2006 Toyota 4RUNNER
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › 4RUNNER › 2006
These records cover every 2006 Toyota 4RUNNER. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2006 Toyota 4RUNNER. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2003-2006 Toyota Land Cruiser and Lexus LX470, 2005-2006 Toyota Tundra and Sequoia, 2004-2006 Toyota 4Runner and Lexus GX470 vehicles equipped with side curtain-shield-air bags. The affected vehicles have an air bag control module that may be improperly programmed, causing…
Risk and remedy
Risk
If the side curtain-shield-air bags deploy unexpectedly, it can increase the risk of occupant injury.
Remedy
Toyota will notify owners, and dealers will replace the air bag control module with one that has improved programming, free of charge. The recall began on December 1, 2016. Owners may contact Toyota customer service at 1-888-271-9371. Toyota's number for this recall is G0C and GLB.
Toyota IS recalling certain model year 2008 through 2011 lexus lx570, 2003 through 2009 toyota 4runner, and 2006 through 2010 RAV4 vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
The remedy IS now available. the safety recall began early april 2011. The remedy will involve modification or replacement of the accelerator pedal and replacement of any toyota all-weather floor mat. owners may contact toyota at 1-800-331-4331 or lexus at 1-800-255-3987.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Owner complaints
381 complaints28 involved a crash3 involved a fire18 injuries
What owners report most
Latest complaints
- Unknown or other
During routine maintenance, we noticed frame rot.
- Unknown or other
unknown, vehicle started to leak a fluid, took vehicle to mechanic shop they said frame rotted to the point they would not let me drive it home had to have it towed and now without transportation. the almost identical frames on other toyota vehicles were recalled for exactly the same problem. i dont understand why toyota will stand behind some of their vehicles and take care of some of the toyota owners but not all.
- Structure › Body
Frame is rotting away. The tacomas, tundras, sequoia were recalled for this issue. The tacomas frame is very close in design to the 4runner. The main difference is the 4runner uses coil springs whereas the tacoma used leaf springs. Toyota stated that because the 4runner was made in Japan unlike the…
Frame is rotting away. The tacomas, tundras, sequoia were recalled for this issue. The tacomas frame is very close in design to the 4runner. The main difference is the 4runner uses coil springs whereas the tacoma used leaf springs. Toyota stated that because the 4runner was made in Japan unlike the others that were made in the USA, that the 4runners were not part of the recall.most of the 4runners that are no longer drivable, are because of rotted frames. The repair kits that fix the rotted frames on the tacomas are the same kits that fix the 4runners. Now toyota won't even touch my vehicle for other repairs because of the rot holes.
- Visibility/wiper
MYself and my fiancee were driving to our family's home, the rear defrost was on due to foggy windows as we were driving down the road there was a loud noise from the back half of the 4 runner. I had turned and looked back behind me and the rear hatch window was completely shattered. Its still intact in the window frame but about to fall out. This happened out of nowhere no warnings or anything.
- Structure › Body
The frame under the car rusted so much that the gas tank literally fell through the frame to the ground. This put my son at risk and fortunately he was able to pull over in a residential area and exit the vehicle. A mechanic and welding company both assessed the vehicle and acknowledged the u…
The frame under the car rusted so much that the gas tank literally fell through the frame to the ground. This put my son at risk and fortunately he was able to pull over in a residential area and exit the vehicle. A mechanic and welding company both assessed the vehicle and acknowledged the u unusual and excessive rusting. In researching online and speaking to car experts, this seems and is confirmed to be poor manufacturing and materials used for the frame.
- Unknown or other
Excessive frame corrosion
- Structure › Body
Dangerous and rusted through frame. The vehicles frame should have been recalled like the other Toyotas affected.
- Structure › Body · Unknown or other
We took the vehicle in for inspection and it failed due to the exhaust leaks, and more importantly the frame rusting out. We never received the recall notice for this issue. We have owned this vehicle for many years, so there is no reason we would not have been notified for the recall of the…
We took the vehicle in for inspection and it failed due to the exhaust leaks, and more importantly the frame rusting out. We never received the recall notice for this issue. We have owned this vehicle for many years, so there is no reason we would not have been notified for the recall of the frame. The vehicle was just serviced last year and we spent a great deal of money to keep it running properly so we would not have any issues and it would last us for quite a long time to come. With the frame being rusted through, there is simply no way to keep this vehicle safe. Toyota did not notify customers that had the vehicles with the frame issue. This is something that is simply not acceptable. We are a family of Toyota owners and have always depended on the reliability of them. Finding this out has really shocked us and honestly diminished our trust in the Toyota reliability. Is Toyota willing to fix this issue, are we just stuck with this. Please help.
- Structure › Body · Suspension
My 4runner have major frame rust issues and is a major safety hazard. This a known issue to Toyota and a recall needs to be made.
- Air bags
The contact owned a 2006 Toyota 4Runner. The contact stated that her son was driving at an unknown speed when another vehicle pulled in front of them to change lanes without warning causing her son to t-bone the vehicle and sending the other driver's vehicle to spin crashing into other vehicles…
The contact owned a 2006 Toyota 4Runner. The contact stated that her son was driving at an unknown speed when another vehicle pulled in front of them to change lanes without warning causing her son to t-bone the vehicle and sending the other driver's vehicle to spin crashing into other vehicles nearby. The air bags deployed however their son received 2nd-degree burns on their right and 1st-degree burns on their lower region, and a concussion. The contact was unable to confirm if any other persons received injuries but was able to confirm other vehicles were damaged from the crash. Medical attention was needed. A police report was filed. The vehicle was towed to their insurance company's facilities who had stated the vehicle was totaled. The dealer was not contacted. The manufacturer was not made aware of the failure. The failure mileage was unknown. The VIN was not available.
- Suspension · Unknown or other · Wheels
UNKNOWN, found excessive rust on undercarriage
- Visibility/wiper
The rear window on my 2006 4Runner suddenly shattered. I had just cleared the car of snow, put my son in the car and left the house. Less than 1/10th of a mile down the road it exploded. Glass could have gone all over the child in the backseat. There have been past issues. Toyota offered an extended warranty on the part until 2018, so they are aware of the problem. Not yet. No warnings.
- Structure › Frame and members
The contact owns a 2006 Toyota 4Runner. The contact stated that after a State Inspection, the vehicle was declared unsafe to drive on the State roadways due to severe corrosion. The contact stated no warning light was illuminated. The contact had taken the vehicle to a local dealer, where it was…
The contact owns a 2006 Toyota 4Runner. The contact stated that after a State Inspection, the vehicle was declared unsafe to drive on the State roadways due to severe corrosion. The contact stated no warning light was illuminated. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the subframe needed to be replaced due to extensive corrosion. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 140,000.
- Trailer hitches
While towing a 16' utility trailer using the 2" ball on a Switch Ball #42178, the ball separated from the shank. I was driving my 2007 Toyota 4Runner traveling on the highway at about 60mph at the time. Fortunately the safety chains did their job and prevented the trailer from completely…
While towing a 16' utility trailer using the 2" ball on a Switch Ball #42178, the ball separated from the shank. I was driving my 2007 Toyota 4Runner traveling on the highway at about 60mph at the time. Fortunately the safety chains did their job and prevented the trailer from completely disconnecting from the vehicle. Upon stopping my vehicle several hundred feet after separation, I found the 2" ball still locked and secured inside of the trailer's coupler, and the shank still securely attached to my vehicle. As a result my rear bumper is now heavily damaged from the trailer contacting it after uncoupling from the vehicle. I'm glad nobody was hurt or killed as a result of this incident. If the safety chains had not done their job, the unattached trailer could have caused serious damage, injury, and/or death. This incident could have also resulted in losing control of my vehicle, which thankfully I did not. This Switch Ball #42178 was purchased in September of 2022 and this was the first time I've used it. At the time of the incident I had towed the trailer approximately 75 miles. I have a background in selling and installing utility trailers and towing accessories. I'm confident the product was installed and used as directed. I contacted Curt Manufacturing with the above concerns. At their request I shipped the trailer ball to them for inspection. They have denied any responsibility stating their product did not fail. They have blamed the incident on "user error". I'm happy to share all communication with the NHTSA. I am including pictures of the damage to my bumper which was caused by the trailer after the Curt ball became disconnected from it's mating shank. I can share more about my assessment of why this failure occurred upon request.
- Structure › Body · Suspension
My control arm ripped completely off my fram on the passenger side due to excessive rust putting me and my family and any one else on the road at risk of something catastrophic.
- Service brakes
Corrosion of pistons in front brake calipers results in an increase in braking stopping distance. Everytime the front brake pads are replaced the same issue is encountered, defect has taken place three times. In the four piston brake caliper the inside pistons on both the left and right caliper…
Corrosion of pistons in front brake calipers results in an increase in braking stopping distance. Everytime the front brake pads are replaced the same issue is encountered, defect has taken place three times. In the four piston brake caliper the inside pistons on both the left and right caliper are frozen in place . The brake pads on the outside position have twice as much wear as the inside pads. This is an indication of uneven braking leading to increased stopping distance . Toyota maintains , there is not a problem, yet in forums on the web there are many experiences with owners having the same problem , resulting in costly repair bills. There is no warning of reduced braking efficiency .
- Exterior lighting
The vehicle headlights have failed on multiple occasions. The cause of the failures was ingress of water into the sealed headlamp assembly. The problem was reported to Toyota. Toyota took no action regarding the reports. The entire headlight assembly was replaced three (3) times at our expense.…
The vehicle headlights have failed on multiple occasions. The cause of the failures was ingress of water into the sealed headlamp assembly. The problem was reported to Toyota. Toyota took no action regarding the reports. The entire headlight assembly was replaced three (3) times at our expense. The problem persists. Attached is a photograph of the second (replaced) clearly showing water inside the headlight assembly. The current (most recent replacement) has also experienced water ingress and is available for inspection. The subject vehicle was inspected by three different body shops (two if which are authorized Toyota shops). It was confirmed by all three shops that there is no vehicle design feature that could cause water ingress in the headlamp assembly. This is a serious safety issue and has been brought to Toyota's attention with no response.
- Unknown or other
The frame is corroded and rusted to the point that it’s not safe to drive. This was discovered by our service technician when we had the vehicle inspected for a rattling noise in the rear. I reached out to Toyota and was told that no problems are available regarding this issue. I have maintained my 4Runner meticulously and timely since I purchased brand new. There is no rust on the body, just the frame.
- Unknown or other
My 2006 4Runner Toyota frame is rusted and falling into pieces. From the rear especially and underneath. I’m scared if someone rear ends me that the impact could be life threatening due to the frame falling to pieces as I drive and the vehicle sits.
- Suspension
My car is a 2006 Toyota 4Runner. This past summer I had a tire leaking and took it to the garage for repair. The mechanic stated that the frame is rusting out in the front right, tire rod area, and saw a pinhole. Last week I took the vehicle to get a transmission oil change. That mechanic saw…
My car is a 2006 Toyota 4Runner. This past summer I had a tire leaking and took it to the garage for repair. The mechanic stated that the frame is rusting out in the front right, tire rod area, and saw a pinhole. Last week I took the vehicle to get a transmission oil change. That mechanic saw that there's more rust that is spreading throughout the entire frame, worse than the area found from just a few months ago. I learned online that Toyota had purposely used cheap steel for the frame and had replaced the same frame used on other trucks such as the Tacoma and Highlander but is refusing to replace the 4Runner. These rusted out frames are affecting many 4Runners. I have a 1964 Cadillac and that frame is in better condition than the 4Runner. I'm forced to pay $15,000 to replace the frame or salvage my car. It shouldn't have come to this, especially when the same frame that was replace on other trucks isn't being replaced for mine.
- Unknown or other
My 17 year old son was parked and when he turned off the defrost the rear hatchback glass shattered. This scared him a lot as we do not know what happened and thankfully he was parked not driving. This is a safety and potentially dangerous issue. We purchased this used vehicle and had Toyota…
My 17 year old son was parked and when he turned off the defrost the rear hatchback glass shattered. This scared him a lot as we do not know what happened and thankfully he was parked not driving. This is a safety and potentially dangerous issue. We purchased this used vehicle and had Toyota thoroughly inspect and update and upgrade anything he needed and they never told us this was an issue. We researched it online and it has been an issue. This should have been addressed and recalled. I brought in vehicle so that they can fix it and they are saying they won’t even though it’s their equipment defect.
- Unknown or other
The frame of the vehicle was corroding as if it was not sealed effectively. The frame rotted to point where vehicle began swaying on road and during mechanic check the frame bent when vehicle placed on a lift. I am original owner of vehicle and took the vehicle to local Toyota dealership for ALL…
The frame of the vehicle was corroding as if it was not sealed effectively. The frame rotted to point where vehicle began swaying on road and during mechanic check the frame bent when vehicle placed on a lift. I am original owner of vehicle and took the vehicle to local Toyota dealership for ALL scheduled maintenance. The Toyota dealer mechanics NEVER reported signs of corroding frame damage in the vehicle bumper to bumper checks during my scheduled maintenance appointments. I was never informed of any signs of rotting or corroding on the frame.
- Unknown or other
Under carriage and frame rust due to bad frames that caused a recall on other Toyota models that were settled, but not the 4 Runner.
- Suspension · Unknown or other
I have a 2006 Toyota 4Runner. I also have a 2005 GMC Sierra, but this 4Runner's frame is absolutely toast, while the GMC is completely fine. Toyota issued recalls on the tacoma, tundra, and the sequoia, so why not the 4Runner? My car started swaying and violently shaking on the highway. I pulled…
I have a 2006 Toyota 4Runner. I also have a 2005 GMC Sierra, but this 4Runner's frame is absolutely toast, while the GMC is completely fine. Toyota issued recalls on the tacoma, tundra, and the sequoia, so why not the 4Runner? My car started swaying and violently shaking on the highway. I pulled over and looked underneath, only to see the rear section of the frame had completely disconnected. This could have caused a major accident or even death if I did not catch it soon enough. This is a MASSIVE safety issue, and if people do not know what to look for with these, Toyota will be seeing a lot of wrongful death lawsuits.
- Steering · Structure › Body
My 4runner was purchased from a dealership and serviced there for rust related problems several times but was never told I had a serious rust problem. The problem is the frame has prematurely rusted and now the car is unsafe to drive due to the control arm rusting off the frame
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Frame corrosion
On August 7, 2018, the Office of Defects Investigation (ODI) received a defect petition from Mr. Gary Weinreich alleging premature frame corrosion failure in model year (MY) 2002 - 2006 Toyota 4Runner vehicles. The petitioner based his request upon a corrosion-related front suspension failure he experienced in his MY…
On August 7, 2018, the Office of Defects Investigation (ODI) received a defect petition from Mr. Gary Weinreich alleging premature frame corrosion failure in model year (MY) 2002 - 2006 Toyota 4Runner vehicles. The petitioner based his request upon a corrosion-related front suspension failure he experienced in his MY 2005 Toyota 4Runner, a class action lawsuit settlement involving other Toyota products, and other complaints of underbody corrosion in Toyota 4Runner vehicles that he found in NHTSA?s online complaint database. The petitioner submitted a complaint to NHTSA documenting his experience (NHTSA ID 11098055). On August 17, 2018, ODI opened DP18-002 to evaluate the petitioner?s request. ODI?s evaluation included information provided by the petitioner regarding his vehicle, facts related to the class action lawsuit cited by the petitioner, and consumer complaint data received by NHTSA regarding underbody corrosion in third and fourth-generation Toyota 4Runner vehicles.The undercarriage of the petitioner?s vehicle exhibited severe corrosion damage indicative of seawater immersion. The vehicle?s service history shows that concerns with underbody corrosion were first noted by a Toyota dealer in a multi-point vehicle inspection performed on April 28, 2011. The invoice for that inspection noted ?severe and excessive amount of rust on the undercarriage and on the drive shaft transmission.? Two years later, on October 21, 2013, another multi-point inspection by a Toyota dealer observed further progression of underbody corrosion damage, noting: ?rust on shocks/struts and other components,? ?rust on exhaust system,? ?both splash shields severely rusted,? and ?undercarriage very rusty.? On July 17, 2017, approximately 10 months prior to experiencing the suspension failure incident, an independent repair facility performing routine oil change and brake maintenance informed the Petitioner of a concern with ?excessive frame corrosion? on his vehicle. The service history, severe general corrosion damage, failure age, and environment do not support the petitioner?s allegation of premature corrosion failure.ODI?s analysis of NHTSA complaint data identified fifteen incidents of front lower control arm failure in fourth-generation Toyota 4Runner sport utility vehicles. Two of the failures, including the petitioner?s vehicle, involve vehicles operated in ocean front communities with continuous exposure to aerosolized marine salts and potential exposure to seawater immersion. The remaining thirteen failures all involved vehicles owned or previously registered in states with the greatest use of deicing salts to treat road surfaces in winter months (?Salt states?). On average, the front lower control arm failures occurred after 13.1 years in service in highly corrosive environments. The failure ages and environments do not support the petitioner?s allegation of premature corrosion failure. NHTSA is authorized to issue an order requiring notification and remedy of a defect if the Agency?s investigation shows a defect in design, construction, or performance of a motor vehicle that presents an unreasonable risk to safety. 49 U.S.C. ?? 30102(a)(9), 30118. Since the information before the Agency is not indicative of a vehicle-based defect, it is unlikely that any investigation opened because of granting this petition would result in an order concerning the notification and remedy of a safety-related defect. Therefore, upon full consideration of the information presented in the petition and the potential risks to safety, the petition is denied. The denial of this petition does not foreclose the Agency from taking further action if warranted or the p
- Unintended and Uncontrolled Acceleration
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested…
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested information regarding potential electronic causes of unintended acceleration in Toyota and Lexus vehicles.I. Pedal Interference from Floor mats, Carpet Covers and Plastic Pads in Carpets.During the RQ10-003 investigation, ODI reviewed a large volume of documents to assess whether additional vehicles should be recalled.Following the agency's analysis, NHTSA requested that Toyota recall additional vehicles.Toyota complied with the agency's request.The details of these recalls are set forth more fully in Toyota's reports to NHTSA pursuant to 49 CFR Part 573.These recalls are as follows:Recall 11V-112: (1) model year (MY) 2004-2006 Toyota Highlander and Highlander Hybrid; and, (2) MY 2004-2007 Lexus RX330,RX350, and RX400h (hybrid model). The total estimated population under this recall is 769,379 vehicles.This recall remedies potential accelerator pedal entrapment caused by a loose floor carpet cover (trim panel). Recall 11V-113: (1) MY 2003-2009 through 2009 Toyota 4Runner; (2) MY 2006-2010 Toyota RAV4; and, (3) MY 2008-2011 Lexus LX570.The total estimated population under this recall is 1,381,000 vehicles.This recall supplements recall 09V-388 and remedies potential accelerator pedal entrapment by an unsecured floor mat.Recall 11V-115: (1) MY 2006-2007 Lexus GS300 (all wheel drive vehicles); and, (2) MY 2006-2007 Lexus GS350 (all wheel drive vehicles). The total estimated population under this recall is 19,647 vehicles.This recall remedies potential accelerator pedal entrapment caused by inadequate clearance between the pedal linkage and a plastic pad embedded in the vehicle's carpet.II. Potential Electronic Causes of Unintended Acceleration.After NHTSA opened RQ10-003, NHTSA launched a ten-month study of potential electronic causes of unintended acceleration in Toyota vehicles.NHTSA launched the study in the spring of 2010 in light of concerns aired in Congressional hearings.NHTSA enlisted engineers at the National Aeronautics and Space Administration (NASA) with expertise in areas such as computer controlled electronic systems, electromagnetic interference and software integrity to assess whether electronic systems or electromagnetic interference played a role in incidents of unintended acceleration in Toyota vehicles.That study has concluded.Two reports are associated with the study and are available on NHTSA's website.NASA's report is entitled Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, NESC Assessment No. TI-10-00618 (Jan. 18, 2011).NHTSA's report is entitled Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems (Feb. 2011).Both reports should be read in conjunction with each other. As stated in its report, NASA did not find an electronic cause of large throttle openings that can result in unintended acceleration incidents. NHTSA did not find a vehicle-based cause of unintended acceleration incidents other than the physical pedal interference causes that are being addressed by Toyota's recalls. This RQ is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197494Technician Certification Requirements.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10182983TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10177782TSB: OBSOLETE NOTICE June 23, 2020: This bulletin is now obsolete. Please see T-SB-0063-20.
- 10177781TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST005-01, SU001-08, and T-SB-0391-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Toyota vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
Every Toyota 4RUNNER model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.