2008 Toyota 4RUNNER
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › 4RUNNER › 2008
These records cover every 2008 Toyota 4RUNNER. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2008 Toyota 4RUNNER. Newest first.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota IS recalling certain model year 2008 through 2011 lexus lx570, 2003 through 2009 toyota 4runner, and 2006 through 2010 RAV4 vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
The remedy IS now available. the safety recall began early april 2011. The remedy will involve modification or replacement of the accelerator pedal and replacement of any toyota all-weather floor mat. owners may contact toyota at 1-800-331-4331 or lexus at 1-800-255-3987.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Owner complaints
96 complaints10 involved a crash2 involved a fire9 injuries
What owners report most
Latest complaints
- Electrical system · Power train
Diagnosis found trans fluid wicking up harness to engine ecm contaminating harness and ecu given false/abnormal readings at ecm. Extensive repairs necessary w/ internal trans wire replacement, engine harness replacement & engine ecu replacement. Other cleaning may be necessary or other harness replacement necessary [other]: transmission wire replacment [other]: engine harness replacement [other]: ecm replacement
- Vehicle speed control › Accelerator pedal
The contact owns a 2008 Toyota 4Runner. The contact stated while pulling out of a parking spot and depressing the brake pedal, the vehicle accelerated unintendedly. The contact stated that she might have shifted into park(P) and stopped the vehicle. Additionally, the contact stated while at a…
The contact owns a 2008 Toyota 4Runner. The contact stated while pulling out of a parking spot and depressing the brake pedal, the vehicle accelerated unintendedly. The contact stated that she might have shifted into park(P) and stopped the vehicle. Additionally, the contact stated while at a complete stop in an intersection and depressing the brake pedal, the vehicle accelerated unintendedly and crashed into a first vehicle, which rear-ended a second vehicle. The air bags did not deploy. The driver of the second vehicle stated that she had sustained injuries but did not receive medical assistance. The contact and the other drivers were able to drive from the scene. The police department was contacted and informed the contact that no report was filed because there was no injury sustained. The dealer was not notified of the failure. The vehicle was not diagnosed or repaired. The contact stated that the failure could be related to NHTSA Campaign Number: 11V113000(Vehicle Speed Control); however, the contact stated that upon inspecting the accelerator pedal after each incident, the pedal did not seem to be entrapped. It was unknown whether the manufacturer was notified of the failure. The failure mileage was approximately 60,000.
- Air bags
On August 11th 2024 at approximately 8:30PM I was hit on the passenger side of my vehicle. As a result both passenger doors were smashed in. And had also been shoved into the car and causing the passenger seat to be stuck between the doors and center console. There was ZERO airbag deployment. There…
On August 11th 2024 at approximately 8:30PM I was hit on the passenger side of my vehicle. As a result both passenger doors were smashed in. And had also been shoved into the car and causing the passenger seat to be stuck between the doors and center console. There was ZERO airbag deployment. There are 3 known airbags on that side of the vehicle and not one went off. The accident could have been A LOT worse then it was but knowing now what I do about the air bags I regret buying this vehicle. And I am very emotional unwell knowing that the vehicle failed to get me and my passenger safer in the accident.
- Unknown or other
Hitch bent when pulling small ATV trailer. Under inspection of vehicle found the frame rusted out at the rear crossmember. Called Toyota @[XXX], they stated no coverage for this condition. Case #[XXX]. If this broke off it could have killed someone. This was verified at a Toyota dealer at last service. (7/5/23) INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Power train · Service brakes
The actuator in the transfer case went bad in such a way as to not allow the vehicle either move (under its own power) or to be in a parked state; though the shifter and indicator lights indicated PARK and although you could turn off the vehicle and also remove the key, the vehicle was actually in…
The actuator in the transfer case went bad in such a way as to not allow the vehicle either move (under its own power) or to be in a parked state; though the shifter and indicator lights indicated PARK and although you could turn off the vehicle and also remove the key, the vehicle was actually in a NUETRAL state that allowed the vehicle to freely roll. I put something behind the tire THANK GOODNESS I noticed! Anyway, Toyota wants more than the vehicle is worth to fix it so my mechanic replaced the transfer case with a used one. I've heard of others having this problem and it seems like it could be a safety-related concern. And an expensive concern, as well.
- Structure › Frame and members › Underbody shields · Suspension
The contact owns a 2008 Toyota 4Runner. The contact stated that upon taking the vehicle for the State Inspection, he was informed that the vehicle could not be inspected due to severe subframe corrosion. The contact stated that her son, an independent mechanic, later determined that the entire…
The contact owns a 2008 Toyota 4Runner. The contact stated that upon taking the vehicle for the State Inspection, he was informed that the vehicle could not be inspected due to severe subframe corrosion. The contact stated that her son, an independent mechanic, later determined that the entire subframe and suspension of the vehicle were severely corroded. The contact stated that the vehicle was undrivable. The dealer and the manufacturer were not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 83,600.
- Engine · Structure › Body
I'm experiencing major frame rust mainly at the crossbeams and all over the frame. Metal is literally crumbling away if I touch if. I don't even want to remove the rust to prepare for anti-rust coating since there may not be much metal left. Its only at 150k miles and shouldnt be crumbling away…
I'm experiencing major frame rust mainly at the crossbeams and all over the frame. Metal is literally crumbling away if I touch if. I don't even want to remove the rust to prepare for anti-rust coating since there may not be much metal left. Its only at 150k miles and shouldnt be crumbling away this fast. Just recently had to replace muffler and tailpipe since the muffle connection literally rusted away. Tacomas were able to have their frames replaces. The 4runner has a similar if not identical frame due to them sharing the same underlying platform. This should be pretty obvious that 4Runners need to be a part of that recall.
- Structure › Body
Lots of rust on frame and body. This is certainly an excessive amount. Many other owners of the 4runner between 2003-2009 are experiencing the same problem.
- Power train · Service brakes · Steering
Vehicle displayed a check engine light due to a non sealing gas cap. this condition also disables the stability control system. vehicle lost control on wet conditions and was unable to recover due to all traction and stabilization systems being turned off due to a check engine light (faulty gas…
Vehicle displayed a check engine light due to a non sealing gas cap. this condition also disables the stability control system. vehicle lost control on wet conditions and was unable to recover due to all traction and stabilization systems being turned off due to a check engine light (faulty gas cap). I have owned the vehicle for 6 years and have put over 80,000 miles on it without incident. vehicle was in motion traveling the speed limit on a rainy road.*dt *tr
- Unknown or other
Door lock actuator failure
- Service brakes · Structure › Body
Entire underbody of car IS rusting out, tail gate already had 2 body repairs but keeps rusting out. Many parts at just 150K were already replaced due to severe rust- most suspension parts, transmission cooling lines, exhaust , skid plates all failed. Brake calipers failed 4 times in in 6 years.
- Structure › Body · Suspension · Unknown or other
Excessive frame rust IS rendering the vehicle unsafe to operate. *Tr
- Unknown or other
Frame rust. I have seen the recalls on other toyota vehicles of the era due to premature frame rust. I know that the 4runner should be on this list as well. It's rare to see a 4runner with no frame rust. The frame rusts before any other part of the vehicle. *tr
- Structure › Body
TL* the contact owns a 2008 toyota 4runner. While driving various speeds, the contact heard a rattling noise. The vehicle was taken to an independent mechanic who stated that the frame was rusted and the top control arm post was melted. Another independent mechanic stated that a mounting plate…
TL* the contact owns a 2008 toyota 4runner. While driving various speeds, the contact heard a rattling noise. The vehicle was taken to an independent mechanic who stated that the frame was rusted and the top control arm post was melted. Another independent mechanic stated that a mounting plate needed to be replaced. The mechanic stated that the vehicle could not be driven because the control arm could detach and strike the fuel tank. The local dealer and manufacturer were not contacted. The vehicle was not diagnosed or repaired. The failure mileage was 162,000.
- Structure › Body
Vehicle's frame IS very corroded overall and it has more than 15 inch long hole in the frame on the passenger front frame rail. It has been checked by toyota dealership and determined unsafe to drive. vehicle has only 90,000 miles and it IS overall in excellent condition.
- Electrical system
TL* the contact owns a 2008 toyota 4runner. While driving 50 mph, there was an odor of burning wires and smoke coming from the steering area. There were no warning indicators illuminated. The contact coasted the vehicle to the side of the road and waited one hour. The vehicle was restarted and was…
TL* the contact owns a 2008 toyota 4runner. While driving 50 mph, there was an odor of burning wires and smoke coming from the steering area. There were no warning indicators illuminated. The contact coasted the vehicle to the side of the road and waited one hour. The vehicle was restarted and was driven to the contact's residence. The contact called victoria toyota (located at 5 heitzinger plaza, seaside, ca 93955, (831) 393-3020) and scheduled a diagnostic appointment. The manufacturer was not made aware of the failure. The vehicle was not repaired. The approximate failure mileage was 185,000.
- Service brakes
I have gone through 2 sets of front brake calipers on my 2008 toyota 4runner. It IS a common issue where over time, the calipers will seize up and stick on. The only way to tell that there IS an issue IS either by touch, smell, or feel. touch, because the rotors get to be over 250 degrees and…
I have gone through 2 sets of front brake calipers on my 2008 toyota 4runner. It IS a common issue where over time, the calipers will seize up and stick on. The only way to tell that there IS an issue IS either by touch, smell, or feel. touch, because the rotors get to be over 250 degrees and they cannot be touched. smell, because the smell of burning brake pads IS present feel, because there IS a loss of braking. other than these indications, there IS no notice of seized calipers until it IS too late. this IS a common issue and has happened with most 4runner owners that I talk to. I'm surprised that this has not become an issue.
- Structure › Body
I have noticed a significant amount of rust on the frame of my vehicle. The rust IS apparent in many places along the frame, including parts that are integral to the chassis, such as the differential. I have read on many forums that this IS a known issue with this make and model vehicle. I would…
I have noticed a significant amount of rust on the frame of my vehicle. The rust IS apparent in many places along the frame, including parts that are integral to the chassis, such as the differential. I have read on many forums that this IS a known issue with this make and model vehicle. I would like to know my options for repairing this issue which if left unattended will damage parts (e.g. Differential) that are critical to the normal functions of my vehicle,
- Engine
Exhaust manifold cracking on toyota V8 4.7 engine allowing exhaust fumes into the cabin and causing dizziness. When doing my research ive seen pages and pages of this issue known to toyota about the 4.7 engine that IS used in a number of there models from lexus to the tundra pick lines and…
Exhaust manifold cracking on toyota V8 4.7 engine allowing exhaust fumes into the cabin and causing dizziness. When doing my research ive seen pages and pages of this issue known to toyota about the 4.7 engine that IS used in a number of there models from lexus to the tundra pick lines and anything that uses the 4.7 engine. this IS deadly being in the midwest and you have your windows up and heat on in the winter or summer with ac on. thank you for your time
- Power train · Service brakes · Suspension
Tamara recall prev owned veh, bought from dealership as "safe" to operate,110,000 mi on 11072016. prev owner and current owner had ve had veh serviced regularly. Undercarriage and braking noise while in motion on hwy. Rear door not able to open, manually or with remote. maint light and tire…
Tamara recall prev owned veh, bought from dealership as "safe" to operate,110,000 mi on 11072016. prev owner and current owner had ve had veh serviced regularly. Undercarriage and braking noise while in motion on hwy. Rear door not able to open, manually or with remote. maint light and tire light came on. post noise inspection by mechanic, left (?)front axle boot IS split. Front noise undetermined (sway bar links or strutts?) at this time. Rear left driver's side axle bearing and seal leaking transmission fluid(?) into brakes. Brakes affected by leaking fluid and will have to be replaced due to damage by fluid, which could cause brake failure while driving. rear door lock failure due to interior corrosion/rust. May need to be replaced.
- Power train
When driving, the car was making a thumping noise which went away when the brakes were applied. toyota dealer said it was a bent rear axle and would cost $2300 to replace. the vechicle IS in excellent condition with 108,000 miles. have never hit a big pothole or run over a curb. I believe it IS…
When driving, the car was making a thumping noise which went away when the brakes were applied. toyota dealer said it was a bent rear axle and would cost $2300 to replace. the vechicle IS in excellent condition with 108,000 miles. have never hit a big pothole or run over a curb. I believe it IS a defect that came with the car and showed up after driving for 10 years. there are a lot of bent axles reported over the internet on toyota trucks and suvsl more than any other vechiclel I have owned many many cars and suvs and never had a bent rear axle beforel dealer said I would get reimbursed if toyota issued a recall. very unhappy with this!
- Power train · Suspension · Unknown or other
Vehicles undercarriage including frame, rear axle and manifolds are so severely rusted that mechanics can not maintain it properly putting me at risk.
- Engine · Steering
Whenever I accelerate on the uphill or high accelerate then odor became really horrible, harsh smell, smell like tnt firework, either matches then egg rotten. I suspect the exhaust system seem faulty. I went multiple auto shop they mention it could be related to exhaust manifold but when I…
Whenever I accelerate on the uphill or high accelerate then odor became really horrible, harsh smell, smell like tnt firework, either matches then egg rotten. I suspect the exhaust system seem faulty. I went multiple auto shop they mention it could be related to exhaust manifold but when I described that the odor came out from outside not interior air vent then they started to re-check my exhaust and said I am all good to drive as well, its "ok". The odor IS frustrating, annoying. and the steering, I don't know how did my cv axle IS leaking, I hopefully it will not break out when I'm driving to other state.
- Power train · Suspension · Unknown or other
Frame rust IS so pervasive on my 2008 4runner that the toyota dealer refuses to make necessary repairs to transmission. The dealer suggested that I "walk away from the vehicle", citing future rust-related problems with caliper replacement and other routine maintenance. Rust on differential axle led…
Frame rust IS so pervasive on my 2008 4runner that the toyota dealer refuses to make necessary repairs to transmission. The dealer suggested that I "walk away from the vehicle", citing future rust-related problems with caliper replacement and other routine maintenance. Rust on differential axle led to the shearing off of the fluid drain bolt, rendering that impossible to drain/refill. attached are notes from the dealer's maintenance engineer, citing rusted cross member bolts and other components interfering with necessary repairs. I have serious concerns about the ongoing safety and road-worthiness of this vehicle.
- Structure › Body
Back hatch unlatches itself when hitting a bump and flies open. this has occurred multiple times, observed by several family members.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Unintended and Uncontrolled Acceleration
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested…
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested information regarding potential electronic causes of unintended acceleration in Toyota and Lexus vehicles.I. Pedal Interference from Floor mats, Carpet Covers and Plastic Pads in Carpets.During the RQ10-003 investigation, ODI reviewed a large volume of documents to assess whether additional vehicles should be recalled.Following the agency's analysis, NHTSA requested that Toyota recall additional vehicles.Toyota complied with the agency's request.The details of these recalls are set forth more fully in Toyota's reports to NHTSA pursuant to 49 CFR Part 573.These recalls are as follows:Recall 11V-112: (1) model year (MY) 2004-2006 Toyota Highlander and Highlander Hybrid; and, (2) MY 2004-2007 Lexus RX330,RX350, and RX400h (hybrid model). The total estimated population under this recall is 769,379 vehicles.This recall remedies potential accelerator pedal entrapment caused by a loose floor carpet cover (trim panel). Recall 11V-113: (1) MY 2003-2009 through 2009 Toyota 4Runner; (2) MY 2006-2010 Toyota RAV4; and, (3) MY 2008-2011 Lexus LX570.The total estimated population under this recall is 1,381,000 vehicles.This recall supplements recall 09V-388 and remedies potential accelerator pedal entrapment by an unsecured floor mat.Recall 11V-115: (1) MY 2006-2007 Lexus GS300 (all wheel drive vehicles); and, (2) MY 2006-2007 Lexus GS350 (all wheel drive vehicles). The total estimated population under this recall is 19,647 vehicles.This recall remedies potential accelerator pedal entrapment caused by inadequate clearance between the pedal linkage and a plastic pad embedded in the vehicle's carpet.II. Potential Electronic Causes of Unintended Acceleration.After NHTSA opened RQ10-003, NHTSA launched a ten-month study of potential electronic causes of unintended acceleration in Toyota vehicles.NHTSA launched the study in the spring of 2010 in light of concerns aired in Congressional hearings.NHTSA enlisted engineers at the National Aeronautics and Space Administration (NASA) with expertise in areas such as computer controlled electronic systems, electromagnetic interference and software integrity to assess whether electronic systems or electromagnetic interference played a role in incidents of unintended acceleration in Toyota vehicles.That study has concluded.Two reports are associated with the study and are available on NHTSA's website.NASA's report is entitled Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, NESC Assessment No. TI-10-00618 (Jan. 18, 2011).NHTSA's report is entitled Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems (Feb. 2011).Both reports should be read in conjunction with each other. As stated in its report, NASA did not find an electronic cause of large throttle openings that can result in unintended acceleration incidents. NHTSA did not find a vehicle-based cause of unintended acceleration incidents other than the physical pedal interference causes that are being addressed by Toyota's recalls. This RQ is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227915TI: TECHNICAL INSTRUCTIONS Customer Support Program ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10227914CSP: Customer Support Program ZKG ? Paint Repair Process
- 10227913DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227912DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211828DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.
Every Toyota 4RUNNER model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.