2008 Jeep Wrangler
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Jeep › Wrangler › 2008
These records cover every 2008 Jeep Wrangler. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2008 Jeep Wrangler. Newest first.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2007-2010 Jeep Wrangler JK vehicles manufactured March 2, 2006, to August 13, 2010. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.
Risk and remedy
Risk
Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.
Remedy
Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on December 14, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S33.
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 Jeep Wrangler right-hand drive vehicles manufactured February 1, 2007, through October 10, 2011. The affected vehicles have airbag clockspring assemblies that could experience broken airbag circuits.
Risk and remedy
Risk
In the event of a crash necessitating airbag deployment, a broken electrical circuit in the airbag clockspring wiring assembly can lead to non-deployment of the driver-side frontal airbag and will not be able to properly protect the driver, increasing the risk of injuries.
Remedy
Chrysler will notify owners, and dealers will replace the clockspring and add a steering wheel dust shield, free of charge. The recall began on June 10, 2013. Owners may contact Chrysler at 1-800-247-9753. This recall supercedes NHTSA recall 11V-528. Chrysler's recall campaign number is M31.
Quadratec, Inc. is recalling certain aftermarket accessory, driver-side, Ultimate Floor Liners part numbers 14254.0301 07, 14254.0301 08, 14254.0301Q, 14254.0302 07, 14254.0302 08, 14254.0302Q, 14254.0303 07, 14254.0303 08, 14254.0303Q, 14254.0309 07, 14254.0309 08, and 14254.0309Q sold from May 1, 2012, through February 14, 2013. The liners are for use in…
Risk and remedy
Risk
If the liner shifts forward it may impede the operation of the accelerator and possibly lead to unintended acceleration, which may increase the risk of a crash.
Remedy
Quadratec will notify owners and either exchange the liners or provide them with a hook guard kit to help secure the driver-side mat, free of charge. The recall began on April 4, 2013. Owners may contact Quadratec at 1-800-463-2998 or info@quadratec.com.
Chrysler IS recalling certain model year 2008-2012 right hand drive (rhd) jeep wrangler vehicles manufactured from february 1, 2007, through october 10, 2011. some vehicles may be equipped with driver's airbag clockspring assemblies that could experience a compromised airbag circuit resulting in an airbag lamp illumination, which indicates that the airbag…
Risk and remedy
Risk
A broken electrical circuit in the airbag clockspring wiring assembly can lead to non-deployment of the driver frontal airbag and will not be able to properly protect the driver in the event of a crash, increasing the risk of injuries.
Remedy
Chrysler will notify owners and remedy the vehicles as necessary free of charge. chrysler will mail to owners an interim notification during march 2012. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2007 through 2010 jeep wrangler left and right hand drive passenger vehicles manufactured from may 15, 2006 through april 22, 2010. there may be contact between the right and left front inner fender liners and the right front and left rear brake tubes which could cause wear of the tubes causing a brake fluid leak.
Risk and remedy
Risk
A brake fluid leak can cause partial loss of service brakes at the affected wheel increasing the risk of a crash.
Remedy
Chrysler will notify owners and dealers will repair the vehicles free of charge. owners may contact chrysler toll-free at 1-800-853-1403.
Chrysler IS recalling certain model year 2007 through 2008 jeep wrangler vehicles manufactured from june 2006 through july 2008, equipped with automatic transmissions. these vehicles were not equipped with a transmission fluid temperature warning system.
Risk and remedy
Risk
Fluid could boil over and may come into contact with a hot engine or exhaust component and cause a fire.
Remedy
Dealers will inspect and install a "hotoil" message in the instrument cluster and a chime indicating an elevated transmission fluid condition. the recall began on february 22, 2010. owners may contact chrysler at 1-800-835-1403.
Chrysler IS recalling 308 aftermarket mopar tow bar assemblies, p/n 82209758, sold during 2007 and 2008 calendar year which are used to tow model year 2007 and 2008 jeep wrangler vehicles.
Risk and remedy
Risk
The tow bar can fail under certain driving conditions. this can result in the towed vehicle separating from the towing vehicle, possibly resulting in a crash.
Remedy
Chrysler will notify the owners of all 2007 and 2008 model year jeep wrangler vehicles who could have purchased a recalled tow bar and will replace the tow bars free of charge. the safety recall began on november 23, 2009. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling 1,585 my 2007-2008 jeep wrangler, right hand drive only, vehicles. some vehicles may have insufficient clearance between the steering intermediate shaft and rear brake tubes.
Risk and remedy
Risk
Prolonged brake tube contact could wear a hole in the tube and cause a partial brake system loss. this could cause a crash without warning.
Remedy
Dealers will install a revised brake tube clip to retain the tubes, inspect the brake tubes for damage due to potential contact with the steering intermediate shaft, and replace the brake tubes if necessary. the recall began on june 30, 2008. owners may contact chrysler at 1-800-853-1403.
Owner complaints
873 complaints15 involved a crash25 involved a fire5 injuries
What owners report most
Latest complaints
- Air bags
"On March 4, 2022, Customer Satisfaction Notification S33 (Airbag Clockspring Recall Remedy) was performed on my 2008 Jeep Wrangler by an authorized dealer at 123,314 miles. The vehicle now has 137, 347 miles. The replacement clockspring provided as the official safety remedy has completely failed…
"On March 4, 2022, Customer Satisfaction Notification S33 (Airbag Clockspring Recall Remedy) was performed on my 2008 Jeep Wrangler by an authorized dealer at 123,314 miles. The vehicle now has 137, 347 miles. The replacement clockspring provided as the official safety remedy has completely failed after only roughly 15,000 miles of driving, illuminating the SRS airbag warning light and completely disabling the supplemental restraint system. The manufacturer's mandated remedy has failed to permanently correct the safety defect, creating a recurring hazard." Tom O'Brian dealership and Stellanis have both refused to repair clockspring which is either defective repair item. "Stellantis corporate directed me to speak with you directly regarding a safety component failure. Tom O’Brien Jeep performed the S33 clockspring campaign on my Wrangler at 123,314 miles. The vehicle only has about 138,000 miles on it now. This critical airbag safety component failed after just 15,000 miles of driving. Corporate told me that if you submit a Digital Goodwill Claim through the dealer portal for an internal part failure on a safety campaign, they can review it for approval. Because this disables my entire airbag system after only 15,000 miles, I am asking you to submit that goodwill request so Stellantis can cover the replacement." ," no federal safety regulator or corporate executive expects a vital component of a vehicle's supplemental restraint/airbag system to fail after just 15,000 miles. This extremely low mileage proves one of two things: either the replacement remedy part was defective out of the box, or the "dust shroud" modification required by the S33 campaign was not installed correctly, allowing the new clockspring to fail prematurely.
- Unknown or other
Odometer rollback and was not aware until yesterday.
- Service brakes
ABS systems not functioning properly, showing engine code U0121 that states lost communication with ABS module. This is a common occurrence with jeeps and is a safety issue due to the abs system not working properly. Also causes the brakes to randomly engage and disengage.
- Electrical system · Engine · Exterior lighting
While driving at speed, vehicle electrical went haywire. Headlights went on and off. Horn sounding on and off, Wipers and washers going on and off, HVAC blower on and off. Pulled over vehicle and turned off and removed key and it still remained running, all horn, lights, and wipers still going…
While driving at speed, vehicle electrical went haywire. Headlights went on and off. Horn sounding on and off, Wipers and washers going on and off, HVAC blower on and off. Pulled over vehicle and turned off and removed key and it still remained running, all horn, lights, and wipers still going on and off. Opened hood, removed negative battery terminal, and with that, car still ran! Was several minutes and car finally shut itself off. Scary that the car went completely haywire and would not shut off, even with key out, and battery disconnected!
- Electrical system · Forward collision avoidance › Automatic emergency braking · Service brakes
The ABS computer brake module is bad in my jeep. It needs a replacement. Confirmed by Chrysler Jeep dealership. However, Chrysler does not offer a replacement module. ABS does not work on my vehicle. This is a huge safety issue and is common problem among this year Jeep. Chrysler shouldn’t be allowed to NOT have a replacement OEM ABS module. Huge safety risk and lawsuit
- Electrical system · Power train · Service brakes
ABS control module has gone out
- Air bags
I turned the key to turn on my car and the airbag deployed.
- Electrical system · Engine · Unknown or other
I was driving down the road in my 2008 wrangler and all of the sudden every light flashed on my dash board then it felt like I could not shift gears then smoke came pouring out of my air vents. I pulled over and got out realizing it was on fire. Climbed in to save my dog just before the fire got huge. My entire Jeep is gone.
- Electrical system · Service brakes
April 22, 2025 my 2008 Jeep lost power. There was a sequence, where one warning light was followed by another, followed by a complete loss of power. I charged the battery, car started up, I drove to dealer (a 5-minute trip), and by my arrival the Jeep had again lost all power. Dealer checked the…
April 22, 2025 my 2008 Jeep lost power. There was a sequence, where one warning light was followed by another, followed by a complete loss of power. I charged the battery, car started up, I drove to dealer (a 5-minute trip), and by my arrival the Jeep had again lost all power. Dealer checked the vehicle, and told me the battery and charging system were fine, but the ABS brake modulator was draining the power. They have not been able to get another modulator and the vehicle is still at the dealer (Crown Chrysler Jeep Dodge Ram Dublin, OH). Losing power precipitously presents a safety hazard.
- Service brakes
The vehicle requires an ABS module. I have been waiting for over 4 months for part availability. According to dealer they dont have any ETA on availability and have been told it may not be something they ever go back to producing. My state requires safety inspection which it will not pass due to this issue. Seems to me that someone needs to be responsible to make a part for these issues.
- Service brakes
This is a common flaw with the abs brake system on many Chrysler Fiat vehicles and Chrysler fiat is doing NOtHING. My Jeep ABS computer module went bad . No damage, no off roading. Driving on highway and all the brake/abs/stability control lights lit up on my dash. The abs showed code “c2200”…
This is a common flaw with the abs brake system on many Chrysler Fiat vehicles and Chrysler fiat is doing NOtHING. My Jeep ABS computer module went bad . No damage, no off roading. Driving on highway and all the brake/abs/stability control lights lit up on my dash. The abs showed code “c2200” bad abs module and must replace. However Chrysler stopped making these …in back order for years. You have to either get a junk yard part or send your computer away to be Refurbished. How can Chrysler be allowed to not have a critical safety part in stock…and not cover this in a lifetime warranty. ?? I’ve never had any other vehicle where the abs computer goes bad . This is insane. And dealer can’t locate the part in the USA because Chrysler doesn’t have them.
- Service brakes
ABS Module Yes As I was driving and going to turn left into a shopping center and stepped on the break, I had none, I did almost crash. It happened all of a sudden out of nowhere no lights, no icons lit. The problem has been confirmed by a dealer stating that this is a nationwide issue that’s…
ABS Module Yes As I was driving and going to turn left into a shopping center and stepped on the break, I had none, I did almost crash. It happened all of a sudden out of nowhere no lights, no icons lit. The problem has been confirmed by a dealer stating that this is a nationwide issue that’s currently going on that the parts are back ordered because there is nothing in production right now for the part. The vehicle is not drivable.
- Wheels
Defective Wheel Spacers Causing Vehicle Failure and Safety Hazard While driving, the front driver-side wheel spacer failed, leading to the complete detachment of the wheel from my vehicle. This unexpected and catastrophic failure left us stranded on the highway for several hours, waiting for…
Defective Wheel Spacers Causing Vehicle Failure and Safety Hazard While driving, the front driver-side wheel spacer failed, leading to the complete detachment of the wheel from my vehicle. This unexpected and catastrophic failure left us stranded on the highway for several hours, waiting for roadside assistance. Additionally, the front end of the Jeep sustained significant damage, requiring extensive repairs. Fortunately, we were able to bring the vehicle to a stop without injuries, but the situation could have resulted in a far more serious accident. Upon further inspection by road side assistance, it became evident that the wheel spacer had completely failed, raising concerns about the safety and reliability of this product. I immediately contacted Yitamotor to seek an explanation, reimbursement for damages, and information on whether this issue is a known defect in their product. In my formal request to the company, I outlined the following concerns: Investigation: I requested a thorough investigation into why the wheel spacer failed and whether similar failures have been reported. The supplier has no interest in investigating the failure. The part failed without warning. There are no direct sensors or indicators for this particular part. They claim the part is made of forged metal.
- Air bags
Have tried twice by phone to request the closest Jeep dealership recommended on the numerous recall cards mailed to have recalls fixed at Williams Chrysler Dodge Jeep Ram, 1100 E Main st., Stigler, OK. 74462. Each contact with dealership to get appointment to fix recalls fixed the individual asks…
Have tried twice by phone to request the closest Jeep dealership recommended on the numerous recall cards mailed to have recalls fixed at Williams Chrysler Dodge Jeep Ram, 1100 E Main st., Stigler, OK. 74462. Each contact with dealership to get appointment to fix recalls fixed the individual asks “what is the VIN number?” give requested info then ask “Did you purchase at our location?” No we did not was purchased in Texas when husband was on R&R from being deployed in Middle East. The person then states”Give good contact number and when the parts arrive will call to make appt to fix recalls.” This has been over six month period with no calls or resolution. I am [XXX] and need to have reliable and above all safe transportation for my spouse who retired 24 yrs active army to drive me. I have tried to be patient and polite that maybe he forgot or misplaced info but appears that since we did not purchase there they feel no need to fix our by law recalls. So any help from your end would be greatly appreciated. Don’t like making out any kind of complaint but need these recalls fixed or vehicle in question will remain parked due to the fact our recalls may or may not injure us and we are not willing to chance dying in a vehicle the manufacturer is responsible for those recalls. Thank you for your time and hope by this investigation this dealership will not refuse any requested recall fixes because of where it was purchased. Finally, due to this report will feel more comfortable going to another Jeep dealership due to repercussions of my filling this complaint. Thank you! INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Fuel/propulsion system
The fuel filler neck has an issue. When I refuel, I have to stop the pump manually or the filler cap will overflow. This creates a significant risk for fire or explosion unless I very carefully monitor how much fuel I am putting in the vehicle. I see several other owners experiencing this issue from online information I'm reading. I feel that this is an issue which should be repaired by the manufacturer.
- Equipment · Service brakes, hydraulic
The contact owns a 2008 Jeep Wrangler equipped with Powerstop Brake Hoses, Part Number: (N/A). The contact stated that after installing the brake hoses to the rear driver’s and passenger’s side brake assemblies, there was smoke coming from the rear driver's side brake rotors while operating the…
The contact owns a 2008 Jeep Wrangler equipped with Powerstop Brake Hoses, Part Number: (N/A). The contact stated that after installing the brake hoses to the rear driver’s and passenger’s side brake assemblies, there was smoke coming from the rear driver's side brake rotors while operating the vehicle due to brake fluid leaking from the hose. The manufacturer and local dealer were notified of the failure. The contact was informed of the NHTSA Campaign Number: 24E053000 (SERVICE BRAKES, HYDRAULIC). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was not provided.
- Electrical system
The ignition switch stays on after releasing key
- Unknown or other
See attached document for complaint
- Air bags · Steering
The RHD Jeep Wranglers had a recall on all the clock springs. I had mine fixed, it lasted a year and then broke again. Every mail carrier I know has the same issue. I believe the recall needs to become a lifetime recall, not a singular recall. They are all failing again causing postal employees to be at risk for fatality with the airbag failing to deploy.
- Power train
The contact owns a 2008 Jeep Wrangler. The contact stated while driving at various speeds, the vehicle jerked while depressing the accelerator pedal. There were no warning lights illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or local dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 17,250.
- Power train · Service brakes
I have a 2008 Jeep Wrangler Rubicon that has a lifetime powertrain warranty. Since I purchased the vehicle in 2008 I have maintained it exactly as required to keep the warranty valid. This includes the 5 year lifetime warranty powertrain inspections which are performed every 5 years. I have…
I have a 2008 Jeep Wrangler Rubicon that has a lifetime powertrain warranty. Since I purchased the vehicle in 2008 I have maintained it exactly as required to keep the warranty valid. This includes the 5 year lifetime warranty powertrain inspections which are performed every 5 years. I have documented proof of the inspections. In January 2024 my ABS brakes failed and I went to my local dealership where I purchased the vehicle. The dealership service department told me that my ABS module failed with a code of C2200 ABS Module Internal Failure. the part number is 68030936-AB. The dealership said they ordered the part from the manufacturer. Since January 09, 2024 I have called the dealership about the ABS module. They told me I could drive the vehicle and that it would brake, but the antilock brakes would not work. This ABS module also controls the Electronic Stability Program, and that does not work either. Chrysler has not manufactured the broken part. Chrysler sold me the vehicle with a lifetime powertrain warranty and this part is included in the warranty. However, Chrysler has failed to provide a replacement part or offered another vehicle to safely drive.
- Engine and engine cooling › Engine › Oil/lubrication · Power train
The contact owns a 2008 Jeep Wrangler. The contact stated while driving at an undisclosed speed, the transmission overheated, and the oil warning light was illuminated. The contact was able to restart the vehicle, but the failure persisted. The vehicle was taken to the dealer but was not diagnosed. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Unknown or other
I was driving on freeway noticed smoke behind jeep, I pulled over there was black smoke and fire coming from under hood on passenger side
- Electrical system
TIPM intermittent, fuel pump cuts off
- Electrical system
TIPM intermittent failures
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Clockspring Wiring Failure
On May 10, 2016, Fiat Chrysler America (FCA) submitted a Part 573 Defect Information Report announcing NHTSA recall 16V290 involving 394,258 model year (MY) 2007-2010 Jeep Wrangler vehicles.Under the recall FCA will replace the clockspring and install a steering wheel back cover and steering wheel column shroud.This…
On May 10, 2016, Fiat Chrysler America (FCA) submitted a Part 573 Defect Information Report announcing NHTSA recall 16V290 involving 394,258 model year (MY) 2007-2010 Jeep Wrangler vehicles.Under the recall FCA will replace the clockspring and install a steering wheel back cover and steering wheel column shroud.This recall also includes approx. 4,524 MY2007-2010 right hand drive (RHD) Jeep Wrangler vehicles commonly used for rural postal delivery services.In addition 7,180 MY 2011-2016 right hand drive Jeep Wrangler vehicles were also recalled under 16V288, the same remedy repair will be used.Upon review of the 1,942 MY 2007-2010 Jeep Wrangler consumer complaints, 17,195 warranty reports and field returned parts assessment, FCA concluded that a defect exists in the driver side clockspring assembly, a device that both connects (electrically) the driver air bag to the control module and allows rotational movement between the steering wheel and fixed steering column.Clockspring failure may compromise the air bag circuit causing illumination of the air bag warning lamp, and may result in non-deployment of the driver air bag in a frontal crash.FCA identified a contributing factor in that the recalled vehicles may be subjected to off-road dusty environments and/or usage with the vehicle roof top/doors removed thus allowing dust and moisture to enter the clockspring assembly.FCA advised that the MY 2011 and later Wrangler vehicles had an improved steering column cover/shroud that may reduce the amount of dirt/moisture that can enter the clockspring assembly.During the investigation FCA and the Office of Defects Investigation (ODI) also reviewed 193 MY 2011-2012 Jeep Wrangler consumer complaints, 3,918 warranty reports and field returned parts along with reports from other FCA vehicles that use the same clockspring assembly.Based on this review, the rate of repair and the failure mode does not indicate a defect trend at this time in the later MY Wrangler or other FCA vehicles.During the field return parts review, FCA found a significant number of MY 2011-2012 Wrangler returned parts that operated normally, the so called ?no trouble found? or NTF parts where no fault could be identified through bench testing.On June 10, 2016, FCA informed ODI of its intention to conduct a 15-yr, 150k mile extended warranty program due to the NTF issue and the MY 2011 and later vehicles having a somewhat elevated level of warranty replacement.Consumers will be notified of the program in writing.FCA will collect clocksprings replaced under the warranty extension program to further examine and study the root cause failure.ODI will monitor FCA?s analysis to determine if any further field action is warranted.Based on the actions taken by FCA to recall the MY 2007-2010 Jeep Wrangler vehicles and the MY 2008-2016 right hand drive Wrangler vehicles, this investigation is closed.FCA has also agreed to conduct a warranty extension and further evaluation of the MY 2011-2016 Wrangler.At the time of FCA's field data submission in PE 15-025 (September 2015), ODI was aware of a total of 416 MY 2007-2010 and 23 MY 2011-2012 VOQs relevant to this issue.In addition, there have been an additional 90 and 16 VOQs (respectively) received since the recall announcement (i.e., thru May 2016).The reports noted above can be viewed at SaferCar.gov under the reference (ODI) numbers cited on the attached listing.
- Air Bag Clockspring Wiring Failure
In it's response to ODI's PE15-025 Information Request letter, FCA identified 1,703 consumer complaints, field reports and legal claims responsive to the subject defect condition on the subject Wrangler vehicles.Six of these reports alleged an air bag non-deployment in a crash in which either the air bag warning light…
In it's response to ODI's PE15-025 Information Request letter, FCA identified 1,703 consumer complaints, field reports and legal claims responsive to the subject defect condition on the subject Wrangler vehicles.Six of these reports alleged an air bag non-deployment in a crash in which either the air bag warning light was allegedly on or came on afterward the crash, one of which also alleged injuries as a result of the non-deployment.FCA also provided data on other make, model and model year vehicles using the same clockspring.Additionally FCA provided 16,955 warranty claims related to the replacement of the air bag clockspring wiring assembly.It should be noted that FCA initiated an Extended Warranty Program on the left hand drive MY 2007 Wrangler in late calendar year 2011.6,777 of these claims are from the MY 2007 left hand drive Wrangler.FCA advises that some of the warranty claims involved clockspring failures that would not affect the air bag operation, for example due to noise, cruise control and/or radio operation issues.Many of these claims involved newer model year subject vehicles.FCA also noted that Wrangler's removable roof and door configuration may make it more susceptible to outdoor water/moisture and dust ingress.ODI investigated the right hand drive Wrangler in calender year 2011 for a similar clockspring issue under PE11-019.That investigation lead to NHTSA Safety Recall 11V258 on right hand drive model year (MY) 2008-2012 Wranglers.FCA redesigned the remedy clockspring to improve its durability and environmental protection and revised the design of the steering wheel to column shroud.Base on the data reviewed, this Preliminary Analysis (PE) is being upgraded to an Engineering Analysis (EA).The reports cited above are listed in the public investigative file available at SaferCar.gov under this investigation ID.
- Totally Integrated Power Module Failure
In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007…
In a letter dated August 21, 2014, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a defect investigation of alleged failures associated with the Totally Integrated Power Module (TIPM) installed in Chrysler SUV?s, trucks, and vans beginning in the 2007 model year. The petitioner alleges that TIPM defects may result in engine stall, airbag non-deployment, failure of fuel pump shutoff resulting in unintended acceleration, fire, and other symptoms. On September 25, 2014, the Office of Defects Investigation (ODI) opened DP14-004 to evaluate the petition for a grant or deny decision. ODI analyzed complaint data provided by CAS as well as complaints submitted to ODI from consumers. In total, there were 296 complaints submitted by the petitioner in the original petition and five supplements, including 271 complaints related to the subject vehicles equipped with TIPM-7. Approximately 3 percent of CAS complaints are related to vehicles equipped with TIPM-6 and ODI?s review of these complaints did not identify any safety defect trends. ODI conducted a detailed review of complaints narratives submitted by CAS and consumers including careful analysis of vehicle repair histories, warranty claims obtained from the manufacturer and any available Customer Assistance Inquiry reports (CAIR). Analysis of the field data indicated that MY2011-2013 Jeep Grand Cherokee and Dodge Durango vehicles exhibited significantly higher complaint rates related to fuel pump relay (FPR) failures than other subject vehicles. In a September 3, 2014 letter to NHTSA, Chrysler submitted a Defect Information Report (DIR) identifying a defect in the FPR within the TIPM-7 which can result in a no start or stall condition in approximately 188,723 model year (MY) 2011 Jeep Grand Cherokee (WK) and Dodge Durango (WD) vehicles manufactured from January 5, 2010 through July 20, 2011 (14V-530).In a February 24, 2015 letter, Chrysler submitted a second DIR expanding the scope of the FPR defect condition to include an additional 338,216 MY 2012 through 2013 Jeep Grand Cherokee vehicles manufactured from September 17, 2010 through August 19, 2013 and MY 2012 through 2013 Dodge Durango vehicles manufactured from January 18, 2011 through August 19, 2013 (15V-115).ODI analysis of the CAS allegations of TIPM defects resulting in stall while driving, airbag non-deployment, unintended acceleration, fire and other faults identified a single defect condition related to 1 of over 60 different circuits in the TIPM assembly. The most common effect of this defect condition, related to the fuel pump relay, was a no-start concern, but it could also result in stall while driving (76 complaints). No valid evidence was presented in support of claims related to airbag non-deployment, unintended acceleration or fire resulting from TIPM faults and these claims were found to be wholly without merit based on review of the field data and design of the relevant systems and components.Except insofar as the petitioner's contentions relate to the defect condition addressed by the Chrysler recalls, the factual bases of the petitioner's contentions that any further investigation is necessary are unsupported. In our view, additional investigation is unlikely to result in a finding that a defect related to motor vehicle safety exists or a NHTSA order for the notification and remedy of a safety-related defect as alleged by the petitioner at the conclusion of the requested investigation. Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to best accomplish the agency's safety mission, the petition is den
- Airbag Clockspring Failure
In its July 29, 2011 response to ODI's May 27, 2011 information request letter, Chrysler provided 153 MY 2007-2008 owner reports, additional to the 28 ODI Vehicle Owner Questionnaires (VOQs), which related to the illumination of the air bag light (ABL) due to a faulty clockspring (CS) wiring circuit.The right hand…
In its July 29, 2011 response to ODI's May 27, 2011 information request letter, Chrysler provided 153 MY 2007-2008 owner reports, additional to the 28 ODI Vehicle Owner Questionnaires (VOQs), which related to the illumination of the air bag light (ABL) due to a faulty clockspring (CS) wiring circuit.The right hand drive (RHD) vehicles, which were first produced in MY 2008 and account for only 1% of vehicle production, accounted for 82 of these 181 reports (45%).The MY2007 left hand drive (LHD) vehicle accounted for 61 of the remaining 92 LHD reports and exhibited a higher complaint rate than the MY 2008 LHD vehicles.ODI did not identify any incidents of crashes/injuries attributable to the CS circuit failure.Since May 27, 2011, ODI has received another 32 consumer complaints bringing the total to 213 reports at this closing.In addition, and for comparative purposes, Chrysler provided another 42 owner reports it received on the MY2006 and MY2009-2010 Wrangler vehicles; these populations showed a lower incident rate than the subject vehicles, especially in comparison to the RHD subject vehicles. Chrysler's investigation showed that the higher rate of RHD Wrangler CS failures were due to a more severe duty cycle for these vehicles which are primarily used by US Postal workers/mail carriers delivering mail in rural regions.Chrysler concluded the unique vehicle usage, much of which occurs with the driver's window open and under dusty environmental conditions, is the cause of premature CS failure.Chrysler's analysis also indicated that the somewhat elevated MY2007 LHD rate, which showed a declining failure trend, was the result of start-up production/assembly issues that occurred with the introduction of a new design CS.The new design CS incorporated both dual airbag inflator circuitry and a steering wheel angle sensor (for the electronic stability control system).On November 1, 2011, Chrysler submitted a defect notice indicating it will conduct a recall of all MY 2008-2012 RHD Wrangler vehicles (11V528).The estimated 5,334 RHD Wrangler vehicles include the 2,297 MY 2008 RHD Wrangler vehicles, which were the subject of this investigation, plus an additional 3,037 MY 2009-2012 RHD Wrangler vehicles that Chrysler determined potentially have a similar CS concern as the MY 2008 RHD vehicles.Chrysler intends to replace the existing CS with a yet-to-be-produced improved CS assembly, or an improved steering housing assembly that is less susceptible to dusty environments.Owner notice is scheduled to begin in November, 2011.Chrysler also informed ODI that it intends to initiate a consumer satisfaction campaign for MY2007 LHD Wrangler which will extend the CS warranty coverage for 10 years or 150,000 miles.Accordingly the investigation is closed.
- Fuel Spill During Refueling
ODI found the rate of warranty claims related to fuel spit back on the subject vehicles is lower than other vehicles previously recalled to correct defects related to fuel spit back.Although the rate of complaints reported to the agency on the subject vehicles is higher than or similar to the rates experienced in…
ODI found the rate of warranty claims related to fuel spit back on the subject vehicles is lower than other vehicles previously recalled to correct defects related to fuel spit back.Although the rate of complaints reported to the agency on the subject vehicles is higher than or similar to the rates experienced in previous investigations where safety recalls were conducted, ODI suspects that the NHTSA safety complaints submitted by subject vehicles owners may have been influenced by internet related publicity both before and during this investigation.A safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.See attached report for additional information.In addition, Chrysler is initiating a lifetime warranty program, at no cost to the consumer, to address the fuel spit back problem in approximately 135,000 model year 2007-2008 Jeep Wrangler vehicles built from March 1, 2007 to March 31, 2008.Chrysler will notify all affected vehicle owners of this action.Consumers should refer to the warranty and service bulletins and sample owner notification letter available in the investigative file.The vehicle build date can be found on the certification label located on the driver door or door jamb.
- Transmission overheating / fire
In a letter dated november 3, 2009, chrysler group llc (chrysler), notified nhtsa that it will conduct a safety recall of approximately 161,000 model year (my) 2007 and 2008 jeep wrangler vehicles built with automatic transmissions.chrysler stated that these vehicles were not equipped with a transmission fluid…
In a letter dated november 3, 2009, chrysler group llc (chrysler), notified nhtsa that it will conduct a safety recall of approximately 161,000 model year (my) 2007 and 2008 jeep wrangler vehicles built with automatic transmissions.chrysler stated that these vehicles were not equipped with a transmission fluid temperature warning system and the operation of these vehicles beyond the limits of reasonable usage over a period of time could result in transmission failure and in some cases transmission fluid expulsion.the expelled fluid could come in contact with a hot engine or exhaust component and cause a fire.chrysler will conduct a safety recall to install a hot oil warning message in the instrument cluster and a chime indicating an elevated transmission fluid temperature condition.an owner's manual addendum stating the purpose of the hot oil message and chime to include caution and warning statements regarding elevated transmission fluid temperature conditions will be provided to owners.based on chrysler's decision to conduct a safety recall this engineering analysis IS closed.
- Tow bar assembly failure
The defective tow bar assemblies involved in this recall were supplied to chrysler for use on some of its jeep wrangler vehicles.the purpose of this investigation was to identify any additional purchasers of identical or substantially similar defective assemblies and to initiate additional defect reporting and safety…
The defective tow bar assemblies involved in this recall were supplied to chrysler for use on some of its jeep wrangler vehicles.the purpose of this investigation was to identify any additional purchasers of identical or substantially similar defective assemblies and to initiate additional defect reporting and safety recalls as necessary.to accomplish this rmd contacted the supplier of the assemblies, valley towing products, and confirmed no other such assemblies were distributed.this eq IS therefore closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010205Plate - Planetary
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10232025Cowl Trim Panel Fastener Water Leak
- 10229998KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.
- 10229986Cowl Trim Panel Fastener Water Leak
- 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223602Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10223525Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set
- 10223386KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.
- 10223226KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.
- 10221831(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10221069Cowl Trim Panel Fastener Water Leak This bulletin involves modifying or replacing the cowl trim panel fasteners to correct a water leak condition. The customer may describe a water accumulation condition on the vehicle floor front foot well area.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10219885Front Brake Caliper Hose Leak (X71 Warranty Extension) This bulletin involves replacing both front brake caliper hoses and wheel speed sensors. Customers may experience a brake fluid leak coming from the front wheel opening area. This issue is due to corrosion at the crimps on the brake caliper hosesFig.1.If the customer describes the symptom/condition listed above, perform the Repair Procedure.Example Of Corrosion At Crimps
- 10219850(X71) Front Left and Right Brake Caliper Hoses & Both Wheel Speed Sensors - 2007 - 2010 Jeep Wranglers (JK)
- 10219849Customer Satisfaction Notification S80 Aftermarket Dana 60 Front Axle The aftermarket front axle steering knuckles have been machined with an incorrect taper during the manufacturing process on about 250 of the above vehicles, with approximately 80 of the axles sold by Mopar aftermarket. This condition can result in premature axle knuckle wear. The aftermarket front axle knuckles must be replaced with new axle knuckles for the left side and right side.
- 10218307Flash: UConnect and Voice Recognition Inoperative This bulletin involves replacing the Hands Free Module (HFM). The customer may describe the following conditions: A complete loss of UConnect operation. A complete loss of Voice Recognition functionality
- 10218192Cowl Trim Panel Fastener Water Leak This bulletin involves modifying or replacing the cowl trim panel fasteners to correct a water leak condition. The customer may describe a water accumulation condition on the vehicle floor front foot well area.
- 10217693Soft Top Door Rail Service Kits Use this soft top door frame rail kit for worn foam or a water leak: 1) For 2010 - 2014 units, remove the old foam part, clean rail of any residue, alcohol wipe the surface, apply promoter (if available), and apply new foam part.~ 2) For 2007 - 2009 units, cut off 8.0 mm from the end that faces the windshield, remove the old foam part, clean rail of any residue, alcohol wipe the surface, apply promoter (if available), and apply modified foam part.
- 10217425Cracked Vinyl Soft Top Window This bulletin provides soft top vinyl window precautions during cold weather.
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10216187Cracked Vinyl Soft Top Window This bulletin provides soft top vinyl window precautions during cold weather.
- 10216000New Safety Recall Advanced Communication ? M31050813 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2008 through 2012 model year (JK) Jeep Wrangler vehicles equipped with a Right Hand Drive (RHD) steering configuration (sales code AHF) and built for U.S specifications (sales code YAA). Some of the above vehicles may have an airbag system clockspring assembly that could experience a compromised airbag circuit. This condition could result in an airbag warning lamp illumination. Chrysler will conduct a voluntary safety recall on all affected RHD vehicles to replace the airbag system clockspring. Additionally, 2008 through 2010 model year vehicles will receive a steering wheel dust shield. NOTE: Safety Recall L37 which provided an interim repair for this issue is being cancelled. Involved vehicle owners will be sent a second owner notification requesting they have their vehicle repaired. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
- 10215997Replacing Door, Hood And/Or Tailgate Hinges This bulletin involves replacing, refinishing and sealing door, tailgate and hood hinges.
- 10215916Warranty Bulletin D-18-16 Rev. B Mopar Windshield Made With Corning Gorilla Glass (Rev. B)
- 10198300KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.
- 10191460Valve Body. These may cause over drive cycling.
- 10189389Fuel Spit Back During Refueling (X47 Lifetime Warranty Extension) This bulletin involves replacing the fuel tube at the fuel tank. This new fuel tube has a check valve. Some customers may experience a fuel spit back condition during a refueling event.
- 10189371Soft Top Rear Window Zipper Will Not Disengage This bulletin involves removing the metal zipper stops from the end of the rear window zipper in order to adjust and realign the zipper tapes to eliminate zipper skips that can prevent the zipper from disengagement. .1 - Zipper Tapes Aligned Correctly2 - Metal Seperator Pins3 - Misaligned Zipper Tapes4 - Zipper Sliders
- 10188695New Safety Recall Advanced Communication ? M31050813 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2008 through 2012 model year (JK) Jeep Wrangler vehicles equipped with a Right Hand Drive (RHD) steering configuration (sales code AHF) and built for U.S specifications (sales code YAA). Some of the above vehicles may have an airbag system clockspring assembly that could experience a compromised airbag circuit. This condition could result in an airbag warning lamp illumination. Chrysler will conduct a voluntary safety recall on all affected RHD vehicles to replace the airbag system clockspring. Additionally, 2008 through 2010 model year vehicles will receive a steering wheel dust shield. NOTE: Safety Recall L37 which provided an interim repair for this issue is being cancelled. Involved vehicle owners will be sent a second owner notification requesting they have their vehicle repaired. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
- 10188692Replacing Door, Hood And/Or Tailgate Hinges This bulletin involves replacing, refinishing and sealing door, tailgate and hood hinges.
- 10187095Warranty Bulletin D-18-16 Rev. B Mopar Windshield Made With Corning Gorilla Glass (Rev. B)
- 10180221(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Every Jeep Wrangler model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.