2017 Ford Mustang

Recalls

6 recalls name the 2017 Ford Mustang. Newest first.

• Seat belts › Pretensioner

  Sep 12, 2025NHTSA 25V614000332,778 vehicles

  Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. Water and road salt may corrode the front seat belt anchor pretensioner cables.

  Risk and remedy

  Risk

  A corroded cable can break, preventing the seat belt from properly restraining an occupant, and increasing the risk of injury during a crash.

  Remedy

  Dealers will inspect and replace both front seat belt anchor pretensioner assemblies, as necessary. In addition, dealers will remove sections of the carpet and underlayment that contact the cables. Dealers will also inspect the A-pillar sealing patches, and as necessary, install A-pillar body plugs, and/or inspect and replace the front outboard seat bolts. Repairs will be performed free of charge. Interim letters, notifying owners of the safety risk, were mailed October 20, 2025. Additional letters will be sent once the final remedy is available, anticipated December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S92. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov September 17, 2025.

  Full recall details →

• Back over prevention › Sensing system › Camera

  Sep 3, 2025NHTSA 25V5720001,456,417 vehicles

  Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.

  Risk and remedy

  Risk

  A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

  Remedy

  Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.

  Full recall details →

• Back over prevention › Sensing system › Camera

  Feb 16, 2022NHTSA 22V082000330,784 vehicles

  Ford Motor Company (Ford) is recalling certain 2015-2017 Mustang vehicles. The rearview camera wiring may be loose or damaged, which can result in a blank or distorted image.

  Risk and remedy

  Risk

  A rearview camera that displays a blank or distorted image can reduce the driver's rear view, increasing the risk of a crash.

  Remedy

  Dealers will inspect and repair the decklid wiring harness and/or replace the rearview camera, as necessary, free of charge. Owner notification letters were mailed December 23, 2022 and June 26, 2023. Remedy parts are expected to become available in the 4th Quarter of 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S06.

  Full recall details →

• Air bags › Frontal › Passenger side › Inflator module

  Aug 28, 2017NHTSA 17V529000650 vehicles

  Ford Motor Company (Ford) is recalling certain 2017 F-150 and Mustang vehicles. The air bag inflator within the passenger frontal air bag module may rupture in the event of a crash.

  Risk and remedy

  Risk

  An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

  Remedy

  Ford will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began October 11, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S26.

  Full recall details →

• Latches/locks/linkages › Doors › Latch

  Mar 13, 2017NHTSA 17V1680005,470 vehicles

  Ford Motor Company (Ford) is recalling certain 2017 Ford Mustang vehicles. The return spring for the driver side interior door handle may come loose, allowing the driver's door to unlatch in a side impact crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door…

  Risk and remedy

  Risk

  If the door unlatches in a crash it can increase the risk of injury.

  Remedy

  Ford will notify owners, and dealers will inspect the driver-side interior door handle and repair the return spring, as necessary, free of charge. The recall began April 14, 2017. Owners may contact Ford at 1-866-436-7332. Ford's number for the recall is 17C04.

  Full recall details →

• Engine and engine cooling › Cooling system › Hoses/lines/piping/fittings

  Oct 26, 2016NHTSA 16V7790006,582 vehicles

  Ford Motor Company (Ford) is recalling certain model year 2015-2017 Mustang vehicles manufactured February 24, 2015, to August 30, 2016. A hose may separate from the engine oil cooler tube assembly causing an oil leak.

  Risk and remedy

  Risk

  A sudden loss of engine oil may cause engine failure, increasing the risk of a crash. Additionally, an oil leak, in the presence of an ignition source, increases the risk of a fire.

  Remedy

  Ford will notify owners, and dealers will replace the engine oil cooler tube assembly, free of charge. The recall began on March 23, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S40.

  Full recall details →

Owner complaints

What owners report most

1. Back over prevention67
2. Structure41
3. Unknown or other37
4. Electrical system34
5. Latches/locks/linkages29
6. Engine27
7. Power train22
8. Seat belts16
9. Steering11
10. Air bags10

Latest complaints

• Oct 19, 2026FL
  Structure › Body
  My 2017 Ford Mustang Convertible front door unlatched to the secondary safety position while driving at highway speeds. This became a huge issue on October 13, 2026 while taking a long-distance trip. The passenger door unlatched at least 10 times. During this trip, my car exceded the 150,000 mile…

  My 2017 Ford Mustang Convertible front door unlatched to the secondary safety position while driving at highway speeds. This became a huge issue on October 13, 2026 while taking a long-distance trip. The passenger door unlatched at least 10 times. During this trip, my car exceded the 150,000 mile limit to Ford customer satisfication program 21N10. When I contacted both my local dealer and the Ford customer service team, both said their is nothing they can do to help me. I am quite frustrated that Ford rejected my safety concerns on this known issue and was unwilling to recognize the extunuating circumstances of when this happened.

• Oct 13, 2026TX
  Engine · Unknown or other
  I have attached a complaint which sets for the odometer fraud resulting in severe damage to my engine. I have also attached mileage discrepancies and the documentation created and maintained by AutoNation Ford Valencia which records my odometer at 26,250 in September 2022 and after taking my…

  I have attached a complaint which sets for the odometer fraud resulting in severe damage to my engine. I have also attached mileage discrepancies and the documentation created and maintained by AutoNation Ford Valencia which records my odometer at 26,250 in September 2022 and after taking my vehicle in for service of the air condition, I received it back with an odometer reading of 25,134 which appear on the odometer. Please review my complaint and supporting documentation.

• Oct 7, 2026FL
  Structure › Body
  I have experienced a concerning issue twice while driving. On both occasions, I was traveling at approximately 72 mph with all doors closed and locked when the vehicle indicated that the passenger door was ajar. Although the door did not fully open, it appears that the latch may not have remained…

  I have experienced a concerning issue twice while driving. On both occasions, I was traveling at approximately 72 mph with all doors closed and locked when the vehicle indicated that the passenger door was ajar. Although the door did not fully open, it appears that the latch may not have remained securely engaged. My concern is that if I have a passenger in the vehicle and this occurs again, it could create a serious safety risk. I would like to know what may be causing this issue and what can be done to correct it. Could this be related to a defective door latch, sensor, or another component?

• Aug 31, 2026TX100,000 mi
  Back over prevention
  The contact owns a 2017 Ford Mustang. The contact stated that while reversing, the third brake light failed to function as intended. In addition, the rear-view camera flashed on and off. The contact replaced the third brake light housing, but the failure reoccurred. The contact purchased and…

  The contact owns a 2017 Ford Mustang. The contact stated that while reversing, the third brake light failed to function as intended. In addition, the rear-view camera flashed on and off. The contact replaced the third brake light housing, but the failure reoccurred. The contact purchased and replaced the third brake light three times; however, the failure reoccurred. The dealer was made aware of the failure, and the failure reoccurred. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact received notification of NHTSA Campaign Number: 22V082000 (Back Over Prevention). The manufacturer was not made aware of the failure. The failure mileage was approximately 100,000.

• Jul 24, 2026UTFire
  Electrical system · Seats

  Was driving, all the sudden I heard a pop and a little bit of smoke and the smell of burning plastic came from under passenger seat. Pulled over, noticed it was coming from electrical harness under seat that controls the heated and cooled seats. Disconnected plug and saw that it had burnt out & caught fire. Have left it unplugged with no incident since.

• Jul 22, 2026KS120,000 miFire
  Electrical system › Wiring › Rear compartment/trunk
  The contact owns a 2017 Ford Mustang. The contact stated that while driving at an undisclosed speed, the contact noticed smoke on the interior of the vehicle. The contact stated that the smoke became heavy on the interior of the vehicle. The contact stopped the vehicle and became aware that the…

  The contact owns a 2017 Ford Mustang. The contact stated that while driving at an undisclosed speed, the contact noticed smoke on the interior of the vehicle. The contact stated that the smoke became heavy on the interior of the vehicle. The contact stopped the vehicle and became aware that the heavy smoke was coming from the trunk of the vehicle. The Fire Department arrived on the scene and extinguished the fire. No injuries were sustained. The vehicle was towed to a local tow yard. The vehicle was not inspected. A Police report was filed. The manufacturer was not made aware of the failure. The failure mileage was approximately 120,000.

• Jul 15, 2026CA
  Electrical system
  Horn when first pushed does not work....Push it 3-4 times rapidly and it works fine...Intermittent....Yesterday a kid not paying attn pulled out in front of me on a bicycle....I hit the horn, horn did not work, came sooooo close to hitting him......With a horn operating properly it would not have…

  Horn when first pushed does not work....Push it 3-4 times rapidly and it works fine...Intermittent....Yesterday a kid not paying attn pulled out in front of me on a bicycle....I hit the horn, horn did not work, came sooooo close to hitting him......With a horn operating properly it would not have been as nearly deadly as it was......Took it to my dealer, was told it is a common known problem, about $1000.00 to troubleshoot and fix....This is a extremely dangerous defect, known to everyone and should be a recall.....The expense to fix is ridiculous to the point that very few are getting it fixed and it is a continuing deadly issue.....

• Jul 10, 2026FL
  Structure › Body
  Our 2017 has had an ongoing problem through the years with the passenger door opening at speed. Sometimes going 70 mph on the interstate. Lately it has happened more and more. Yesterday, my wife called me at work, very upset saying that the passenger door popped open again on her way to work. I…

  Our 2017 has had an ongoing problem through the years with the passenger door opening at speed. Sometimes going 70 mph on the interstate. Lately it has happened more and more. Yesterday, my wife called me at work, very upset saying that the passenger door popped open again on her way to work. I have read that Ford has had some issues with driver side doors opening, but have not seen a recall for the passenger side. This is very dangerous and scares my wife. Ford seems to be very slow with giving attention to safety issues. Last year, our rearview camera on the same car was supposed to have been repaired. They did part of the job but said they are waiting on a part. That was October of 2025. I have heard nothing back. I have contacted the dealership, who tells me they will get back with me, but they basically have not. Meanwhile, I still have a nonworking backup camera. I know they are bogged down with recalls, but these are ongoing, very serious safety issues.

• Jun 25, 2026FL27,000 mi
  Seat belts
  The contact owns a 2017 Ford Mustang. The contact stated that the driver's and passenger's side seat belts were seizing. The occupants were concerned about being stuck inside the vehicle. There were no warning lights illuminated. The mechanic removed the inside panels of the seat belts and greased…

  The contact owns a 2017 Ford Mustang. The contact stated that the driver's and passenger's side seat belts were seizing. The occupants were concerned about being stuck inside the vehicle. There were no warning lights illuminated. The mechanic removed the inside panels of the seat belts and greased and cleaned the parts. The contact stated that the failure was associated with NHTSA Campaign Number: 25V614000 (Seat Belts). The vehicle was taken to the local dealer, where an inspection was performed, and it was confirmed that the seat belts were working as designed. The vehicle was not repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 27,000.

• Jun 22, 2026CA
  Structure › Body
  This is a Mustang convertible. The doors would be open all of the sudden when the car is running especially on highway. It's not wide open but ajar. The wind would blow into the car, noisy and scary. Both doors have this issue, mainly on driver side. The passenger side also happened once on highway…

  This is a Mustang convertible. The doors would be open all of the sudden when the car is running especially on highway. It's not wide open but ajar. The wind would blow into the car, noisy and scary. Both doors have this issue, mainly on driver side. The passenger side also happened once on highway when my daughter was there. This typically happen in a long drive like couple of hours. The first time this happened is couple of years ago. This issue happened more and more often in the past year. I found online that this issue was reported and some of the cars were recalled. However, my car is not one of those that were recalled. I believe this is a big deal and should be taken care of seriously. Thank you.

• Jun 18, 2026NC
  Structure › Body
  While driving my recently purchased 2017 Ford Mustang Convertible from Florida to North Carolina, the passenger-side door repeatedly unlocked and partially opened while the vehicle was traveling at interstate speeds. This occurred approximately 12 times during the trip. The door appeared to latch…

  While driving my recently purchased 2017 Ford Mustang Convertible from Florida to North Carolina, the passenger-side door repeatedly unlocked and partially opened while the vehicle was traveling at interstate speeds. This occurred approximately 12 times during the trip. The door appeared to latch normally when closed, but would unexpectedly unlock and pop open while the vehicle was in motion. This created a significant safety concern due to the risk of occupant injury, driver distraction, and potential loss of vehicle control. I am aware that Ford has issued recalls related to door latch failures on certain Mustang models; however, my vehicle's VIN is not included in the recall population. Based on my research, numerous owners of Ford Mustang Convertibles from model years around 2017 have reported experiencing similar door latch and door-opening issues. Given the frequency of the occurrences and the obvious safety implications of a vehicle door opening while traveling at highway speeds, I believe this issue warrants further investigation.

• Jun 15, 2026DE
  Seat belts
  Recall performed and tech stated parts were bad and needed desperately and parts were ordered. I have a repair invoice to prove it in my vehicle history. I rescheduled appointment for recall completion and service manager was very rude and stated recall doesn’t even have parts out until 11/2026.…

  Recall performed and tech stated parts were bad and needed desperately and parts were ordered. I have a repair invoice to prove it in my vehicle history. I rescheduled appointment for recall completion and service manager was very rude and stated recall doesn’t even have parts out until 11/2026. When I questioned if recall was performed improperly per TSB she placed me on hold for a while and she said parts department doesn’t have parts for me /never ordered anything and I can’t get the recall done.

• Jun 12, 2026OK175,000 mi
  Back over prevention · Seat belts
  The contact owns a 2017 Ford Mustang. The contact stated that the seat belts failed to lock or latch securely into the buckles. Additionally, the contact stated that the rearview camera failed to operate as intended. The contact received a safety recall notification for NHTSA Campaign Number…

  The contact owns a 2017 Ford Mustang. The contact stated that the seat belts failed to lock or latch securely into the buckles. Additionally, the contact stated that the rearview camera failed to operate as intended. The contact received a safety recall notification for NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was notified of the failures but declined to assist with the repairs. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 175,000.

• May 26, 2026PA50,000 mi
  Engine
  The contact owns a 2017 Ford Mustang. The vehicle was taken to the local dealer for a routine timing cover replacement. The contact believed the engine was damaged while being serviced. Upon retrieval, the check engine light was illuminated. There was an abnormal ticking noise detected. The vehicle…

  The contact owns a 2017 Ford Mustang. The vehicle was taken to the local dealer for a routine timing cover replacement. The contact believed the engine was damaged while being serviced. Upon retrieval, the check engine light was illuminated. There was an abnormal ticking noise detected. The vehicle had misfired. The vehicle had not been diagnosed or repaired. The manufacturer was not notified. The failure mileage was approximately 50,000.

• May 14, 2026CA
  Engine

  Head gasket failure, specifically corrosion of the engine block. One day the car just did not start at all, with no clear indication of head gasket failure until compression test was ran. Symptoms include coolant levels getting lower each week, with constant refills needed. Random misfires. Smoke randomly emitting from the exhaust when idle. Has not been inspected by the manufacturer, police or insurance.

• May 13, 2026TX
  Unknown or other

  Driver and passenger door will randomly unlatch while driving. The door will become ajar while on the highway.

• May 7, 2026FL
  Back over prevention › Rearview system braking · Back over prevention › Warnings · Electrical system

  Recall 22V0820000, Ford recall 22S06 was completed in 2023. That recall failed. The dealership, and Ford corporate have refused to fix this under the recall which is required.

• Apr 29, 2026TN
  Seat belts

  This Recall has been out for more than 6 months without remedy. Is there anyway to get this resolved soon? Why hasn't there been any solution placed within a timely matter? I want to make sure that I am safely secured in my seat. I want to be able to trust that the seatbelt used will save my life if need be.

• Mar 26, 2026CA
  Unknown or other
  "I am reporting High Desert Ford (formerly Sunland Ford) for refusing to perform the remedy for Safety Recall 25S89 (NHTSA 25V572) on my 2017 Ford Mustang. Despite my vehicle exhibiting the exact 'distorted/blank image' defect described in the recall, the dealership refused the repair based on two…

  "I am reporting High Desert Ford (formerly Sunland Ford) for refusing to perform the remedy for Safety Recall 25S89 (NHTSA 25V572) on my 2017 Ford Mustang. Despite my vehicle exhibiting the exact 'distorted/blank image' defect described in the recall, the dealership refused the repair based on two non-compliant grounds: 1. Digital vs. Physical Defect: The dealer stated that because no 'Diagnostic Trouble Codes' (DTCs) were present, they would not replace the camera. This ignores the fact that NHTSA 25V572 identifies the root cause as internal PCB corrosion—a physical hardware failure that Ford acknowledges causes visual distortion regardless of digital codes. 2. Illegal Tie-In (Magnuson-Moss Violation): The dealership is conditioning my federal safety remedy on the removal of an aftermarket dash display. They claim diagnosis is 'impossible' with it installed, yet simultaneously claimed the vehicle 'passed' inspection. This constitutes an illegal tie-in provision under 15 U.S.C. § 2302(c), as they have failed to provide any technical proof that the display caused the internal camera corrosion identified by Ford. I have video evidence of the safety failure which the dealership refused to review. By denying this repair, High Desert Ford is knowingly leaving a vehicle on the road with a defect that increases the risk of a crash."

• Feb 24, 2026FL
  Seat belts

  Recall remedy unavailable for 8+ months causing financial loss

• Feb 2, 2026FL57,000 mi
  Back over prevention
  The contact owns a 2017 Ford Mustang. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was taken to the dealer and the vehicle was repaired under NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the contact was informed that the…

  The contact owns a 2017 Ford Mustang. The contact stated that while reversing, the rear-view camera displayed a distorted image. The vehicle was taken to the dealer and the vehicle was repaired under NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the contact was informed that the wiring harness also needed to be replaced, but was not covered under the recall. The contact stated that after the recall repair was performed, the rear-view camera became inoperable, and the message "Camera Not Available" was displayed while reversing. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 57,000.

• Jan 16, 2026GA71,000 mi
  Back over prevention
  The contact owns a 2017 Ford Mustang. The contact stated that there were intermittent failures with the rear-view camera image. The contact had opened the trunk and noticed that the mesh covering the electrical wires was deteriorating. There was tape holding the mesh to the wires. The tape was…

  The contact owns a 2017 Ford Mustang. The contact stated that there were intermittent failures with the rear-view camera image. The contact had opened the trunk and noticed that the mesh covering the electrical wires was deteriorating. There was tape holding the mesh to the wires. The tape was rewrapped, and the camera became functional. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention). The contact stated that approximately one month after receiving the recall notification, the rear-view camera failed again. The vehicle was taken to a local dealer, who advised the contact that the camera was inspected, and no failure was found. The vehicle was retrieved, but the camera image was distorted, and eventually, there was no image displayed. There was a message that the camera needed to be serviced. The vehicle was returned to the same dealer, who determined that the failure was not due to the camera and that additional diagnostic tests were needed. The contact was informed that the recall repair had been completed and that the repair would be at the owner's expense. The vehicle was not repaired. The manufacturer was informed of the failure and referred the contact to another dealer for assistance. The failure mileage was approximately 71,000.

• Jan 14, 2026SC
  Seat belts
  The contact owns a 2017 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V614000 (Seat Belts); however, the part to do the recall repair was not yet available. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The dealer confirmed that parts…

  The contact owns a 2017 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V614000 (Seat Belts); however, the part to do the recall repair was not yet available. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure.

• Jan 13, 2026CA
  Seat belts
  The contact owns a 2017 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V614000 (Seat Belts). The contact called the dealer several times for status updates on when parts would be available for the recall repair and was informed that the manufacturer would notify owners…

  The contact owns a 2017 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V614000 (Seat Belts). The contact called the dealer several times for status updates on when parts would be available for the recall repair and was informed that the manufacturer would notify owners with another letter when parts became available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the issue. The contact had not experienced a failure.

• Nov 22, 2025LA
  Seat belts · Unknown or other
  While backing up my rear view camera finally went completely out. I have 3 recalls and it's been way over a year or better all I keep getting is notices that they don't have my parts. Over a year really. Can you help me get my car fixed? I have 4 small grandchildren age 1-9 which 2 of them I pick…

  While backing up my rear view camera finally went completely out. I have 3 recalls and it's been way over a year or better all I keep getting is notices that they don't have my parts. Over a year really. Can you help me get my car fixed? I have 4 small grandchildren age 1-9 which 2 of them I pick up daily. I want to make sure I do everything I can to keep them safe. If I was a year late on my car payment they would not wait. I think I have been more than patient.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Desiccated Air Bag Inflator Rupture

  EA21002Opened Sep 17, 2021Open
  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11009917This is a proactive investigation program by Ford Motor Company to obtain field parts for evaluation. Ford is voluntarily conducting this program to evaluate the field performance and functionality of the obtained front seat belt retractor assemblies. Parts obtained from the program must be returned to Ford for evaluation.
• 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
• 11001174This article supersedes TSB 21-2175 to update the TSB Service Procedure. Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. related concerns including but not limited to: Display operation concerns Navigation inoperative Voice recognition concerns Phone connection issues Dropped phone connections Applink related performance Travel Link not present or showing incorrect traffic Slow system response This may be due to the SYNC software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software. NOTE: Ford has found some of the APIMs replaced and returned for inspection contained an outdated software level and the APIM did not require replacement. The customer concern may have been resolved by updating the APIM with latest level of software.
• 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
• 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
• 10251951Some 2011-2024 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a tick tap and/or typewriter ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150F (65C) or higher and engine speed is at idle up to approximately 1700 RPM. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise tick rate can be faster or slower and is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted. This information along with an example audio clip has been added to the WSM Section 303-00 Engine System  General Information > Diagnosis and Testing > Engine > PPT F > Step F2.
• 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
• 10248371Some 2015-2020 Mustang vehicles built on or before 30-Aug-2020 may exhibit a rattle like noise coming from the front seat. This may be due to the mating surface between the seat frame and floor pans. To correct this condition, follow the Service Procedure to clean the mating surface.
• 10246072Certain 2015 2021 Model Year Mustang Convertible Vehicles - Door Opens to Secondary Latch Position
• 10243652Some 2015-2019 F-Super Duty and 2015-2020 F-150/Mustang vehicles may require replacement of the powertrain control module (PCM) for various reasons. While performing a programmable module installation (PMI) using the Integrated Diagnostic Service (IDS) scan tool, an error message may state: Configuration Failed, Would You Like To Retry? This may be due to improper module replacement steps. Make sure that the original module is installed in the vehicle, delete the vehicle session, then start a new vehicle session. Once the session starts, run the PCM PMI and install the new PCM only when the scan tool instructs. Finish the PMI by following the prompts given by IDS. If the original PCM is not available, it is possible to configure the module by running as-built programming on the PCM. When IDS asks to obtain part numbers or configuration data, select configuration data.
• 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
• 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
• 10240305Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471
• 10240266SPL Parts, Inc. manufacturers and distributes aftermarket lower control arms for dedicated competition vehicles and "track day" cars some of which may be used on both track and highway. SB 23-01 adresses proper installation torque of cap bolt fasteners attaching SPL's aftermarket lower control arms, recurring inspection and confirmation of torque setting and removal and replacement of damaged or under torqued fasteners to reduce risk of premature failure and accident. SB-23-01 was mailed, emailed and posted on SPL website to known resellers, race teams and users of the affected parts and is being submitted here as required by part 579.5. Vehicle Applications include: BMW series 1,2,3,& 4, 2008-2023; Chevrolet Camaro 26-2023, Cadillac ATS, CTS 2016-2019; Ford Mustang 2015-2023; Toyota Supra 2020-2023.
• 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
• 10230933During replacement of the electronic power assist system (EPAS) steering gear assembly on 2015-2023 Mustang vehicles, removal and replacement of the inner tie rods and bellows boots is required. To assist engineering with root cause analysis of failed steering gears, include these parts in the same package when returning warranty replacement steering gears. Make sure to avoid damage to the bellows boots or inner tie rods during removal. The steering gear should also be packaged in the original box with all protective insulators in place to properly protect it during shipping.
• 10228876Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
• 10222788Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
• 10222460Certain 2015 2021 Model Year Mustang Convertible Vehicles Door Opens to Secondary Latch Position Submitting Owner Letter
• 10217028Some 2017-2022 Ford/Lincoln customers may experience a notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
• 10214761Some 2015-2022 Mustang vehicles may exhibit a water leak onto the front carpet that originates from the either the left or right A-pillar. This may be due to a detached A-pillar body seal. Follow the service procedure to repair the vehicle.
• 10212957Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
• 10210941In various 2017-2022 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating "Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Please refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option
• 10210472Some 2015-2020 Mustang Shelby GT350/GT350R vehicles may exhibit a hesitation or surge in the vehicle with no diagnostic trouble codes (DTCs) present. This may be accompanied by an inoperative cruise control system. This may be due to a transmission output shaft flange nut that has come loose, allowing the output shaft tone ring to move in relation to the output shaft causing an erroneous signal. To resolve the condition, follow the Service Procedure steps to replace the output shaft flange nut.
• 10209209This article supersedes TSB 21-2236 to update the models and year affected. Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2022 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2022 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2022 F-Super Duty, 2018-2022 EcoSport/Expedition, 2019-2022 Ranger/Nautilus, 2021-2022 Bronco/Bronco Sport/Mustang Mach-E, 2022 Maverick vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
• 10208146Some 2017-2018 Focus/MKX/C-MAX, 2017-2019 MKC/Taurus/Flex/MKT, 2017-2020 Fusion/MKZ/Continental, 2017-2022 Mustang/Edge/Explorer/Police Interceptor Utility/Escape/F-150/F-Super Duty, 2018-2022 Expedition/Navigator, 2019-2022 Ranger/Nautilus, 2020-2022 Corsair/Aviator, and 2021-2022 Mustang Mach-E vehicles may exhibit a noisy, incorrectly operating, and/or inoperative seat motor. This may be due to a damaged or inoperative seat track motor. A lower level service part has been released to correct noisy, incorrect operation/inoperative seat track motors.
• 10205726Certain 2015 2021 Model Year Mustang Convertible Vehicles Door Opens to Secondary Latch Position n some of the affected vehicles, a front door latch may open to the secondary latched position while driving. While the door is in the secondary latched position the driver will notice wind noise from the door and a door ajar warning will appear on the instrument cluster. This concern does not result in a fully opened door while driving. The occupant can open the door normally using the door handle.
• 10205694Some 2016-2021 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit a condition where the navigation voice prompts are inoperative after a SYNC map update. This may be due to an incomplete installation of the SYNC map software. If possible, using the original USB that installed the update, reperform the update and verify the navigation voice prompts have returned. Multiple reboots are expected when this update is being performed. Verify the Installation Is Complete message displays in the touch screen. If the original USB is not available, go to website https://syncnavigation.com/ford/home or https://syncnavigation.com/lincoln/home to download the files once more for the affected vehicle. For further map update support, reference the FAQ section on these websites.
• 10201050Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
• 10201034Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
• 10201019Some 2017-2021 Ford and Lincoln vehicle customers may receive a message in their FordPass or Lincoln Way App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the SYNC Connect or FordPass Connect feature or Lincoln Connect or Embedded Modem Do not replace the TCU or perform any repair to resolve this condition. Refer the owner of the vehicle to Ford Pass Guides or Lincoln Way Concierge Teams to assist in removing the fleet telematics subscription.
• 10201013Some 2016-2021 Ford or Lincoln vehicles equipped with SYNC 3 or SYNC 4 may exhibit a blank screen or other various SYNC symptoms only when the vehicle is in transport mode. This is considered normal due to the power saving features enabled while in transport mode. It is beneficial for battery life to keep the vehicle in transport mode until the vehicle is prepped for sale. To prevent a SYNC system lockup during transport mode deactivation, follow the Workshop Manual (WSM) procedure exactly allowing time for the SYNC system to complete its tasks such as fully booting up or powering down and shutting off before moving to the next step of the procedure. If the vehicle exhibits a blank screen or SYNC symptoms after transport mode deactivation, refer to WSM, Section 415-00 for normal diagnosis. The SYNC version can be confirmed via OASIS.
• 10199536Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2021 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2021 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2021 F-Super Duty, 2018-2021 EcoSport/Expedition, 2019-2021 Ranger/Nautilus, 2021 Bronco Sport/Mustang Mach-E vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
• 10198605Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F-150/Focus/C-MAX/Edge/Fiesta/MKX/Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns.
• 10194428Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
• 10191525Some 2011-2021 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150F (65C) or higher and engine speed is at idle up to approximately 1700 RPMs. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted.
• 10183567For 2011-2020 F-150/Mustang vehicles equipped with a 5.0L engine when installing a replacement secondary timing chain tensioner (6K254) or secondary timing chain guide (6K297), it is necessary to replace both components as a pair, using the latest level parts. Make sure to use secondary timing chain tensioner part number ML3Z-6K254-A and secondary timing chain guide part number ML3Z-6K297-A.
• 10183561Some 2015-2020 Mustang vehicles may exhibit a concern of the rear seat cover appearing loose or having the foam underneath the seat cover exposed. This condition is most apparent at the front outer corners of the lower seat cushion. This may be due to the seat cover coming loose. This can be corrected by tucking the corners of the seat cushion underneath the seat cover. Any loose seat cover material can also be tucked under the cover. Replacement of the seat cushion cover is not necessary to correct this condition.
• 10181906Some 2015-2020 Mustang vehicles may exhibit a concern of no horizontal movement of the front power seats. This may be caused by a defective seat track motor or separation of the drive motor cable from the seat track. The seat track motor assembly is available separately (14547) and replacement of the complete seat frame assembly (9661711) may not be required. Refer to Workshop Manual, Section 501-10A for seat track motor removal.
• 10180674Some 2015-2020 F-150/Mustang, 2016-2020 Edge, 2016-2018 MKX and 2019-2020 Nautilus vehicles built on or before 18-Jan-2020 may exhibit a mirror click and/or ratcheting noise when using memory functions or easy entry/exit function. This may be due to the software in the driver door module (DDM) and passenger door module (PDM). To correct the condition, reprogram the DDM and PDM with the latest software level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14B291 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.

Every Ford Mustang model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.