2010 Nissan Titan
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Nissan › Titan › 2010
These records cover every 2010 Nissan Titan. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2010 Nissan Titan. Newest first.
Nissan North America, Inc. (Nissan) is recalling certain 2008-2011 Titan, Frontier, Xterra, Pathfinder, Armada, and 2008-2009 Quest vehicles. The resin emblem on the driver's air bag cover may develop cracks and detach during air bag deployment.
Risk and remedy
Risk
A detached emblem can become a projectile during air bag deployment, increasing the risk of injury to vehicle occupants.
Remedy
Dealers will replace the drivers airbag cover. Owner letters were mailed December 8, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall are PC944, PC945, and PC946.
Nissan IS recalling certain front and rear lower links, p/nos. 54501Zq00a, 54500zq00a, 551a1zq00a, 551a0zq00a , 54501ea00a, 54500ea00a, 551a1ea500, 551a0ea500, 54501zr00a, and 54500zr00a, sold between november 25, 2009 and may 14, 2010 as replacement parts for model year 2004 through 2010 titan, armada, and QX56, and model years 2005 through 2010 frontier…
Risk and remedy
Risk
If the collar weld separates, the vehicle handling will deteriorate, possibly resulting in a vehicle crash.
Remedy
Nissan will notify owners and dealers will replace any affected lower link free of charge. the safety recall began on july 12, 2010. owners may contact nissan at 1-800-647-7261.
Nissan IS recalling certain model year 2010 titan, armada, QX56, frontier, xterra, and pathfinder vehicles manufactured from november 19, 2009 through march 3, 2010. the lower control link assembly has two cylindrical collars forming the inboard attachment points to the chassis. due to an improper welding process some collars may contain welds that do not…
Risk and remedy
Risk
If the collar weld separates, the vehicle handling will deteriorate, possibly resulting in a vehicle crash.
Remedy
Nissan will notify owners and dealers will repair the vehicles free of charge. the safety recall began on may 20, 2010. owners may contact nissan at 1-800-647-7261.
Nissan IS recalling certain model year 2008-2010 titan, armada, and infiniti QX56, and model year 2008-2009 nissan quest vehicles. the brake pedal pivot pin end was not spin-formed to specification during the manufacturing process of the brake pedal assembly. the pivot pin could slide and cause the brake pedal to partially disengage from the brake pedal…
Risk and remedy
Risk
The driver will experience unusual and noticeable looseness in the pedal and a reduction in braking force increasing the risk of a crash.
Remedy
Dealers will inspect to see if the pivot pin had been formed properly and will replace the brake pedal assembly if necessary free of charge. the safety recall began on march 22, 2010. owners may contact nissan at 1-800-647-7261.
Owner complaints
46 complaints3 involved a crash2 injuries
What owners report most
Latest complaints
- Steering › Rack and pinion › Mounting bracket
The contact owns a 2010 Nissan Titan. The contact stated that while driving 60 MPH, the wheels became squeaky, the vehicle made a knocking sound, and the steering wheel became difficult to turn. An unknown warning light was temporarily illuminated. The contact pulled over to the side of the road to…
The contact owns a 2010 Nissan Titan. The contact stated that while driving 60 MPH, the wheels became squeaky, the vehicle made a knocking sound, and the steering wheel became difficult to turn. An unknown warning light was temporarily illuminated. The contact pulled over to the side of the road to inspect the vehicle and discovered that the rack and pinion had detached from the mounting bracket and fallen onto the skid plate. An independent mechanic was contacted by phone. The failure mileage was approximately 100,000.
- Fuel/propulsion system
Vehicle showed over a quarter tank of fuel and shut off unexpectedly in a corner.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip › Abs warning light · Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings
The contact owns a 2010 Nissan Titan. The contact stated that after reversing out of a parking space, while depressing the brake pedal, the brake pedal went to the floorboard. The contact was able to bring the vehicle to a complete stop by engaging the parking brake and shifting the vehicle into…
The contact owns a 2010 Nissan Titan. The contact stated that after reversing out of a parking space, while depressing the brake pedal, the brake pedal went to the floorboard. The contact was able to bring the vehicle to a complete stop by engaging the parking brake and shifting the vehicle into park. After a visual inspection, the contact observed a hole in the driver's side brake line. The traction control and brake warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic to be diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 21,000.
- Air bags
The contact owns a 2010 Nissan Titan. The contact received notification of NHTSA Campaign Number: 23V067000 (Air Bags), however the part to do the recall repair was unavailable. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Air bags
Out of no where my air bag light came on. I took it to a shop and they checked it with a machine. They said it was the clock spring and that part is on back order and has been for months.
- Service brakes
When driving and pressing on brake pedal the brakes do not engage. If you let go of the pedal and reapply it will start breaking. But they don't work frequently.
- Unknown or other
Clear coat IS delaminating under the paint in about 10 spots.
- Visibility/wiper
Poor defroster performance on drivers side windshield at all times due to actuator failure. Part cost less than $35.00 shop labor quoted $1,300.00. Few owners can afford the repair. Poor design of actuator
- Air bags
My air bag light keeps blinking the whole time my truck IS on.
- Power train
TL* the contact owns a 2010 nissan titan. While driving approximately 15-30 mph, the rear differential seized without warning. The vehicle was towed to the contact's residence where the contact performed a self diagnostic test on the vehicle. The contact stated that the main pinion gear failed…
TL* the contact owns a 2010 nissan titan. While driving approximately 15-30 mph, the rear differential seized without warning. The vehicle was towed to the contact's residence where the contact performed a self diagnostic test on the vehicle. The contact stated that the main pinion gear failed, which sent metallic components and gear oil onto the roadway. The vehicle was repaired. Future nissan of folsom (located at 12610 auto mall cir, folsom, ca 95630, (877) 635-4447) was notified of the failure. The manufacturer was not notified of the failure. The approximate failure mileage was 68,500.
- Power train › Driveline › Differential unit · Service brakes
TL* the contact owns a 2010 nissan titan. The contact stated that a pin and a spider gear fractured in the rear of the vehicle. Also, the rear brakes did not work and the vehicle did not accelerate. The vehicle was purchased at open road motorsports (1175 village way, monroe, wa 98272, (360)…
TL* the contact owns a 2010 nissan titan. The contact stated that a pin and a spider gear fractured in the rear of the vehicle. Also, the rear brakes did not work and the vehicle did not accelerate. The vehicle was purchased at open road motorsports (1175 village way, monroe, wa 98272, (360) 489-6556) two months ago. The dealer was contacted and stated that they could not assist. The manufacturer stated that there was no recall and they could not assist. The vehicle was not diagnosed or repaired. The failure mileage was 86,000.
- Electrical system
Whether stationary or moving, the ac blower, defrost, etc won't work as it always runs cold and does not blow any hot air to defrost windows. This IS especially problematic when car IS foggin up on the inside and the defrost won't blow any hot air. Cabin of truck IS especially cold now as it won't…
Whether stationary or moving, the ac blower, defrost, etc won't work as it always runs cold and does not blow any hot air to defrost windows. This IS especially problematic when car IS foggin up on the inside and the defrost won't blow any hot air. Cabin of truck IS especially cold now as it won't blow any hot air. There IS a clicking sound when tying to turn the ac/heater control knob, like the blower door IS stuck or the motor can't turn the door to let the hot air in.
- Engine and engine cooling › Exhaust system › Manifold/header/muffler/tail pipe
TL* the contact owns a 2010 nissan titan. While driving, exhaust fumes entered the cabin of the vehicle. The vehicle was taken to an independent mechanic who diagnosed that the exhaust manifold detached and needed to be replaced. The vehicle was not repaired due to the repair fees. The vehicle was not taken to a dealer. The manufacturer was not notified of the failure. The approximate failure mileage was 130,000.
- Electronic stability control (esc) · Exterior lighting · Service brakes
Takta recall I have recently had many malfunctions with my truck. Shift interlock, ipdm, brakes are locked. Transmission wont shift, no brake lights, stereo does not work, ac system not working properly, back doors don't want to open, air bag light flashes backed truck in drive way. Got out for a few minutes. Got back in to move it and it would not go in gear. Then I noticed all of these other problems
- Steering
TL* the contact owns a 2010 nissan titan. The contact stated that the clock spring was faulty and could prevent the air bag from deploying. As a result, the steering wheel had to be held at a certain angle in order for the horn to work properly. The air bag warning indicator illuminated after the…
TL* the contact owns a 2010 nissan titan. The contact stated that the clock spring was faulty and could prevent the air bag from deploying. As a result, the steering wheel had to be held at a certain angle in order for the horn to work properly. The air bag warning indicator illuminated after the failure. Benton nissan of hoover (1640 montgomery hwy, hoover, al 35216) was notified. The vehicle was not diagnosed or repaired. The manufacturer was not notified. The vin was unknown. The approximate failure mileage was 150,000.
- Power train
Rear axle bearing failure in motion on a city street.
- Engine · Vehicle speed control
2010 nissan titan pro-4x uncontrollably accelerated without driver input, resulting in a collision. I was driving down an aisle in a parking lot and began to apply the brake to slow down and turn left into a parking stall. Just as my vehicle was about to come to a stop and park, the engine revved…
2010 nissan titan pro-4x uncontrollably accelerated without driver input, resulting in a collision. I was driving down an aisle in a parking lot and began to apply the brake to slow down and turn left into a parking stall. Just as my vehicle was about to come to a stop and park, the engine revved (it felt/sounded like full throttle), the tires squealed and launched the vehicle forward resulting in a collision with a vehicle parked in the opposite stall. Because my foot was already on the brake pedal I managed to quickly depress it all the way and at least reduce the severity of the impact. To date, this IS the first and only occurrence of a problem associated with vehicle speed control/accelerator.
- Service brakes
While driving all lights come on (ABS vdc and others) and the car does not brake. it appears to rapair itself after turning the car off and on
- Wheels
Wheel bearings and brake failure. car makes grinding noise and all lights (ABS, vdc) comes on and the car does not brake.
- Engine · Fuel/propulsion system
Exhaust manifold crack causing fumes to enter cab of truck while running.
- Air bags · Electrical system
I recently had air bag light start flashing. I took in to nissan dealer to get checked and they said the "spiral cable" was bad, this IS also known as clock spring. Nissan reset and said bring back if occurs again. It did and I took to another shop for second opinion and same result. I agreed to…
I recently had air bag light start flashing. I took in to nissan dealer to get checked and they said the "spiral cable" was bad, this IS also known as clock spring. Nissan reset and said bring back if occurs again. It did and I took to another shop for second opinion and same result. I agreed to get part to fix the truck. After being told part was on back order no eta on delivery of parts from nissan. After 4 weeks I checked and found out the same dealer has 6 other "spiral cables" on back order. as I stand now, according to nissan my trucks driver side air bag will not deploy if needed, and no eta on parts.
- Air bags · Seat belts
While driving on my property, my 2010 nissan titan's side curtain airbags deployed the vehicle was not in any auto crash it did not roll or anything nothing was hit.
- Visibility/wiper
The heater failed to work. on cold frosty mornings, I could not use my front window defroster because it failed to blow hot air. this could cause an accident because a driver cannot see out a frosted window. the water valve that controls movement of hot engine coolant into the heater core needed…
The heater failed to work. on cold frosty mornings, I could not use my front window defroster because it failed to blow hot air. this could cause an accident because a driver cannot see out a frosted window. the water valve that controls movement of hot engine coolant into the heater core needed replaced to work properly. the service technician admitted that he has a to replace many of these electronic water valves. it sounds like there might be a nationwide problem with electronic water valves failing....updated 12/03/15 *bf updated 05/21/18*jb
- Engine and engine cooling › Exhaust system › Manifold/header/muffler/tail pipe
TL* the contact owns a 2010 nissan titan. The contact stated while driving approximately 20 mph, an abnormal sound emitted from the front end of the vehicle. The contact smelled fumes from the exhaust pipe. The failure recurred multiple times. The vehicle was taken to a dealer for diagnostic…
TL* the contact owns a 2010 nissan titan. The contact stated while driving approximately 20 mph, an abnormal sound emitted from the front end of the vehicle. The contact smelled fumes from the exhaust pipe. The failure recurred multiple times. The vehicle was taken to a dealer for diagnostic testing. The technician diagnosed that the exhaust manifold was fractured and need to be replaced. The manufacturer was made aware of the failure. The approximate failure mileage was 82,000.
- Electrical system
Clicking noise coming from dash when switching from defrost to vent, then again after vehicle has shut off (last 10-20 seconds worth of "ticking" noise ), has done this since I had purchased it. now there IS no heat when heater IS turned on, blows cold air. In reading forums, I am not the only…
Clicking noise coming from dash when switching from defrost to vent, then again after vehicle has shut off (last 10-20 seconds worth of "ticking" noise ), has done this since I had purchased it. now there IS no heat when heater IS turned on, blows cold air. In reading forums, I am not the only one. this needs to be recalled. I saw the voluntary service campaign, but in talking with my nissan dealer, they say this only goes until 72K. kind of convenient when im at 73K.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 110090672004 - 2015 TITAN; VIBRATION AT 40 50 MPH This bulletin is no longer active. Please discard previous versions of NTB17-110.
- 11007000VOLUNTARY SAFETY RECALL CAMPAIGN 2004-2012 ARMADA, TITAN, AND 2004-2009 QUEST; DRIVER AIR BAG COVER CAMPAIGN ID #: PC944, PC946, PC947, PC949 APPLIED VEHICLES: 2004-2012 Armada (TA60) 2004-2009 Quest (V42) 2004-2012 Titan (A60) Check Service COMM or Dealer Business Systems (DBS) National Service History to confirm campaign eligibility. INTRODUCTION Nissan is conducting this voluntary safety recall campaign on certain specific model year 2004-2012 Armada, 2004-2012 Titan, and 2004-2009 Quest vehicles, to inspect and if necessary, replace the driver Air Bag Cover. This service will be performed at no charge to the customer for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification numbers PC944, PC946, PC947 and PC949 to this campaign. The vehicle specific number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealers responsibility to check Service COMM or Dealer Business Systems (DBS) National Service History for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealers inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed. This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004962VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004961CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11004960CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001201WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001194REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001191WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10243708DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10239062SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
- 1023906012 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect Test with DCA and Replace results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
- 10235710INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
- 10235707VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10233896ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232658REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232657WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232656WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232652DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208953DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208946CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10206391STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10200013VOLUNTARY SERVICE CAMPAIGN 2009-2011 TITAN AND 2010-2011 ARMADA; FRONT A/C ACTUATOR MOTOR Service Campaign ID # PC090 is no longer active. Repair orders opened after this bulletins published date are no longer eligible for reimbursement under Campaign ID # PC090. Discard all previous versions of NTB11-040.
- 10199142VOLUNTARY SERVICE CAMPAIGN 2010 4WD NISSAN ARMADA, FRONTIER, PATHFINDER, TITAN, XTERRA; FRONT PROPELLER SHAFT Service Campaign ID # PC036 is no longer active. Repair orders opened after this bulletins published date are no longer eligible for reimbursement under Campaign ID # PC036. Discard all previous versions of NTB10-021.
- 10192840SERVICE INFORMATION Temporary tire Flat Spotting is common on New Dealer In-Stock vehicles that have not been occasionally moved. Flat Spotting can occur after the vehicle has been parked (not moved) for a few days, or longer. In most cases it is temporary. In extreme cases it can be permanent. Vehicles should be moved every 30 days, in one direction only, enough to rotate the tires 90 (see Figure 1). Moving vehicles as shown will prevent tire Flat Spotting. See this bulletin for further detail.
- 10192821SERVICE INFORMATION Replacement 5-speed rear wheel drive Automatic Transmission (A/T) assemblies and replacement control valves (valve bodies) now come with blank Transmission Control Modules (TCMs). Blank TCMs come without software and must be programmed (not reprogrammed) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Nissan electronic parts information systems to obtain the correct software program part number See this bulletin for further detail.
- 10192805IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location. ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. See this bulletin for further detail.
- 10192801SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- 10192747IF YOU CONFRIM An oil leak at the right side block ball plug behind the alternator. ACTION Use a punch to seat the block ball plug in the hole (refer to the Service Procedure). NOTE - Do not replace the engine block for this incident if it should occur. See this bulletin for further detail.
- 10192727SERVICE INFORMATION The purpose of this bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
- 10192707SERVICE INFORMATION The Intelligent Keys used on the various Nissan vehicles may not be interchangeable between models and years. See this bulletin for further detail.
- 10192679SERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be initialized. See this bulletin for further details.
- 10192677SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulletin for further details.
- 10192642IF YOU CONFIRM: The MIL is ON with DTC P0448 (EVAP canister vent control valve close) stored in the ECM. ACTION: 1. Replace the EVAP canister (canister) and EVAP canister vent control valve (vent control valve). 2. Remove the canister filter. 3. Replace the fuel filler pipe and canister drain hose listed in PARTS INFORMATION. 4. Erase the DTC. Please see this bulletin for further details.
- 10192638SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
- 10192615SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure proper vehicle operation. However, certain normal operating conditions can be misdiagnosed as a leak requiring repair. Unnecessary repair or replacement of parts in connection with incorrectly diagnosed "leaks" can negatively impact customer satisfaction, be time consuming and costly, and if not performed correctly can lead to future repairs. See this bulletin for further detail.
- 10192597SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer is capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
- 10192591SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail.
- 10192562SERVICE INFORMATION The applied vehicles are equipped with automatic door locks that lock all doors when the vehicle speed reaches 15 MPH. There is no instruction in the Owner?s Manual on auto-lock function deactivation. All doors unlock automatically when the ignition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system). The auto-unlock function can be deactivated by the driver in accordance with Owner?s Manual Instructions. Please see this bulletin for further details.
- 10192532SERVICE INFORMATION NOTE - Failure to follow the procedures in this bulletin may result in the denial of a warranty claim. In an effort to protect the paint finish, Paint Guard Film (PGF) is applied on many new Nissan vehicles. Paint Guard Film is a temporary white plastic protective film that is applied by the factory to the horizontal painted surfaces of the vehicle. The PGF protects the paint finish during vehicle handling, transportation and storage from harmful elements such as acid rain, iron particles, bird droppings, tree sap and other environmental contaminants. NOTE - Paint Guard Film CANNOT remain on the vehicle for more than six months after the vehicle's manufacture date. PGF must be removed at the end of six months. See this bulletin for further detail.
- 10192524SERVICE INFORMATION When diagnosing possible power steering gear (rack and pinion steering rack, or steering rack) leak issues, it may appear the steering rack is leaking when actually, it?s not. Use this service bulletin to help make a more accurate diagnosis of the steering rack. See this bulletin for further detail.
Every Nissan Titan model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.