2008 Nissan Titan
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › Titan › 2008
These records cover every 2008 Nissan Titan. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2008 Nissan Titan. Newest first.
Nissan North America, Inc. (Nissan) is recalling certain 2008-2011 Titan, Frontier, Xterra, Pathfinder, Armada, and 2008-2009 Quest vehicles. The resin emblem on the driver's air bag cover may develop cracks and detach during air bag deployment.
Risk and remedy
Risk
A detached emblem can become a projectile during air bag deployment, increasing the risk of injury to vehicle occupants.
Remedy
Dealers will replace the drivers airbag cover. Owner letters were mailed December 8, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall are PC944, PC945, and PC946.
Nissan IS recalling certain front and rear lower links, p/nos. 54501Zq00a, 54500zq00a, 551a1zq00a, 551a0zq00a , 54501ea00a, 54500ea00a, 551a1ea500, 551a0ea500, 54501zr00a, and 54500zr00a, sold between november 25, 2009 and may 14, 2010 as replacement parts for model year 2004 through 2010 titan, armada, and QX56, and model years 2005 through 2010 frontier…
Risk and remedy
Risk
If the collar weld separates, the vehicle handling will deteriorate, possibly resulting in a vehicle crash.
Remedy
Nissan will notify owners and dealers will replace any affected lower link free of charge. the safety recall began on july 12, 2010. owners may contact nissan at 1-800-647-7261.
Nissan IS recalling certain model year 2005-2009 titan, armada, and infiniti QX56 vehicles. the instrument panel fuel gauge may inaccurately display that the vehicle still has some fuel, typically about one quarter tank, when the fuel tank IS empty.
Risk and remedy
Risk
This could cause the vehicle to run out of gas and stall on the highway, which could cause a crash.
Remedy
Dealers will replace the fuel sender unit inside the fuel tank with a new improved sender card. this service will be performed free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Nissan IS recalling certain model year 2008-2010 titan, armada, and infiniti QX56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal…
Risk and remedy
Risk
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Remedy
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Nissan IS recalling 1,126 my 2008 quest, titan and armada vehicles equipped with manual adjustment front seats. these vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 207, "seating systems." the seat track assembly may have been manufactured out of specification.
Risk and remedy
Risk
This may result in the manual seat pawl not fully engaging increasing the risk of personal injuries in the event of a crash.
Remedy
Dealers will inspect the seat track assembly on the driver's and front passenger seats and replace the entire seat assembly free of charge. the recall began on may 27, 2008. owners may contact nissan at 1-800-647-7261.
Nissan IS recalling 5,523 my 2008 titan, frontier and xterra vehicles for failing to comply to the requirements of federal motor vehicle safety standard no. 110, 'tire selection and rims for motor vehicles.' the tire placard lists an incorrect vehicle capacity weight.
Risk and remedy
Risk
This standard specifies requirements for tire selection to prevent overloading.
Remedy
Nissan will mail a correct tire placard and installation instructions to owners of the affected vehicles. the recall began on february 25, 2008. owners may contact nissan at 1-800-647-7261.
Owner complaints
133 complaints7 involved a crash1 involved a fire8 injuries
What owners report most
Latest complaints
- Fuel/propulsion system
Similar to Campaign ID: 10V074000, the fuel gauge will reach a quarter tank and then drop to empty without warning.
- Air bags
While driving down the road a pot hole was hit and the center cap of steering wheel split as if airbag should have deployed.
- Engine
The exhaust manifolds on the driver and passenger side are cracked. Ticking sounds are made while car is cold and goes away after they have heated up enough, typically after 5 minutes. This results in letting in exhaust fumes inside the cabin, regardless of the air conditioner/heater is on, which…
The exhaust manifolds on the driver and passenger side are cracked. Ticking sounds are made while car is cold and goes away after they have heated up enough, typically after 5 minutes. This results in letting in exhaust fumes inside the cabin, regardless of the air conditioner/heater is on, which leads to being lightheaded and nearly passing out and crashing. The fumes are stronger when stationary but happens no matter what, even after the ticking is gone and driving down the highway.
- Visibility/wiper
Passenger side window has came off track and fell into door panel. There is no way to open door to get to window to put back on track to raise window
- Fuel/propulsion system
There is an issue with the fuel gauge. Not reading correctly and running out of gas. Needle is at half tank and it has run out of fuel. I’ve had this happen to me multiple times. Gage reads more than I physically have. I’ve even ran out of fuel on the freeway.
- Fuel/propulsion system
I am writing in regards to a recall that has previously been serviced on my vehicle. I bought my 2008 Nissan Titan through a private party on 4/16/23. The truck had no issues until 4/20/23. The fuel gauge read that I had a quarter tank of gas. However I was driving to work that morning and all of a…
I am writing in regards to a recall that has previously been serviced on my vehicle. I bought my 2008 Nissan Titan through a private party on 4/16/23. The truck had no issues until 4/20/23. The fuel gauge read that I had a quarter tank of gas. However I was driving to work that morning and all of a sudden the truck acted as if it would when one runs out of fuel. I was not able to use the breaks and the steering was near impossible. I was frightened as I had my baby in the truck with me and I easily could have caused an accident not being able to use my breaks especially. Once I got to the side of the road and we stopped "coasting" I called for help. I did have an individual bring me some gas just incase that could have been the issue. Sure enough once I put fuel in it the truck started up and I got to the closet gas station to fuel up. Come to find out once my gas gauge reads a quarter tank it is in fact empty. The truck had a recall serviced on 4/16/2010 to replace the fuel gauge sending unit. I took the truck in to be serviced on 4/24/23 because of the issue I experienced. I was told that it was more than likely the sending unit and it would cost me $600-$800 to have it fixed. Why should I have to pay for a cost that has already been serviced once? Is there a warranty on a recall that has already been serviced? Can this possibly be a defect in the recall that was already serviced?
- Unknown or other
Unknown
- Engine and engine cooling › Exhaust system › Manifold/header/muffler/tail pipe
The contact owns a 2008 Nissan Titan. The contact stated upon starting the vehicle, the vehicle emitted abnormal ticking sounds. There was no warning light illuminated. The contact stated that the failure persisted. The vehicle was taken to an exhaust specialist where it was diagnosed that the weld…
The contact owns a 2008 Nissan Titan. The contact stated upon starting the vehicle, the vehicle emitted abnormal ticking sounds. There was no warning light illuminated. The contact stated that the failure persisted. The vehicle was taken to an exhaust specialist where it was diagnosed that the weld joint between the tube and the common mounting plate of the manifold was cracked, allowing the exhaust gas to escape and expand underneath the hood of the vehicle. The vehicle was not repaired. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 95,000.
- Engine
The exaust manifolds cracked and is letting fumes into the cabin. I bought the truck about 2 weeks ago from a private dealer. The cracked manifolds began to leak a few days ago and I truthfully believe it should be covered by Nissan
- Fuel system, other
The contact owns a 2008 Nissan Titan. The contact stated that the fuel gauge inaccurately displayed the fuel level as empty. The contact had to constantly refuel the vehicle. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was made aware of the…
The contact owns a 2008 Nissan Titan. The contact stated that the fuel gauge inaccurately displayed the fuel level as empty. The contact had to constantly refuel the vehicle. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure but informed the contact that there was no recall associated with the VIN. The contact related the failure to NHTSA Campaign Number: 10V074000 (Fuel System, Other) however, the VIN was not included in the recall. The failure mileage was approximately 186,000.
- Air bags
In a low speed wreck (15mph or less) the air bag deployed sending the metal clip, holding the plastic Nissan emblem at the center of the steering wheel, flying. Hitting me right next to my eye at a very high rate of speed. Causing trauma to my eye and surrounding tissue. Missing my eye by less than…
In a low speed wreck (15mph or less) the air bag deployed sending the metal clip, holding the plastic Nissan emblem at the center of the steering wheel, flying. Hitting me right next to my eye at a very high rate of speed. Causing trauma to my eye and surrounding tissue. Missing my eye by less than an inch. If I would have been looking straight ahead instead of slightly to the right where the collision was, I would have lost my eye. How did this manufacturer allowed a piece of metal be installed in front of the air bag is mind boggling. Air bags deploy at speeds of 200mph, launching anything in front of them at that speed. I was very lucky, I hope this agency can warn everyone who owns a Nissan vehicle with this design of a metal clip holding the emblem at the center of the steering wheel. I have photos of the emblem, clip, steering wheel, air bag, and my injury showing exactly how/where the clip hit me by the cuts it left on my face in the shape of the clip. I tried to upload photos but received an error from the website. If you could contact me I would like to send you the photos. They prove without a doubt the facts started above. [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Engine · Steering · Wheels
I’ve done replaced the wheel hub assembly and break and rotors etc. My truck still acts like it’s trying to lock up . It’s jerking and takes a min to break
- Structure › Body
White patches appeared all around the truck within a week parked in my driveway. Spots and patches on hood,fenders, roof, tailgate and doors
- Structure › Body
The frame of my truck IS rusted so bad the top of the bed IS against the cab when I go down street the front of the bed pops up it's rotted over 3 quarters way threw please contact me asap thank you
- Air bags
2008 nissan titan, the airbag red air bag warning light started to illuminate on the highway. After further investigation it was found that the crash zone sensor p/n 98581-zt08a was defective do to corrosion and defective sealing of the internal electronics of the sensor (see attachment). to abruptly loose the vehicle's airbag function IS a safety hazard (on the highway without warning) and should be recalled.
- Engine
TL* the contact owns a 2008 nissan titan. The contact stated that there was a ticking sound coming from the engine when the vehicle was started. There was no warning light illuminated. The vehicle was taken to an independent mechanic who informed him that the exhaust manifold needed to be replaced.…
TL* the contact owns a 2008 nissan titan. The contact stated that there was a ticking sound coming from the engine when the vehicle was started. There was no warning light illuminated. The vehicle was taken to an independent mechanic who informed him that the exhaust manifold needed to be replaced. The contact spoke to carlock nissan of tupelo (3969 n gloster st, tupelo, ms 38804) where he was informed that the vehicle was not subjected to a recall. The manufacturer had not been notified of the failure. The vehicle was not repaired. The failure mileage was approximately 1,500.
- Engine
Crack/leaking driver side manifold.
- Engine · Power train
TL* the contact owns a 2008 nissan titan. The contact stated that while driving approximately 40 mph, the vehicle stalled without warning. The contact stated that the failure was intermittent. The contact was informed by an independent mechanic that similar vehicles were subjected to a recall…
TL* the contact owns a 2008 nissan titan. The contact stated that while driving approximately 40 mph, the vehicle stalled without warning. The contact stated that the failure was intermittent. The contact was informed by an independent mechanic that similar vehicles were subjected to a recall however, the campaign number was not provided. Palmetto57 nissan located at 16725 nw 57TH ave, miami gardens, fl 33055, (305) 521-8297, was contacted and informed of the failure. The manufacturer was informed of the failure. The approximate failure mileage was 150,000.
- Electronic stability control (esc) · Seats · Structure › Body
Heather &a/c control malfunction heather core leaks inside cab power train warning lights came on not all time paint clear coat IS pelen off
- Power train
2008 4X4 4D long bed titian , reverse gear stopped working right after power train warranty, ended at 36000 miles. I was using reverse when it failed. I was reversing at normal speed of .25 mp/h or what ever people back up to a parking stall normally. There was a tug type sensation, then slippage.
- Electrical system
Relay fuses(black) blows out during the summer months mainly. everything stops. it gives a warning where truck misses or jerks. dashboard goes crazy. lights blink off and on. once fuses are replaced, it has to reset before it starts. it has been 2 years of these issues. replaced entire box…
Relay fuses(black) blows out during the summer months mainly. everything stops. it gives a warning where truck misses or jerks. dashboard goes crazy. lights blink off and on. once fuses are replaced, it has to reset before it starts. it has been 2 years of these issues. replaced entire box, but it does the same thing. at cannon nissan, jackson, ms parts dept. We were told they sell a lot of fuses for the same issue.
- Power train
When turning with the 4 wheel drive engaged, a loud pop was heard like something slamming against metal. And my front tires would not spin causing the truck to get stuck, needing to be towed out. A mechanic fixed the problem of a snapped/broken flange assembly (part # 38220-8s11a) also circlip lock…
When turning with the 4 wheel drive engaged, a loud pop was heard like something slamming against metal. And my front tires would not spin causing the truck to get stuck, needing to be towed out. A mechanic fixed the problem of a snapped/broken flange assembly (part # 38220-8s11a) also circlip lock ring (part # 38225-8s110). the same parts broke a 2ND time requiring repair and now a 3RD time. I don't know what to do I cant afford to keep fixing the problem and cant afford a new truck please help us please!!!
- Air bags · Service brakes
The brake lights signal turns on and a light grinding noise can be heard and brakes go out. I have to stop for a few minutes and turn off my truck. after a few minutes, I turn on the truck and the brake lights turns off and my brakes start working again. this has happened more than twice.…
The brake lights signal turns on and a light grinding noise can be heard and brakes go out. I have to stop for a few minutes and turn off my truck. after a few minutes, I turn on the truck and the brake lights turns off and my brakes start working again. this has happened more than twice. thank god that the times it has happen there has been hardly any traffic. although, one day it happened on the freeway so I calmed down, release the gas pedal and cruised to the next exit and pulled into a gas station. all this time the brake fluid reservoir IS full so after turning off the truck and turning it back on again, that solves the problem. this IS very scary because we've been trying to take vacations on the truck and I don't feel safe driving it like this, especially with my three kids in the back. another issue that I have IS the airbag light just stays on and flashing. I've tried having it reset but it doesn't work. we have a 2007 nissan armada also and it has the same issues as my titan. we thought that by buying nissan we wouldn't have any issues, but we were wrong.
- Air bags
TL* the contact owns a 2008 nissan titan. The contact stated that the air bag warning indicator illuminated. The contact inspected the vehicle and noticed that the air bag sensor was corroded, which could prevent the air bags from deploying in the event of a crash. The contact stated that the…
TL* the contact owns a 2008 nissan titan. The contact stated that the air bag warning indicator illuminated. The contact inspected the vehicle and noticed that the air bag sensor was corroded, which could prevent the air bags from deploying in the event of a crash. The contact stated that the vehicle was experiencing the same failure as listed in nhtsa campaign number: 08v690000 (air bags). The dealer was not contacted. The manufacturer was notified and did not assist. The vehicle was not diagnosed or repaired. The failure mileage was 120,000.
- Visibility/wiper
Windshield washer motor stopped working. Now when the road conditions are bad the visibility IS drastically lowered. The more I research this problem and the one with the air conditioner not shutting off the more I notice that these are wide spread and very common issues.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 110090672004 - 2015 TITAN; VIBRATION AT 40 50 MPH This bulletin is no longer active. Please discard previous versions of NTB17-110.
- 11007000VOLUNTARY SAFETY RECALL CAMPAIGN 2004-2012 ARMADA, TITAN, AND 2004-2009 QUEST; DRIVER AIR BAG COVER CAMPAIGN ID #: PC944, PC946, PC947, PC949 APPLIED VEHICLES: 2004-2012 Armada (TA60) 2004-2009 Quest (V42) 2004-2012 Titan (A60) Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary safety recall campaign on certain specific model year 2004-2012 Armada, 2004-2012 Titan, and 2004-2009 Quest vehicles, to inspect and if necessary, replace the driver Air Bag Cover. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification numbers PC944, PC946, PC947 and PC949 to this campaign. The vehicle specific number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealers responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealers inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004962VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004961CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004960CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001201WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001194REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001191WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10233896ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208953DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208946CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192821SERVICE INFORMATION Replacement 5-speed rear wheel drive Automatic Transmission (A/T) assemblies and replacement control valves (valve bodies) now come with blank Transmission Control Modules (TCMs). Blank TCMs come without software and must be programmed (not reprogrammed) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Nissan electronic parts information systems to obtain the correct software program part number See this bulletin for further detail.
- 10192805IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location. ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. See this bulletin for further detail.
- 10192801SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- 10192747IF YOU CONFRIM An oil leak at the right side block ball plug behind the alternator. ACTION Use a punch to seat the block ball plug in the hole (refer to the Service Procedure). NOTE - Do not replace the engine block for this incident if it should occur. See this bulletin for further detail.
- 10192727SERVICE INFORMATION The purpose of this bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
- 10192679SERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be initialized. See this bulletin for further details.
- 10192677SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulletin for further details.
- 10192642IF YOU CONFIRM: The MIL is ON with DTC P0448 (EVAP canister vent control valve close) stored in the ECM. ACTION: 1. Replace the EVAP canister (canister) and EVAP canister vent control valve (vent control valve). 2. Remove the canister filter. 3. Replace the fuel filler pipe and canister drain hose listed in PARTS INFORMATION. 4. Erase the DTC. Please see this bulletin for further details.
- 10192638SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
- 10192597SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer is capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
- 10192591SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail.
- 10192524SERVICE INFORMATION When diagnosing possible power steering gear (rack and pinion steering rack, or steering rack) leak issues, it may appear the steering rack is leaking when actually, it?s not. Use this service bulletin to help make a more accurate diagnosis of the steering rack. See this bulletin for further detail.
- 10192513SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
- 10192474SERVICE INFORMATION If a customer describes lack of power or poor acceleration, perform the following checks before attempting any repair: * Check for stored DTCs. * Check if the driver is resting their left foot on the brake pedal while accelerating. Advise the customer not to rest their foot on the brake while accelerating. * Use CONSULT-III plus in Engine Data Monitor to check operation of the brake lamp circuit signal. Monitor the brake switch during the incident; it should be "OFF". Please see this bulletn for further details.
- 10192394SERVICE INFORMATION Related to communication codes U1000, U1001, U1002, U1010: - Always diagnose the communication codes first. - When a module reports a U1000 code, it is typically operating normally; however, there is a communication error external to that module on the CAN network. - U1000 indicates an error. V-CAN diagram or CAN Diag Support Monitor provides data to determine the location of the error. See this bulletin for more information.
- 10192326SERVICE INFORMATION The specifications for the intake and exhaust valves and valve lifter service parts have been changed. * The valve stem length of both intake and exhaust valve has been increased (Figure 1) and are a direct replacement for the shorter style valve. * The related valve lifter cup has been shortened (Figure 2) and the point at which the valve lifter contacts the valve stem has been shortened (not shown). These service parts will require that the valve and valve lifter be replaced at the same time. See this bulletin for further details.
- 10192305SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192266SERVICE INFORMATION If one or more of these EVAP leak DTCs are stored (P0442, P0455, P0456) on a 2007 through 2011 Nissan vehicle, a loose fuel fill cap may be the cause. Use the following resources to perform diagnostics and confirm the cause of stored DTCs. ASIST: - Appropriate Service Manual diagnostic procedures - Applicable Technical Service Bulletins (TSB). Leak Test: - With CONSULT-III plus - WORK SUPPORT >> EVAP SYSTEM CLOSE. NOTE: Use Essential Tool J-42909 or equivalent to pressurize the EVAP system. - With a "Smoke" leak detection machine. Refer to the machine's Operator's Manual for proper use. Make sure the customer is informed of the proper fuel filler cap installation.
- 10192234Two methods are used to update/upgrade Navigation Map Data: 1. The customer goes to www.nissannavigation.com and is mailed update disc(s) or SD Card and installs data, OR 2. The dealership is mailed update disc(s) and the customer must visit the dealership to have data installed. Use the matrix in this bulletin to determine which method is utilized for each Applied Vehicle. See this bulletin for further detail.
Every Nissan Titan model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.