2006 Honda CR-V
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Honda › CR-V › 2006
These records cover every 2006 Honda CR-V. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
13 recalls name the 2006 Honda CR-V. Newest first.
Honda (American Honda Motor Co.) is recalling certain 2002-2006 CR-V vehicles. Moisture may enter the driver side power window master switch, causing the switch to fail or melt.
Risk and remedy
Risk
If the switch fails, it could overheat and smoke, increasing the risk of a fire.
Remedy
Honda will notify owners, and dealers will replace the power window master switch and inspect the wiring harness for damage, replacing it if necessary, free of charge. The recall began January 29, 2021. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is P9D.
Dorman Products, Inc. (Dorman) is recalling certain Accelerator Pedal Assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 Acura MDX, 2004-2008 Acura TL and TSX, 2003-2007 Honda Accord, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot and 2006-2014 Honda Ridgeline vehicles. The rotating portion of the…
Risk and remedy
Risk
If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
Remedy
Dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began December 9, 2019. Owners may contact Dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is AS1019XXXX.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007…
Risk and remedy
Risk
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.) is recalling certain 2003-2012 Honda Accord and Pilot, 2010 Accord Crosstour, 2001-2011 Civic, 2002-2011 CR-V, 2003-2004, 2006-2008 and 2011 Element, 2007 and 2009-2013 Fit, 2010-2012 Insight, 2002-2004 Odyssey, and 2012 Ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
Risk and remedy
Risk
An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
Remedy
Honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began June 22, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are K1P, and M1O.
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.
Risk and remedy
Risk
If the switch fails, it could overheat, smoke, and cause a fire. A switch failure, and a fire, could occur even if the vehicle is not in use. As a precaution, owners are advised to park outside until the recall repair has been performed.
Remedy
Honda will notify owners, and dealers will inspect and repair the switches, as necessary, free of charge. The safety recall began on November 2, 2012. Owners may contact Honda at 1-800-999-1009.
Honda IS recalling certain model year 2006 CR-V vehicles. the weld strength attaching the sub-frame bushing collar to the passenger-side front lower arm IS insufficient. the collar can separate from the arm due to vibration while driving.
Risk and remedy
Risk
As a result, a loss of steering can occur, increasing the risk of crash.
Remedy
Honda will notify owners, and dealers will inspect the production lot stamp on the passenger-side front lower arm and, if necessary, replace the lower arm, free of charge. the safety recall IS expected to begin on or about april 17, 2012. owners may contact honda customer service at 1-800-999-1009.
Honda IS recalling certain model year 2006 CR-V passenger cars manufactured from october 3, 2005, through july 21, 2006. the driver-side power window switch may fail or melt.
Risk and remedy
Risk
If the switch fails, the power windows may become inoperative preventing them from being rolled up or down. if the switch melts, it will produce smoke and a fire could occur.
Remedy
Honda will notify owners, and dealers will replace the driver side power window switch assembly free of charge. the safety recall IS expected to begin on or about october 5, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
On certain passenger vehicles and motorcycles, the owner's manuals contain incorrect contact information for the national highway traffic safety administration's (nhtsa) vehicle safety hotline.
Risk and remedy
Risk
The language in the owner's manuals IS not in accordance with the current mandatory requirements.
Remedy
Honda will send a postcard to dealers and owners with the correct nhtsa vehicle safety hotline information and with instructions to insert the card into the "reporting safety defects" section of the owner's manual. the recall began on august 2, 2006. owners may contact honda at 1-800-999-1009, acura at 1-800-382-2238 or honda motorcycles at 1-866-784-1870.
Owner complaints
398 complaints27 involved a crash16 involved a fire22 injuries
What owners report most
Latest complaints
- Steering · Structure › Body · Suspension
Driver side rear trailing arm broke free of the frame. Resulted in sudden loss of control and near accident.
- Suspension
I purchased my vehicle used in 2019 and immediately noticed a loud creaking noise from the front passenger area, especially in colder weather when driving over bumps at low speeds. By 2024, the noise became louder, more frequent, and occurred in all temperatures. In October 2024, I lost control of…
I purchased my vehicle used in 2019 and immediately noticed a loud creaking noise from the front passenger area, especially in colder weather when driving over bumps at low speeds. By 2024, the noise became louder, more frequent, and occurred in all temperatures. In October 2024, I lost control of my vehicle and nearly flipped. Warning lights briefly appeared, indicating possible suspension issues, but they disappeared before I could diagnose the problem. Unfortunately, I had no choice but to continue driving despite the safety risk. In February 2025, I had a flat tire on the front passenger side and discovered it was nearly bald—far more worn than the other tires of the same age. Upon removal, it became clear that the front lower control arm was in a dangerously unnatural state and needed replacement. I recalled seeing a 2012 recall for this exact part in my Honda account, but when I entered my VIN, it stated the recall didn’t apply—likely due to age rather than the actual defect. This is a life-or-death issue that could easily lead to a fatal crash. Honda must address this immediately.
- Exterior lighting
The contact owns a 2006 Honda CR-V. The contact stated while driving approximately 40 MPH at night, the driver's side low beam headlight had failed to operate as needed. The contact stated that the high-beam headlights operated as needed; however, the driver's side low-beam headlight was…
The contact owns a 2006 Honda CR-V. The contact stated while driving approximately 40 MPH at night, the driver's side low beam headlight had failed to operate as needed. The contact stated that the high-beam headlights operated as needed; however, the driver's side low-beam headlight was inoperable. The contact stated that no warning light was illuminated. The contact had taken the vehicle to a local mechanic who replaced the driver's side headlight bulb. The vehicle was repaired; however, the failure reoccurred. The contact stated that the failure had become a recurring failure and had recently occurred to the passenger’s side low beam headlight. The contact researched online and became aware of similar failures with other vehicles. The contact had not taken the vehicle to a local dealer. The vehicle was not diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 200,000.
- Steering · Suspension
Unknown
- Structure › Body
Extensive undercarriage rust around the frame. It looks like it should’ve been included in the recalls but doesn’t say it is.
- Forward collision avoidance › Automatic emergency braking · Service brakes
Vehicle brakes come on spontaneously while driving, during acceleration in 1st, 2nd and 3rd gear. Seems to be a part of the ABS/VSA system faulty engagement (Anti-Lock Brakes System/Vehicle Stability Assist) since the VSA warning light come on during the fault. Causes vehicle to brake, jerk and…
Vehicle brakes come on spontaneously while driving, during acceleration in 1st, 2nd and 3rd gear. Seems to be a part of the ABS/VSA system faulty engagement (Anti-Lock Brakes System/Vehicle Stability Assist) since the VSA warning light come on during the fault. Causes vehicle to brake, jerk and buck in middle of road. Almost got rear-ended on several occasions. Car stalls in middle of roadway. Disfunctional safety system failing to work properly. Intermittent problem that has occurred several time in the past year. Local dealer was "not able" to diagnose the problem despite inspection and problem issue report.
- Suspension
The contact owns a 2006 Honda CR-V. The contact stated that while driving at an undisclosed speed and attempting to complete a right turn, he heard an abnormal popping sound coming from the front passenger’s side of the vehicle. The contact also stated that while driving over a bump, the vehicle…
The contact owns a 2006 Honda CR-V. The contact stated that while driving at an undisclosed speed and attempting to complete a right turn, he heard an abnormal popping sound coming from the front passenger’s side of the vehicle. The contact also stated that while driving over a bump, the vehicle briefly drifted to the right. No warning lights were illuminated. The vehicle was taken to an independent mechanic, who diagnosed a failure with the passenger’s side front lower control arm. The vehicle was not repaired. After investigating the failure, the contact related it to NHTSA Campaign Number: 12V124000 (Suspension), but the VIN was not included. The manufacturer was notified of the failure but referred the contact to the NHTSA hotline for assistance. The failure mileage was 178,000.
- Unknown or other
I have a 2006 Honda CRV with a little over 297,780 miles. Upon starting the car, the VSA and ABS indicator lights came on along with the VSA warning triangle and would not go off until the engine was turned off. There were no accidents or any noticeable problems with the vehicle while driving on…
I have a 2006 Honda CRV with a little over 297,780 miles. Upon starting the car, the VSA and ABS indicator lights came on along with the VSA warning triangle and would not go off until the engine was turned off. There were no accidents or any noticeable problems with the vehicle while driving on city street under good conditions. I feel that this defect is essential in ensuring the overall safety of this car. The weight of the car is significant enough that an uncontrolled skid is much more likely to end in disaster than a skid that is stopped with the VSA and ABS function working properly. I feel that Honda should recall these cars and replace the VSA modulator unit entirely at Honda's expense. And for those who have already paid for the repair - reimburse the full amount of the repair! Since this component controls brakes and stability it seems to me to be a safety issue and therefore subject to a recall.
- Structure › Body · Wheels
The rear passenger wheel assembly became detached after crossing a small depression in the road. The body/frame had rusted where the two bolts that attached to the wheel assembly. The entire frame and body has rusted underneath the car.
- Engine · Suspension
My transmission went out
- Suspension · Unknown or other
stabilizer bars broken Honda dealer reports frame is badly rusted
- Exterior lighting
wiring harness electrical
- Air bags
The contact owns a 2006 Honda CR-V. The contact received notification and post cards regarding Takata Air bags recall and would like to be removed from the recall distribution list. The local dealer and manufacturer were contacted.
- Unknown or other
Both cigarette outlets have stopped working causing long trips dangerous due to not being able to charge cellular phones
- Air bags › Side/window
Driver side window does not operate
- Service brakes
there was no accident yet!!!!The vsa and abs lights on my 2006 Cr-v came on upon starting and stayed on until the engine was stopped. This happened every time the car was started. the car ends up bucking on me. My Honda dealership diagnosed the problem to be a faulty abs modulator unit. The stated…
there was no accident yet!!!!The vsa and abs lights on my 2006 Cr-v came on upon starting and stayed on until the engine was stopped. This happened every time the car was started. the car ends up bucking on me. My Honda dealership diagnosed the problem to be a faulty abs modulator unit. The stated replacement cost is $2,400, including labor. I feel that this defect is essential in ensuring the overall safety of this car. The weight of the car is significant enough that an uncontrolled skid is much more likely to end in disaster than a skid that is stopped with the vsa and abs function working properly. Living in central PA, the abs and vsa functions are used frequently - especially in the winter. These key safety features were a top priority in my decision to buy this car. While the car's life expectancy is touted to be around 300,000 miles, it is unforgivable for such a significant safety function to fail at only 102,000 miles. I feel that Honda should recall these cars and replace the vsa modulator unit entirely at Honda's expense. And for those of us who have already paid for the repair - reimburse the full amount of the repair! the car without vsa and abs is not at all the same "as advertised" when sold new!.
- Electrical system · Unknown or other
The Vechile Stability Assist (VSA) light came on and took it too my Honda mechanic and confirmed that the Anti-lock Brake System(ABS) module needs to be replaced and this disabled the VSA. Parts+labor over $2,600+ to fix. Called the Manufacturer (Honda) and told me that I would have too first get…
The Vechile Stability Assist (VSA) light came on and took it too my Honda mechanic and confirmed that the Anti-lock Brake System(ABS) module needs to be replaced and this disabled the VSA. Parts+labor over $2,600+ to fix. Called the Manufacturer (Honda) and told me that I would have too first get it fixed and then submit the bill to them and they may reimburse me some of the cost or nothing. Since the ABS component controls brake and stability this a safety issue and therefore subject to a recall. I looked on the web and in the United Kingdom and Canada that Honda has paid in full. In the US, Honda doesn't consider it a defect and thus won't reimburse the owner's for fixing the vehicle. Once again because this an safety issue I believe that Honda should recall these vehicles and cost should be covered by Honda
- Electrical system
About 4 months ago I discovered that the electric operator on the front passenger window no longer worked. I recently had a mechanic try to repair it and he found that the motor worked well. He replaced the switches in both the passenger door and the driver's door but window only goes down and not…
About 4 months ago I discovered that the electric operator on the front passenger window no longer worked. I recently had a mechanic try to repair it and he found that the motor worked well. He replaced the switches in both the passenger door and the driver's door but window only goes down and not up. The mechanic checked online and discovered that this vehicle model was recalled in December, 2020, for this problem. When I checked on getting my vehicle repaired through the recall, I discovered that my specific vehicle was not included in the recall. Because I am now aware of the risk of fire, I request that my vehicle be included in the recall so I can have it repaired. Thanks for your consideration of this request.
- Latches/locks/linkages › Doors › Latch · Latches/locks/linkages › Trunk lid › Latch
The contact owns a 2006 Honda CR-V. The contact stated that the driver's door and trunk locks failed to operate as needed. There were no warning lights illuminated. The vehicle had not been diagnosed or repaired. The manufacturer had not been notified of the failure. The approximate failure mileage was 100,000.
- Electrical system
Driver side power window will not open. Dangerous because if I am pulled over I can not roll down my window to speak with police. I’ve also seen reports of electrical fires associated with this issue. The issue has not been inspected by 3rd parties.
- Electrical system · Exterior lighting
Every few months one of my low beam headlamps goes out, and I replace it to stay in compliance with local traffic laws. Within the last week, both low beam headlights went out, and both sockets show burn damage that is similar to the issue reported in NHTSA recall: 04V086000. I am concerned that…
Every few months one of my low beam headlamps goes out, and I replace it to stay in compliance with local traffic laws. Within the last week, both low beam headlights went out, and both sockets show burn damage that is similar to the issue reported in NHTSA recall: 04V086000. I am concerned that even if I replace both the lights and the sockets, there may be something else going on that could cause a fire. I'd like NHTSA to look into this please. Thank you
- Suspension
A sharp sound and thug
- Exterior lighting
Low-beam headlight bulb repeatedly fails in 2006 Honda CR-V, more often on the driver’s side, requiring replacement two to three times per year. This has occurred since the car was purchased in 2011 over ten years ago. Recall is needed for this common problem.
- Unknown or other
My car gets up to 2500 rpms and the check engine light comes on and the VSA warning light as well. The car jerks hard and the engine stutters and won't hardly go. it's done this to me twice and I had the ecu reset. The diagnostic comes up as the vsa system modulator. I have had my 6 and 9 year old…
My car gets up to 2500 rpms and the check engine light comes on and the VSA warning light as well. The car jerks hard and the engine stutters and won't hardly go. it's done this to me twice and I had the ecu reset. The diagnostic comes up as the vsa system modulator. I have had my 6 and 9 year old granddaughters in the car with me. If I had been on the interstate in heavy traffic taking them to their doctor appointments, we would have been killed. The third time this thing went out I had to pull into the shoulder of the road to avoid being hit. I believe Honda knows about this problem and they should be made to replace the part for free. This is a major safety hazard and the part runs almost $2000 without the labor. I believe they want to drag their feet and not recall this part because it's so expensive. I don't want to die in my car and I can't afford to buy another one. Thanks.
- Unknown or other
The transmission is making a loud noise (whining noise) and it could fail at any moment while I'm driving it. The car has 100,000 miles only.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Driver's Power Window Master Switch
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The…
This investigation was prompted by Preliminary Evaluation (PE) 10-047 and was based on reports from consumers alleging that smoke and/or fire, as defined in 49 CFR ? 579.4, had occurred inside of the driver's door.The subject vehicles, model year (MY) 2006 CR-V, were manufactured at two different assembly plants.The vehicles manufactured in Japan (Sayama plant) were produced with a power window master switch (PWMS) supplied by the Thai Toyo Denso Company, Ltd. (Denso).The vehicles manufactured in the United Kingdom (UK, Swindon, England plant) were produced with a PWMS supplied by the Omron Corporation (Omron).Honda provided 45 reports on the subject vehicles responsive to this investigation.Of this number, 24 reports concerned Japan-built vehicles, 19 reports on UK-built vehicles, and two reports without a vehicle identification number which could not be identified by assembly plant. Four of Honda's reports were duplicative of ODI reports.ODI received nine reports on the subject vehicles:five on Japan-built and four on UK-built vehicles, and one additional report on a MY 2005 UK built vehicle.The ODI reports can be reviewed at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification (ODI) numbers: 10343884, 10307287, 10321646, 10375324, 10386750, 10425406, 10437807, 10439880, 10469350, and 10406979.In most cases, it was reported that the PWMS and/or its electrical wiring harness had sustained heat related damage requiring replacement of the affected component(s).However, in three of the cases involving an Omron PWMS (UK built), a fire breached the driver's door panel and spread into the vehicle interior.Two of the three vehicles were determined to be a total loss by insurance companies, and one was repaired.All three fires occurred as the vehicles were parked with the ignition switch turned off.On September 6, 2011 Honda submitted a Defect Information Report (DIR) to recall 80,111 subject vehicles built in Japan.In it's DIR, Honda explained that the Denso PWMS assembly has switches made of a resin material that can allow residues to accumulate over time.Residue from silicone based cleaning products used near the PWMS can adhere to the electrical contacts of the switch and repeated operation of the switch may accelerate wear of the electrical contact.Silicone particles that have accumulated between the power source and the ground in the switch can become heated when electrical power is supplied to the circuit.If this occurs, the resin material of the switch can carbonize and form an electrically conductive path which causes the resin material to heat up.As a result, the switch may melt and produce smoke.In the worst case, the switch cover may burn.ODI notes that this recall was limited to MY 2006 because the PWMS subject to the recall (P/N 3750-S9A-C05ZA) was made of a new resin material introduced during MY 2006 production.ODI continued its investigation with respect to UK built vehicles with the Omron PMWS.On October 4, 2012 Honda submitted an additional DIR to recall 268,655 MY 2002-2006 CR-V vehicles.Honda's DIR stated that water or other fluids can enter the Omron PWMS assembly and over time cause electrical resistance in the switch.Increased resistance can result in overheating and melting of the switch, which could potentially cause a fire.Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recalls 11V456 and 12V486 for further details of the recalls.
- Driver's Master Power Window Switch
This investigation was opened based on three Vehicle Owner's Questionnaire reports alleging smoke and fire occurred inside of the driver's door.The complainants reported that the master power window switch and, in some cases its wiring harness, had sustained heat related damage and required replacement.Since opening…
This investigation was opened based on three Vehicle Owner's Questionnaire reports alleging smoke and fire occurred inside of the driver's door.The complainants reported that the master power window switch and, in some cases its wiring harness, had sustained heat related damage and required replacement.Since opening the investigation the Office of Defects Investigation (ODI) has received two additional reports.The reports provided by Honda in response to ODI's Information Request appear consistent with ODI's Vehicle Owner's Questionnaire reports. Based on the information provided by Honda in response to this preliminary evaluation and its ongoing analysis, the investigation will be upgraded to engineering analysis EA11-004 to further study the issue.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10226214Service Bulletin - REVISION SUMMARY - Under WARRANTY CLAIM INFORMATION, a note was added. BACKGROUND Under severe conditions, water or other liquid may enter the drivers window and reach the power window master switch on the door panel. Liquid in the switch can damage the switchs printed circuit board (PCB), causing the switch to fail. In rare cases, the damaged PCB creates a short circuit that overheats the switch connectors and melts them, leading to a possible fire. All affected vehicles, even those previously repaired under S/B 12-067, must have the driver's power window switch replaced under the current recall.
- 10213538Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10172568Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10172564Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only.
- 10142447Tech line summary article - Is the MIL on with DTC P2271 (secondary HO2S [sensor 2] circuit signal stuck rich)? What's likely causing this is the PCM is misinterpreting the A/F sensor (sensor 1) signals, causing the PCM to think that sensor 2 is stuck rich. To fix this issue, replace both sensors.
- 10141171Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10141168Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10139568Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement driver's airbag inflator only.
- 10129465Service bulletin - Under severe conditions, water or other liquid may enter the driver's window and reach the power window master switch on the door panel. Liquid in the switch can damage the switch?s printed circuit board (PCB), causing the switch to fail.
- 10128880Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128879Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128878Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128578Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128577Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128564Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants.
- 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
- 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
- 10124983Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118840Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10118182Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118031Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10115209Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108579Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108532Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108461Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108445Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108257"Service bulletin - certain honda vehicles operated in areas known for high absolute humidity and high heat may contain a drivers airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108232"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108186"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10100701"Service bulletin - in certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10099821"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even though the vehicle may have been repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10098946"Service bulletin - the mil comes on with one of these dtcs: p2646/p2651 (rocker arm oil pressure switch circuit low voltage). P2647/p2652 (rocker arm oil pressure switch circuit high voltage). Note: the symptom may be intermittent and you may not be able to duplicate it after clearing the dtc. The rocker arm oil pressure switch may fail intermittently."
- 10086381Us virgin islands newspaper advertisements to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086308Text messages sent to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086306Posters sent to hawaiian independent repair facilities, automotive part stores, car washes, and gas stations to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086302Advertisement in hawaiian newspapers to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086291Flyer circulated to the residents of hawaii to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086288Letter sent in conjunction with the florida highway safety and motor vehicles department to remind florida owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10052884Honda: dtc p2646/p2651 or p2647/2652 may be set. The rocker arm oil pressure switch may need to be replaced. Also included model civic si model year 2002-2005.
- 10052477Honda: the engine shuts off, power on, but in accessory; never use conventional wheel & tire assemblies on pax vehicles; mil on after throttle body cleaning or replacement; s/m fix brake system bleeding, dialogue for dvd surround sound from front speakers only. Various models and model years.
Every Honda CR-V model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.