2023 Ford Mustang
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Mustang › 2023
These records cover every 2023 Ford Mustang. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2023 Ford Mustang. Newest first.
Ford Motor Company (Ford) is recalling certain 2021-2023 Mustang vehicles repaired incorrectly under recall number 23V727. The brake fluid level sensor may not activate the visual warning indicator when the brake fluid is low. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle…
Risk and remedy
Risk
Without a low brake fluid warning light, the vehicle may be driven with low brake fluid, reducing braking performance and increasing the risk of a crash.
Remedy
Dealers will update the body control module software, free of charge. Owner notification letters were mailed December 11, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C55. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning November 17, 2025.
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A…
Risk and remedy
Risk
A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
Remedy
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
Ford Motor Company (Ford) is recalling certain 2022-2023 Ford Mustang vehicles previously repaired incorrectly under recall number 24V-493. The secondary steering torque sensor may not be calibrated properly, which can cause the steering wheel to turn side to side against the driver's intentions.
Risk and remedy
Risk
A steering wheel that turns unintentionally can cause a loss of vehicle control and increase the risk of a crash.
Remedy
Dealers will update the power steering control module (PSCM) software, free of charge. Owner notification letters were mailed March 25, 2025. Owners may contact Ford customer service at 866-436-7332. Ford's number for this recall is 25S11.
Ford Motor Company (Ford) is recalling certain 2022-2023 Ford Mustang vehicles. The secondary steering torque sensor may not be calibrated properly, which can cause the steering wheel to turn side to side against the driver's intentions.
Risk and remedy
Risk
A steering wheel that turns unintentionally can cause a loss of vehicle control and increase the risk of a crash.
Remedy
Dealers will update the power steering control module (PSCM) software, free of charge. Owner notification letters were mailed on October 11, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S44.
Ford Motor Company (Ford) is recalling certain 2020-2023 Mustang vehicles. The brake fluid level sensor may not activate the visual warning indicator when the brake fluid is low. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
Risk and remedy
Risk
Without a low brake fluid warning light, the vehicle may be driven with low brake fluid, reducing braking performance and increasing the risk of a crash.
Remedy
Dealers will update the body control module software, free of charge. Owner notification letters were mailed December 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C35.
Ford Motor Company (Ford) is recalling certain 2022-2023 F-150, Mustang, Explorer, Bronco, and 2023 Lincoln Aviator vehicles equipped with automatic transmissions. The transmission may contain a loose bolt which could prevent the transmission from engaging the park gear, although the gear shifter position may indicate that the vehicle has been shifted to…
Risk and remedy
Risk
The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury.
Remedy
Dealers will inspect and, if necessary, replace the transmissions, free of charge. Owner notification letters were mailed April 25, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S06.
Owner complaints
15 complaints5 involved a crash
What owners report most
Latest complaints
- Electrical system · Unknown or other · Visibility/wiper
While backing up back up camera suddenly went to a blue screen unable to see anything.
- Forward collision avoidance › Warnings · Power train
While driving up hill in low gear, the vehicle suddenly will jerk, a service light will come on, and a powertrain warning will occur. When this happens, it warns that the pre-collision assist is unavailable, as well as the exhaust mode selection. Once this occurs, the vehicle becomes much more…
While driving up hill in low gear, the vehicle suddenly will jerk, a service light will come on, and a powertrain warning will occur. When this happens, it warns that the pre-collision assist is unavailable, as well as the exhaust mode selection. Once this occurs, the vehicle becomes much more difficult to drive as the rev match no longer occurs, the vehicle no longer increases revs as you start releasing the clutch, and when in gear it becomes more jerky as you are driving along. I don't have the experience but I suspect it is essentially in a low power mode with minimal computer aid. After being able to pull off and turn the car off for a number of minutes (not off and on as that does not resolve it), the vehicle returns to normal. This has happened twice now while driving on the same section of roadway in almost the exact same spot. I previously called the dealer after the first time and they told me if it happens again to bring it in. They did not seem interested in looking at it. I will be hopefully doing that tomorrow. I am not sure if it is related, but the vehicle did seem like it was running rich earlier in the day (a slight smell of gas when driving by).
- Steering
The contact owns a 2023 Ford Mustang. The contact received notification of NHTSA Campaign Number: 24V493000 (Steering); however, the part to do the recall repair was not yet available. The contact stated while driving at an undisclosed speed, the steering wheel was shaking abnormally. The local…
The contact owns a 2023 Ford Mustang. The contact received notification of NHTSA Campaign Number: 24V493000 (Steering); however, the part to do the recall repair was not yet available. The contact stated while driving at an undisclosed speed, the steering wheel was shaking abnormally. The local dealer was contacted; however, no assistance was provided. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 3,000. VIN tool confirms parts not available.
- Electrical system · Engine · Service brakes
As i proceeded to get over on a highway with cars speeding, my car would not allow me to move over because it would not accerlate to be safe and my car slowed down as if there was no power as I had to get to the side of the highway to avoid getting hit as cars were traveling at a high rate of…
As i proceeded to get over on a highway with cars speeding, my car would not allow me to move over because it would not accerlate to be safe and my car slowed down as if there was no power as I had to get to the side of the highway to avoid getting hit as cars were traveling at a high rate of speed. My car then stopped and I was forced to move into the grass to avoid getting hit and causing a wreck. The speed limit was 80 mph and I was traveling at 72 mph. As I try to increase my speed but the car seemed it did not have enough power. The next day I called to report it and take it to the shop, I was informed to not drive the car for my safety. The diagnosis was that one of the fuel lines stopped working and the control module was a recall. My niece and myself was put in danger as well as the emotional fear to drive the car. This occured on June on June the 20th and the car was picked up on June the 24th. It was a recall issue. I was told by Ford Corporation that because it was fixed and I was safe then the matter was closed. Next incident, I reported that my lights and radio keep going off and then dimmed. I was driving, and had no lights at certain times at night. As I passed a non-lited highway, I could not see the direction I was traveling. During a rain storm at night, I had it continued to dim then go dark then back on. This was also another recall. I was advise that it was fixed so I had recourse against the manfualted ford corporation. At 16,000 miles, the tires had no tread because the same tires have been recalled. This stopped my ability to drively safe and advoid stopping when needed. There were other issues, the car was taken in. There is a current recall that the is no remedy, that I could lose sterring and the wheel will cause a crash. I am one of the 30,000 mustang that are having safety problems and are in the risk of crashes. I am in fear of driving the car, was denied of a buy back insure that I am not in danger.
- Electrical system · Fuel/propulsion system
This is the 3rd recall no counting issue that did no include recall. One of the fuel injectors stop working and caused my car to stop while running. Without warning of fuel injector not working, my car would be hestiate to accerate and when i got the warning, i was informed to not drive the car…
This is the 3rd recall no counting issue that did no include recall. One of the fuel injectors stop working and caused my car to stop while running. Without warning of fuel injector not working, my car would be hestiate to accerate and when i got the warning, i was informed to not drive the car because it would cause a wreck or without warning stop. My alert went off that my air quality inside the car was dangerous and to return the vechicle asap to ensure my safety. I have had my car in the dealership 6 times and one of the recalls can not be fixed at this time which causes my steering system to turn opposite directions and warned that it was in danger of wrecking. Not only does the problems could harm myself but as well as innocent drivers on the road. I have been with ford since 2006 and never have I experienced such suffering. I am a teacher and not having transporation or taking off of work has cost me over 2000.00 and I havent even had my a year when the issues staring happening. Ford Corporation will not ensure my safety under the lemon law, and i have had to go without the ability to support myself as well as my elderly mother. I was involved in a wreck 4 days after the car was a year old and was found at fault as I tried to stop, it car inch up by by 2 feet. I had to pay two thousand for a deductible and then my insurance was charged for used parts on my car. Ford Corporation ask me not to contact my insurance but informed me that they are no a direct car repair shop but it is represent as a collosion center with the ford name. My tires were not driveable at 21, 000 miles but was told that they were suppose to last 26, 000 miles. They were provided from Ford itself. They then put recalled tires on the car which cause me to lose traction and I could not even get them rotated with a mileage under 21,000. Currently my car has 26,000 miles and I have been put at risk on many malfunction of the car
- Steering
The contact owns a 2023 Ford Mustang. The contact received notification of NHTSA Campaign Number: 24V493000 (Steering); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time…
The contact owns a 2023 Ford Mustang. The contact received notification of NHTSA Campaign Number: 24V493000 (Steering); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The manufacturer was made aware of the issue and referred the contact to the NHSTA Hotline for assistance. VIN tool confirms parts not available.
- Steering
My steering wheel has a vibration, this problem started a few days ago, I wasn't sure what was happening until today that I got the recall from Ford. I'm afraid now, it's the first time in my whole life that I experienced this problem, really? this is brand new car. 3 recalls in one year.
- Lane departure › Assist · Steering · Unknown or other
I was driving and my steering wheel turned to the right all of a sudden and I hit a curb. The curb caused my tire to blow, messed up my wheel, and who knows how bad anything else was that was messed up from this incident.
- Unknown or other
Ongoing issues with rough idle. Threw a couple generic lean codes (p0171 and p0174) that did not stay. Stored code p061a:00-28. On my third dealer. Vehicle randomly shut off at stop sign with no codes thrown whatsoever. Tech believes the issue is the throttlebody. Ford Corp says it passes…
Ongoing issues with rough idle. Threw a couple generic lean codes (p0171 and p0174) that did not stay. Stored code p061a:00-28. On my third dealer. Vehicle randomly shut off at stop sign with no codes thrown whatsoever. Tech believes the issue is the throttlebody. Ford Corp says it passes their tests and will not warranty the replacement. Ford Corp Basically said I have to wait till total part failure. Shutting off in traffic is obviously dangerous.
- Service brakes
The contact owns a 2023 Ford Mustang. The contact stated that while driving approximately 45 MPH and making a left turn the collision avoidance system erroneously light activated although no other vehicles or structures were nearby and the braking system suddenly malfunctioned causing the brake…
The contact owns a 2023 Ford Mustang. The contact stated that while driving approximately 45 MPH and making a left turn the collision avoidance system erroneously light activated although no other vehicles or structures were nearby and the braking system suddenly malfunctioned causing the brake pedal to extend to the floor while pressed causing the driver lost control of the vehicle and crashed into a wall barrier. During the crash, no injuries were reported. A police report was taken at the scene and the vehicle was eventually towed to the local dealer. The cause of the failure was not yet determined. The manufacturer was notified of the failure but no assistance was offered. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 23V727000(Electrical System). The contact indicated that the vehicle had experienced that same failure listed in the recall. The failure mileage was 14,000.
- Air bags · Electrical system · Service brakes
The contact owned a 2023 Ford Mustang. The contact received notification of NHTSA Campaign Number: 23V727000 (Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer…
The contact owned a 2023 Ford Mustang. The contact received notification of NHTSA Campaign Number: 23V727000 (Electrical System) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer had not been contacted. The contact stated that while driving approximately 20 MPH and attempting to apply the brake pedal however the vehicle failed to stop causing them to crash into a nearby apartment building. The air bags did not deploy. The vehicle was towed to their insurance. There were no warning lights illuminated. A police report was filed. The vehicle was totaled. There were no injuries There was damage to the property. The manufacturer was made aware of the failure. The approximate failure mileage was 15,000. Parts distribution disconnect.
- Forward collision avoidance › Automatic emergency braking · Service brakes
On Nov 22nd, I met with an accident. I have a safety recall notice from Ford. NHTSA Recall number is 23V727. Because of this, the brakes were faulty leading to the accident.
- Electrical system · Fuel/propulsion system · Vehicle speed control
While attempting to accelerate at an intersection, the vehicle lurched forward. The gas peddle stopped working completely, leaving my vehicle stranded in the middle of the intersection with traffic coming from both directions. The engine was not revving when the gas peddle was being pushed. After…
While attempting to accelerate at an intersection, the vehicle lurched forward. The gas peddle stopped working completely, leaving my vehicle stranded in the middle of the intersection with traffic coming from both directions. The engine was not revving when the gas peddle was being pushed. After repeatedly slamming on the gas peddle, the vehicle quickly accelerated forward, fishtailed, and sent me into oncoming traffic, very narrowly avoiding an accident.
- Engine
The last two times I have went to start my vehicle it acts as if it is not in the park position. The brake is stiff and wont budge. I have to wiggle the shifter as much as it will let me fpr a couple minutes before it lets loose to start.
- Steering
While piloting the vehicle at speeds between approximately 27 and 37 mile per hour, the steering becomes loose and darty, creating an unstable and potentially unsafe driving experience. The problem was reproduced by a dealer as detailed in the provided repair order. The dealer contacted the manufacturer for technical assistance. There were no warnings or messages. The issue appeared in July 2023.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11006862Some 2019-2024 Ford and Lincoln vehicles equipped with a telematics control unit module (TCU) may exhibit the Location toggle button in the Connectivity setting menu grayed out with an inability to switch it off.
- 11006036Certain 2018 - 2024 Model Year Various Vehicles Update SYNC Software In all the affected vehicles, due to an error in the SYNC software, you may experience SYNC system instability concerns and/or a failure to preserve certain settings across ignition cycles. This may result in a black infotainment screen that does not affect rear view camera, incorrect language setting, erased or unsaved radio presets, and potential inability to perform software updates.
- 11005746Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various FordPass/LincolnWay connectivity concerns including but not limited to: missing activation prompt (pop-up) on the vehicle's center display screen when attempting to activate vehicle through FordPass/LincolnWay, incorrect location/global positioning system (GPS) reported through FordPass/LincolnWay, problems with remote commands being performed through FordPass/LincolnWay, incorrect data/information reported on FordPass/LincolnWay. These symptoms will be accompanied by diagnostic trouble code (DTC) B156D:89 in the TCU. This may be due the accessory protocol interface module (APIM) software
- 11005710Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System (FDRS) or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level NU5T-14G381-AB/BB. The current software level can be verified in the SYNC tab of Professional Technician System (PTS) or using the vehicle's center display screen, Settings > General > About. To correct the condition, run the universal USB updater. If unsuccessful, using the latest software version of the FDRS scan tool, run the service function "APIM - Reset the Accessory Protocol Interface Module Application" and select "Clear All User Data" option. The center display screen will reboot. As soon as the vehicle's center display screen displays the boot up logo, immediately reinsert the same universal serial bus (USB) drive that was utilized during the prior failed programming attempt.
- 11003146Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System, or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level
- 11001646This article supersedes TSB 23-2307 to update the Service Procedure and vehicle model years affected. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Transit Connect, 2019-2023 Mustang, 2019-2023 Ranger, 2020-2021 Expedition/Navigator, 2020-2022 Escape/Corsair/Super Duty/EcoSport, 2020-2024 Explorer/Aviator/Transit, 2021-2024 Bronco Sport, 2022-2024 Maverick vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update theaccesory protocol interface module (APIM) software.
- 11001364Some 2018-2023 Mustang vehicles equipped with a 5.0L engine and a 10R80 transmission may exhibit a buck/jerk sensation that may be perceived as an engine misfire during throttle tip-in between 35-45 mph (56-72 km/h) and with the transmission in 8th, 9th, or 10th gear. This buck/jerk sensation is a characteristic of the vehicle and can be compared to a like vehicle that is equipped with a similar powertrain (engine, transmission, and rear end gear ratio) driven in the same manner. A diagnostic trouble code (DTC) will not set because of this condition. If no DTC is set, inform the customer that the vehicle is operating as designed. If a misfire DTC is present, the DTC should be diagnosed first following the correct diagnostic procedure outlined in the Workshop Manual, Section 303-07B.
- 11001180This article supersedes TSBs 24-2100 and 24-2070 to add 2023 F-150 vehicles, update the TSB Issue statement and the TSB Service Procedure. Some 2021-2023 F-150, 2022-2023 Expedition/Navigator/Mustang and 2020-2023 Transit/Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 11000297Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10253891Some 2022-2023 Mustang convertible vehicles may exhibit a convertible top that requires extra effort to latch. This may be due to the convertible top assembly that is out of specification.
- 10253687Some 2018-2024 Mustang vehicles built on and after 04-Dec-2017 may exhibit a ting, pop, clunk, or click noise from the rear wheel hub when accelerating, applying brakes, or when shifting between drive/reverse (torque reversals). This condition may be caused by stick/slip between the hub and halfshaft interface during the torque reversals creating the ting, pop, clunk, or click noise. To correct the condition, refer to the Workshop Manual (WSM) to replace the halfshaft and hub assembly of the suspected side(s).
- 10253683Some 2018-2024 Mustang vehicles built on 04-Dec-2017 and through 01-Oct-2023 may exhibit a ting, pop, clunk, or click noise from the rear wheel hub when accelerating, applying brakes, or when shifting between drive/reverse (torque reversals). This condition may be caused by stick/slip between the hub and halfshaft interface during the torque reversals creating the ting, pop, clunk, or click noise. To correct the condition, refer to the Workshop Manual (WSM) to replace the halfshaft and hub assembly of the suspected side.
- 10253559Some 2020-2023 Mustang vehicles may exhibit a configuration failure when trying to program a BCM for field service action (FSA) 23C35. This may be due to the Integrated Diagnostic System (IDS) software level. To correct this condition, make sure the IDS software is at R130.04 or newer when configuring the BCM. If the state of charge (SOC) is less than 50%, charge the battery by attaching the battery charger's negative clamp to the engine or chassis ground and not the negative battery terminal. Refer to Workshop Manual (WSM), Section 414-01.
- 10253552Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
- 10252673This article supersedes TSB 24-2059 to update the Service Procedure LTIS statement. Some 2021-2022 F-150, 2022-2023 Expedition/Navigator/Mustang and 2020-2023 Transit/Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10252662This article supersedes TSB 23-2351 to remove 2023 F-150 10R80 and 10R80 MHT vehicle applications. The 2023 F-150 10R80 and 10R80 MHT vehicles will be the subject of a separate article. Some 2021-2022 F-150, 2022-2023 Expedition/Navigator/Mustang and 2020-2023 Transit/Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251951Some 2011-2024 Mustang and F-150 vehicles equipped with a 5.0L engine may exhibit a tick tap and/or typewriter ticking noise at idle after an engine oil change. It is often referred to as typewriter noise because of its similarity to the sound of a mechanical typewriter. The noise in question may be heard on some engines when engine temperatures reach 150F (65C) or higher and engine speed is at idle up to approximately 1700 RPM. It can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. The typewriter noise tick rate can be faster or slower and is not detrimental to the engine function or durability and has no short or long term effects on the engine. This an operating characteristic of the 5.0L engine and no repairs should be attempted. This information along with an example audio clip has been added to the WSM Section 303-00 Engine System General Information > Diagnosis and Testing > Engine > PPT F > Step F2.
- 10251934During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
- 10251493Software Update 24-PU0102-CHG-SUFX for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include: - Improved robustness in alignment of turtle light display to reduced power event. - Improved AC Charge process reporting accuracy - Improves HV Battery Charging experience. - Robustness actions for DC Fast Charge: charging and diagnostics. - Improvements to On Demand Preconditioning. - The customer is instructed to exit the vehicle when a battery hazard is detected. - Adds torque to front drive unit to help whine at 30- 70 mph coast condition - Corrects software issue relating to charging which may occur after the BCCM receives an Over The Air (OTA) update. - Corrects ABS cal files
- 10251472Software Update FPU 23-PU1113-UNX-DC for 2021-2023 MY Mach E vehicles is now available. Quality Improvements include- The customer is instructed to exit the vehicle when a battery hazard is detected
- 10250852Some 2020-2023 Ford and Lincoln SYNC3 equipped vehicles may experience an inaccurate notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. Vehicle Has Entered Deep Sleep Mode message is expected if the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SoC) drops below 50%. If the vehicle is going into deep sleep due to one of these conditions, follow normal Workshop Manual (WSM) Section 414-01 procedure to correct the concern. If the vehicle is going into deep sleep outside these conditions, this may be due to the telematics control unit (TCU) software. To correct this condition, follow the Service Procedure to update the TCU to the latest software. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10246123Some 2021-2023 F-150, 2022-2023 Expedition/Navigator, 2022-2023 Mustang, 2020-2023 Transit, 2020-2023 Explorer/Aviator vehicles equipped with a 10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes. stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10244823Some 2022-2023 Mustang vehicles equipped with a convertible top may exhibit a convertible top power close operation that stops 1 to 4 inches (2.5-10 cm) from the windshield header and require extra effort to latch. Component replacement is not expected to resolve this condition. Engineering is investigating a service fix expected to be released in Q1 2024. Submit a Report a Vehicle Concern form located at the bottom of the OASIS screen and attach any available pictures to assist with the engineering investigation. Continue to monitor OASIS for updates.
- 10244797This article supersedes TSB 21-2220 to update the model years affected and part list. Some 2018-2024 Mustang coupe vehicles may exhibit a sagging headliner or gap where the headliner meets the upper door weatherstrip. This may be due to an outward bent door frame moulding not allowing the weatherstrip to overlap the headliner properly. To correct this condition, follow the Service Procedure to replace the door frame moulding.
- 10244707Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
- 10243648Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report if there is a customer concern of whine noise describing operating conditions and noise severity.
- 10243424Certain 2023 Model Year Mustang Vehicles with California Special Package - Floor Mat Shortage
- 10243422Certain 2022-2023 Model Year Stealth Mustang Vehicles - Reconfigure the Body Control Module-B (BCMB) Door Sill Plate Illumination
- 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
- 10241447This article supersedes TSB 22-2428 and 23-2176 to update the Issue, Action and Service Procedure. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60/10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10240305Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471
- 10240266SPL Parts, Inc. manufacturers and distributes aftermarket lower control arms for dedicated competition vehicles and "track day" cars some of which may be used on both track and highway. SB 23-01 adresses proper installation torque of cap bolt fasteners attaching SPL's aftermarket lower control arms, recurring inspection and confirmation of torque setting and removal and replacement of damaged or under torqued fasteners to reduce risk of premature failure and accident. SB-23-01 was mailed, emailed and posted on SPL website to known resellers, race teams and users of the affected parts and is being submitted here as required by part 579.5. Vehicle Applications include: BMW series 1,2,3,& 4, 2008-2023; Chevrolet Camaro 26-2023, Cadillac ATS, CTS 2016-2019; Ford Mustang 2015-2023; Toyota Supra 2020-2023.
- 10238278Some 2020-2023 Mustang (non-GT500/GT350) vehicles equipped with vehicle dynamic suspension may exhibit a Dynamic Suspension Fault message displayed in the IPC with diagnostic trouble code (DTC) B14C1:64 with no vehicle symptoms. This may be due to software within the vehicle dynamics module (VDM). To correct the condition, reprogram the VDM using the latest software level of the appropriate Ford diagnostic scan tool.
- 10237967Some 2022-2023 Mustang vehicles equipped with a convertible top may exhibit a convertible top power close operation that stops 1 to 4 inches from the windshield header and require extra effort to latch. Component replacement is not expected to resolve this condition. Engineering is investigating a service fix expected to be released in Q3 2023. Submit a Report a Vehicle Concern form located at the bottom of the OASIS screen and attach any available pictures to assist with the engineering investigation. Continue to monitor OASIS for updates.
- 10237786TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
- 10237335Some 2022-2023 F-150/Bronco/Expedition/Navigator/Escape/Corsair/Bronco Sport/Edge/Mustang vehicles built on 04-Sep-2022 and through 30-Dec-2022 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0230 stored in the powertrain control module (PCM). The vehicle may also experience a no start or stall after start. This may be due to an internal PCM issue. If this DTC is present, verify the battery condition, then perform pin point test (PPT) KC of the Work Shop Manual (WSM), Section 310-01. If PPT KC leads to component replacement, start with replacing the PCM and then evaluate the vehicle. If the DTC returns, follow WSM, Section 310-01 PPT KC direction to address the issue.
Every Ford Mustang model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.