the 2023 F-Super Duty Workshop Manual, Section 307-01B to properly set the transmission fluid level when using the newer transmission fluid pan.
- 10244707Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
- 10243609Some vehicles equipped with power folding mirrors may exhibit power folding mirrors that are inoperative or exhibit a clicking sound. This may be due to the mirrors being manually folded in, during transportation, going through a car wash, bumped in a parking lot, or found during pre-delivery inspection (PDI). Prior to the replacement of any components, attempt to synchronize the mirrors by following the Power Mirrors Synchronization procedure. Refer to Workshop Manual (WSM) Section 501-09 Rear View Mirrors - General Procedures - Power Mirrors Synchronization.
- 10241949Certain 2021-2022 Model Year Econoline, Super Duty Chassis Cab, F53 Motor Home, F59 Step Van, and F650/F750 Medium Duty Chassis Cab Vehicles Equipped with a Premium Rated 7.3L Engine - Engine Horsepower Credit
- 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10240719Some F-Super Duty and F-150 vehicles equipped with trailer tow mirror may exhibit various exterior rear view mirror functional concerns that require replacement after diagnosis. To properly determine if the defect is warrantable, cleaning and close inspection of the affected mirror may be required. To aid in proper warranty determination, the Rear-View Mirror Analysis general service bulletin (GSB) has been updated with a detailed cleaning procedure that should be followed prior to any inspection. New labor operations (17682ZZ or 17682ZZT) have been created that covers the cleaning and inspection process and may be used even if condition of failure is non-warrantable. Ford has inspected numerous returned parts and determined many cases are caused by damage which is unwarrantable and may be subject to chargeback. Refer to the latest version of the GSB on OASIS.
- 10237977Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10237971Some 2021-2023 F-Super Duty/E-Series vehicles equipped with a 6.2L, 6.8L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 and/or P0455 stored in the powertrain control module (PCM). This may be due to a improper fuel filler cap installation and/or outside contamination on the fuel cap sealing surface. The fuel filler cap requires multiple turns to seal properly and should be clean of any debris on sealing surface. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. If the DTCs return after the fuel filler cap is cleared of debris and properly seated, refer to Workshop Manual (WSM), Section 303-13 > pinpoint test HX.
- 102377892011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26C (80F) and may increase to 1200 RPM at -40 C (-40F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
- 10236685Some 2018-2021 F-150 vehicles equipped with a 3.0L diesel engine, 2016-2022 F-650/F-750 vehicles equipped with a 6.7L engine, and 2017-2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 08-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P21DD, P20BA. P20B9, P204C, P208A, P208B, P208C, P203B, P205B, P21CD and/or U02A2 in the powertrain control module (PCM). This may be due to water intrusion within connectors C3613 and/or C4851/C3610 on the reductant harness going to the reductant pump/heater assembly and the reductant level sensor/quality module. This may also be due to movement of the wiring harness causing terminal fretting. To correct the condition, follow the Service Procedure to replace the reductant tank harness, the reductant pump/heater assembly and/or the reductant tank, as well as securing the wiring harness using a cable zip tie fastener.
- 10236586Some 2021-2023 F-Super Duty vehicles equipped with a 10R140 transmission may exhibit harsh or delayed engagement/shift concerns. Most concerns may be addressed with the PCM/TCM Transmission Accelerated Main Control Break In Routine. Refer to Workshop Manual, Section 307-01, DTC Chart and/or Diagnosis By Symptom to identify the clutch(s) to be cycled. This routine cycles the shift solenoids and clutch control valves to remove contamination that may be sticking the valves and must be performed along with an adaptive learning drive cycle before attempting internal service. Although this routine was developed for low mileage vehicles, it has proven effective for resolving many shift and engagement symptoms across the life of the vehicle. For claiming, use causal part 7A100 and applicable labor operations in Section 7 of the Service Labor Time Standards Manual.
- 10236585Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may experience a lack of power due to snow packing of the engine air cleaner when operating in extremely snowy conditions. This may also be due to ice forming in the air intake while operating in temperatures below -22F (-30C). Diagnostic trouble code (DTC) P1548 may be present in the powertrain control module (PCM). To supplement heavy snow environment pre-filter service kit (service part LC3Z-9K635-AA), a front grill cover (service part NC3Z-19A413-A) is now available for service but is not a warrantable item. It is recommended that the front grill cover be removed at temperatures greater than 10F (-12C) and reinstall in subsequent winter seasons in order to maintain optimal vehicle performance.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
Every Ford F-350 SD model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.