2021 Toyota 4RUNNER

Recalls

1 recall names the 2021 Toyota 4RUNNER. Newest first.

• Equipment › Other › Labels

  Jul 6, 2022NHTSA 22V480000280 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain 2020-2022 4Runner vehicles equipped with 20-inch Black Gunner Wheels. The load carrying capacity modification labels are incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."

  Risk and remedy

  Risk

  An incorrect label may lead to unintentionally overloading the vehicle, increasing the risk of a crash.

  Remedy

  SET will mail replacement labels to owners, free of charge. Owner notification letters are expected to be mailed September 4, 2022. Owners may contact SET's customer service at 954-429-2000. SET's number for this recall is SET22A.

  Full recall details →

Owner complaints

What owners report most

1. Steering13
2. Suspension10
3. Service brakes6
4. Wheels4
5. Exterior lighting3
6. Forward collision avoidance3
7. Electrical system3
8. Back over prevention2
9. Unknown or other2
10. Visibility/wiper2

Latest complaints

• Sep 3, 2026CA
  Steering
  While vehicle was parked and not in use, upon entering the vehicle, the steering wheel/column dropped out of its locked position on its own. Disassembly of the steering column revealed that the tilt-lock mechanism's steering lock fracture bolt has broken in half on the right side. This cause the…

  While vehicle was parked and not in use, upon entering the vehicle, the steering wheel/column dropped out of its locked position on its own. Disassembly of the steering column revealed that the tilt-lock mechanism's steering lock fracture bolt has broken in half on the right side. This cause the steering wheel to fall out of a locked position and allowed the entire column to rotate skewed to the left side. The steering wheel became dangerous to use as it was in a freed position that allowed the entire column to move while providing inputs into the steering wheel. Had this occurred while the vehicle was in motion, it could have caused a sudden loss of steering control and significantly increased the risk of a crash or injury. The problem was confirmed by an independent mechanic upon teardown of the steering column, who visually verified the broken fracture bolt and the resulting free movement of the column. There were no dashboard warning signs, error messages, or noticeable symptoms prior to this event. The column simply came loose and dropped when entering the vehicle after it had been parked. The vehicle had about 120,000 miles at the time of failure.

• Aug 25, 2026OK
  Latches/locks/linkages › Electronic lock/latch actuator
  The power door lock actuators on both front doors of my 2021 Toyota 4Runner have failed. The problem developed progressively. The front door locks initially began working intermittently and became less reliable over time. Eventually, both front door lock actuators stopped operating. They have now…

  The power door lock actuators on both front doors of my 2021 Toyota 4Runner have failed. The problem developed progressively. The front door locks initially began working intermittently and became less reliable over time. Eventually, both front door lock actuators stopped operating. They have now been inoperative for more than six months. The front doors will not reliably lock or unlock using the vehicle's power locking system or key fob, while the rear power door locks continue to operate normally. I discussed the problem with a Toyota dealership and was told by dealership personnel that they have seen this door lock actuator failure happen countless times. Despite the apparent frequency of the problem, I am not aware of a recall covering my vehicle. I am concerned about the safety implications of multiple door lock actuators failing prematurely. The failure prevents the vehicle's power locking system from reliably securing or unlocking the front doors and could cause difficulty quickly unlocking a front door for a passenger or occupant in an emergency. There were no warning lights or dashboard messages before the failures. The primary warning was the progressively intermittent operation of each front door lock before it stopped functioning entirely. Both front doors experienced the same progressive malfunction. I am reporting this because the failure has affected multiple actuators on the same vehicle, has persisted for more than six months, and a Toyota dealership indicated that it has encountered this problem many times.

• Jun 22, 2026OK
  Exterior lighting

  The interior of both headlights have the interior coating peeling in the first 20k miles

• May 30, 2026MT
  Steering

  I just had the tires road force balanced on a haweka with lug-centric balance, and the steering wheel persists shaking from 55-65 mph. From what I have seen is this is a design flaw on this generation of 4 runners called the shimmy. For a newer vehicle this is not only dangerous, but unacceptable to not be considered for a recall when it is this widespread.

• Mar 6, 2026UT
  Service brakes

  Today while I was driving home from work, in a snow storm, suddenly a low braking power notification and ABS malfunction popped up on my console with loud beeping and my brakes completely stopped working. In order to avoid hitting the car in front of me I had to swerve to the shoulder and come to a stop.

• Jan 22, 2026TX
  Back over prevention › Sensing system › Camera
  My backup camera does not work consistently. It will sometimes come on and show objects behind me; other times it is a black screen. I have read where Toyota models from 2022 to newer, but not including the 4 Runner, are having major issues with the back up camera and are under recall. I…

  My backup camera does not work consistently. It will sometimes come on and show objects behind me; other times it is a black screen. I have read where Toyota models from 2022 to newer, but not including the 4 Runner, are having major issues with the back up camera and are under recall. I believe this recall should include the Toyota 4 Runner, as mine seems to be having issues which affect my safety and others. I called the nearest Toyota dealership to verify if my car was under recall and they said no. I have not taken the vehicle to be inspected by the dealership. This issue started about 6 -8 months ago. No lights or warning messages appear on the dashboard. I thought maybe my camera was dirty, but wash the car and it still is inconsistently working. It fails more than it works.

• Dec 27, 2025VACrash
  Back over prevention › Sensing system › Camera
  Rear backup camera has been failing or intermittently working, it is available for insp[ection upon request. This has created a situation upon reversing in driveway where I expect it to be on and dont see a vehicle or trailer behind me. I have hit a parked car because I was expecting it to work as…

  Rear backup camera has been failing or intermittently working, it is available for insp[ection upon request. This has created a situation upon reversing in driveway where I expect it to be on and dont see a vehicle or trailer behind me. I have hit a parked car because I was expecting it to work as I check rearview mirrors. This is now a habit and I did not realize it wasn't working at the time until i collided with the vehicle. The dealership will not confirm it or inspect it unless payment is rendered. No one has inspected it except for Virginia. Which I am unsure that is even something they inspect. They may have just inspected other things that allow for use on highway. No lamps or other warnings when it began in april 2023. I have not tried to get it fixed as this is a new vehicle and I wasn't willing to pay the dealer to diagnose and most likely decline my warranty coverage.

• Dec 10, 2025MO
  Fuel/propulsion system

  Vehicle was diagnosed from a mechanic with no fuel pressure due to not starting. Vehicle has approximately 135,000 miles and had no warnings or indications of problem. It appears when VIN was ran on gov. recall that Honda had issues with fuel pump. Vehicle will be inspected by Toyota dealer.

• Dec 3, 2025AL
  Electrical system
  Several door lock actuators have prematurely failed. The first to do so was front passenger door in summer 2024; front driver door lock failed a few months after. Most recently, approximately 4 months ago, the lock actuator for liftgate failed. This poses safety hazard in easily exiting vehicle…

  Several door lock actuators have prematurely failed. The first to do so was front passenger door in summer 2024; front driver door lock failed a few months after. Most recently, approximately 4 months ago, the lock actuator for liftgate failed. This poses safety hazard in easily exiting vehicle and/or entering it if in dangerous situation. I have been communicating with local Toyota dealership for months about repairing these defective items, They have acknowledged awareness of an issue with the actuators, but have offered no help. I have read there is a class action lawsuit pending about this issue. [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Jul 18, 2025MS
  Air bags · Electrical system · Seats
  Saturday morning July 12th after starting my vehicle, a warning was presented “SRS AIRBAG SYSTEM MALFUNCTION”. I immediately took it to the dealership where they ran diagnostics. The service advisor admitted he nor his mechanic had ever seen anything like that before. They were unable to detect the…

  Saturday morning July 12th after starting my vehicle, a warning was presented “SRS AIRBAG SYSTEM MALFUNCTION”. I immediately took it to the dealership where they ran diagnostics. The service advisor admitted he nor his mechanic had ever seen anything like that before. They were unable to detect the issue that day. We planned to return the vehicle Thursday July 17. I dropped it off at 10am and never heard from the dealership again that day. Friday, July 18th I contacted the service advisor around 10 am to get an update in which he said they were looking into it. Friday afternoon, I received a call from the service advisor letting me know that the front passenger Occupant ECU had malfunctioned, costing approximately $1000. After researching this, I learned that Toyota has issued many recalls on this issue with other models. I called Toyota headquarters to see how they would rectify this but ended the conversation with no solution other than it is the consumer’s liability. This is a safety issue that should fall back on the manufacturer, especially given the history of recalls issued on this specific defect.

• Feb 18, 2025CA
  Service brakes
  My brakes and rotors are requiring replacement after less than 10,000. I purchased my vehicle used with less than 15,000 miles. My brakes and rotors have been replaced three times in the last 45,000 miles. The dealership denies any malfunction or error with the breaking system. I have seen multiple…

  My brakes and rotors are requiring replacement after less than 10,000. I purchased my vehicle used with less than 15,000 miles. My brakes and rotors have been replaced three times in the last 45,000 miles. The dealership denies any malfunction or error with the breaking system. I have seen multiple complaints online from other 4Runner owners with the same issues. My vehicle has less than 60,000 miles and I commute 5 miles a day to work on surface streets. I do not take it off Roading. I do not tow. I drive 5 miles to work and 5 miles home. I have been driving for over 30 years and have never had to replace brakes and rotors every nine months. Right after we purchased the vehicle, we brought it in saying the brakes did not feel right. My husband thought they needed to be adjusted. We were told the brakes are hydraulic brakes and do not require adjustment. But the brakes have felt off since we first got them. Toyota service insist that they have inspected the vehicle fully and have found no issues.

• Mar 6, 2024MD
  Exterior lighting · Power train
  As the vehicle was traveling on a highway at 35 mph the vehicle shut off electronically three times and powered itself back on after 15 seconds or so of continuous cruising on the highway. Unable to accelerate or control the vehicle while the electronic component shut off in the vehicle. Three days…

  As the vehicle was traveling on a highway at 35 mph the vehicle shut off electronically three times and powered itself back on after 15 seconds or so of continuous cruising on the highway. Unable to accelerate or control the vehicle while the electronic component shut off in the vehicle. Three days later, a series of warning lights and check engine lights turned on, which has occurred 6 other times, and has been brought to local Toyota dealer multiple times (over six times) and no fix has been conducted to repair the vehicle other than resetting the vehicles ECU. When all of the warning lights turn on, the vehicle loses 2nd gear and juts itself forward and becomes extremely difficult to control to the point where I have almost gotten into life threatening accidents over 4 times. Toyota has acknowledged that they do not know what is wrong with the vehicle and is unsure how to fix it. This is a safety concern that is not getting enough attention and needs to be rectified before someone or myself ends up killing ourselves

• Feb 26, 2024NY
  Suspension

  TRD PRO MODEL Clunk at low speeds. FOX shocks on TRD PRO make clunking sound at low speeds. Toyota replaced 3 shocks under warranty. The 3rd one they charged me labor but covered the shock. Car has highway miles and very little time spent off road as I live in NY. As of today clunking is back in full force. Seems to be an ongoing problem if you google clunking fox shocks Toyota TRD 4Runner.

• Jan 28, 2024NYCrash
  Service brakes
  While pulling this vehicle in to my garage about halfway in the brake pedal went to the floor and the vehicle hit a bench on the opposite side of the entrance. After pumping the brakes after waiting about 10 minutes they seemed to work normally. I backed the vehicle out of the garage and saw NO…

  While pulling this vehicle in to my garage about halfway in the brake pedal went to the floor and the vehicle hit a bench on the opposite side of the entrance. After pumping the brakes after waiting about 10 minutes they seemed to work normally. I backed the vehicle out of the garage and saw NO fluid under the vehicle. The next morning the vehicle was towed the the dealer collision shop and then taken to the service department at the dealer. This problem; ,after almost 2 months was never solved....corporate offices checked the data recorder...no conclusions.....and implied this problem did not occur. The body is now being repaired yet no brake problem has been ever repaired. ( under warranty....31,967 miles ). I understand a similar problem occured in New Jersey although on the road and the driver had to be removed through the sunroof and the vehicle was totaled.

• Jan 22, 2024PA
  Suspension
  The contact owns a 2021 Toyota 4Runner. The contact received notification of NHTSA Campaign Number: 23E051000 (Suspension) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…

  The contact owns a 2021 Toyota 4Runner. The contact received notification of NHTSA Campaign Number: 23E051000 (Suspension) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. The VIN was not available.

• Jul 9, 2023TX
  Steering

  I have a Toyota 4runner 2021. I'm actually presenting steering wheel shake and a feeling of unstable suspension issues in the front end during highway speeds more than 60 MPH. I when to the dealership and they align and balance the tires. But problem still happens. They said that not problem has been found when they verified the vehicle but they noticed the issue.

• May 10, 2023KS
  Steering · Suspension
  I purchased the vehicle from a Dealer. During a test drive I noticed a shake in the steering wheel that represented a wheel balance issue. The dealership acknowledged that, according to their techs that it was a wheel issue. A new set of tires was ordered mounted and balanced. I have been dealing…

  I purchased the vehicle from a Dealer. During a test drive I noticed a shake in the steering wheel that represented a wheel balance issue. The dealership acknowledged that, according to their techs that it was a wheel issue. A new set of tires was ordered mounted and balanced. I have been dealing with the issue of sometimes excessive steering wheel shake and a feeling of unstable suspension issues in the front end during highway speeds of 60-70 MPH. In researching this model of Toyota it appears this is a well documented problem that has not been addressed by Toyota.

• Feb 4, 2023NJCrash1 injury
  Forward collision avoidance › Adaptive cruise control · Service brakes · Vehicle speed control
  was going to work on rt 80 east had cruise control on and was getting off exit 45 in new jersey to get bus into manhattan at approx 430 amwhile getting off highway stepped on brakes pedal went to floor tried pumping nothing happened nor did criuise control disengage or collision warning come on a…

  was going to work on rt 80 east had cruise control on and was getting off exit 45 in new jersey to get bus into manhattan at approx 430 amwhile getting off highway stepped on brakes pedal went to floor tried pumping nothing happened nor did criuise control disengage or collision warning come on a total collapse of system had this car for approx 1 month purchased used at paramus mercedes benz took this vehicle to my mechanic for a full inpection everything was good vehicle had approx 22000 miles on it at purchase lost all control and crashed going off roadway and sliding down bridge abuttment car is a total loss rushed to hospital car was hauled off abutment by wrecker company police fire and ambulance showed up had to break sunroof to get me out no one could belive i survived this happened yesterday feb 3 2023 called toyota corporate and they issued me a claim number as well as my insurance comp looking on line this problem seemed to happen to quite a few people can you please address this issue before more people get injured or worse its only by the grace of god that i am writing this to you this vehicle is now in storage at powder mill collision thankyou

• Dec 12, 2022TX
  Steering · Suspension

  At speeds above 45 miles and hour, the steering wheel begins to nibble / shake which creates an unsafe driving situation. Vehicle has had alignment performed, and new tires balanced which still has not resolved issue.

• Nov 19, 2022CO
  Tires
  Yokohama 245/60r20 Geolander G96 that came with my brand new 2021 Toyota 4Runner Limited I purchased in December 2020. Over the last several weeks every 7 to 10 days I have needed to put air in all 4 tires. Then I was driving on a smooth paved street arriving at work my low pressure warning light…

  Yokohama 245/60r20 Geolander G96 that came with my brand new 2021 Toyota 4Runner Limited I purchased in December 2020. Over the last several weeks every 7 to 10 days I have needed to put air in all 4 tires. Then I was driving on a smooth paved street arriving at work my low pressure warning light came on. I got out and had a flat tire. I found the inner sidewall failed at only 28,000 miles. I didn’t hit anything on the road, or hit a curb etc. just normal driving on paved roads. Putting on the spare I took my 4Runner to the Toyota dealership a few miles away. The service technician at our local Toyota dealer today stated they, “are seeing this issue as a common problem with this particular tire on Toyota 4Runners in our Colorado Cold climate, is causing the rubber to become excessively brittle. Even with normal use, the smallest stones/sand used in our highway plows/sanding trucks cause catastrophic premature tire failure. They may be fine for use in California warm clients but not here in Colorado.” This explains why recently every 7 to 10 days I have needed to put additional air in all 4 tires. The rubber is prematurely becoming brittle/rot in cold weather thus not properly sealing the air. The technician recommended going with 4 new tires from a different manufacturer, stating the problem will continue with the other 3 Yokohama tires and likely a new Yokohama tire as well. He agreed the tire should be recalled as this is unacceptable especially for a tire with a M+S (mud and snow rating), only 28,000 miles on and properly taken care of. At $400+ per tire this is a huge expense and clearly a HUGE safety issue in cold climates. In cold weather having to refill tires with air every 7 to 10 days is a real hassle as well. Good thing I have my own air compressor at home. I only drive with the correct air pressure per my owners manual as stated on my drivers door. The Toyota dealer drew a white chalk square around the tire failure area.

• Aug 30, 2022TX
  Steering · Suspension · Wheels
  Bought the vehicle brand new and have been dealing with a steering wheel/vehicle shake ever since. The vehicle feels out of control around 55-65mph(like death wobble) and the ride is rough at any speed over 50mph. This has been a serious issue on the highway with instances of crossing lanes because…

  Bought the vehicle brand new and have been dealing with a steering wheel/vehicle shake ever since. The vehicle feels out of control around 55-65mph(like death wobble) and the ride is rough at any speed over 50mph. This has been a serious issue on the highway with instances of crossing lanes because of lack of control over steering. No warning lights have ever come on. Been to the dealership many times complaining about the issue just to be told that the "problem can't be replicated". I have taken it to several tire shops as well to have the wheels/tires balanced but nothing seems to help. I even bought new wheels and tires just to see if this was the cause and still no solution. This is a serious problem that thousands of 4Runner owners are experiencing and Toyota needs to get to the bottom of this. This absolutely should not be happening on brand new/modern day vehicles. I believe this is a multivariate issue causing the shake - a mix between wheel/tire balance, steering column, and possibly the drive shaft/differential/CV components. The problem must be big if Toyota continues to deny the problem year after year after year.

• Feb 19, 2022TX
  Service brakes · Steering · Suspension

  Driving up to 60mph the steering wheel vibrates excessively. I have taken it to the dealer and got repairs to fix it but 2 days later it returned. I had wheels balanced and rotated with an alignment. I fear I will loose control of the suv soon.

• Jan 20, 2022PA2,800 mi
  Visibility › Sun/moon roof assembly

  The contact owns a 2021 Toyota 4Runner. The contact stated while driving approximately 70 MPH, the sunroof exploded, sending glass inside the cabin of the vehicle. The vehicle was taken to a local dealer where it was diagnosed with needing the sunroof to be replaced however, the vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 2,800.

• Oct 2, 2021CA
  Exterior lighting
  When carrying cargo, the cutoff of the LED low beam headlamps is shifted upward blinding on coming traffic and dazzling other drivers. This requires the driver to manually adjust the angle of headlight projection under the hood of the vehicle, as there is not automatic system to do so, or even a…

  When carrying cargo, the cutoff of the LED low beam headlamps is shifted upward blinding on coming traffic and dazzling other drivers. This requires the driver to manually adjust the angle of headlight projection under the hood of the vehicle, as there is not automatic system to do so, or even a manual system inside the vehicle. As a result, it’s likely few drivers will do this. Also, it is not possible to manually adjust the headlamps every time the weight in the vehicle shifts. LEDs are particularly bright and affect oncoming traffic. If they are not perfectly aligned at least 50% of the oncoming cars flash their lights at me, many leaving their brights on, probably assuming I am doing the same. Therefore, it’s not just that my vehicle is blinding them, but there is also an element of road rage that comes into play with both drivers becoming dazzled. As such, basic visibility safety at night, should require LED headlamps to all have a self-leveling feature to account for the headlight cutoff angle changing when carrying cargo.

• Sep 28, 2021NM
  Steering · Suspension

  Steering wheel shakes around 58-64 mph. Brought 4Runner in twice already with tires being road-forced balanced but nothing seems to work. I will be bringing it in again for the third time. This has happened with less than 100 miles, now with 2,700 mi.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010059Some customers have expressed concern that the wireless functions of their Key Fob stop working. Key Fob LEDs will not turn ON, but engine starts with key held up against start button. Key battery voltage is confirmed OK and no DTC/RoB is found. This condition may occur if customer places Key Fob near wireless charger while phone is charging. When the key battery is removed and reinstalled, the Key Fob begins to operate normally.
• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005115Toyota plans to conduct Safety Recall and Service Campaign follow-up notifications to owners whose vehicles have not yet had the following Safety Recall and/or Service Campaign repairs completed
• 11005114Safety Recall and Service Campaign completion is an important part of our commitment to customer satisfaction of Toyota products. Toyota will be conducting follow-up notifications to remind owners whose vehicles have not yet had Safety Recall and/or Service Campaign repairs completed in the campaigns listed
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005057Toyota plans to conduct Safety Recall and Service Campaign follow-up notifications to owners whose vehicles have not yet had the following Safety Recall and/or Service Campaign repairs completed
• 11005056Safety Recall and Service Campaign completion is an important part of our commitment to customer satisfaction of Toyota products. Toyota will be conducting follow-up notifications to remind owners whose vehicles have not yet had Safety Recall and/or Service Campaign repairs completed in the campaigns listed
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10252259TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
• 10247828TSB: All 2020 ? 2023 model year 4Runner, 2018 ? 2022 model year Sequoia, 2018 ? 2023 model year Tacoma, and 2018 ? 2021 model year Tundra vehicles are equipped with Pre-collision System (PCS) and Dynamic Radar Cruise Control (DRCC) as part of the Toyota Safety Sense (TSS) package. The PCS and DRCC systems are designed to help mitigate a potential collision and maintain a pre-determined traveling distance. It is recommended to disable the PCS and DRCC systems on vehicles that have been modified (ride height, oversized wheels/tires, brush bars, etc.) in a way that potentially disrupts the functionality of these systems. Vehicle owner?s written consent is required before performing the calibration to permanently disable the PCS and DRCC systems. Follow the Repair Procedure in this bulletin to disable the PCS and DRCC systems.
• 10247800TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
• 10245474Ti: technical instructions for 22tc01 data communication module (dcm) reprogramming certain 2021 model year c-hr, RAV4 prime, tundra certain 2021-2022 4runner, highlander, highlander hv, prius prime, sequoia, tacoma certain 2022 prius
• 10245468TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
• 10245450TSB: Some 2021 ? 2024 model year 4Runner vehicles may exhibit a cyclic growl/groan noise from the front of the vehicle while driving in 2WD at around 30 ? 50 mph (48 ? 80 kph). The noise subsides when the vehicle is put into 4WD. This condition may be more prominent in colder temperatures. Follow the Repair Procedure in this bulletin to address this condition.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10244111TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230376TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
• 10230360TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224177TT: If you see this condition, please create a TAS case and contact TAS for instruction prior to diagnosing or repairing of the vehicle. If it is a weekend or holiday, continue with diagnosis and repair. Please save all parts and/or details and contact TAS on the next available workday.

Every Toyota 4RUNNER model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.