2021 Ford Mustang
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Mustang › 2021
These records cover every 2021 Ford Mustang. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2021 Ford Mustang. Newest first.
Ford Motor Company (Ford) is recalling certain 2021-2023 Mustang vehicles repaired incorrectly under recall number 23V727. The brake fluid level sensor may not activate the visual warning indicator when the brake fluid is low. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle…
Risk and remedy
Risk
Without a low brake fluid warning light, the vehicle may be driven with low brake fluid, reducing braking performance and increasing the risk of a crash.
Remedy
Dealers will update the body control module software, free of charge. Owner notification letters were mailed December 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C55. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning November 17, 2025.
Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.
Risk and remedy
Risk
An engine stall increases the risk of a crash.
Remedy
Dealers will replace the low pressure fuel pump on super duty vehicles and update the powertrain control module (PCM) software on all other affected vehicles, free of charge. Owner notification letters were mailed July 27, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A…
Risk and remedy
Risk
A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
Remedy
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
Ford Motor Company (Ford) is recalling certain 2020-2023 Mustang vehicles. The brake fluid level sensor may not activate the visual warning indicator when the brake fluid is low. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
Risk and remedy
Risk
Without a low brake fluid warning light, the vehicle may be driven with low brake fluid, reducing braking performance and increasing the risk of a crash.
Remedy
Dealers will update the body control module software, free of charge. Owner notification letters were mailed December 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C35.
Ford Motor Company (Ford) is recalling certain 2021-2022 Mustang vehicles. An insufficient weld on the front passenger knee air bag may result in an improper air bag deployment.
Risk and remedy
Risk
An improper air bag deployment can increase the risk of injury during a crash.
Remedy
Dealers will replace the front passenger knee air bag, free of charge. Owner notification letters were mailed on March 8, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S07.
Ford Motor Company (Ford) is recalling certain 2021 Mustang vehicles. The side curtain air bag inflators may have been manufactured with the incorrect amount of compressed gas, which can result in improper air bag inflation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 226, "Ejection…
Risk and remedy
Risk
An air bag that does not inflate properly can increase the risk of injury in a crash.
Remedy
Dealers will replace the side curtain air bags, free of charge. An interim owner notification letter was mailed on February 3, 2022. Owner notification letters were mailed on April 22, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C37.
Owner complaints
55 complaints4 involved a crash2 injuries
What owners report most
Latest complaints
- Fuel/propulsion system
My vehicle, VIN [XXX], is subject to NHTSA Recall 25V455 (Ford Recall 25S75) involving a defective low-pressure fuel pump that may cause engine hesitation, loss of power, or engine stalling. This recall was announced in July 2025 and remains open on the NHTSA VIN lookup as of June 2026. More than…
My vehicle, VIN [XXX], is subject to NHTSA Recall 25V455 (Ford Recall 25S75) involving a defective low-pressure fuel pump that may cause engine hesitation, loss of power, or engine stalling. This recall was announced in July 2025 and remains open on the NHTSA VIN lookup as of June 2026. More than eleven months have passed since the recall was announced, and Ford has not provided a repair remedy for my vehicle. I believe this is an unreasonable delay for a safety-related defect. In addition, the recall previously appeared in the FordPass application associated with my vehicle but no longer appears there, even though both the NHTSA and Ford recall website VIN lookup continues to show the recall as open. This discrepancy creates confusion regarding the status of the recall and whether Ford is actively notifying affected owners. I am concerned that my vehicle remains subject to a known safety defect without an available repair and request that NHTSA review Ford’s handling of Recall 25V455, the prolonged delay in providing a remedy, and the inconsistency between Ford’s customer-facing systems and the NHTSA recall database. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Structure › Body
Driver door opened to secondary latch position while driving on the highway at 70mph on 5/16/2026. The warning system came on and driver had to navigate holding the door and stopping safely during high speed traffic to close the door. Will take to dealership when next available opening day. No…
Driver door opened to secondary latch position while driving on the highway at 70mph on 5/16/2026. The warning system came on and driver had to navigate holding the door and stopping safely during high speed traffic to close the door. Will take to dealership when next available opening day. No accident or police were involved. Driver found older warning affecting same year,make,model for recall but unsure if problem was corrected before purchase or if this vin# was included in recall campaign. Campaign 21N10.
- Back over prevention › Rearview system braking
The backup camera goes blank and says to contact Ford
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact stated that while driving approximately 65 MPH, the vehicle shuddered while depressing the accelerator pedal. The contact stated that there was a banging sound coming from the vehicle. There was no warning light illuminated while pulling over to the…
The contact owns a 2021 Ford Mustang. The contact stated that while driving approximately 65 MPH, the vehicle shuddered while depressing the accelerator pedal. The contact stated that there was a banging sound coming from the vehicle. There was no warning light illuminated while pulling over to the shoulder of the roadway. The contact restarted the vehicle and drove slowly to the destination. The contact then received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The local dealer was made aware of the failure and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The vehicle was not repaired. The failure mileage was approximately 2,700.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact stated that while driving at various speeds, the vehicle started losing automotive power. The vehicle had stalled several times. The vehicle was able to restart, and the loss of automotive power was intermittent. The contact received notification of…
The contact owns a 2021 Ford Mustang. The contact stated that while driving at various speeds, the vehicle started losing automotive power. The vehicle had stalled several times. The vehicle was able to restart, and the loss of automotive power was intermittent. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part was not yet available. The contact called a local dealer and the manufacturer several times and was informed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 48,000.
- Engine · Power train
A steady Check Engine Light came on after starting the car; brought it to Ford Dealer of Montebello and they stated coolant leak and got into one of the cylinders that caused misfires.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact stated that in May 2025, there was a misfire in the engine after refueling with warm fuel. The check engine warning light was flashing on the instrument cluster. The contact later received notification of NHTSA Campaign Number: 25V455000 (Fuel…
The contact owns a 2021 Ford Mustang. The contact stated that in May 2025, there was a misfire in the engine after refueling with warm fuel. The check engine warning light was flashing on the instrument cluster. The contact later received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); and associated the misfire with the recall. The local dealer was contacted, and the contact was informed that the recall repair was not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 13,000.
- Fuel/propulsion system
At highway speed (60-65mph), in 6th gear, cruise control activated, the car began to surge and stall and loose power. Applying more throttle to maintain speed did not help. Pulled to roadside and engine stalled. No check engine light at that time. Re-started with rough idle, check engine light…
At highway speed (60-65mph), in 6th gear, cruise control activated, the car began to surge and stall and loose power. Applying more throttle to maintain speed did not help. Pulled to roadside and engine stalled. No check engine light at that time. Re-started with rough idle, check engine light illuminated, attempted to drive again but there was no power, vehicle stalled again. Tried to crank again with crank-no start, check engine light on. Car had approx. 1/4 tank fuel and range of 80 miles to empty. Had to tow. After towing home about 2 hours post-incident, car is still crank-no start. Scanned for codes: P0087:00- 64, P008A:00-EC, P00C6:00-26, P008A:00 fuel pressure low codes.
- Back over prevention
The contact owns a 2021 Ford Mustang. The contact stated that while reversing, the rear-view camera display glitched and switched between a black and a blue colored screen. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The dealer was made aware of the failure…
The contact owns a 2021 Ford Mustang. The contact stated that while reversing, the rear-view camera display glitched and switched between a black and a blue colored screen. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The dealer was made aware of the failure; however, the contact was informed that a diagnostic test was needed. The contact referenced an unknown recall with a similar failure description; however, the VIN was not associated with the VIN. The manufacturer was not made aware of the failure. The failure mileage was approximately 72,500.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact stated that while driving at various speeds, the accelerator pedal was depressed, the vehicle hesitated and the engine misfired, and the vehicle failed to respond as needed. The contact stated that the check engine warning light was illuminated. The…
The contact owns a 2021 Ford Mustang. The contact stated that while driving at various speeds, the accelerator pedal was depressed, the vehicle hesitated and the engine misfired, and the vehicle failed to respond as needed. The contact stated that the check engine warning light was illuminated. The contact called a local dealer and was advised that there was a recall associated with the VIN under NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline). The contact was advised by the dealer that the remedy was not yet available. The contact stated that the failure was a recurring failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was 44,878.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline). The contact stated that while the vehicle was stopped and the accelerator pedal was depressed on several occasions, the vehicle hesitated to accelerate as intended.…
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline). The contact stated that while the vehicle was stopped and the accelerator pedal was depressed on several occasions, the vehicle hesitated to accelerate as intended. The contact stated that there were no warning lights illuminated. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was approximately 5.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V455000 (FUEL SYSTEM, GASOLINE); however, the part to do the recall repair was not yet available. The contact stated that while driving in stop-and-go traffic, the vehicle hesitated. The contact…
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V455000 (FUEL SYSTEM, GASOLINE); however, the part to do the recall repair was not yet available. The contact stated that while driving in stop-and-go traffic, the vehicle hesitated. The contact pulled into a gas station where the vehicle experienced vapor lock. The vehicle failed to restart, with an abnormal cranking sound coming from the vehicle. After several attempts, the contact was able to restart the vehicle. No warning lights were illuminated. The contact stated that on a separate occasion, the failure persisted. The contact called the dealer and was informed that the failure might be caused by the purge valve. The vehicle was not repaired. The contact stated that the failures occurred when the vehicle had a half tank to a full tank of fuel. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 5,000.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, parts were not yet available for the recall repair. The contact stated that parts had not yet been available for six months. The contact was concerned that…
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, parts were not yet available for the recall repair. The contact stated that parts had not yet been available for six months. The contact was concerned that the vehicle could lose motive power while driving at 65 MPH. The contact stated that if the failure occurred while driving, he could be killed. The contact was informed by two dealers that the parts were not yet available, and there was no available date for the parts' availability. The manufacturer was not contacted. The contact had not experienced a failure.
- Electrical system
I recently purchased this car. The rear back-up camera was in a flip flopped state. Meaning, what was displayed on the cabin screen on the left, was actually on the right plus the guiding lines on the screen were missing. I purchased and installed a new camera from ford. This fixed the flip…
I recently purchased this car. The rear back-up camera was in a flip flopped state. Meaning, what was displayed on the cabin screen on the left, was actually on the right plus the guiding lines on the screen were missing. I purchased and installed a new camera from ford. This fixed the flip flopped immage , but, not the missing lines on the screen. securing the wires I noticed the wiring harness at the bend at the deck and lid was fully exposed to being frayed by the metal deck lid. I did not see any copper wire showing. But, I wonder how long it will take to fray to raw wire? I also own a 2015 mustang GT that was recalled for the exact same condition. that wiring harness was replaced by my local ford dealership in 2024.
- Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact stated that while depressing the accelerator pedal, the vehicle hesitated and then vibrated. The contact stated that the failure only occurred while attempting to accelerate. There was no warning light illuminated. The contact received notification…
The contact owns a 2021 Ford Mustang. The contact stated that while depressing the accelerator pedal, the vehicle hesitated and then vibrated. The contact stated that the failure only occurred while attempting to accelerate. There was no warning light illuminated. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline). However, when the dealer was contacted, the contact was informed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not informed of the failure. The failure mileage was approximately 44,000.
- Electrical system
Rear camara is inconsistent but lately works 25% of the time.
- Engine · Fuel/propulsion system
While entering an on-ramp and just before merging onto the freeway the vehicle failed to accelerate and I lost complete power from the engine. The vehicle was still powered on, but produced no combustion from the engine. The check engine light illuminated and a message appeared on the dash stating…
While entering an on-ramp and just before merging onto the freeway the vehicle failed to accelerate and I lost complete power from the engine. The vehicle was still powered on, but produced no combustion from the engine. The check engine light illuminated and a message appeared on the dash stating to shift the vehicle into neutral. I pulled off on the shoulder and shifted the vehicle into park. I shut the vehicle off and started it back up. After doing so I had full power once again. This is the sixth time this has happened.
- Fuel system, gasoline
The contact owns 2021 Ford Mustang. The contact stated that while her husband was attempting to make a right turn, the vehicle stalled. The vehicle was turned off however, while attempting to restart the vehicle the vehicle failed to respond as needed. No warning light was illuminated. A dealer was…
The contact owns 2021 Ford Mustang. The contact stated that while her husband was attempting to make a right turn, the vehicle stalled. The vehicle was turned off however, while attempting to restart the vehicle the vehicle failed to respond as needed. No warning light was illuminated. A dealer was contacted. The vehicle was towed to a dealer where it was diagnosed and determined that the fuel pump and battery needed to be replaced. The vehicle was repaired. The contact related the failure to NHTSA Campaign Number: 25V455000 (FUEL SYSTEM, GASOLINE); however, the VIN was not included in the recall. The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recall. The failure mileage was 4,855.
- Engine · Fuel system, gasoline
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number:25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2021 Ford Mustang. The contact received notification of NHTSA Campaign Number:25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that after storing the vehicle in storage for the winter and connecting a battery retainer, the check engine warning light temporarily illuminated for one day. The dealer was contacted and was unsure when parts would be available. The contact called another dealer, Evansville Ford (428 N Union Rd, Evansville, WI 53536); who was unable to confirm when parts would be available. The manufacturer was not made aware of the failure. The failure mileage was approximately 21,000. VIN tool confirms parts not available.
- Engine · Fuel/propulsion system
My 2021 Ford Mustang EcoBoost is currently experiencing an ongoing issue with the EVAP purge valve, a critical emissions component. The vehicle suffers from stuttering, rough idle, and a check engine light, especially immediately after refueling, where the engine has stalled multiple times—posing a…
My 2021 Ford Mustang EcoBoost is currently experiencing an ongoing issue with the EVAP purge valve, a critical emissions component. The vehicle suffers from stuttering, rough idle, and a check engine light, especially immediately after refueling, where the engine has stalled multiple times—posing a serious safety risk during traffic re-entry and acceleration.The purge valve has not been replaced, and the issue remains unresolved. I contacted Ford Customer Relations and three separate Ford dealerships, all of which refused to service the vehicle under warranty, despite the fact that it is still covered under the federal emissions warranty (8 years/80,000 miles) and the powertrain warranty.This refusal contradicts federal warranty guidelines, as the purge valve is clearly part of the evaporative emissions control system. The failure disrupts vapor flow and fuel trim stability, leading to erratic engine behavior and emissions system malfunction.I previously owned another Ford Mustang EcoBoost while living in a different part of the state, and that vehicle experienced the exact same purge valve issue, including stalling after refueling and triggering the check engine light. This recurring failure across multiple vehicles suggests a design flaw or supplier defect that Ford has failed to address.There are hundreds of documented complaints and videos online, including on YouTube and Mustang forums, showing other owners experiencing the same purge valve failure and warranty denial. This suggests a systemic issue that Ford is aware of but continues to ignore.I believe this issue warrants investigation for warranty non-compliance, emissions system reliability, and potential recall consideration due to the safety and environmental risks involved.
- Back over prevention
The contact owns a 2021 Ford Mustang. The contact stated that while reversing, the rearview camera image was distorted and black intermittently. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that rearview camera needed to be replaced. The…
The contact owns a 2021 Ford Mustang. The contact stated that while reversing, the rearview camera image was distorted and black intermittently. There was no warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed that rearview camera needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA campaign number: 25V315000(Back Over Prevention); however, the VIN was not included in the recall. The manufacturer was notified of the failure and confirmed that the VIN was not included in the recall. The contact was referred to the NHTSA Hotline for assistance. The failure mileage was 53,291.
- Power train
Vehicle stalled while pulling into traffic from apartment driveway.
- Unknown or other
Reverse camera stopped working.
- Power train
While driving my 10R80 automatic transmission shifted into neutral even though the shifter was positioned in drive. I was unable to accelerate and was forced to pull over on the side of the road to prevent an accident from occurring. I placed the shifter into park and turned the car off. I then started the vehicle back up and began driving. The transmission continuously shifted rough while driving my destination.
- Engine
Vehicle engine is noisy with grinding sounds coming from lower side of engine, can be heard at idle speeds plus popping, ticking. Engine has no power, smells like raw fuel. Engine internal problems exist at 46,000 miles. Vehicle feels like will stall any minute. Ford engine V8 GT Fastback, Ford…
Vehicle engine is noisy with grinding sounds coming from lower side of engine, can be heard at idle speeds plus popping, ticking. Engine has no power, smells like raw fuel. Engine internal problems exist at 46,000 miles. Vehicle feels like will stall any minute. Ford engine V8 GT Fastback, Ford Mustang. Engine internal parts grinding, popping and ticking sounds from engine while running. Under warranty but dealer is not honoring warranty. Nielsen Ford, Morristown, NJ.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009440Some 2020-2022 Mustang Shelby GT500 vehicles may exhibit a transmission fluid leak at the mating surface between the rear transmission fluid cooler tubes and transmission case.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11008391Various Vehicles Equipped With A 10R80 Automatic Transmission - Harsh/Delayed Engagement And/Or Harsh/Delayed Shift - Built On Or Before 15-Aug-2022
- 11007073Certain 2021-2022 Model Year Mustang Mach E and 2022 Model Year E-Transit High Voltage Battery Module (HVBM) Replacement In all of the affected vehicles, a High Voltage Battery Module (HVBM) was previously replaced using an incorrect Thermal Interface Material (TIM) template. A HVBM that has been serviced using the incorrect TIM template may cause the cells to operate at a temperature higher than design intent, resulting in reduced cell performance and, over time, a progressive reduction in vehicle range that may become noticeable to the driver. This may also result in a malfunction indicator light, DTC code and battery power limiting.
- 11006862Some 2019-2024 Ford and Lincoln vehicles equipped with a telematics control unit module (TCU) may exhibit the Location toggle button in the Connectivity setting menu grayed out with an inability to switch it off.
- 11006772Some 2020-2022 Explorer, 2020-2023 Transit, 2021-2022 F-150, 2021-2022 Mustang and 2022 Expedition/Navigator vehicles equipped with a 10R80 transmission (excluding hybrid) may exhibit harsh/delayed engagements and/or harsh/delayed shifts, an illuminated MIL with DTC P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the PCM or TCM. This may be due to axial movement of the CDF clutch cylinder (7H351) sleeve causing hydraulic circuit leaks. To correct the condition, follow the Service Procedure to verify hydraulic circuit leakage and replace the CDF clutch cylinder (7H351) if necessary.
- 11006036Certain 2018 - 2024 Model Year Various Vehicles Update SYNC Software In all the affected vehicles, due to an error in the SYNC software, you may experience SYNC system instability concerns and/or a failure to preserve certain settings across ignition cycles. This may result in a black infotainment screen that does not affect rear view camera, incorrect language setting, erased or unsaved radio presets, and potential inability to perform software updates.
- 11005746Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various FordPass/LincolnWay connectivity concerns including but not limited to: missing activation prompt (pop-up) on the vehicle's center display screen when attempting to activate vehicle through FordPass/LincolnWay, incorrect location/global positioning system (GPS) reported through FordPass/LincolnWay, problems with remote commands being performed through FordPass/LincolnWay, incorrect data/information reported on FordPass/LincolnWay. These symptoms will be accompanied by diagnostic trouble code (DTC) B156D:89 in the TCU. This may be due the accessory protocol interface module (APIM) software
- 11005710Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System (FDRS) or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level NU5T-14G381-AB/BB. The current software level can be verified in the SYNC tab of Professional Technician System (PTS) or using the vehicle's center display screen, Settings > General > About. To correct the condition, run the universal USB updater. If unsuccessful, using the latest software version of the FDRS scan tool, run the service function "APIM - Reset the Accessory Protocol Interface Module Application" and select "Clear All User Data" option. The center display screen will reboot. As soon as the vehicle's center display screen displays the boot up logo, immediately reinsert the same universal serial bus (USB) drive that was utilized during the prior failed programming attempt.
- 11003146Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System, or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level
- 11001646This article supersedes TSB 23-2307 to update the Service Procedure and vehicle model years affected. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Transit Connect, 2019-2023 Mustang, 2019-2023 Ranger, 2020-2021 Expedition/Navigator, 2020-2022 Escape/Corsair/Super Duty/EcoSport, 2020-2024 Explorer/Aviator/Transit, 2021-2024 Bronco Sport, 2022-2024 Maverick vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update theaccesory protocol interface module (APIM) software.
- 11001364Some 2018-2023 Mustang vehicles equipped with a 5.0L engine and a 10R80 transmission may exhibit a buck/jerk sensation that may be perceived as an engine misfire during throttle tip-in between 35-45 mph (56-72 km/h) and with the transmission in 8th, 9th, or 10th gear. This buck/jerk sensation is a characteristic of the vehicle and can be compared to a like vehicle that is equipped with a similar powertrain (engine, transmission, and rear end gear ratio) driven in the same manner. A diagnostic trouble code (DTC) will not set because of this condition. If no DTC is set, inform the customer that the vehicle is operating as designed. If a misfire DTC is present, the DTC should be diagnosed first following the correct diagnostic procedure outlined in the Workshop Manual, Section 303-07B.
- 11000297Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
- 11000294Some 2020-2022 Mustang GT500 vehicles may exhibit a lack of power and/or an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1228. This may be due to the one-way clutch on the supercharger drive assembly. With the supercharger belt removed, a failed one-way clutch within the pulley rotates freely in both directions. The supercharger drive assembly KR3Z-6J022-B is now available as a lower level service part, separate from the supercharger assembly. Refer to the parts catalog and Workshop Manual (WSM), Section 303-12 for installation.
- 11000181Some 2020-2022 Mustang GT500 vehicles may exhibit a lack of power and/or an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1228. This may be due to the one-way clutch on the supercharger drive assembly. With the supercharger belt removed, a failed one-way clutch within the pulley rotates freely in both directions. The supercharger drive assembly KR3Z-6J022-B is now available as a lower level service part, separate from the supercharger assembly. Refer to the parts catalog and Workshop Manual (WSM), Section 303-12D for installation.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10253687Some 2018-2024 Mustang vehicles built on and after 04-Dec-2017 may exhibit a ting, pop, clunk, or click noise from the rear wheel hub when accelerating, applying brakes, or when shifting between drive/reverse (torque reversals). This condition may be caused by stick/slip between the hub and halfshaft interface during the torque reversals creating the ting, pop, clunk, or click noise. To correct the condition, refer to the Workshop Manual (WSM) to replace the halfshaft and hub assembly of the suspected side(s).
- 10253683Some 2018-2024 Mustang vehicles built on 04-Dec-2017 and through 01-Oct-2023 may exhibit a ting, pop, clunk, or click noise from the rear wheel hub when accelerating, applying brakes, or when shifting between drive/reverse (torque reversals). This condition may be caused by stick/slip between the hub and halfshaft interface during the torque reversals creating the ting, pop, clunk, or click noise. To correct the condition, refer to the Workshop Manual (WSM) to replace the halfshaft and hub assembly of the suspected side.
- 10253559Some 2020-2023 Mustang vehicles may exhibit a configuration failure when trying to program a BCM for field service action (FSA) 23C35. This may be due to the Integrated Diagnostic System (IDS) software level. To correct this condition, make sure the IDS software is at R130.04 or newer when configuring the BCM. If the state of charge (SOC) is less than 50%, charge the battery by attaching the battery charger's negative clamp to the engine or chassis ground and not the negative battery terminal. Refer to Workshop Manual (WSM), Section 414-01.
- 10253552Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
- 10252713Quality improvements include: -Add soft button on SYNC screen for frunk electronic latch function.
- 10252674This article supersedes TSB 24-2046 to update the Service Procedure LTIS statement. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251951Some 2011-2024 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a tick tap and/or typewriter ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150F (65C) or higher and engine speed is at idle up to approximately 1700 RPM. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise tick rate can be faster or slower and is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted. This information along with an example audio clip has been added to the WSM Section 303-00 Engine System General Information > Diagnosis and Testing > Engine > PPT F > Step F2.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10251493Software Update 24-PU0102-CHG-SUFX for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include: - Improved robustness in alignment of turtle light display to reduced power event. - Improved AC Charge process reporting accuracy - Improves HV Battery Charging experience. - Robustness actions for DC Fast Charge: charging and diagnostics. - Improvements to On Demand Preconditioning. - The customer is instructed to exit the vehicle when a battery hazard is detected. - Adds torque to front drive unit to help whine at 30- 70 mph coast condition - Corrects software issue relating to charging which may occur after the BCCM receives an Over The Air (OTA) update. - Corrects ABS cal files
- 10251472Software Update FPU 23-PU1113-UNX-DC for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include- The customer is instructed to exit the vehicle when a battery hazard is detected
- 10251469This article supersedes TSB 23-2350 to update the Issue statement and the Service Procedure. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10250852Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10246072Certain 2015 2021 Model Year Mustang Convertible Vehicles - Door Opens to Secondary Latch Position
- 10245418Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10244797This article supersedes TSB 21-2220 to update the model years affected and part list. Some 2018-2024 Mustang coupe vehicles may exhibit a sagging headliner or gap where the headliner meets the upper door weatherstrip. This may be due to an outward bent door frame moulding not allowing the weatherstrip to overlap the headliner properly. To correct this condition, follow the Service Procedure to replace the door frame moulding.
- 10244707Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
- 10243648Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report if there is a customer concern of whine noise describing operating conditions and noise severity.
- 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
- 10241543This article supersedes TSB 23-2168 to update the vehicle line affected. Some 2021-2022 Mustang Mach-E (non-GT) vehicles equipped with all-wheel drive (AWD) may exhibit a whine noise from the front drive unit when driving steady at speeds between 30-40 mph (48-64 km/h) without diagnostic trouble codes (DTCs) present. This may be due to software parameters. To correct the condition, follow the Service Procedure to reprogram the powertrain control module (PCM).
- 10241447This article supersedes TSB 22-2428 and 23-2176 to update the Issue, Action and Service Procedure. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60/10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10240305Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471
- 10240266SPL Parts, Inc. manufacturers and distributes aftermarket lower control arms for dedicated competition vehicles and "track day" cars some of which may be used on both track and highway. SB 23-01 adresses proper installation torque of cap bolt fasteners attaching SPL's aftermarket lower control arms, recurring inspection and confirmation of torque setting and removal and replacement of damaged or under torqued fasteners to reduce risk of premature failure and accident. SB-23-01 was mailed, emailed and posted on SPL website to known resellers, race teams and users of the affected parts and is being submitted here as required by part 579.5. Vehicle Applications include: BMW series 1,2,3,& 4, 2008-2023; Chevrolet Camaro 26-2023, Cadillac ATS, CTS 2016-2019; Ford Mustang 2015-2023; Toyota Supra 2020-2023.
Every Ford Mustang model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.