2018 Toyota 4RUNNER

Recalls

5 recalls name the 2018 Toyota 4RUNNER. Newest first.

• Fuel system, gasoline › Delivery › Fuel pump

  Nov 4, 2020NHTSA 20V6820001,525,742 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 4Runner, 2019-2020 Avalon, 2019 Corolla Hatchback, 2017-2019 Highlander, 2018-2020 Camry, 2020 Corolla, 2018-2019 Land Cruiser, 2017-2020 Tacoma, 2019-2020 RAV4, 2019-2020 Sequoia, 2017-2020 Sienna, 2019-2020 Tundra, 2018-2020 Lexus ES350, 2017 Lexus GS200t, 2017-2019 Lexus…

  Risk and remedy

  Risk

  If the fuel pump fails, the engine can stall while driving, increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will replace the fuel pump assembly with an improved one, free of charge. Owners of specific models were notified that remedy parts were available starting January 21, 2021. Owners of other models will be notified as remedy parts become available. Remedy parts should be available for all affected vehicles by late March 2021. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Note: This recall is an expansion of recall 20V-012. Toyota's number for this recall is 20TA02. Lexus' number for this recall is 20LA01.

  Full recall details →

• Steering

  Sep 20, 2019NHTSA 19V67000034 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain 2018-2019 Toyota 4Runner vehicles. During installation, certain steering and suspension components may not have been properly tightened.

  Risk and remedy

  Risk

  Loose fasteners may cause a loss of vehicle control, or cause an accessory to detach from the vehicle and become a road hazard. Either of these scenarios can increase the risk of a crash or injury.

  Remedy

  SET will notify owners, and dealers will inspect and re-tighten the steering and suspension fasteners as necessary, free of charge. The recall is expected to begin November 19, 2019. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET19B.

  Full recall details →

• Equipment › Other › Labels

  Oct 25, 2018NHTSA 18V7530001,295 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain 2017-2019 Toyota 4Runner vehicles that SET modified to be equipped with a TRD wheel package. The Gross Vehicle Weight Rating (GVWR) on the certification label may be incorrect, possibly resulting in the vehicle being overloaded. As such, these vehicles fail to comply with the requirements of…

  Risk and remedy

  Risk

  An overloaded vehicle can increase the risk of a crash.

  Remedy

  SET will notify owners and mail them corrected certification labels, free of charge. The recall began November 28, 2018. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET18A.

  Full recall details →

• Equipment › Other › Labels

  Dec 20, 2017NHTSA 17V831000649 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2017-2018 Toyota 4Runner and Tundra, 2018 Toyota Highlander, RAV4 and Lexus GX460 and 2017 Toyota Sienna and Tacoma vehicles. These vehicles may have incorrect load carrying capacity modification labels. As such, these vehicles fail to comply with the requirements of Federal Motor…

  Risk and remedy

  Risk

  An incorrect load information label can result in the operator overloading the vehicle and increasing the risk of a crash.

  Remedy

  Toyota will notify owners and provide them with corrected labels, free of charge. The recall began on January 23, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are H0Z for Toyota vehicles, and HLF for Lexus vehicles.

  Full recall details →

• Structure › Body › Hood

  Nov 29, 2017NHTSA 17V763000431 vehicles

  Southeast Toyota Distributors, LLC (SET) is recalling certain 2015-2018 Toyota 4Runner vehicles equipped with an accessory Billet Grille Overlay installed by SET or provided by SET and installed by SET dealers. The U-nut that secures the overlay grille may fracture, allowing the Billet Grille Overlay to detach from the vehicle.

  Risk and remedy

  Risk

  If the Billet Grille Overlay detaches while driving, it can become a road hazard, increasing the risk of a crash.

  Remedy

  SET will notify owners, and dealers will replace the securing U-nuts with upgraded hardware, free of charge. The recall is expected to begin January 26, 2018. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET17C.

  Full recall details →

Owner complaints

What owners report most

1. Steering12
2. Unknown or other9
3. Air bags8
4. Service brakes7
5. Structure5
6. Engine5
7. Fuel system, gasoline5
8. Suspension4
9. Electrical system4
10. Fuel/propulsion system4

Latest complaints

• Oct 26, 2026CT
  Service brakes
  On [XXX], my husband was driving our 2018 Toyota 4Runner Limited home from Coventry, CT, with me in the passenger seat. At the second-to-last STOP sign on our route, a yellow slip indicator light suddenly appeared on the dashboard. We did not know why. We wondered if we had accidentally touched a…

  On [XXX], my husband was driving our 2018 Toyota 4Runner Limited home from Coventry, CT, with me in the passenger seat. At the second-to-last STOP sign on our route, a yellow slip indicator light suddenly appeared on the dashboard. We did not know why. We wondered if we had accidentally touched a control near the steering wheel. The brakes still worked normally, and my husband stopped completely. I photographed the warning light. Since we were only a few minutes from home, we continued cautiously, planning to check the warning once home. Shortly afterward, we were driving downhill on [XXX] toward the next STOP sign at [XXX]. My husband applied the brakes, but the vehicle did not slow as expected. It continued downhill, gained speed, and entered [XXX] without stopping. [XXX] is normally busy. Fortunately, no vehicles were directly in our path, and no collision or injuries occurred. My husband turned on the hazard lights and drove slowly while looking for a safe place to stop. The normal brakes still could not bring the vehicle to a complete stop. He eventually stopped at a repair shop using emergency measures. We left the vehicle there because it was unsafe to drive. Afterward, my husband noticed that a rear brake pad appeared loose or detached and the rotor appeared deeply grooved. We do not know whether this caused the braking failure or whether the earlier warning light was related. The vehicle remains parked and available for inspection. No mechanic has inspected it, the problem has not been reproduced, and the cause is UNKNOWN. We reported the incident to Toyota USA on October 26 and contacted a Toyota dealer. We request that NHTSA document and evaluate this serious safety incident. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Oct 17, 2026MN
  Air bags · Steering
  Maplewood Toyota dealership service negligence resulted in a severe, 2-tooth mechanical misalignment of the steering intermediate shaft splines. The vehicle was subsequently driven for 11 months under extreme structural binding, inducing unmeasurable metallurgy fatigue on a primary control linkage…

  Maplewood Toyota dealership service negligence resulted in a severe, 2-tooth mechanical misalignment of the steering intermediate shaft splines. The vehicle was subsequently driven for 11 months under extreme structural binding, inducing unmeasurable metallurgy fatigue on a primary control linkage, internal hydraulic valve balancing failure within the steering gear assembly, and excessive over-tensioning of the primary airbag restraint electronics. Reusing these compromised components creates an active crash hazard and an unreasonable risk of sudden component failure. CHRONOLOGY OF EVENTS & REPEATED DIAGNOSTIC FAILURES: In January 2026, an authorized franchise facility (Maplewood Toyota) replaced a steering universal joint and incorrectly reassembled the linkage out of index by two full splines, bypassing factory matchmarking protocols. This error left the steering wheel heavily off-center and created a severe, constant pull to the right. Over the next 11 months, the vehicle was brought into the authorized dealer network for four separate service visits across multiple Toyota franchise locations to address the persistent pulling and unstable tracking. The authorized network systematically failed to identify the physical, visual misalignment during these safety inspections. In October 2026, the dealership finally admitted to the 2-tooth offset. Rather than executing a safety-compliant overhaul of a primary control tract that had been bound for nearly a year, the dealership executed an unacceptable cosmetic shortcut: they unbolted the intermediate shaft, slid the old parts back to center, replaced only the interior column housing, and released the vehicle. ACTIVE SAFETY HAZARDS & RISK OF CRASH: Despite the physical realignment of the splines, the underlying safety risks remain severe and unaddressed: A. CATASTROPHIC SPLINE STRIPPING RISK: Forcing hardened steel steering splines out of index and torquing them down introduces material crushing and cross-threading to the

• Jul 16, 2026VT86,000 mi
  Electrical system › Instrument panel › Speedometer/odometer
  Odometer Fraud. The contact purchased a 2018 Toyota 4Runner. The contact discovered that there was a mileage discrepancy per a Carfax report. The vehicle was a dealer sale. At the time of the purchase, the vehicle mileage was 65,862. However, the Carfax report indicated that the mileage was 61,000…

  Odometer Fraud. The contact purchased a 2018 Toyota 4Runner. The contact discovered that there was a mileage discrepancy per a Carfax report. The vehicle was a dealer sale. At the time of the purchase, the vehicle mileage was 65,862. However, the Carfax report indicated that the mileage was 61,000 in April 2022; 90,000 in February 2023; and 54,000 towards the end of the month in February 2023. The contact stated that the current approximate mileage was 86,000.

• Mar 27, 2026MD
  Air bags · Engine · Service brakes
  The dealership Direct Motor, located in Manassas, Virginia, sold me this car in poor condition. On Sunday the 22nd, I picked up the car around 10 PM. They didn't show me any information about the car. When I picked it up, I saw that the front bumper and rear door were damaged, and the airbag lights…

  The dealership Direct Motor, located in Manassas, Virginia, sold me this car in poor condition. On Sunday the 22nd, I picked up the car around 10 PM. They didn't show me any information about the car. When I picked it up, I saw that the front bumper and rear door were damaged, and the airbag lights were on, which is dangerous. I returned the car first thing Monday morning and asked them to exchange it. They refused. I asked for my money back, which is $3,000, and they refused again. Then I went back on Wednesday and filled out a form explaining why I returned the car. They said they would return my money, but now they're not responding. They're trying to scam me.

• Jan 10, 2026NM
  Service brakes · Steering · Suspension
  this vehicle was purchased from Don Chalmers Ford in Rio Rancho on 1129, 2025, upon purchasing a 2018 Toyota foreigner Limited I traded in a 2020 Acura RDX with only 50,000 miles. The salesman seemed to trustworthy. He showed me the Carfax Clean had no accidents no recalls then I receive some…

  this vehicle was purchased from Don Chalmers Ford in Rio Rancho on 1129, 2025, upon purchasing a 2018 Toyota foreigner Limited I traded in a 2020 Acura RDX with only 50,000 miles. The salesman seemed to trustworthy. He showed me the Carfax Clean had no accidents no recalls then I receive some paperwork stating this vehicle is eligible for a buyback. I still have not received the license plate or registration. No one informed me that this vehicle is eligible for a buyback meaning I paid way too much for this vehicle. I’m having problems with suspension brakes steering wheel shaking at high speeds leaks lights on several problems. The dealership promised they would fix everything they have ignored me. I am frustrated. This is not a safe vehicle. I have PTSD from totaling my 1998 Toyota 4 runner October 11 of 2025. I was clear that I need a safe vehicle. My kids were in my vehicle when I totaled my 1998. I have been given the runaround since the second day my son saw oil leaking from the vehicle. Lights went on many different things began to happen like explain this is the second day the seventh day the 14th day and every day once a week after leaving several text messages phone calls I spoke to Zach the sales guy Steve the guy that purchased his parts he purchased a sensor in a black lining that goes be behind the tire on the passenger side. I have found overspray lights are on something to do with the tires, I am not safe in this vehicle I told them it was not a valid purchase and to please reimburse me give me my 2020 Acura that I only had 50,000 miles. Excellent condition. I didn’t know that I was gonna be manipulated lie to lack of information was disclosed to me. I didn’t know it was eligible for buyback. I overpaid for a vehicle that is not safe and should not be on their lot. I’m ready to go the general manager of the president. I have eight fractures in my spine with head injuries. My 18-year-old was in the car with me thank God we are our life today. I’m sad

• Mar 25, 2025MOCrash
  Power train · Vehicle speed control
  While my father was exiting his 2018 Toyota 4Runner SR5, the vehicle unexpectedly started reversing fairly quickly, despite no foot being on the brake. He was dragged by the vehicle while attempting to stop it outside the car, and it continued moving backwards then down a hill before crashing into…

  While my father was exiting his 2018 Toyota 4Runner SR5, the vehicle unexpectedly started reversing fairly quickly, despite no foot being on the brake. He was dragged by the vehicle while attempting to stop it outside the car, and it continued moving backwards then down a hill before crashing into a fence, causing significant damage to both the car and the fence. This vehicle should not have rolled back at this speed, and it appears to be related to a potential design flaw in the vehicle’s brake-shift interlock system or automatic reverse functionality. This incident is concerning, and after reviewing discussions in various forums, it seems that similar issues may not be isolated to this particular vehicle and could point to a larger defect in Toyota vehicles. I am very disappointed that there are no built-in safety features that could have prevented this incident. It is extremely concerning that the vehicle shifted into reverse while the driver was in the process of exiting. A vehicle should not be able to reserve this quickly or move into reverse unintentionally without the driver’s control. This poses a serious safety risk to drivers and bystandards, and I strongly urge the NHTSA to investigate this issue and determine whether a defect or design flaw contributed to the incident. Implementing proper safeguards could prevent similar accidents in the future.

• Mar 15, 2025FL
  Fuel/propulsion system

  Fuel pump make noises and I can hear it

• Aug 31, 2024MA
  Suspension
  The front shock springs cracked and snapped due to cold weather. I have been waiting for 2 months for the replacement parts and cannot drive my vehicle. The parts are 4 months out on a waiting list. The vehicle is not safe to drive. The dealer has inpected the vehicle and said it is not safe to…

  The front shock springs cracked and snapped due to cold weather. I have been waiting for 2 months for the replacement parts and cannot drive my vehicle. The parts are 4 months out on a waiting list. The vehicle is not safe to drive. The dealer has inpected the vehicle and said it is not safe to drive for safety reasons. There were no warning and I only found out when I went to replace the original tires. The car has 25K miles.

• Jul 28, 2024MD
  Service brakes
  While attempting to stop vehicle for a traffic light brake pedal suddenly goes almost to the floor. This occurrence is random and unpredictable. No dash lights or messages come on indicating any problem. Brake master cylinder is at the proper level and no signs of leakage. The vehicle has not yet…

  While attempting to stop vehicle for a traffic light brake pedal suddenly goes almost to the floor. This occurrence is random and unpredictable. No dash lights or messages come on indicating any problem. Brake master cylinder is at the proper level and no signs of leakage. The vehicle has not yet been inspected by any technicians. Vehicle is available for inspection by NHTSA. As a retired Police officer and former FAA certified Airframe & Powerplant mechanic I am familiar with hydraulic systems. I believe that this issue if not identified and addressed by the manufacture will cause bodily harm to the operator and possibly other vehicles or pedestrians. There has also been a lot of chatter on Toyota forums about the same problem.

• Jul 18, 2024AZ
  Engine
  Two transfer case seals failed at 64,000 miles. Caused excessive oil to leak out of transfer case and onto the exhaust. Safety was put as risk by potential full failure of transfer case which can cause loss of power at speed or leaking oil on exhaust causing a fire. Problem was verified by…

  Two transfer case seals failed at 64,000 miles. Caused excessive oil to leak out of transfer case and onto the exhaust. Safety was put as risk by potential full failure of transfer case which can cause loss of power at speed or leaking oil on exhaust causing a fire. Problem was verified by Armstrong Automotive and repaired. No warning lights were present. Problem found after smelling burning oil and noticing smoking coming from underneath vehicle.

• Apr 18, 2024IAFire
  Unknown or other
  I do not know what component or system failed. I was at an appointment with my son when the receptionist informed me that my car alarm was going off and there was smoke coming out of it. I went out to investigate and it sounded like the engine was attempting to start continuously. My key fob…

  I do not know what component or system failed. I was at an appointment with my son when the receptionist informed me that my car alarm was going off and there was smoke coming out of it. I went out to investigate and it sounded like the engine was attempting to start continuously. My key fob would not unlock the car. The engine continued to attempt to start and i was certain the car was going to start fire. We called 911 and went back inside to avoid anyone being hurt. The car then caught fire and burned until the fire department put it out. It was towed to an impound lot where it caught fire again and was destroyed. See pictures for more information.

• Mar 29, 2024KYCrash1 injury
  Air bags

  My vehicle was in a collision at 55 miles an hour. Hit 3 grown cows in the highway at nighttime. Totaled my vehicle in the airbags, never deployed period Turn off.

• Mar 17, 2024GA
  Fuel/propulsion system
  Vehicle was parked in garage. Inspecting vehicle at 22:00, noise was heard. Source of noise was fuel pump located behind drivers side rear tire. Garage smelled of gasoline. Vehicle was turned off at 15:00 that day. Started up Vehicle with no issues and let run for 1.5 minutes then turned off.…

  Vehicle was parked in garage. Inspecting vehicle at 22:00, noise was heard. Source of noise was fuel pump located behind drivers side rear tire. Garage smelled of gasoline. Vehicle was turned off at 15:00 that day. Started up Vehicle with no issues and let run for 1.5 minutes then turned off. Noise was still present until Vehicle was locked via remote. Vehicle was not locked after being turned off at 15:00 until 22:00.

• Feb 5, 2024MS
  Electrical system

  Apparently rodents have gone to the engine and ate the soy wires to the harness. This in turn has cost me over $1000 to fix. The only warning was when the warning lights came on and four runner started to shake when started.

• Jun 26, 2023MA
  Steering
  There was a clunking noise coming from the front end when steering. Got worse over time. Also had a vibration in the front end at speeds above 45 mph. Dealer recommended replacement of upper steering column shaft assembly and dust boot cover along with lower intermediate steering shaft. The…

  There was a clunking noise coming from the front end when steering. Got worse over time. Also had a vibration in the front end at speeds above 45 mph. Dealer recommended replacement of upper steering column shaft assembly and dust boot cover along with lower intermediate steering shaft. The manufacturer knows about this problem because there is a NHTSA Campaign Number 19V67000 that states the suspension and steering fasteners were improperly tightened. This should be a recall and I should not have to pay for their mistakes! If it had come loose, there would be a loss of control leading to an accident! The dealer/manufacturer did not send out any notice or warning.

• May 1, 2023SC
  Service brakes
  Recently I have had issues with the brake pressure. The brakes have been bled multiple times assuring there is not air in the lines. My mechanic could not find an issue with the brakes at all, yet when I come to a complete stop, the car starts to creep forward sometimes unnoticeable and the brake…

  Recently I have had issues with the brake pressure. The brakes have been bled multiple times assuring there is not air in the lines. My mechanic could not find an issue with the brakes at all, yet when I come to a complete stop, the car starts to creep forward sometimes unnoticeable and the brake pedal slowly sinks. I have to put my car in park to keep from rolling into vehicles at stop lights and hope and pray that they hold/ work when I am in traffic. I’ve read many many forums with people with the same issues and Toyota cannot find the problem yet these people are being told that it’s “normal”. This is a major safety concern and could cause someone to wreck. I’m shocked that Toyota has not done a recall on this braking system, but something needs to be done about it.

• Mar 9, 2023MD
  Fuel/propulsion system · Suspension
  On7/2022 when I came out of my house in the evening my 2018 4Runner was not been running for hours But I heard my Fuel pump running with no keys in the switch Would not stop running until I turned the switch on and then turned it back off and then fuel pump stopped running I reported to my…

  On7/2022 when I came out of my house in the evening my 2018 4Runner was not been running for hours But I heard my Fuel pump running with no keys in the switch Would not stop running until I turned the switch on and then turned it back off and then fuel pump stopped running I reported to my dealer but they didn’t seem interested so I am Sending this to you any thing I tell the dealer where I got my 2018 4Runner Service dealer seems to go unheard. I got my 2018 4 runner brand new in 2018 and I was having issues with the 4Runner Shaking in the front end and steering wheel and took it back more than 5 times but only to be told it was nothing but. I am still having problems with it but they have not fixed it or anything

• Apr 28, 2022HI13,290 mi
  Structure › Frame and members
  The contact owns a 2018 Toyota 4Runner. The contact stated that the frame holding the radiator of the vehicle was severely rusted. The vehicle was taken to the dealer where it was diagnosed that the radiator frame was corroded; however, the dealer applied paint to the structure instead of replacing…

  The contact owns a 2018 Toyota 4Runner. The contact stated that the frame holding the radiator of the vehicle was severely rusted. The vehicle was taken to the dealer where it was diagnosed that the radiator frame was corroded; however, the dealer applied paint to the structure instead of replacing the part under warranty. The contact later noticed that the radiator frame was corroded. The vehicle was taken back to the dealer who informed the contact that the radiator frame needed to be replaced and the repair would be completed at her own expense as the vehicle was out of warranty. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 13,290.

• Apr 15, 2022TN30,500 mi
  Fuel system, gasoline › Delivery › Fuel pump
  The contact owns a 2018 Toyota 4Runner. The contact stated while driving approximately 25 MPH, the vehicle stalled. The traction control and check engine warning lights were illuminated. The vehicle was towed to a local dealer to be diagnosed. The contact was informed that the fuel pump needed to…

  The contact owns a 2018 Toyota 4Runner. The contact stated while driving approximately 25 MPH, the vehicle stalled. The traction control and check engine warning lights were illuminated. The vehicle was towed to a local dealer to be diagnosed. The contact was informed that the fuel pump needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 30,500.

• Feb 17, 2022NJ
  Power train
  The front differential in our 2018 Toyota 4Runner failed. This caused damage to one of the front axels of the vehicle. The failure can cause difficulties in turning the vehicle. The failure can lead to catastrophic failure of the axels, leading to the wheels to lock up. The problem is…

  The front differential in our 2018 Toyota 4Runner failed. This caused damage to one of the front axels of the vehicle. The failure can cause difficulties in turning the vehicle. The failure can lead to catastrophic failure of the axels, leading to the wheels to lock up. The problem is reoccurring in model years 2016-2019. Toyota is aware of the problem and has issued bulletins (see Toyota Technical Service Bulletin T-TCI-5185 Rev.1, dated 4/5/2019). Yet, Toyota refuses to offer a cost free repair of the failure/damage. The failure was inspected and confirmed by an authorized Toyota dealership on 2/9/2022. The failure had no warning signs/indicators. The failure began approximately 30-45 ago with a faint grinding sound coming from the drivetrain while driving.

• Jun 29, 2021TX
  Steering

  Vehicle steering shakes between 60-65 mph. After 4 different sets of tires in 3 weeks, multiple road force balances, tire rotations, an alignment, an alignment checks, brakes checked, a “visual inspection” of suspension components from two Toyota dealerships, the vehicle continues to vibrate at highways speeds.

• Jun 9, 2021AL
  Tires › Sidewall · Tires › Tread/belt

  Yes tire is available Tire has bad spot on sidewalk goes all the way to belt Looks like this tire might blow out which could cause crash Tuscaloosa Toyato first noticed it at our 30,000 mile maintenance service on June 9 2021 No inspection yet No warning have no ideal how long been like this

• May 17, 2021WA
  Unknown or other
  I noticed a crack forming in the windshield without seeing any signs of an impact. I took it in and Toyota had found a small indentation along the crack line that they claimed to be what caused the crack. This indentation along the crack line was superficial and did not have any of the "spider…

  I noticed a crack forming in the windshield without seeing any signs of an impact. I took it in and Toyota had found a small indentation along the crack line that they claimed to be what caused the crack. This indentation along the crack line was superficial and did not have any of the "spider legs" type crack lines out of it. I have had older vehicles in the Pacific Northwest without this issue, and I thought this was odd so I took it to a 3rd party Master Window repair technician not associated with Toyota and they diagnosed it as a stress crack related to the heating element.

• Mar 29, 2021AL
  Fuel system, gasoline
  TL* the contact owns a 2018 toyota 4runner. The contact received notification of nhtsa campaign number: 20v682000 (fuel system, gasoline) however, the part to do recall repair was unavailable. Tuscaloosa toyota (3325 skyland blvd e, tuscaloosa, al 35405, (205) 553-3325) was contacted and it was…

  TL* the contact owns a 2018 toyota 4runner. The contact received notification of nhtsa campaign number: 20v682000 (fuel system, gasoline) however, the part to do recall repair was unavailable. Tuscaloosa toyota (3325 skyland blvd e, tuscaloosa, al 35405, (205) 553-3325) was contacted and it was confirmed that parts were not yet available. The manufacturer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. Vin tool confirms parts not available.

• Mar 26, 2021WV
  Fuel system, gasoline
  TL* the contact owns a 2018 toyota 4runner. The contact received notification of nhtsa campaign number: 20v682000 (fuel system, gasoline) however, the part to do the recall repair was unavailable. The contact called moses toyota (1433 maccorkle ave, st albans, wv 25177) where it was confirmed that…

  TL* the contact owns a 2018 toyota 4runner. The contact received notification of nhtsa campaign number: 20v682000 (fuel system, gasoline) however, the part to do the recall repair was unavailable. The contact called moses toyota (1433 maccorkle ave, st albans, wv 25177) where it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10247800TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
• 10245488Ti: technical instructions for limited service campaign K0P customer support program 19te12 safety connect system ? Vehicle location inaccurate certain 2013 ? 2019 model year 4runner 2011 ? 2017 model year land cruiser 2013 ? 2017 model year prius 2012 ? 2017 model year prius v 2016 ? 2017 model year mirai updated 010/25/2023
• 10245487DP: The Data Communication Module (DCM) in the subject vehicles are equipped with software to identify the location of the vehicle using the Global Positioning System (GPS) to support features of the Safety Connect system. Due to incorrect programming in the DCM software, after November 2nd, 2019, the GPS coordinates for this system will be calculated incorrectly. This will cause the system to use incorrect vehicle coordinates if one of the system?s features is activated.
• 10245468TSB: Some 2015 ? 2023 model year TRD Pro Edition 4Runner vehicles may exhibit an abnormal noise when in Reverse with the wheels at or near full lock due to interference between the tire and bumper and/or fender liner. Follow the Repair Procedure in this bulletin to address this condition.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10244111TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10235218DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Toyota?s agreement to provide a Customer Support Program for certain 2015-2020 model year (MY) vehicles that were not previously involved in a Safety Recall or Special Service Campaign related to the low pressure fuel pump. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
• 10235217DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Toyota?s agreement to provide a Customer Support Program for certain 2014-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20TA02, Safety Recall 21TA03, Safety Recall 21TA05 or Special Service Campaign 21TC03. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
• 10235216TSB: Some 2014 ? 2020 model year Toyota vehicles may exhibit a hard start and/or MIL ON condition with one or more of the following Diagnostic Trouble Codes (DTCs): ?DTC P0171 and/or P0174 (System Too Lean Bank 1/Bank 2) ?DTC P0087 Fuel Rail / System Pressure ? Too Low Techstream data list analysis may reveal positive fuel trims including a no pressure condition verified by a manual fuel pressure gauge. Follow the Repair Procedure in this bulletin to address these conditions.
• 10230356TI: 19TE12 Expired on December 1, 2022
• 10230355DP: Customer Support Program 19TE12 expired December 1, 2022.
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10224177TT: If you see this condition, please create a TAS case and contact TAS for instruction prior to diagnosing or repairing of the vehicle. If it is a weekend or holiday, continue with diagnosis and repair. Please save all parts and/or details and contact TAS on the next available workday.
• 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
• 10224102TSB: Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 01013E), Entune? Audio Plus (version 010156 or 01015C), or Entune? Premium Audio (versions 010171, 010170, or 01017D) may exhibit one or more of the following conditions: ?Head unit reboots at a specific location. ?Abnormal Destination Search app operation. ?Rebooting caused by no songs on the USB-connected iPhone. ?A one-time reboot after ignition is cycled to ACC-ON. ?Audio stays muted after the key is cycled. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010144), Entune? Audio Plus (version 01015E), Entune? Premium Audio (version 010182), or earlier may exhibit one or more of the following conditions: ?Head unit reboots intermittently. ?Home screen intermittently half blank after shifting out of reverse, if the driver uses reverse after using the maintenance reminder screen. ?Screen freezes during an incoming phone call. ?Incorrect time displays on the diagnostic menu. ?Radio station information does not match the radio station that is playing.?Abnormal playlist browsing operation. ?Mute stays enabled after key cycle. ??Search along my route? is inoperative. ?Traffic data scales improperly. ?Unit of measure is missing from distance to destination (showing ?11? instead of ?11mi/km?). ?Multi-information display (MID) compass does not match navigation screen when switching to North up. ?Navigation does not match MID when switching from miles to kilometers. ?Speed limit is blank on navigation screen. ?Go button on VR screen is inoperative. Some 2016 ? 2018 model year Toyota vehicles equipped with Entune? Audio (version 010145), Entune? Audio Plus (version 010161), Entune? Premium Audio (version 010189), or earlier may exhibit one of the following conditions: ?Map will not display after it has been reprogrammed from the map micro SD card. Updated system software is now
• 10220246TT: If you see this condition, please create a TAS case and contact TAS for instruction prior to diagnosing or repairing of the vehicle. If it is a weekend or holiday, continue with diagnosis and repair. Please save all parts and/or details and contact TAS on the next available workday
• 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition

Every Toyota 4RUNNER model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.