2001 Toyota 4RUNNER
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › 4RUNNER › 2001
These records cover every 2001 Toyota 4RUNNER. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2001 Toyota 4RUNNER. Newest first.
Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Ck motorsport will notify owners and replace the noncompliant lamps free of charge. the recall began on july 1, 2006. owners may contact ck motorsport at 1-909-610-7211.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
On certain sport utility vehicles, due to a manufacturing issue in the front suspension lower ball joint, there IS a possibility that the surface of the ball of the joint may have been scratched. the ball joint may eventually experience excessive wear and looseness, resulting in increased steering effort.
Risk and remedy
Risk
The lower ball joint may separate from the knuckle causing loss of steering control and a crash could occur.
Remedy
Dealers will replace the front suspension lower ball joints free of charge. the recall began on july 5, 2005. owners may contact toyota at 1-800-331-4331.
Owner complaints
185 complaints10 involved a crash1 involved a fire12 injuries
What owners report most
Latest complaints
- Suspension › Front › Control arm › Lower ball joint
The contact owns a 2001 Toyota 4Runner. The contact stated that while driving approximately 15 MPH, there was a thumping and clicking sound coming from the front of the vehicle before the front passenger’s side of the vehicle unintendedly lowered. The vehicle was stopped and inspected, and the ball…
The contact owns a 2001 Toyota 4Runner. The contact stated that while driving approximately 15 MPH, there was a thumping and clicking sound coming from the front of the vehicle before the front passenger’s side of the vehicle unintendedly lowered. The vehicle was stopped and inspected, and the ball joint was touching the ground. The vehicle was towed to the residence. The vehicle was then towed to an independent mechanic, where it was diagnosed that the lower ball joint had failed and needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was approximately 275,000.
- Unknown or other
I bought my 4Runner in 2021 and am just now getting ready to sell it. Did a carfax report and it shows a possible odometer rollback that the previous owner did in 2020. When I bought the vehicle it was my understanding that the vehicle had only 160,000 miles on it but it apparently had 236,900…
I bought my 4Runner in 2021 and am just now getting ready to sell it. Did a carfax report and it shows a possible odometer rollback that the previous owner did in 2020. When I bought the vehicle it was my understanding that the vehicle had only 160,000 miles on it but it apparently had 236,900 miles. Because of this I’ve had to make countless repairs as I was under the impression that the vehicle had much less wear. Was researching what to do in this scenario and learned that this was the best place to report the incident.
- Unknown or other
Rusted Frame Cracked by back driver side tire
- Structure · Structure › Frame and members
Frame has rotted out along with a lot more rust problems
- Structure › Body
The contact owns a 2001 Toyota 4Runner. The contact stated that he noticed a swaying while driving the vehicle. The vehicle was taken to a certified mechanic who stated that the sub frame was severely rusted between the sway bar and the differential. The certified mechanic referred the contact to…
The contact owns a 2001 Toyota 4Runner. The contact stated that he noticed a swaying while driving the vehicle. The vehicle was taken to a certified mechanic who stated that the sub frame was severely rusted between the sway bar and the differential. The certified mechanic referred the contact to the dealer. The contact took the vehicle to the dealer and was informed that the sub frame needed to be replaced. The dealer was concerned that the job was too extensive. The vehicle was not repaired. The manufacturer was made aware of the issue and referred the contact to the NHTSA for assistance. The approximate failure mileage was 119,000.
- Steering · Structure › Body · Unknown or other
First there were 3 recalls 1. 135468 2. 135469 and 3. 135469 dating back to 2005 that I was never notified of and I have a very bad corrugated metal bumpers and when I drive my vehicle and I hit a bump or something in the road it feels like my car IS going to turn over. I had the shocks replaced and it hasn't helped
- Unknown or other
The frame IS rusting out and IS deemed unsafe to drive
- Structure › Body · Suspension
The vehicle frame has rusted through. My mechanic says this IS unable to be inspected and should not be driven.
- Structure › Body
The frame of my 2001 toyota 4runner IS rusted to the point that you can break some of it off in our hand. Recently took my vehicle in for an oil change and was told that it would not pass inspection in its current condition. This required welding to some sections in order to keep driving. The…
The frame of my 2001 toyota 4runner IS rusted to the point that you can break some of it off in our hand. Recently took my vehicle in for an oil change and was told that it would not pass inspection in its current condition. This required welding to some sections in order to keep driving. The welding will only keep me on the road for now but the overall condition of the frame IS very deteriorated. The vehicle has over 205,000 miles on it but has been garage kept and maintained to all other standards. The auto shop said that the vehicle should not rust this much. I called toyota national headquarters and they said that the year and model was not included in any recalls. I need this car so I had the garage repair the immediate safety concern. This was discovered by the technician conducting the oil change. The images attached were after the work as they had to grind out the rusted sections and replace with welded steel. *tr
- Suspension
While driving down the highway at approximately 65mph our toyota 4runner suddenly began to shake and sway violently and was very difficult to control. I pulled over and checked but did not see anything apparent. We had the car checked at our local toyota dealer and was told the frame IS corroded…
While driving down the highway at approximately 65mph our toyota 4runner suddenly began to shake and sway violently and was very difficult to control. I pulled over and checked but did not see anything apparent. We had the car checked at our local toyota dealer and was told the frame IS corroded completely thru and the rear trailing arm was separated from the frame. The dealer advised that vehicle IS no longer safe to drive and they would not be able to repair since the frame was so badly rusted. We bought the car new and have always taken very good care of the vehicle and followed recommended maintenance. There IS no apparent rust on any of the body for this vehicle and IS in excellent operating condition otherwise. We had planned on keeping the vehicle for several more years but now left with nothing but apparently being able to sell for salvage.
- Structure › Body
Purchased vehicle took for mass inspection and failed due to rotted frame was told not road worthy and unsafe to drive called toyota they would not assist on repair vehicle has 145K miles on now vehicle dots on my driveway older gentleman I purchased from will not assist either spent $4K need assistance if possible please and thanks
- Structure › Body · Unknown or other
I just purchased a 2001 toyota 4runner. All seemed fine .but when I went to get it inspected they would not pass starting it had frame rust through. I called toyota customer service who said and I also read online that thousands of toyota trucks have a frame recall but mine does not. And they are not willing to do anything. others had the frame replaced, repaired or bought back. Hopefully you can help me.
- Steering · Suspension · Wheels
Entered highway from on ramp as picked up speed steering wheel began to shake violently and began to loose control of SUV. I immediately pulled over and had it taken to shop to find excessive rust on back frame n shock causing wheel to 'basically be free floating and unattached' the vehicle IS still in shop at moment and I can get pictures and a statement upon request
- Structure › Body
Dealer decline to do a transfer case repair because the vehicle frame IS severely rusted to the point that the trailing arm mount IS almost gone. Dealer advised me that the vehicle IS unsafe and the frame will break through. I will need to buy a new vehicle
- Structure › Body
Vehicle frame corrosion/rot.. Bad frame (just like the tacoma I had recalled due to bad frame)
- Structure › Body
I noticed a pretty distinct wobble when driving my 2001 $runner on the highway recently. I took it to a mechanic who informaed my the frame has a 1 inch wide 18 inch long hole from rust. the mechanic says they can weld it to possibly give it some more time to live but that it IS a ticking time…
I noticed a pretty distinct wobble when driving my 2001 $runner on the highway recently. I took it to a mechanic who informaed my the frame has a 1 inch wide 18 inch long hole from rust. the mechanic says they can weld it to possibly give it some more time to live but that it IS a ticking time bomb. there very well could be rust on the frame hidden behind the gas tank, but I am unable to look behind it. Toyota needs to take responsibility for their mistake when not properly coating these frames. they recalled other models for this same issue but failed to address the issue with the 4runner.
- Unknown or other
My 2001 tacoma had frame rust issues last year. I went to the local dealer and was told there was nothing they could do about it because the repair time frame had expired. They would have gladly sold me a new truck. Sorry, no can do. I took the truck to a weld shop and had the frame patched with…
My 2001 tacoma had frame rust issues last year. I went to the local dealer and was told there was nothing they could do about it because the repair time frame had expired. They would have gladly sold me a new truck. Sorry, no can do. I took the truck to a weld shop and had the frame patched with new steel. Problem fixed. I just got back from the mechanic's after learning that he can't inspect it because of the severely rusted frame! It just rusted around the patches. Junk price IS way low but what IS the alternative?
- Structure › Body
Frame rust on multiple locations. suspension shot right through rotted frame. frame has structural damage as a result of rust. car IS not safe to drive! I almost killed myself driving the car when the suspension penetrated right through the rotted rusted frame.
- Structure · Suspension · Unknown or other
Took my vehicle for oil change and was advised that the frame was badly rusted and should take vehicle to toyota immediately. toyota indicated that no recall was issued for this year model vehicle and nothing could be done. so I have a mechanically good vehicle that I can not use due to rusted frame.
- Structure › Body
Extreme frame rust. Husband says vehicle IS unsafe to drive. Even though the body looks great, the frame, where we can see it, IS in terrible condition, with holes rusted through the metal. No accidents yet, but it's ominous to know in a collision this vehicle would crumple like paper. there…
Extreme frame rust. Husband says vehicle IS unsafe to drive. Even though the body looks great, the frame, where we can see it, IS in terrible condition, with holes rusted through the metal. No accidents yet, but it's ominous to know in a collision this vehicle would crumple like paper. there are many other complaints of serious frame rust for other years of toyota 4runners. Please add my vehicle and safety concern to the growing list of other toyota owners facing the same frame disintegration.
- Structure · Unknown or other
Frame rust issues. My frame has been rusting away for the entire time I've owned it, and it isn't getting any better. The passenger inside frame rail IS rusted from the rear lower control arm mount to the cross member mount midway down the frame. The driver inside frame rail IS rusted at the lower…
Frame rust issues. My frame has been rusting away for the entire time I've owned it, and it isn't getting any better. The passenger inside frame rail IS rusted from the rear lower control arm mount to the cross member mount midway down the frame. The driver inside frame rail IS rusted at the lower control arm mount as well, and slightly in front of it. when I purchased the vehicle I noticed a slight pit, and didn't think anything of it. Over the next year that pit got bigger until there was a large opening that you could fit two hands inside of.
- Structure › Body · Unknown or other
"Takata recall" my 2001 toyota 4runner frame IS rusted out and won't pass state inspection.
- Unknown or other
Excessive corrosion to frame and related chassis components. This vehicle was bought in 2001 and serviced at our local toyota dealer for routine service all these years and never mentioned frame rust,until we had it serviced at a local muffler repair shop to replace the exhaust system. we have…
Excessive corrosion to frame and related chassis components. This vehicle was bought in 2001 and serviced at our local toyota dealer for routine service all these years and never mentioned frame rust,until we had it serviced at a local muffler repair shop to replace the exhaust system. we have contacted toyota and they informed us that the truck IS off warranty and that there IS nothing they can do for us, this IS why we are contacting nhtsa ,to inform the agency of this problem which IS similar to the case currently with the tacoma, sequoia and the tundra tucks manufactured by toyota
- Structure › Body
TL* the contact owns a 2001 toyota 4runner. The contact stated that the entire frame of the vehicle was rusted. The vehicle was taken to northway toyota (727 new loudon rd, latham, ny 12110, (888) 885-1583) and the contact was informed that there was no recall to cover the repair. The manufacturer…
TL* the contact owns a 2001 toyota 4runner. The contact stated that the entire frame of the vehicle was rusted. The vehicle was taken to northway toyota (727 new loudon rd, latham, ny 12110, (888) 885-1583) and the contact was informed that there was no recall to cover the repair. The manufacturer echoed the dealer's statement and issued case number: 1809211044. The vehicle was not diagnosed or repaired. The failure mileage was 150,000.
- Suspension · Unknown or other
The frame rusted out and IS very dangerous to drive .there are many complaints involving the frame rust on the 4 runners and toyota will not help with the problem
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10171405TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
- 10164330TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10150418TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10149217TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
- 10143927TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
- 10134454TechTip: Condition - The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.
Every Toyota 4RUNNER model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.