1995 Toyota 4 Runner
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › 4 Runner › 1995
These records cover every 1995 Toyota 4 Runner. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 1995 Toyota 4 Runner. Newest first.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Ck motorsport will notify owners and replace the noncompliant lamps free of charge. the recall began on july 1, 2006. owners may contact ck motorsport at 1-909-610-7211.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
On certain pickup trucks and sport utility vehicles, if the steering wheel IS repeatedly turned under certain conditions where high steering effort and power assist are required, for instance, when fully turning the wheel while the vehicle IS stopped, a fatigue crack may develop in the steering relay rod.
Risk and remedy
Risk
If the vehicle IS continued to be operated in this condition, the relay rod may fracture, increasing the risk of a crash.
Remedy
Dealers will replace the steering relay rod. the recall began october 5, 2005. owners may contact toyota at 1-800-331-4331.
Owner complaints
172 complaints14 involved a crash17 injuries1 deaths
What owners report most
Latest complaints
- Engine
Engine, no sign of overheating ... Overheated within 3 months of ownership on my way to work with my wife's Conclude the headgaskets were blown. Toyota doesn't acknowledge recall. . Plus send a recall for v6 4runners headgaskets
- Engine
Blown head gasket on 3.0 V-6
- Engine · Unknown or other
May 2015 on way to drs and then oil change at pep boys. Head gasket on car blew for 2ND time (6000 and 2 years, since first time). Driving on freeway proceeded to overpass and in the middle of this extremely high, curved overpass, bridging the 23 to the 101, driving at highway speed, the car…
May 2015 on way to drs and then oil change at pep boys. Head gasket on car blew for 2ND time (6000 and 2 years, since first time). Driving on freeway proceeded to overpass and in the middle of this extremely high, curved overpass, bridging the 23 to the 101, driving at highway speed, the car "farted", cloud out back side and speed just dropped. Coasted down other side and car "limped along slowly" from there. Most terrifying experience. Prayed no one would hit me and send me flying off the connector to freeway below. I had no problem with car prior, running beautiful. Took the grades, highway, passing street driving. No problem. back to issue: luckily, no cars immed. Behind me and those coming were far enough to and could use l lane. Was able to get off freeway. Car,died at every light, but made it slowly, to pep boys. They said head gasket blew. please note this was a relatively newly repaired head gasket. Repaired 2/16/2013 done @ 160,227. Was gifted car in nov 2013 by family member with meticulous records and spot on reg maintenance of this vehicle. Here I am at the 166,265 and for some reason again the head gasket IS incapable of function with the specs of the vehicle. Went with a re-manufactured engine, by certified engine repair only facility, but since the big bang. The car has an unidentifiable speed issue. Can hit up to 80- 85 on hwy, (runs almost beautifully, again but passing power, varies, does hill and then, it doesn't. Loosing speed/power foot to the floor. Then running beautifully. had 39 point inspection aaa. 4/1/16 passed shifting/engine cranking/ handling etc, does not follow any, if then, you will notice, no engine, od, warning lights. Loss of dash function, rpm , speedometer, gage functions...came here and found out not only one who's engine blew way before its time, again have complete care repair history and maintenance records.
- Engine
Toyota 4runner 1995 blown head gaskets
- Engine
My head gasket IS blown. The dummy panel did not show overheating but steam or smoke was visible coming out from under the hood. Coolant was leaking when parked but the radiator IS full. Toyota says my vin says it was manufactured in nov 1995 my registration paperwork says it was first registered…
My head gasket IS blown. The dummy panel did not show overheating but steam or smoke was visible coming out from under the hood. Coolant was leaking when parked but the radiator IS full. Toyota says my vin says it was manufactured in nov 1995 my registration paperwork says it was first registered october 1995. As with many others, toyota says it IS not included. How many reports must be made before it IS a covered problem? Or IS there no change til lawyers get involved? *tr
- Engine
Engine exhaust smoky. Coolant level drops. Steam and water emitted from exhaust pipe. Cause seems to be due to a failed head gasket(s) or failure of aluminum cylinder heads to mate to cast iron engine block. other possibility IS cracking in water jacket of heads. this IS a 3.0 liter V6 engine…
Engine exhaust smoky. Coolant level drops. Steam and water emitted from exhaust pipe. Cause seems to be due to a failed head gasket(s) or failure of aluminum cylinder heads to mate to cast iron engine block. other possibility IS cracking in water jacket of heads. this IS a 3.0 liter V6 engine and has had press releases about gasket failures. This vehicle was purchased new by customer and has never had the engine overheat or has it been run while low on engine lubricating oil.
- Engine
Blown rod . Bad motor .. The 4 runner had a 4 wheel drive engine in it that came stock in a 2 wheel drive 4 runner? it blew out a rod on me and these SR5 motors are suppose to last a long time? 98,432 IS low for me. *tr
- Engine
I do not own this vehicle anymore as I needed a reliable vehicle to make it to arizona from iowa. I also had a cobalt I had to get rid of with bad transmission and steering rack (prior to recall of steering racks). I do not have storage capability for junk vehicles. this toyota had a blown head…
I do not own this vehicle anymore as I needed a reliable vehicle to make it to arizona from iowa. I also had a cobalt I had to get rid of with bad transmission and steering rack (prior to recall of steering racks). I do not have storage capability for junk vehicles. this toyota had a blown head gasket at 90000 miles like all the other 10 years worth of recalled 4runner 3VZ-E engines. but conveniently for toyota they forgot to include 95. there IS no way a car company redesigns an engine they were phasing out in 4 months. needed gasket replaced but not covered under recall. toyota said too bad, so sad, our reputation relies on quality vehicles. bbb said it IS up to the car company to be responsible for their vehicles, i.e. We do not care. I got $0.00 for trade in on it. the cobalt I also took a $1000 loss since I only had it 4 months and traded it in with 42000 miles (bought at 37000). *js
- Unknown or other
The head gasket IS going out there IS a recall for other mfg dates but mine was 1 month too long and other people complaining on the internet about their 95 4runners with blown head gaskets and toyota telling them to go pound sand.toyota IS even having later model V6S with failing head gaskets the…
The head gasket IS going out there IS a recall for other mfg dates but mine was 1 month too long and other people complaining on the internet about their 95 4runners with blown head gaskets and toyota telling them to go pound sand.toyota IS even having later model V6S with failing head gaskets the motor its self IS the problem the design IS not perfect it's cooling problem IS the cause of the sledge recalls they have going on. But if they admit that the motor IS bad it would cost them a arm and a leg so me and a lot of other people are left holding the crappy cars tail pipe what worries me IS it stopping in the middle of the freeway then getting rear ended. *js
- Engine and engine cooling
I bought a regularly maintained, used 1995 4 runner with 119,000 miles. Within a month, it began running poorly and the repairs began. Had to have the truck towed numerous times after it left me stranded with my infant child. I have replaced everything possible but now the mechanic tells me I have…
I bought a regularly maintained, used 1995 4 runner with 119,000 miles. Within a month, it began running poorly and the repairs began. Had to have the truck towed numerous times after it left me stranded with my infant child. I have replaced everything possible but now the mechanic tells me I have a blown head gasket. There was no incident of overheating. I have seen enough complaints about this issue to understand that toyota IS aware and refuses to rectify this situation. I was told by toyota customer service that my truck IS not on the recall list. Why not? Every other year was recalled for the very same problem. I cannot afford this repair and since this vehicle has 'nickel and dimmed' me to death, it sits in the driveway. I can't fix it, can't sell it, can't trade it in. It was a waste. My husband's car has been a real trooper but it needs repairs. The 4 runner has taken so much, we can't even fix the basics on hubby's car. just want to know when toyota IS going to admit the problem and help us all that are stuck with their mess! *tr
- Engine and engine cooling
TL* the contact owns a 1995 toyota 4runner. While driving 25 mph, the contact noticed smoke coming from the tail pipe and the vehicle began driving erratically. The engine was turned off but would not restart after four to five attempts. When restarted, there was thick white smoke coming from the…
TL* the contact owns a 1995 toyota 4runner. While driving 25 mph, the contact noticed smoke coming from the tail pipe and the vehicle began driving erratically. The engine was turned off but would not restart after four to five attempts. When restarted, there was thick white smoke coming from the tail pipe abnormally. The vehicle was taken to a mechanic and after inspecting the vehicle, the mechanic noticed that the head gasket was fractured. The manufacturer was contacted and offered no assistance. The vehicle was not repaired. The failure mileage was 179,000.
- Power train › Manual transmission
Clutch pedal sticking to floor truck would not shift till you pull pedal back up. Then it fine till it would do it again. It had new clutch put in after nothing helped. It was not the clutch. It still done it .lines bleed many times. Different weights of fluid did not help .pedal assembly taken…
Clutch pedal sticking to floor truck would not shift till you pull pedal back up. Then it fine till it would do it again. It had new clutch put in after nothing helped. It was not the clutch. It still done it .lines bleed many times. Different weights of fluid did not help .pedal assembly taken apart cleaned and gone over .did not help .new slieve did not help .it might be 2 minutrs or 2 months between sticking.if truck was in gear when pedal stuck it would take off like bat out of hall. Standing on brake with both feet would not stop truck.had to turn motor off to stop truckthen pull pedal back up .then I saw one day the pedal sucked itself to the floor.it was pulling itself to the floor then take off if in gear.maybe other people who think pedal IS sticking may be wrong mine sucked itself to the floor.i but dangerous I almost rear ended people at stop lights before I could get motor turned off. *tr
- Engine and engine cooling › Engine
Vehicle with 3.0L V6 has blown two head gaskets in 135,000 miles. Vin IS just outside of the "special service campaign". Gasket failed (again) with no warning, vehicle stalled in the middle of highway in inclement weather, driver lost control
- Engine and engine cooling
I've talked with toyota about the head gasket recall on this 4runner , and I've been told yes they will fix the head gasket but only if I pay for any other repairs to the engine and they tell me they will only do it under these conditions. IS this true or are these dealerships trying to extort money from me . I just want the head gasket fixed all other IS my responsibility and I will repair the other myself.
- Engine and engine cooling · Engine and engine cooling › Cooling system · Engine and engine cooling › Engine
I have read hundreds of stories similar to mine - yet toyota IS telling me my vin does not qualify for the special service campaign aka: recall. Although I do have an official letter stating that all toyota 3VZ-E engines qualify. . my story: last week, I was driving home from work and my 1995 V6…
I have read hundreds of stories similar to mine - yet toyota IS telling me my vin does not qualify for the special service campaign aka: recall. Although I do have an official letter stating that all toyota 3VZ-E engines qualify. . my story: last week, I was driving home from work and my 1995 V6 3.0L efi (3VZ-E engine) began to overheat. Suddenly a cloud of white smoke emerged from beneath the hood and I lost all power. I pulled over on the shoulder, lifted the hood to find the radiator cap severed from the radiator and antifreeze/boiling water spraying everywhere - I let it cool but had a difficult time starting it. Eventually I was able to get it to a mechanic shop about 7 miles away.. Blown head gaskets #6 cylinder IS not firing. This IS clearly a class action suit in the making! *Tr
- Power train › Driveline
1995 toyota 4runner front driveshaft disconnected from transmission while driving in freeway. *Tr
- Engine and engine cooling › Engine
Properly cared for 1995 4runner blew head gaskets. looking at approx. $2K repair. toyota recall for this problem ends at man. Date of 10-94. they won't cover the same problem that has apparently happened to hundreds of 95 owners. *Tr
- Tires
Tires bought from sears auto center 31x10.50x15 general all train l/ts were brought in for rotation & balance regular (2X) .tires are weather cracking in the treads , tires were 2 years old when bought never told now they won't do nothing half tread on tires it IS all way's parked in garage. Need your help! *Tr
- Power train
I believe, thought, swear I set my 1995 toyota 4runner in the park position. I received a call from security informing me it rolled and hit another vehicle. I found my vehicle and observed that the SUV was not in park, but the drive. how IS this possible? I shouldn't be able to take the key…
I believe, thought, swear I set my 1995 toyota 4runner in the park position. I received a call from security informing me it rolled and hit another vehicle. I found my vehicle and observed that the SUV was not in park, but the drive. how IS this possible? I shouldn't be able to take the key out of the ignition while the lever IS in the drive position. according to the manual, "on vehicles with auto transmission, the selector lever much be put in the "p" position before turning the key to "lock" position. "lock" - engine IS off and the steering wheel IS locked. the key can be removed only at this position." this IS not the first time I've been able to take the key out of the ignition while the lever IS in drive position. I make a conscious effort to make sure it's in park before removing the key. *Tr
- Structure › Frame and members
I have a 1995 toyota 4-runner that has frame rust so bad that the wheel fell off while my son was driving it. at that time we were advised by a mechanic that the vehicle IS unsafe to drive. we are the original owners, it was garaged and well maintained throughout the years. I have contacted a…
I have a 1995 toyota 4-runner that has frame rust so bad that the wheel fell off while my son was driving it. at that time we were advised by a mechanic that the vehicle IS unsafe to drive. we are the original owners, it was garaged and well maintained throughout the years. I have contacted a local toyota dealer as well as the corporate offices since they have a buy back program for the same year truck with the same rust problem but have gotten nowhere. *Tr
- Engine and engine cooling › Cooling system · Engine and engine cooling › Engine
Blown head gasket on 1995 toyota 4runner 4X4 with V-6 engine. I see recall information for 91,92, 93, 94, and 96. what about 95. I have talked with others that have had same problem with this year. *Tr
- Engine and engine cooling
Blown head gasket on 1995 4 runner. happened in 2/2009. Toyota has had recalls on head gaskets for 1995 4 runners but has claimed this vehicle was not covered. many many other owners are experiencing the same problem see: http://www.carsurvey.org/viewcomments_review_45660.html requires head gasket replacement - toyota won't cover it. *Tr
- Engine and engine cooling
I own a 1995 4 runner # with one of your 3.0 motors in it and it only has 107,000. Miles on it. the head gasket blow out on it, it started eating coolant. I have called your customer service department case # 200812190092 with no regards to my problem, I was blown off just like the head on this…
I own a 1995 4 runner # with one of your 3.0 motors in it and it only has 107,000. Miles on it. the head gasket blow out on it, it started eating coolant. I have called your customer service department case # 200812190092 with no regards to my problem, I was blown off just like the head on this motor, blown off. I have owned 4 toyota?s including new camry's, my parents both drive toyota's. the 4runner IS now sitting in my drive while the snow IS piling up around it, I bought it to drive in the winter, I'm left driving my car. I want this fixed by you ( toyota) you know you have a design flaw with this motor. contact me asap to resolve this problem. This IS not a problem that you can walk away from, there are to many occurrences. I will let this truck set in my yard with a sign on it that tells all who drive by it that toyota will not stand behind their products-blown head gasket at 107000 miles. I want an answer as to when you will get my truck repaired at your cost, not mine. call today if you would like to resolve this matteror thank you for your time. have a great day. kb *tr
- Electrical system · Exterior lighting
1995 toyota 4runner losses electrical power and strange ticking noise under the front end when it does it. no brake lights. No motor powerand etc........ *Tr
- Engine and engine cooling
Driving down the road at 40 mph and car started blowing white smoke. Was told it was a blown head gasket. Car has 124,500 miles. Currently do not have money to repair and IS driven sparingly. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Corroded brake lines
Toyota IS conducting a safety recall in canada 98-253. Corroded brake lines could fail resulting in a partial brak system loss and increased stopping distances
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10153239Dealer package: 12/18/2018 the program details section has been updated. Special policy adjustment for 1988 - early 1990 truck & 4runner with 3VZ?E V6 engines and special service campaign (V06) for 1990 - early 1995 truck, 4runner & T100 with 3VZ?E V6 engines.
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
- 10133649TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10132084The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
- 10131993This bulletin is now obsolete. Please see T-SB-0185-13.
- 10131988The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
- 10131984A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
- 10131713TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
- 10123420TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
- 10111390TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10111197TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10109492TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
- 10109404TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
- 10061620Summary to be provided on a future date.
- 10061578Summary to be provided on a future date.
- 600350Subject regarding cylinder head installation for vehicles equipped with the 3VZ V6 engine.
Every Toyota 4 Runner model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.