2022 Toyota 4RUNNER

Recalls

3 recalls name the 2022 Toyota 4RUNNER. Newest first.

• Equipment › Other › Labels

  Jul 6, 2022NHTSA 22V480000280 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain 2020-2022 4Runner vehicles equipped with 20-inch Black Gunner Wheels. The load carrying capacity modification labels are incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

  Risk and remedy

  Risk

  An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

  Remedy

  SET will mail replacement labels to owners, free of charge. Owner notification letters are expected to be mailed September 4, 2022. Owners may contact SET's customer service at 954-429-2000. SET's number for this recall is SET22A.

  Full recall details →

• Equipment › Other › Labels

  May 6, 2022NHTSA 22V310000661 vehicles

  Gulf States Toyota, Inc. (GST) is recalling certain 2022 4Runner, Tacoma, Highlander, and Highlander Hybrid vehicles. The load carrying capacity modification labels may not be permanent and can fade, becoming illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and…

  Risk and remedy

  Risk

  An illegible label may allow the vehicle to be overloaded, increasing the risk of a crash.

  Remedy

  GST will notify owners by mail, including a replacement load carrying capacity modification label for their vehicle and detailed replacement instructions, free of charge. Owner notification letters were mailed June 30, 2022. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 22R1.

  Full recall details →

• Exterior lighting › Headlights

  Dec 13, 2021NHTSA 21V96300078 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain 2022 Toyota 4Runner vehicles. The driver's side high beam may be inoperable after the installation of accessory fog lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."

  Risk and remedy

  Risk

  An inoperable driver's side high beam may reduce visibility, increasing the risk of a crash.

  Remedy

  Dealers will install an updated wiring harness, free of charge. Owner notification letters were mailed February 11, 2022. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET21A.

  Full recall details →

Owner complaints

What owners report most

1. Forward collision avoidance7
2. Unknown or other7
3. Air bags6
4. Suspension6
5. Service brakes5
6. Seat belts4
7. Steering4
8. Lane departure3
9. Vehicle speed control3
10. Wheels2

Latest complaints

• May 16, 2026OH
  Seat belts

  Drivers side seat belt jammed and will not pull out and work properly. Can not use seat belt.

• Mar 18, 2026MO
  Suspension
  I felt an unnatural vibration and roll to one side of the vehicle when slowing around a curve on the highway which affected my ability to control the vehicle as expected, so I took it to a mechanic specializing in Toyota. The XREAS suspension system has already failed at 36,000 miles and Toyota is…

  I felt an unnatural vibration and roll to one side of the vehicle when slowing around a curve on the highway which affected my ability to control the vehicle as expected, so I took it to a mechanic specializing in Toyota. The XREAS suspension system has already failed at 36,000 miles and Toyota is refusing to assist since this is out of warranty. However, this is a known issue that you can see many many people are affected by with a quick internet search, and multiple Toyota certified mechanics can confirm this is an issue they see an inordinate amount of failures on. This is a very well publicly documented issue with the XREAS suspension. The XREAS has suffered from early failure for years and Toyota has not and is not addressing it, these vehicles should all be recalled and repaired as they are a danger to the public having cars with non-functional and unsafe suspensions, a critical system for safety in any automobile. Not only are the owners of these vehicles affected, the general public is being put at risk by drivers unknowingly commuting without fully functional suspensions or even being unaware their vehicle may not even pass a basic safety inspection. These are not parts any consumer should or could reasonably expect to fail so early, this is recall worthy based on the danger to public but Toyota clearly will have to be forced to do so. At the very least Toyota should be telling people to lookout for this, it is a safety issue they are trying to avoid. I will replace my own soonest possible because I want to be responsible, unfortunately Toyota is not sharing that want and is instead leaving American citizens at risk of injury and death by knowingly producing and shipping faulty suspensions on one of their best selling vehicles.

• Feb 24, 2026MO
  Steering

  Steering shake at 55mph, seems to go away after tires have warmed up. Tried road force balance with no help.

• Jan 27, 2026FL
  Back over prevention › Sensing system › Camera

  I am not sure this qualifies but I will submit the problem. All of a sudden, the center console display disappeared. Besides showing the radio tuner, it provides access to the GPS, cell phone connection and other devices. It also provides access to the backup camera which does light up when put in reverse. The cell phone connection provides hands free use of the phone which comes in handy during an emergency.

• Jan 13, 2026WA
  Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Automatic emergency braking · Vehicle speed control
  This had happened a year ago. I was driving and my anti collision brake just started to make a beeping noise and was telling me to call a toyota dealer. And before that the anti collision brake would go off when there was nothing in front of me. A few months later my cruise control and lane assist…

  This had happened a year ago. I was driving and my anti collision brake just started to make a beeping noise and was telling me to call a toyota dealer. And before that the anti collision brake would go off when there was nothing in front of me. A few months later my cruise control and lane assist also stopped working. I took it in for a diagnostic and they couldn't tell me the real problem and that it would be 1500 to actually know what the issue is. I have never been in an accident in this car and its annoying that I bought it because of the safety features that I now cant use.

• Oct 20, 2025AL
  Unknown or other

  The back up camera does not work sometimes. The screen is black.

• Sep 24, 2025TX
  Engine
  I am writing to formally report a concerning issue with my 2022 Toyota 4Runner, which currently has approximately 22,000 miles. The vehicle is regularly serviced at a certified oil change facility, and during routine use, I noticed a puddle of oil forming in my driveway. Upon contacting the…

  I am writing to formally report a concerning issue with my 2022 Toyota 4Runner, which currently has approximately 22,000 miles. The vehicle is regularly serviced at a certified oil change facility, and during routine use, I noticed a puddle of oil forming in my driveway. Upon contacting the service center, I was advised to bring the vehicle in for inspection. The technician identified a crack in the OEM plastic oil filter housing, which was causing engine oil to leak. I was informed that this is a known issue the technician has encountered on multiple Toyota vehicles equipped with the same plastic housing. To resolve the issue, I purchased a replacement OEM aluminum oil filter housing, which the technician installed. Since the replacement, the oil leak has ceased, and there have been no further incidents. I am concerned that the original plastic oil filter housing may be defective or prone to premature failure, potentially leading to engine damage or safety hazards. I respectfully request that this issue be investigated and considered for a recall or service bulletin, as it may affect other Toyota owners.

• Aug 24, 2025OH
  Suspension · Wheels

  70k mile tires only lasted 45k miles. Tires were worn on the insides after rotations every 5k miles. After changing tires, an alignment and inspection demonstrated the front struts were sagging. 4Runner equipped with XREAS.

• Jul 15, 2025FL
  Electrical system

  when turning the steering wheel several things happen. channels change, phone hangs up, GPS stops, air bag light comes on. Dealership inspected and said need to change spiral cable. $1200 dollars

• Nov 26, 2024NVCrash1 injury
  Air bags

  Neither the curtain airbags or steering wheel Air bags deployed after a very bad car accident. Super upset because this is the reason parents spend so much money to keep their kid safe. She banged her head on steering wheel and on window which should have been prevent by air bags on 2022 4Runner bought brand new

• Aug 22, 2024CA
  Service brakes

  Brake failure. Unable to stop vehicle. Dealer found internal brake failure

• Jul 22, 2024MI50,000 miCrash
  Air bags
  The contact owns a 2022 Toyota 4Runner. The contact stated while driving at an undisclosed speed, the contact's vehicle was involved in a head-on collision. The contact stated that the air bags did not deploy. Additionally, the contact stated that several unknown warning lights illuminated. The…

  The contact owns a 2022 Toyota 4Runner. The contact stated while driving at an undisclosed speed, the contact's vehicle was involved in a head-on collision. The contact stated that the air bags did not deploy. Additionally, the contact stated that several unknown warning lights illuminated. The contact's service dog accompanied the contact in the vehicle and was seated in the front passenger's seat. The contact sustained injuries and was transported to the local hospital. The contact received treatment for headaches, whiplash, and back pain. A Police report was filed, however, the information was unavailable. The contact stated that the service dog sustained injuries and was later treated for muscle tightness. The vehicle was towed to an independent mechanic for the physical damage to be repaired. The contact was advised to take the vehicle to the dealer regarding the air bag failure. The vehicle was towed to the dealer where it was diagnosed with sensory failure. The manufacturer was made aware of the failure. The contact was informed that the failure was not due to a manufacturer defect. The failure mileage was approximately 50,000.

• Jun 20, 2024OH
  Suspension
  The right CV joint traverses up and down. Once warmed up it loses concentricity and the steering wheel begins to shake. It does not stop until I pull off the highway The shake is completely gone when the vehicle is in 4 wheel drive. There are numerous complaints regarding this. I have taken it…

  The right CV joint traverses up and down. Once warmed up it loses concentricity and the steering wheel begins to shake. It does not stop until I pull off the highway The shake is completely gone when the vehicle is in 4 wheel drive. There are numerous complaints regarding this. I have taken it back to the dealer and participated in "road tests" and the steering did in fact shake and the tech stated "this is normal". This is not and it is hard to drive in a straight line. Google "4Runner steering wheel shake/wobble", thousands of complaints and Toyota refuses to replace the bearing. This is disappointing as it is covered for 6 years , 60,000miles under the powertrain warranty, yet the dealer is insistent on stringing me along until the warranty expires. The vehicle is available for inspection and I have videos to send as well if needed.

• Jun 10, 2024CA
  Other/i am not sure

  When the car seat is install rear facing with the seatbelt and using the lock off clip it becomes loose after a couple of uses.

• Jun 6, 2024MI76,000 miCrash1 injury
  Air bags
  The contact owns a 2022 Toyota 4 Runner. The contact stated that while driving at an undisclosed speed, the contact was in a single-car head-on collision. The contact stated during the collision there was an odor of the air bag deployment, however, the air bags did not deploy. The contact was…

  The contact owns a 2022 Toyota 4 Runner. The contact stated that while driving at an undisclosed speed, the contact was in a single-car head-on collision. The contact stated during the collision there was an odor of the air bag deployment, however, the air bags did not deploy. The contact was transported to the hospital due to their head hitting the steering wheel. The contact stated no other parties were involved. A police report was filed. The vehicle was towed to a dealer who confirmed the air bags had failed and needed to be replaced. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure mileage was approximately 76,000.

• May 30, 2024KY
  Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Warnings

  When raining or snowing it deactivated several times causing dangerous situations at high speed

• Jan 14, 2024FL
  Wheels
  Static tire failure of the left rear tire. OEM Nitto ridge grappler dot# [XXX] ; 265/70r17. Parked car and was inside a church for an hour. No issues with tire, all 4 tpms pressures read 37 psi. When returning to the vehicle noticed the flat, changed on the spot with the full size spare. It…

  Static tire failure of the left rear tire. OEM Nitto ridge grappler dot# [XXX] ; 265/70r17. Parked car and was inside a church for an hour. No issues with tire, all 4 tpms pressures read 37 psi. When returning to the vehicle noticed the flat, changed on the spot with the full size spare. It appears as though the sidewall structure/belt failed, taking the rubber with it. Tear is on the inside of the mounted wheel, and is inconsistent with a cut or puncture from a foreign object. I will save the failed tire if you guys would like it for analysis. I want to emphasize, no additional damage to the structure from vehicle movement, satic failure, and the belt was stressed/cycled once as the vehicles weight was lowered as air pressure went to zero and removed as the vehicle was raised for removal and replacement. Vehicle has never been used for 4 wheeling, and no more than a few miles accrued from off pavement driving. Only tow mileage is approximately 400 to 500 with a dual jet ski trailer (gross trailer weight: 2500 lbs) Thanks, [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Dec 20, 2023TX
  Service brakes

  Vehicle brakes normally initially at stop lights but then the brakes are unable to hold the vehicle stationary. Brake pedal slowly goes to the floor and vehicle creeps forward into traffic. No warning lights. No brake fluid leaks at wheels. Full brake fluid reservoir.

• Oct 29, 2023OH
  Steering · Suspension

  Around 50-55mph, shake can be felt in the steering wheel. Possible needle bearing? Common complaint yet Toyota states it is operating "normal". Steering wheel shake is not normal. This has occurred since I purchased the vehicle.

• Oct 14, 2023AL
  Unknown or other
  While doing approximately 65 on clear, sunny, and dry conditions heading north bound on I-65 with no traffic my sunroof spontaneously exploded outwards with enough force to shake the whole cabin. Luckily my sunshade was closed so no shards entered the vehicle at that time. The remaining glass was…

  While doing approximately 65 on clear, sunny, and dry conditions heading north bound on I-65 with no traffic my sunroof spontaneously exploded outwards with enough force to shake the whole cabin. Luckily my sunshade was closed so no shards entered the vehicle at that time. The remaining glass was convex, sticking outwards. The dealer’s service advisor told me he had 8 customers with this same issue in the last 2 weeks. Toyota needs to consider the frequency of these events and declare a manufacturing defect and / or issue a safety recall.

• Sep 5, 2023SC
  Seat belts
  My daughter was seated on the passenger side rear of my vehicle. Her seatbelt was on correctly and we were slowing down to pull into the driveway. My daughter said her seatbelt was stuck and wouldn't loosen. She unbuckled the seatbelt and tried to loosen it and remove it from around her waist. She…

  My daughter was seated on the passenger side rear of my vehicle. Her seatbelt was on correctly and we were slowing down to pull into the driveway. My daughter said her seatbelt was stuck and wouldn't loosen. She unbuckled the seatbelt and tried to loosen it and remove it from around her waist. She was stuck in the seatbelt, it would not loosen even the slightest bit. I called 911 and they sent the fire department out. They could not get it to loosen in any way and they had to cut my seatbelt to remove my child. My vehicle is a 2022 and I don't understand how this is a normal safety feature. My child was stuck in her seatbelt with no other way out than to cut the seat belt.

• Aug 18, 2023TX
  Steering · Suspension
  Aggressive steering wheel vibration from 55-70 mph from the day I drove the vehicle off the lot. Ignoring the vibration, Toyota claims this 4runner is operating as it is manufactured to do so. This is causing unnecessary wear on the steering and/or suspension. Without a visual warning sign from…

  Aggressive steering wheel vibration from 55-70 mph from the day I drove the vehicle off the lot. Ignoring the vibration, Toyota claims this 4runner is operating as it is manufactured to do so. This is causing unnecessary wear on the steering and/or suspension. Without a visual warning sign from the vehicle, this could cause catastrophic failure while driving, ultimately putting the driver and other drivers at risk while on the road. Additionally, the vehicle can be hard to control due to the vibration, which could cause excess swerving. Toyota claims it is the tires. Toyota issued me two different sets of tires and the issue persists. It is not the tires, it is a manufacturing defect that is a safety hazard and reduces the value of the vehicle.

• Aug 7, 2023IL
  Lane departure › Assist · Lane departure › Blind spot detection · Unknown or other
  We were driving down the interstate, no other cars, trucks, etc anywhere near us, and the sunroof of our 2022 Toyota 4Runner spontaneously shattered. We were lucky that we had the shade closed on the sunroof when we experienced the gunshot like blast. We opened our sunroof shade and had glass fall…

  We were driving down the interstate, no other cars, trucks, etc anywhere near us, and the sunroof of our 2022 Toyota 4Runner spontaneously shattered. We were lucky that we had the shade closed on the sunroof when we experienced the gunshot like blast. We opened our sunroof shade and had glass fall down on us. We are so lucky that we had the shade closed and that there were no other cars near us, as this surely would have put lives at risk. We spoke to the Toyota dealership service manager where we bought the car the following day, which is about an hour from our house. He directed us to bring it in. When we arrived at the scheduled date/ timeframe, he informed us that it would take a day or so to do diagnostic tests- but he could not provide us with a car.(He knew that we were driving over an hour to bring it in.) We obviously could not get home without a car. They directed us to try going to a different dealer. We went to a Toyota dealer on the way home, 1/2 hour from our house. They did not want to deal with the car and said we need to take it back to the dealer we bought it from. He also stated that he'd never heard of this happening and that it must have been a rock, which is similar to what the first dealership said. I've read on-line now that our experience is not unique to us. We are confident that we did not have a chip or crack in our sunroof prior to this happening. This incident definitely puts people at risk.

• Jul 24, 2023NJ
  Unknown or other

  I have had 3 cracks on my windshield in the 8 months of owning this car I was wondering if there is any structural recall to this vehicle

• Jun 19, 2023MDCrash4 injuries
  Air bags
  I was slowing down with traffic going about 30mph and was rear ended by a small suv going about 50-60mph. I was then hit on the right side by car who was originally behind us. I was thrown forward and then to the left. The emergency assist call was activated but not one of the airbags went off. I…

  I was slowing down with traffic going about 30mph and was rear ended by a small suv going about 50-60mph. I was then hit on the right side by car who was originally behind us. I was thrown forward and then to the left. The emergency assist call was activated but not one of the airbags went off. I ended up with back and neck pain and injury. My passengers all suffered whiplash and one hit her head on the dashboard causing a concussion.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010059Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005115Toyota plans to conduct Safety Recall and Service Campaign follow-up notifications to owners whose vehicles have not yet had the following Safety Recall and/or Service Campaign repairs completed
• 11005114Safety Recall and Service Campaign completion is an important part of our commitment to customer satisfaction of Toyota products. Toyota will be conducting follow-up notifications to remind owners whose vehicles have not yet had Safety Recall and/or Service Campaign repairs completed in the campaigns listed
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005057Toyota plans to conduct Safety Recall and Service Campaign follow-up notifications to owners whose vehicles have not yet had the following Safety Recall and/or Service Campaign repairs completed
• 11005056Safety Recall and Service Campaign completion is an important part of our commitment to customer satisfaction of Toyota products. Toyota will be conducting follow-up notifications to remind owners whose vehicles have not yet had Safety Recall and/or Service Campaign repairs completed in the campaigns listed
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253225TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10252259TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
• 10247828TSB: All 2020 ? 2023 model year 4Runner, 2018 ? 2022 model year Sequoia, 2018 ? 2023 model year Tacoma, and 2018 ? 2021 model year Tundra vehicles are equipped with Pre-collision System (PCS) and Dynamic Radar Cruise Control (DRCC) as part of the Toyota Safety Sense (TSS) package. The PCS and DRCC systems are designed to help mitigate a potential collision and maintain a pre-determined traveling distance. It is recommended to disable the PCS and DRCC systems on vehicles that have been modified (ride height, oversized wheels/tires, brush bars, etc.) in a way that potentially disrupts the functionality of these systems. Vehicle owner?s written consent is required before performing the calibration to permanently disable the PCS and DRCC systems. Follow the Repair Procedure in this bulletin to disable the PCS and DRCC systems.
• 10247800TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
• 10245474Ti: technical instructions for 22tc01 data communication module (dcm) reprogramming certain 2021 model year c-hr, RAV4 prime, tundra certain 2021-2022 4runner, highlander, highlander hv, prius prime, sequoia, tacoma certain 2022 prius
• 10245468TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
• 10245450TSB: Some 2021 ? 2024 model year 4Runner vehicles may exhibit a cyclic growl/groan noise from the front of the vehicle while driving in 2WD at around 30 ? 50 mph (48 ? 80 kph). The noise subsides when the vehicle is put into 4WD. This condition may be more prominent in colder temperatures. Follow the Repair Procedure in this bulletin to address this condition.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10244111TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
• 10230376TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
• 10230360TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224177TT: If you see this condition, please create a TAS case and contact TAS for instruction prior to diagnosing or repairing of the vehicle. If it is a weekend or holiday, continue with diagnosis and repair. Please save all parts and/or details and contact TAS on the next available workday.

Every Toyota 4RUNNER model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.