2019 Ford Ranger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Ranger › 2019
These records cover every 2019 Ford Ranger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2019 Ford Ranger. Newest first.
Ford Motor Company (Ford) is recalling certain 2016-2019 Lincoln MKC, 2016-2023 Explorer, 2019-2020 Fusion, 2019-2024 Ranger, 2020-2022 Lincoln Corsair, Escape, 2021-2024 Bronco, Bronco Sport, and 2022-2024 Maverick vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Risk and remedy
Risk
An electrical short circuit can increase the risk of a fire.
Remedy
Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded blanking plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed December 3, 2025. Additional letters will be sent once the final remedy is available, anticipated December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 15, 2025.
Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
Risk and remedy
Risk
A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A…
Risk and remedy
Risk
A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.
Remedy
Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
Ford Motor Company (Ford) is recalling certain 2022-2023 Bronco, 2023 Super Duty F-250, and 2019-2023 Ranger vehicles. The Tire and Loading Information (TREAD) label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard…
Risk and remedy
Risk
An overloaded vehicle increases the risk of a crash.
Remedy
Ford will mail a new TREAD label to install over the existing label, free of charge. Owners will also have the option to take their vehicle to a Ford or Lincoln dealer to have the new label installed, free of charge. Owner notification letters were mailed July 21, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C18.
Ford Motor Company (Ford) is recalling certain 2019-2021 Ford Ranger Super Cab vehicles. The front passenger outboard seat belt may not have been assembled properly, allowing the seat belt to be misrouted. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection" and 209…
Risk and remedy
Risk
A misrouted seat belt may not adequately restrain an occupant in a crash, increasing the risk of injury.
Remedy
Ford will provide owners with instructions to perform a preliminary inspection of their front seat belts. Owners that detect an issue with the driver's seat belt, are unsure of the results, or do not want to perform an inspection, should not drive their vehicles and contact a Ford dealership. Dealers will inspect the front row outboard seat belts and replace them, if necessary, free of charge. Interim owner notification letters were mailed on November 5, 2021. Owner notification letters were mailed December 22, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C25.
Ford Motor Company (Ford) is recalling certain 2019 Ranger vehicles previously repaired under recall 19V-726. The service replacement Heating, Ventilating and Air Conditioning (HVAC) blower motor that was installed may have an improper clearance between an electrical terminal and the conductive base plate that may result in an resistive electrical short.
Risk and remedy
Risk
A resistive electrical short increases the risk of a fire.
Remedy
Ford will notify owners, and dealers will inspect and replace the HVAC blower motor, as necessary, free of charge. The recall began April 6, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S12.
Ford Motor Company (Ford) is recalling certain 2019 Ranger trucks. The inline electrical connector terminals for the rear lights may be misaligned or not properly seated, potentially causing the rear lights to function intermittently or not at all.
Risk and remedy
Risk
Intermittent or inoperative tail lamps can result in loss of stop, turn, rear position, and reverse lamp functions, which reduces the vehicle's visibility and may not fully alert other drivers that the vehicle is braking, turning, or reversing, increasing the risk of crash.
Remedy
Ford will notify owners, and dealers will inspect the inline connector for loose terminals and replace the connectors, if necessary, free of charge. The recall began March 5, 2020. A renotification was sent on July 10, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S43.
Ford Motor Company (Ford) is recalling certain 2019 Ranger vehicles. The Heating, Ventilating and Air Conditioning (HVAC) blower motor may electrically short.
Risk and remedy
Risk
An electrical short can increase the risk of a fire.
Remedy
Ford will notify owners, and dealers will inspect the HVAC blower motor production date, replacing it as necessary, free of charge. The recall began December 4, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S34.
Ford Motor Company (Ford) is recalling certain 2019 Ford Ranger vehicles with a SuperCab body style. The front passenger seat belt may have been improperly assembled.
Risk and remedy
Risk
Improperly assembled seat belts may not adequately restrain occupants in a crash, increasing their risk of injury.
Remedy
Ford will notify owners, and dealers will inspect and, if necessary, replace the right front seat belt assembly, free of charge. The recall began July 29, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S23.
Ford Motor Company (Ford) is recalling certain 2019 Ranger vehicles. The fasteners that attach the transmission shifter cable bracket to the transmission may loosen allowing the transmission to be in a different gear than indicated by the gear shift lever position.
Risk and remedy
Risk
If the gear shift lever position does not match the actual transmission gear, the vehicle may move in an unexpected direction. Additionally, despite selecting 'Park', if the parking brake is not applied before the vehicle is exited, the vehicle may roll. Either scenario increases the risk of crash or injury.
Remedy
Ford will notify owners, and dealers will inspect and tighten the transmission shift cable bracket fasteners as necessary, and verify the proper transmission shift operation, free of charge. The recall began July 1, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S15.
Ford Motor Company (Ford) is recalling certain 2019 Ranger vehicles equipped with 10-speed automatic transmissions. In some of these vehicles, the transmission shift lever can be moved from the "Park" position without the key in the starting system and without depressing the brake pedal. As a result, these vehicles fail to comply with Federal Motor…
Risk and remedy
Risk
If the vehicle can be shifted out of Park without the brake applied, the vehicle may unexpectedly move. Unintentional vehicle movement can increase the risk of injury or crash.
Remedy
Ford has notified owners, and dealers will inspect and repair the transmission floor shift selector interlock assembly, as necessary, free of charge. The recall began February 22, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19C02.
Owner complaints
271 complaints13 involved a crash2 involved a fire6 injuries
What owners report most
Latest complaints
- Suspension
My back leaf spring is completely broken from the bolt. This is abnormal and not acceptable , causing dangerous driving conditions. Other similar incidents are reported on online forums.
- Suspension
While operating my 2019 Ford Ranger under completely normal driving conditions without a heavy payload or trailer, the rear driver-side suspension suffered an instantaneous, catastrophic structural failure. The vehicle emitted a sudden, loud metallic clanking sound as the rear main mono-leaf spring…
While operating my 2019 Ford Ranger under completely normal driving conditions without a heavy payload or trailer, the rear driver-side suspension suffered an instantaneous, catastrophic structural failure. The vehicle emitted a sudden, loud metallic clanking sound as the rear main mono-leaf spring completely sheared in half directly in front of the axle mount assembly. The vehicle instantly lost two inches of ride height, bottoming out heavily onto the rubber axle bump stops and leaving only five inches of total clearance. A physical inspection of the broken component shows a uniform, bright, raw crystalline fracture face across the entire thickness of the steel leaf plate, with absolutely zero internal rust or environmental corrosion inside the metal grain. This physical evidence proves the structural component did not fail due to age or progressive wear, but rather suffered an instantaneous fatigue fracture due to a manufacturing metallurgical defect.
- Electrical system
Rear Camera - Back Over Prevention - I took it to the dealer, they said there is no recall for my vehicle. It is currently available for inspection but I will need to get it fixed. Safety risk is elevated due to inability to fully see surroundings/people/children/pets, etc. behind the vehicle.…
Rear Camera - Back Over Prevention - I took it to the dealer, they said there is no recall for my vehicle. It is currently available for inspection but I will need to get it fixed. Safety risk is elevated due to inability to fully see surroundings/people/children/pets, etc. behind the vehicle. The dealer saw that it is not working but I did not pay them to diagnose or inspect so they did not. There were no warning lamps, messages or other symptoms prior to the failure. The first appearance was today, 10/7/2026 while at the dealer for an oil change.
- Visibility/wiper
Defective heat/ac blend box assembly. No heat or, more importantly, windshield defroster. Appears to be a common issue on this vehicle model.
- Suspension
Driver side rear leaf spring cracked at front mount. This happened with low mileage 20k and no towing or off-road driving. In town driving only.
- Power train
My 2019 Ford Ranger with 10 speed transmission has been harsh shifting and will not always find the right gears. It will sometimes Surge forward or at other time not respond to acceleration. It has 100,000 miles. Never used it for towing or hawling heavy items.
- Power train
My 2019 Ford Ranger, VIN 1FTER4FH2KLA63893, experienced a major transmission failure at approximately 35,000 miles. I took the vehicle to a Ford dealership for diagnosis and was advised that the transmission required major repair/replacement, with an estimated cost approaching $9,000. I also…
My 2019 Ford Ranger, VIN 1FTER4FH2KLA63893, experienced a major transmission failure at approximately 35,000 miles. I took the vehicle to a Ford dealership for diagnosis and was advised that the transmission required major repair/replacement, with an estimated cost approaching $9,000. I also obtained an independent transmission repair estimate of approximately $6,700–$7,000. Given the extremely low mileage and the repair cost relative to the vehicle’s value, repairing the truck no longer made financial sense. The transmission failure substantially reduced its trade value and is forcing me to replace a vehicle that I otherwise intended to keep. I estimate the resulting loss of equity at approximately $7,000, in addition to the financial impact of prematurely taking on another vehicle and associated financing. After the failure, I learned of ongoing litigation involving Ford’s 10R80 10-speed transmission, including allegations involving 2019 and 2020 Ford Rangers. I am reporting my experience so this failure is formally documented and can be considered in connection with any investigation, litigation, warranty extension, recall, or other potential remedy involving the 10R80 transmission.
- Electrical system · Engine · Unknown or other
The cooling fan clutch control wire is supported by a "wire support hose" between the engine block and the fan clutch. the cooling fan clutch control freely rotates on a raceway on the drive shaft. The purpose of the support hose is to prevent the fan clutch control from freely rotating, but…
The cooling fan clutch control wire is supported by a "wire support hose" between the engine block and the fan clutch. the cooling fan clutch control freely rotates on a raceway on the drive shaft. The purpose of the support hose is to prevent the fan clutch control from freely rotating, but allows the control a limited range of movement as the drive shaft changes speed with engine RPM. The idea is that this hose prevents undue stress on the control wire. Hose is normally a consumable part that may need replaced with age, heat, etc. The hose is not sold as a replacement part and can only be obtained by purchasing a new fan clutch. When the hose fails, the control wraps around the drive shaft causing damage to the fan clutch control and wiring requiring replacement. The circuit on which the fan clutch control sits is integrated with no less than 6 other critical vehicle systems including oil pressure. When the incident occurs, all these systems generate errors that put the vehicle into limp mode until repair can be made. The fan clutch control wiring support hose should be a bracket with a different mechanical linkage solution to support wire while allowing the necessary limited movement. This low-tech hose solution causes outsized damage when it fails, effectively disabling the vehicle which creates a safety concern and undue hardship from an unnecessarily cascading damage effect. Ford acknowledges this defect by redesigning this feature for 6G Rangers but will not proactively correct through manufacturer recall 5G Rangers. If Ford will not correct, I believe the NHTSA should get involved and force Ford's hand at addressing this repair.
- Power train
Auto transmission is failing to shift when taking off from a stop or hesitating to shift to next year causing traffic behind me to get close to rear bumper.
- Power train
1st I reported to Ford that when my truck was in park and off, it started rolling down a hill. I jumped in and stopped it. Ford said they see nothing and everything looks fine. Since then I use the emergency break every time. 2nd, you feel the transmission shifting hard. Jerks truck. Also, if you drive around 25 mph, the truck starts jerking like it cant make up its mind what gear to be in.
- Suspension
Weak steel from connection point of rear leaf springs failed, leaving the springs unconnected at front eye of connection point
- Electrical system · Engine
I was driving the vehicle, when I started to fell a " Shuddering " sensation on acceleration. I let off the gas pedal and the Shuddering went away. A few miles down the road the check engine light came on and was flashing. I immediately pulled and shut the vehicle off. After sitting for 10 minutes…
I was driving the vehicle, when I started to fell a " Shuddering " sensation on acceleration. I let off the gas pedal and the Shuddering went away. A few miles down the road the check engine light came on and was flashing. I immediately pulled and shut the vehicle off. After sitting for 10 minutes I restarted the vehicle and the check engine light was no longer on, but the " Shuddering " sensation was still present. I took it to Dupratt Ford in Auburn,Ca. and they diagnosed it as a Cylinder 1 mis-fire. Upon further inspection they found water in the Cylinder 1 spark plug well. After doing some research I found out the Ford issued TSB 23-2011for this exact issue, but did not order a recall to fix the faulty windshield cowl which is the problem. I found thousands of complaints and numerous Ranger owners who have had the exact same issue and had to pay out of pocket to get the issue and damaged fixed. Meanwhile Ford knew about the issue and did absolutely nothing, did not even alert the owners of the issue. I was lucky and did not have to replace the cylinder head, but others have not been so lucky. I had to pay over $1800 to have the mis-fire issue fixed and had to do my own preventative measures to seal the windshield cowl. I contacted Ford and they were only willing to reimburse me $725 dollars of my repair bill which was 100% their fault.
- Power train
The Ford 10R60 and 10R80 transmission has become a hazard on the road. Please see TSB 23-2250. My Ranger only has 43,000 miles on it and is dangerous to drive because of the stuttering and lunging of the transmission. Ford is perfectly aware of this situation but won't fix vehicles that are out of…
The Ford 10R60 and 10R80 transmission has become a hazard on the road. Please see TSB 23-2250. My Ranger only has 43,000 miles on it and is dangerous to drive because of the stuttering and lunging of the transmission. Ford is perfectly aware of this situation but won't fix vehicles that are out of the 5 year warranty at no cost to the owner. No transmission should be faulty after only 43,000 miles. I am requesting that you please investigate this situation as I believe it should be a recall. - Thank you, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Power train
The transmission has issues not shifting gears and having loss of power when pulling out into intersections that are getting worse with time.
- Suspension
I am submitting this complaint regarding my 2019 Ford Ranger because I discovered what I believe to be a serious safety defect involving the rear leaf spring mounting system. My vehicle has approximately 55,000 miles and has been used primarily as a commuter vehicle for driving to and from work in…
I am submitting this complaint regarding my 2019 Ford Ranger because I discovered what I believe to be a serious safety defect involving the rear leaf spring mounting system. My vehicle has approximately 55,000 miles and has been used primarily as a commuter vehicle for driving to and from work in the city. The truck is originally from Virginia and has very minimal rust exposure. While replacing my rear brake pads, I noticed that the area where the rear leaf spring connects to the body/frame of the truck had broken away and was no longer properly attached. This was completely unexpected. A critical suspension component such as the leaf spring mounting point should not fail on a relatively low-mileage vehicle with only 55,000 miles, especially one that has not been subjected to severe corrosion or extreme use. Had I not been performing brake maintenance myself, I likely would not have discovered this defect. I fear that many other Ford Ranger owners may be driving their vehicles unaware that they could be experiencing the same dangerous condition. A failure involving the leaf spring mounting system has the potential to affect vehicle stability, handling, braking, and overall control. This creates a significant safety risk not only for the driver and passengers of the affected vehicle, but also for everyone sharing the roadway. I respectfully urge your agency to investigate this issue and determine whether a broader defect exists involving the rear leaf spring mounting components on 2019 Ford Rangers. If warranted, I ask that Ford be required to issue a recall to inspect and repair affected vehicles before a catastrophic failure results in serious injury or loss of life. Thank you for your attention to this matter and for your efforts to protect the safety of the driving public.
- Power train
Hash Shifting and at times kicks into gear hard at a stop light nearly hitting vehicle in front of me
- Tires › Tread/belt
The contact owns a 2019 Ford Ranger equipped with Dunlop Tires. Tire Line: AT2O, Tire Size : 265/65R17 110HI, DOT number DAAH D31R. The contact stated that while driving 65 MPH, the passenger-side rear tire blew out. The thread separated and was on the roadway. The contact was able to continue to…
The contact owns a 2019 Ford Ranger equipped with Dunlop Tires. Tire Line: AT2O, Tire Size : 265/65R17 110HI, DOT number DAAH D31R. The contact stated that while driving 65 MPH, the passenger-side rear tire blew out. The thread separated and was on the roadway. The contact was able to continue to drive. The contact called a tire center, but they failed to respond. The local dealer was not contacted. The manufacturer was not contacted. The tire mileage was unknown. The failure mileage was approximately 97,000.
- Power train
My 2019 Ford Ranger is equipped with the 10R80 10-speed automatic transmission that experiences hard/erratic shifting (as if it can't decide what gear it wants to be in), jerking/lunging especially in 1-2 gear when making a brief stop-and-go (stop sign or a crosswalk). The first couple time it happened, it felt like I got rearended or hit a curb.
- Engine · Service brakes
The brakes failed within hours of owning the Certified, WARRANTIED VEHICLE. ALMOST had an accident. Within <5 weeks of owning this warrantied certified vehicle, was stranded on Rine Ridge Indian Reservation and on the highway. Engine jerk so bad feels like I a derby car. Then just stalls. The dont…
The brakes failed within hours of owning the Certified, WARRANTIED VEHICLE. ALMOST had an accident. Within <5 weeks of owning this warrantied certified vehicle, was stranded on Rine Ridge Indian Reservation and on the highway. Engine jerk so bad feels like I a derby car. Then just stalls. The dont comply with their own 172 point certified inspection. They claim two keys for specified vehicle. They gave me two 1 starts the vehicle the other errors no key in ignition when you insert into ignition. NOW I have to pay bills to get a warrantied certified vehicle repaired plus loaner car because Ford McKie k owing sold an Unsafe vehicle under deceptive pretense. Multiple engine and brake failures which was supposedly certified inspected.
- Power train
Mileage is at 86980. I have been having issues for a good 10k miles that are slowly getting worse. Transmission is slamming into reverse from park. Shifting is slow from 1st to 2nd gear. Has begun revving engine but not engaging. I have had the transmission fluid changed 3x and flushed and changed…
Mileage is at 86980. I have been having issues for a good 10k miles that are slowly getting worse. Transmission is slamming into reverse from park. Shifting is slow from 1st to 2nd gear. Has begun revving engine but not engaging. I have had the transmission fluid changed 3x and flushed and changed the last time. No leakage or overheating. I do not drive her hard, off road or tow. She always gets warmed up before driving. My mechanic believes it is the PCM.
- Suspension
Rear rear leaf spring broken/cracked completely and disconnected from vehicle. The vehicle was unsafe to drive as the axle was not not connected to the vehicle on one side. The defective component was inspected by Firestone Auto and submitted and approved by SilverRock automotive for warranty…
Rear rear leaf spring broken/cracked completely and disconnected from vehicle. The vehicle was unsafe to drive as the axle was not not connected to the vehicle on one side. The defective component was inspected by Firestone Auto and submitted and approved by SilverRock automotive for warranty replacement and is currently at a Ford Dealership completing repairs because Firestone Auto failed to complete the repair properly. There were no warning lamps or messages and it the problem was only noticeable when the vehicle was on a lift or floor jack. The incident is unknown and it the broken part was poor design/materials.
- Suspension
July 2024 the right side back leaf spring was broken. was replaced under warranty. april 2026 the left side back leaf spring IS broke. waiting to hear from ford if it will be covered or not. leaf springs should not be breaking. I do not haul things or even go off road with my 2019 ranger. it has 74012.10 miles on it now.
- Power train
The contact owns a 2019 Ford Ranger. The contact stated that while driving at an undisclosed speed, the vehicle hesitated, and the transmission was shifting hard. Additionally, the vehicle vibrated abnormally while shifting from 1st to 3rd gear. The vehicle was taken to the dealer, where the TCM…
The contact owns a 2019 Ford Ranger. The contact stated that while driving at an undisclosed speed, the vehicle hesitated, and the transmission was shifting hard. Additionally, the vehicle vibrated abnormally while shifting from 1st to 3rd gear. The vehicle was taken to the dealer, where the TCM was reprogrammed, and various fluids were replaced; however, the failure persisted. The manufacturer was notified of the failure. The approximate failure mileage was 951.
- Electrical system · Engine · Suspension
On friday, march 27th, 2026. My 2019 ford ranger began shaking before the engine stalled. Warning lights for an engine check came on and my vehicle would not go above 20 mph after restarting. When pressing on the accelerator the engine would rev but the vehicle would not accelerate. I took the 2019…
On friday, march 27th, 2026. My 2019 ford ranger began shaking before the engine stalled. Warning lights for an engine check came on and my vehicle would not go above 20 mph after restarting. When pressing on the accelerator the engine would rev but the vehicle would not accelerate. I took the 2019 ford Ranger to a local Ford Dealership service center and they diagnosed the following problems (listed in full below).The cooling fan was at issue and multiple wires connecting my engine to the rest of the vehicle were melted off. The ford dealership said that this issue is extremely rare and they have never seen it before. After receiving this information from the dealership I discovered that the 2019 ford ranger has had several recalls with the areas at issue in my vehicle. The recalls are under number 25V685000 (Engine block heater), and 20V137000 (Fan). Here is the full diagnosis from the ford dealership attached below: VERIFIED CUSTOMER CONCERN FOUND VEHICLE TO HAVE CEL LIGHT ON, AND MULTIPLE WARNING LIGHTS PERFORMED DIAG AND FOUND SHORT CIRCUIT PRESENT. TRACED SHORT FOUND COOLING FAN CLUTCH FAILED AND HARNESS RUBBING IN CLUCH ASSEMBLY FOR COOLING FAN The fan lowers the temperature of the engine. The cooling fan motor is an electric motor that turns the fan blades. When the vehicle is in traffic or under heavy load, the engine relies on the fan to cool itself. Some vehicles may use multiple electric fans for better control of the cooling system. For the most part, electric cooling fans are controlled by the same computer that controls the engine. However, in some engines, the fans are turned on and off by a temperature-sensitive switch mounted in either the radiator or elsewhere in the cooling system. Spark Plug Replacement 4 Cylinder: 4 Cyl Tune Up The platinum spark plug is a type of spark plug. The platinum is a precious metal that is used in the composition of the spark plug. The center electrode is made of platinum.
- Air bags · Electrical system · Seat belts
Restraints indicator lamp warning. Air bag warning is on due to a problem with the front passenger side airbag. The front passenger airbag may not function.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 11006862Some 2019-2024 Ford and Lincoln vehicles equipped with a telematics control unit module (TCU) may exhibit the Location toggle button in the Connectivity setting menu grayed out with an inability to switch it off.
- 11006036Certain 2018 - 2024 Model Year Various Vehicles Update SYNC Software In all the affected vehicles, due to an error in the SYNC software, you may experience SYNC system instability concerns and/or a failure to preserve certain settings across ignition cycles. This may result in a black infotainment screen that does not affect rear view camera, incorrect language setting, erased or unsaved radio presets, and potential inability to perform software updates.
- 11005746Some 2019-2024 Ford and Lincoln vehicles equipped with SYNC3 may experience various FordPass/LincolnWay connectivity concerns including but not limited to: missing activation prompt (pop-up) on the vehicle's center display screen when attempting to activate vehicle through FordPass/LincolnWay, incorrect location/global positioning system (GPS) reported through FordPass/LincolnWay, problems with remote commands being performed through FordPass/LincolnWay, incorrect data/information reported on FordPass/LincolnWay. These symptoms will be accompanied by diagnostic trouble code (DTC) B156D:89 in the TCU. This may be due the accessory protocol interface module (APIM) software
- 11005710Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System (FDRS) or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level NU5T-14G381-AB/BB. The current software level can be verified in the SYNC tab of Professional Technician System (PTS) or using the vehicle's center display screen, Settings > General > About. To correct the condition, run the universal USB updater. If unsuccessful, using the latest software version of the FDRS scan tool, run the service function "APIM - Reset the Accessory Protocol Interface Module Application" and select "Clear All User Data" option. The center display screen will reboot. As soon as the vehicle's center display screen displays the boot up logo, immediately reinsert the same universal serial bus (USB) drive that was utilized during the prior failed programming attempt.
- 11003146Some 2019-2024 vehicles equipped with SYNC 3 may experience a programming Error - "INSTL_ERR12" while programming APIM using the Ford Diagnosis and Repair System, or experience a frozen screen which says "updating system software" or no progress/response from module using the universal USB updater. This may be due to low memory in the APIM commonly occurring on software level
- 11001646This article supersedes TSB 23-2307 to update the Service Procedure and vehicle model years affected. Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Transit Connect, 2019-2023 Mustang, 2019-2023 Ranger, 2020-2021 Expedition/Navigator, 2020-2022 Escape/Corsair/Super Duty/EcoSport, 2020-2024 Explorer/Aviator/Transit, 2021-2024 Bronco Sport, 2022-2024 Maverick vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update theaccesory protocol interface module (APIM) software.
- 11000297Various vehicles equiped with 10R80/10R80 MHT/10R100/10R140 transmissions may require replacement of the seal kits (7153) when internal repairs are being performed. These kits come with 4 wheel drive (4WD) seals and will no longer include the 2WD seals. When working on a 2WD vehicle, any 2WD seals must be ordered separately. Refer to the parts catalog for the proper 2WD seals required.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10253552Various vehicles have had pinpoint tests, guided routines and the Warranty and Policy Manual recentlyupdated for diagnostics and repairs on SYNC generation 3 and later applications. When performingdiagnostics and repairs on SYNC Gen 3 or later, select the diagnostics tab and search for related symptoms,DTCs and keywords. The search results will be shown in the search results pane. Read and follow allTechnical Service Bulletins (TSB), Special Service Message (SSM)s or General Service Bulletin (GSB) first if abulletin specifically addresses the vehicle concern. If there are no messages, run the appropriate diagnosticpinpoint test found in the Workshop Manual (WSM). Follow the steps in the pinpoint test. Make sure to note thetitle of the guided routine, using the correct one for the vehicle's symptom or diagnostic trouble code (DTC) iscritical. Depending on the outcome of the pinpoint test, a repair validation code (RVC) may be generated eitherin the pinpoint test or Guided Routine. If the vehicle concern still exists after following the pinpoint tests orguided routine, then a manual RVC can be generated using the RVC Assist Form. A manual RVC can only begenerated once the above process has been followed.
- 10252674This article supersedes TSB 24-2046 to update the Service Procedure LTIS statement. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) that are stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10251952For 2015-2024 Ford and Lincoln vehicles equipped with turbocharged engines and customer concern of an engine oil leak, refer to Workshop Manual (WSM), Section 303-00 for oil leak inspection and testing methods. Ford has evaluated turbochargers replaced for oil leak symptoms and although oil may collect on the external surface of a turbocharger, it is extremely rare for a turbocharger assembly to be the root cause of the oil leak. Careful inspection of the turbocharger oil feed and drain tubes should be performed along with the recommended WSM procedures as needed. Warranty claims for turbocharger replacement going forward will be assessed.
- 10251469This article supersedes TSB 23-2350 to update the Issue statement and the Service Procedure. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10245418Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang, 2019-2023 Ranger vehicles equipped with a 10R80 transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10244707Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the SYNC module (APIM) software.
- 10243648Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability. Use the Report a Vehicle Concern link at the bottom of OASIS to submit a report if there is a customer concern of whine noise describing operating conditions and noise severity.
- 10241627In various 2017-2023 Ford and Lincoln vehicles, customers may receive a message in the FordPass or LincolnWay App stating Feature Unavailable. Since this is a fleet vehicle, it cannot access the (SYNC Connect) FordPass or LincolnWay app through the TCU Embedded Modem. If this message appears, the vehicle may be equipped with a fleet telematics module. Replacement of the TCU or TCU related repairs will not prevent this message from appearing. Refer the customer to in app FordPass Guides or LincolnWay Concierge Teams to aid with fleet telematics removal. Open app, select Account > Help > CHAT or CALL option.
- 10241524Some 2019-2023 Ranger (non-Tremor) vehicles may exhibit a shudder/vibration when accelerating. This may be due to an excessive rear axle pinion angle (rear wheel drive (RWD) vehicles) or the pinion and driveshaft assemblies (four-wheel drive (4WD) non-Tremor vehicles). To correct the condition, follow the Service Procedure steps to adjust the rear axle pinion angle on 4x2 vehicles or replace the rear axle pinion and driveshaft on 4x4 non-Tremor vehicles.
- 10241447This article supersedes TSB 22-2428 and 23-2176 to update the Issue, Action and Service Procedure. Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60/10R80/10R80MHT transmission may exhibit a harsh/delayed engagement and/or harsh/delayed shift, an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the powertrain control module (PCM) or transmission control module (TCM), the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve. To correct the condition, follow the Service Procedure to identify and correct the condition.
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10237786TSB 22-2428 is missing some labor operations. For any missing labor operations, claim available new model labor operations or m-time. Refer to this article on the repair order. When replacing the CDF cylinder, the current TSB does not require a complete transmission overhaul or cooler and converter flushing. Ford is currently reviewing the TSB. Monitor OASIS for updates.
- 10236683This article supersedes TSB 23-2123 to update the Issue statement. Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2023 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the keep alive memory in the PCM/TCM or the transmission main control valve body. To correct the condition, follow the Service Procedure to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
- 10236680Some 2017-2023 F-150, 2018-2023 Expedition/Navigator/Mustang, 2019-2023 Ranger, 2020-2023 Explorer/Aviator/Transit and 2021-2023 Bronco vehicles equipped with a 10R60 transmission and built on or before 23-Dec-2022 or with a 18R80/10R80MHT transmission and built on or before 15-Aug-2022 may exhibit a harsh/delayed engagement and/or harsh/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to the software in the PCM or TCM, the transmission solenoid ID strategy, sticking valves in the main control valve body and/or axial movement of the CDF clutch cylinder (7H351) sleeve.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10234596Some 2017-2020 F-150, 2018-2021 Expedition/Navigator/Mustang and 2019-2023 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit a harsh engagement/harsh shift/delayed shift. It is possible the vehicle may also have an illuminated malfunction indicator lamp (MIL) or diagnostic trouble codes (DTC) P0751, P0752, P0756, P0757, P0761, P0762, P0766, P0767, P0771, P0772, P2700, P2701, P2702, P2703, P2704, P2705, P2707, P2708, P0729, P0731, P0732, P0733, P0734, P0735, P0736, P076F, P07D9, P07F6 and/or P07F7 stored in the powertrain control module (PCM) or transmission control module (TCM). This may be due to incompatibility of the adaptive calibration to adapt to hardware break-in over time. To correct the condition, follow the Service Procedure steps to overhaul the main control valve body and/or perform an adaptive learning drive cycle.
- 10233695Some 2017-2023 Ford and Lincoln vehicles equipped with a 10R60/10R80/10R80 MHT/10R100 transmission may exhibit a whine noise at idle and/or while driving. This may be identified as coming from the bellhousing and the front of the transmission fluid pan. The whine noise may become louder when the transmission is at operating temperature and may increase with engine revolutions per minute (RPM) in the park (P) position. A small amount of whine noise is considered to be characteristic of the 10R60/10R80/10R80 MHT/10R100 transmissions due to the offset gear drivetrain in the front support and has no effect on durability.
- 10233590Some 2019-2023 Ranger vehicles may exhibit a shudder/vibration when accelerating from a stop. This may be due to an excessive rear axle pinion angle. To correct the condition, follow the Service Procedure steps to adjust the rear axle pinion angle.
- 10233585Some 2019-2023 Ranger crew cab vehicles may exhibit excessive latching effort when returning the rear seat backrest assembly to the upright position. This may be due to oversized rear seat backrest bumpers preventing latch to striker engagement. Vehicles built on or before 04-Feb-2019 may also have excessive deadening material inside the rear seat backrest latch. To correct this condition, follow the Service Procedure to replace the rear seat backrest bumpers and adjust the striker position.
- 10232389Some 2019 Ranger vehicles equipped with an 8 in. center display screen may have had the climate control buttons no longer present on the center display screen after accessory protocol interface module (APIM) replacement or dealer software update, although the mechanical buttons for climate are still functional. To correct this condition, perform the APIM configuration programming feature in FDRS. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
- 10230940Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue with the blend door and its controls. To avoid repeat repairs, replace the air distribution housing/heater assembly (service base part# 18478). Refer to Workshop Manual (WSM), Section 412-00. Do not replace the evaporator core for this condition. The WSM has been updated to reflect this change. For claiming use causal part 18478 and use applicable labor operations in Section 11 of the Service Labor Time Standards (SLTS) Manual.
- 10230773Some 2019-2022 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To correct the condition, follow the Service Procedure to resolve the source of all DTCs and to install an engine appearance cover.
- 10228880Some 2015-2023 F-150, 2017-2022 F-Super Duty, and 2019-2023 Ranger vehicles may exhibit dust ingress into the cabin through the doors or air extractors. This may be due to the climate control system being in recirculation mode as a result of the recirculation button being on or automatic strategies for heating/cooling efficiency. To minimize dust ingress when driving in off-road or secondary road conditions, make sure that all doors and windows are fully closed and the climate control system is switched to defrost on and the instrument panel and footwell air vents are switched to off. Temperature and fan settings may be adjusted as desired. Alternatively, max defrost can be activated which will adjust all settings automatically. Operating in defrost mode will keep constant air flow through the rear air extractors and other small areas, helping minimize dust ingress.
- 10228855Some 2019-2022 Ranger vehicles not equipped with an engine appearance cover may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To prevent reoccurrence, an engine appearance cover must be installed on the vehicle. Currently, the engine cover (SPN: L1MZ-6A949-A) is not available to order and a new engine cover kit is being released. Repair the vehicle by replacing suspect ignition system components and schedule an appointment with the customer to have an engine cover installed when the engine cover kit becomes available in April 2023. Monitor OASIS for updates
- 10220379Some 2018-2021 Expedition/Navigator, 2018-2020 F-150/Mustang and 2019-2021 Ranger vehicles equipped with a 10R80 automatic transmission may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P163E stored in the powertrain control module (PCM) or transmission control module (TCM) after replacing the main control valve body. This may be due to software incompatibility between the replacement main control valve body solenoid strategy file and the PCM/TCM software. To correct this condition, follow the Service Procedure to enter only the 13-digit solenoid body strategy when downloading transmission strategy.
- 10218921Some 2019-2022 Ranger vehicles (equipped without an engine appearance cover) may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0300, P0301, P0302, P0303, P0304 and/or P0316 stored in the powertrain control module (PCM). This may be due to water build up in the spark plug well(s) which can lead to signs of corrosion on ignition system components. To prevent reoccurrence, an engine appearance cover must be installed on the vehicle. Currently, the engine cover (SPN: L1MZ-6A949-A) is not available to order and a new engine cover kit is being released. Repair the vehicle by replacing suspect ignition system components and schedule an appointment with the customer to have an engine cover installed when the engine cover kit becomes available in November 2022. Monitor OASIS for updates
- 10217028Some 2017-2022 Ford/Lincoln customers may experience a notification in the FordPass/LincolnWay app indicating Vehicle Has Entered Deep Sleep Mode. This occurs when the vehicle has not been started for 14 consecutive days, battery voltage is at/below 9.5 volts or the body control module (BCM) 12 volt battery state of charge (SOC) drops below 50%. A warning may also set if the telematic control unit (TCU) has received an over the air update. The TCU powers down all communication when in this mode and app features are disabled. Manually start the vehicle to wake if from mode. More information is located in the app under: Account > Help > search 'Deep Sleep' in the entry box. If the condition remains, check the BCM 12v SOC. If the SOC does not change after charging the battery or after BMS reset is performed, continue with normal battery and/or BMS sensor diagnostics.
- 10214878Some 2019-2020 Edge/F-150/Fusion/Continental/MKZ/Nautilus, 2019-2021 Mustang/Ranger/Transit Connect, 2020-2021 EcoSport/Escape/Expedition/Explorer/F-Super Duty/Aviator/Corsair/Navigator, 2021 Bronco Sport and 2020-2022 Explorer/Aviator vehicles with SYNC 3 may experience various SYNC performance related concerns. This may be due to the SYNC Software. To correct the condition, follow the Service Procedure to update the accessory protocol interface module (APIM) software.
- 10214871This article supersedes TSB 21-2021 to update the part list Some 2019-2020 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0420 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and replace the catalytic converter.
- 10214832Some 2017-2022 Ford and Lincoln vehicle owners may experience a condition of missing authorization, command and control, battery charging details or phone-as-a-key setup buttons/selections in their FordPass or LincolnWay App. This condition is due to an error within the FordPass or LincolnWay App and not due to a concern on the vehicle. Verify that the customers FordPass or LincolnWay App is at the latest version. Replacement or reprogramming of the telematics control unit (TCU)/gateway module (GWM)/remote function actuator (RFA) will not resolve this condition. If the condition persists, utilize the FordPass Guides or Lincoln Way Concierge teams.
- 10214494Some 2019-2022 Ranger vehicles may encounter a concern of FordPass not updating the current vehicle location and/or a battery draw is found to be from either the audio control module (ACM) or gateway module (GWM). This may be due to the software in the GWM. To correct this condition, reprogram the GWM using the latest software level of Ford Diagnosis and Repair System (FDRS). For claiming use causal part 14F642 and the applicable labor operations of Section 10 of the Service Labor Time Standards (SLTS) Manual.
Every Ford Ranger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.