2010 Toyota RAV4
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › RAV4 › 2010
These records cover every 2010 Toyota RAV4. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
14 recalls name the 2010 Toyota RAV4. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2006-2011 Toyota RAV4 vehicles manufactured October 31, 2005, to September 7, 2010, and 2010 Lexus HS250h vehicles manufactured July 6, 2009, to August 26, 2010. The affected vehicles have rear suspension arms (rear tie rods) with adjusting lock nuts that may have been…
Risk and remedy
Risk
Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners and dealers will replace both rear suspension arms and encapsulate the locknuts, free of charge. The recall began on September 30, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are G0V for Toyota vehicles and GLK for Lexus vehicles. Note: This recall supersedes recall 13V-383, in which some vehicles were only inspected, sealed, and did not have both arms replaced. The affected vehicles were previously recalled under 13V-383, but did not have both rear suspension arms replaced at that time. Those vehicles need to have both arms replaced as part of this recall remedy.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2006-2012 RAV4 vehicles manufactured July 28, 2005, to December 19, 2012, and 2012-2014 RAV4 EV vehicles manufactured July 24, 2012, to August 29, 2014. In the event of a frontal collision, the rear seat belts for the outboard seats may be cut by the seat cushion frame.
Risk and remedy
Risk
A cut seat belt may not properly restrain the seat occupant, increasing their risk of injury in a crash.
Remedy
Toyota will notify owners, and dealers will install a protector over both rear seat cushion frames, free of charge. The recall began on June 24, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0F.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2009-2012 RAV4 vehicles manufactured October 27, 2008, to December 19, 2012 and 2012-2014 RAV4 EV vehicles manufactured July 24, 2012, to August 29, 2014. In the affected vehicles, water may drip onto the joint that connects the wiper linkage to the wiper motor.
Risk and remedy
Risk
Over time, the dripping water may cause corrosion and wear at the joint, potentially resulting in the separation of the wiper linkage. Once this occurs, the wipers would not function, reducing driver visibility and increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the water diverter channel. In addition, a new wiper linkage with a wiper motor crank arm will be installed. The wiper linkage will have a protective cover over the wiper linkage joint to minimize water splash and a retainer ring to prevent the wiper arm from separating from the wiper motor. The recall began on November 7, 2016. Owners may contact Toyota's customer service number at 1-800-331-4331.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota is recalling certain model year 2006 through 2011 RAV4 and 2010 Lexus HS250h passenger vehicles manufactured from October 2005 through September 2010. If the nuts for adjusting the rear wheel alignment are improperly tightened during service, the rear suspension arm (rear tie rod) may develop unwanted movement and rust leading to thread damage and…
Risk and remedy
Risk
Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will inspect the tie rods and replace any that have rust or corrosion on the alignment adjustment threads. All of the rear tie rods will then be encased in an epoxy to prevent future environmental damage. Due to limitations in parts, the recall remedy will be launched in phases from September 2013 through mid-April 2014. All owners will receive notification of the recall, with most receiving second notifications when parts are available in their area. IMPORTANT: This recall supersedes Toyota and Lexus recall 12V-373. All vehicles that have been inspected and remedied under the previous recall need to be re-inspected and have the appropriate remedy applied.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota is recalling certain model year 2006 through 2011 RAV4 and 2010 Lexus HS250h passenger vehicles manufactured from October 2005 through September 2010. If the nuts for adjusting the rear wheel alignment are improperly tightened during service, the rear suspension arm (rear tie rod) may develop unwanted movement and rust, leading to thread damage and…
Risk and remedy
Risk
Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will inspect the rear tie-rod nut for looseness and replace any suspect tie-rod found loose. Dealers will also affix instructions in multiple places to prevent improper servicing in the future. The recall began on November 30, 2012. Owners may contact Toyota at 1-800-331-4331 or Lexus at 1-800-255-3987.
Toyota IS recalling certain model year 2008 through 2011 lexus lx570, 2003 through 2009 toyota 4runner, and 2006 through 2010 RAV4 vehicles. the accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.
Risk and remedy
Risk
A stuck open accelerator pedal may result in very high vehicle speeds and make it difficult to stop the vehicle, which could cause a crash, serious injury or death.
Remedy
The remedy IS now available. the safety recall began early april 2011. The remedy will involve modification or replacement of the accelerator pedal and replacement of any toyota all-weather floor mat. owners may contact toyota at 1-800-331-4331 or lexus at 1-800-255-3987.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2005-2010 avalon, model year 2007-2010 camry, model year 2009-2010 corolla, corolla matrix, RAV4, model year 2010 highlander, model year 2008-2010 sequoia, and model year 2007-2010 tundra vehicles. due to the manner in which the friction lever interacts with the sliding surface of the accelerator pedal inside the…
Risk and remedy
Risk
The accelerator pedal may become hard to depress, slow to return to idle, or, in the worst case, mechanically stuck in a partially depressed position, increasing the risk of a crash.
Remedy
Dealers will install a reinforcement bar in the accelerator pedal which will allow the pedal to operate smoothly. gm will notify owners for the pontiac vibe please see 10v-018. this service will be performed free of charge. the safety recall IS expected to begin on february 5, 2010 and will be completed on march 15, 2010. owners may contact toyota at 1-800-331-4331.
Owner complaints
400 complaints57 involved a crash3 involved a fire27 injuries
What owners report most
Latest complaints
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2010 Toyota Rav4. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 111,000, and at the time of registration, it was discovered that the mileage was 290,055.
- Forward collision avoidance › Warnings · Lane departure › Warning · Unknown or other
I totaled my car into a fence
- Power train
I was about to accelerate on a main avenue, made a clunking sound and came to a halt. Couldn't pull over safely. Investigated by mechanic, said the Transmission exploded, and the differential gears broke. No warning lights.
- Suspension
The contact owns a 2010 Toyota Rav4. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 13V383000 (Suspension) in 2015. The contact stated that in 2015 while driving at an undisclosed speed, the low tire pressure warning light illuminated. The contact took the vehicle to…
The contact owns a 2010 Toyota Rav4. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 13V383000 (Suspension) in 2015. The contact stated that in 2015 while driving at an undisclosed speed, the low tire pressure warning light illuminated. The contact took the vehicle to a tire dealer, and it was determined that the rear tires were worn and needed to be replaced. The contact replaced all four tires. The vehicle was repaired. The contact stated that in 2020 the low tire pressure and the traction control warning light illuminated. The contact had taken the vehicle to another tire dealer who diagnosed the vehicle and determined that the rear tires were worn and needed to be replaced. The contact was advised that the rear tires could not be aligned because of the rear suspension arms, that was causing the quick wear of the tires. The vehicle was repaired. The vehicle was taken to a tire dealer in 2024 and observed that the low tire pressure and traction control warning lights were illuminated. The contact stated that the vehicle was shaking while driving at various speeds prior to the warning lights being illuminated. The contact was informed that the rear tires could not be aligned due to a failure with the rear suspension arms. The vehicle was repaired. The manufacturer was informed of the failure and advised the contact to take the vehicle to a dealer. The contact took the vehicle to a local dealer who aligned the front wheels, but the rear tires could not be aligned. The contact informed the dealer about NHTSA Campaign Number: 13V383000 (Suspension) and was informed that the recall had been completed. The failure mileage was approximately 86,000.
- Structure › Body
The paint on hood is rusty and corroded, this can affect the body of the vehicle since it exposes the metal and can pose a safety problem. Toyota had a recall for 2010 white paint well the same thing happen to mine which is metallic gray. I have another car from another brand from 2012 and paint…
The paint on hood is rusty and corroded, this can affect the body of the vehicle since it exposes the metal and can pose a safety problem. Toyota had a recall for 2010 white paint well the same thing happen to mine which is metallic gray. I have another car from another brand from 2012 and paint is intact just faded which is normal but not corroded. I contacted Toyota and they refuse to take my complaint. They only gave me a claim number 250808001898 for record
- Engine
Burns oil. No leaks and compression is spot on. Burns oil so bad that around every 2,000 miles, if you hit the brakes to hard it causes the car to stall. Whether it's in a parking lot or intersection. Has happened several times. Since I purchased the car in 2022. Has been inspected by Toyota mechanics on more than one occasion, but can't find any solution, have tried thicker oils, oil stabilizers and nothing helps.
- Engine · Suspension
Engine oil is burning with out discharging from the engine. Can find no leak anywhere in the engine compartment. Constantly adding oil to the car as the oil indicator isn’t working either. The engine compression is spot on to manufacturers specifications. If the engine runs out of oil it could…
Engine oil is burning with out discharging from the engine. Can find no leak anywhere in the engine compartment. Constantly adding oil to the car as the oil indicator isn’t working either. The engine compression is spot on to manufacturers specifications. If the engine runs out of oil it could lead to a crash. Suspension: Loud popping in the rear drivers side when first moving. Don’t know if it is tie rod or something else. Don’t need whatever is causing the pop to break as that could lead to a crash.
- Service brakes
The contact owns a 2010 Toyota RAV4. The contact stated that while driving at an undisclosed speed and approaching a stop light, with the brake pedal depressed to the floorboard the vehicle failed to stop as intended. As a result, the contact rear-ended the vehicle ahead. The air bags did not…
The contact owns a 2010 Toyota RAV4. The contact stated that while driving at an undisclosed speed and approaching a stop light, with the brake pedal depressed to the floorboard the vehicle failed to stop as intended. As a result, the contact rear-ended the vehicle ahead. The air bags did not deploy. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. A police report was filed and injuries were not reported. The manufacturer was not notified of the failure. The failure mileage was 113,000.
- Suspension
NHTSa CAMPAIGN ID 16v596000 AUG 12, 2016 Recalls supercedes 13V-383 vehicles inspected but did not have both arms replaced. Vehicles need to have both arms replaced. Recall done on vehicle (RAV4 2010) were COJ - 1/9/2013 Stevens Creek Toyota CSJ - 9/21/2014 Capitola Toyota Control Arm were…
NHTSa CAMPAIGN ID 16v596000 AUG 12, 2016 Recalls supercedes 13V-383 vehicles inspected but did not have both arms replaced. Vehicles need to have both arms replaced. Recall done on vehicle (RAV4 2010) were COJ - 1/9/2013 Stevens Creek Toyota CSJ - 9/21/2014 Capitola Toyota Control Arm were not replaced at these times. My car is currently being serviced at IQ Autoworks in Campbell CA. I've been told the control arm needs replacement. Quoted $1700 to replace one control arm.
- Steering · Vehicle speed control
Steering becomes very hard to control with no slack and in the wheel and occasionally it feels like you hit ice and sliding when you change lanes, happens on dry paved road without warning. Also when using cruise control hitting button to slow down the headlights and dash lights fade out and then brighter when acceleration
- Visibility › Sun/moon roof assembly
The contact owns a 2010 Toyota RAV4. The contact stated while driving at an undisclosed speed, the moon roof glass fractured without impact. The local dealer was contacted and an appointment was scheduled. The vehicle was not yet diagnosed or repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 187,000.
- Suspension · Unknown or other
I just purchased a used 2010 toyota rav 4 base fwd and when making left or right turn I hear loud clunking noises and when backing up I hear squeaking noises plus I see liquid under car near middle. I also noticed when I add washer fluid and check level couple days later without using it ,,it is…
I just purchased a used 2010 toyota rav 4 base fwd and when making left or right turn I hear loud clunking noises and when backing up I hear squeaking noises plus I see liquid under car near middle. I also noticed when I add washer fluid and check level couple days later without using it ,,it is not visible ...and can't find pink coolant in stores that is in resivoir which needs to be topped off according to mechanic
- Engine · Power train
Transmission vavle body issue and not safe to drive
- Seat belts
Driver belt seat loose
- Electrical system · Engine · Fuel/propulsion system
I have a 2010 Toyota rav4 limited and sometimes the car starts and sometimes it doesn’t but all the light come on but the car itself doesn’t start I replaced the battery, starter, starter safety switch but it still doesn’t start sometimes
- Air bags
Impact on Right front end at 60 mph and air bags did not deploy
- Unknown or other · Vehicle speed control
On August 10 2022 I was pulling slowly into a parking spot with foot lightly on brake to control forward motion car attempted to surge /accelerate . I stepped firmly on brake and since car was nearly stopped I put it in to park. RPM's went up dramatically and then car reverted to normal rpms. I…
On August 10 2022 I was pulling slowly into a parking spot with foot lightly on brake to control forward motion car attempted to surge /accelerate . I stepped firmly on brake and since car was nearly stopped I put it in to park. RPM's went up dramatically and then car reverted to normal rpms. I estimate that the entire process.I estimate that the entire process took place in about 30 seconds or less. I immediately took vehicle to the Toyota dealer and they presumably checked it out and found no problems with vehicle. They "deemed it accidental accelerator pedal engagement by customer" which it was definitely not! A similar situation occurred about 3 months earlier. That time I was pulling slowly into traffic and suddenly car tried to accelerate. I pressed firmly on brake pedal and acceleration stopped. Entire event was very brief seconds and I ignored it as a possible anomaly not requiring attention. I reported that to dealer as well when I took it in for the 10 August incident.
- Engine and engine cooling
The contact owns a 2010 Toyota RAV4. The contact stated that she gets her vehicle maintenance on a regular basis, however, when she took her vehicle to get serviced by an independent mechanic she was advised that the oil was low. The contact stated that they put oil in the vehicle, however, when it…
The contact owns a 2010 Toyota RAV4. The contact stated that she gets her vehicle maintenance on a regular basis, however, when she took her vehicle to get serviced by an independent mechanic she was advised that the oil was low. The contact stated that they put oil in the vehicle, however, when it was time for the vehicle to get maintenance again, she was again advised that the oil was low and that the vehicle was leaking oil. The contact stated that after a while she noticed she was inputting 3 quarts of oil per week in the vehicle. The contact stated that there were no warning lights illuminated on the vehicle at the time of failure. The contact stated that she does not know if the vehicle was losing oil until she checks the oil, which occurs on a regular basis. The contact stated she did contact the manufacturer, who was not able to assist. The failure mileage was 200,000.
- Engine · Unknown or other
While driving my vehicle, it began to smoke under the hood. I exited the highway in order to pull over in a safer location. Some smoke started coming through the vent in the car as I pulled over. I exited the car and moved away and small flames began at the air vents on the outside. After I called…
While driving my vehicle, it began to smoke under the hood. I exited the highway in order to pull over in a safer location. Some smoke started coming through the vent in the car as I pulled over. I exited the car and moved away and small flames began at the air vents on the outside. After I called 911, The fire kept building until the front half of the car was engulfed. The fire department came and put out the fire. They weren’t sure the exact cause, but believe it started in the engine. My car was up to date on inspection and was not yet due for an oil change. No dashboard service lights were on beforehand. I had State Farm insurance and am not sure yet if they were able to find anything from their investigation.
- Engine and engine cooling › Cooling system › Radiator assembly · Power train › Driveline › Differential unit · Suspension
The contact owns a 2010 Toyota RAV4. The contact stated that while driving at an undisclosed speed, the vehicle made abnormal sounds. The vehicle was taken to the dealer, but the dealer could not duplicate the failure. The vehicle was taken to another dealer, Nashville Toyota North (2400 Gallatin…
The contact owns a 2010 Toyota RAV4. The contact stated that while driving at an undisclosed speed, the vehicle made abnormal sounds. The vehicle was taken to the dealer, but the dealer could not duplicate the failure. The vehicle was taken to another dealer, Nashville Toyota North (2400 Gallatin Pike N, Madison, TN 37115), and diagnosed that the rear differential coupling was leaking oil, the rear driver's side axle bearing was faulty, and the radiator was leaking. The rear differential coupling, rear driver's side axle bearing, and radiator needed to be replaced. The vehicle was not repaired and remained at the dealer. The manufacturer was made aware of the failure and informed the contact that the vehicle was past the nine-year extended warranty coverage. The failure mileage was 97,900.
- Tires
My tires are a 225/65R17. repeatedly, in heavy rain or very wet snow, the tires on mounted on the driver's side hydroplane and lose traction. I am concerned that this problem is due to the design of the tread. This is a directional tire that is only designed for the right side of the vehicle.…
My tires are a 225/65R17. repeatedly, in heavy rain or very wet snow, the tires on mounted on the driver's side hydroplane and lose traction. I am concerned that this problem is due to the design of the tread. This is a directional tire that is only designed for the right side of the vehicle. Tires mounted on the Left side of the vehicle channel water/wet snow toward the center of the tire, causing them to hydroplane under these conditions. All other road conditions: ice, light rain, snow, dry roads, the tires are noisy but do not lose traction
- Unknown or other
I was operating the vehicle on 09/25/2021 and at approximately 9:45am, the car accelerated quickly causing me to lose control of the vehicle and crash into a guard rail. I was driving about 35-40 miles per hour and the vehicle took off out of no where and the car wouldn't brake. It was extremely frightful and I am lucky that the guard rail was in place, otherwise the vehicle would of flipped over or worse.
- Steering
[XXX] Hi, My name is [XXX]i. I own a 2010 Toyota RAV4. Which I had bought from roseville Toyota dealership. On Sunday afternoon, I was driving back to my home from South Lake Tahoe. I drove for almost 40 miles and suddenly the steering got locked while I was driving the car. There was no prior…
[XXX] Hi, My name is [XXX]i. I own a 2010 Toyota RAV4. Which I had bought from roseville Toyota dealership. On Sunday afternoon, I was driving back to my home from South Lake Tahoe. I drove for almost 40 miles and suddenly the steering got locked while I was driving the car. There was no prior indication of steering lock lights before I start the car. The steering got locked suddenly in a winding road. I called Geico roadside assistance and towed the car and it is with Thomsons Toyota, placerville, ca. The dealer told me that they found issue with alternator and battery. The reason I am reporting this issue is it should have steering lock light turned on before I start the car, so that it could avoid potential accident situation. Request you to please investigate in this. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
- Electrical system › Alternator/generator/regulator
The contact owns a 2010 Toyota RAV4. The contact stated while driving 35 mph, the steering wheel inadvertently locked and the vehicle loss power. The steering warning light was illuminated. The contact stated he was able to veer to the side of the road while driving downhill. The vehicle was towed…
The contact owns a 2010 Toyota RAV4. The contact stated while driving 35 mph, the steering wheel inadvertently locked and the vehicle loss power. The steering warning light was illuminated. The contact stated he was able to veer to the side of the road while driving downhill. The vehicle was towed to the dealer who diagnosed that the alternator needed to be replaced. The manufacturer was made aware of the failure and informed the contact that they could not provide any assistance as the vehicle was out of warranty. A case was opened. The vehicle was not repaired. The approximate failure mileage was 162,000.
- Engine · Suspension
This car was bought for a new driver and we have had 2 separate occasions when she has gotten somewhere and the car wont start. All the warning lights come on, but will not do anything when you push the button. We can jump it and it will start. This is not safe for a young person that could get…
This car was bought for a new driver and we have had 2 separate occasions when she has gotten somewhere and the car wont start. All the warning lights come on, but will not do anything when you push the button. We can jump it and it will start. This is not safe for a young person that could get stranded at random somewhere, and is now afraid to take it somewhere. We have checked the connections and the battery has been checked and is fine. The other complaint is the rear suspension recall. The tires were rotated and now it has a vibration, I was told that because of the recall it cannot be aligned unless things are replaced because of the terrible fix job on the recall. If something is recalled it should be fixed correctly and not be a bandaid job. There should not be a cost associated with a cheap fix that caused more problems. We purchased this vehicle because of reputation, if they are not supporting their product, then it will go and no other toyota products will be purchased.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Unintended and Uncontrolled Acceleration
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested…
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested information regarding potential electronic causes of unintended acceleration in Toyota and Lexus vehicles.I. Pedal Interference from Floor mats, Carpet Covers and Plastic Pads in Carpets.During the RQ10-003 investigation, ODI reviewed a large volume of documents to assess whether additional vehicles should be recalled.Following the agency's analysis, NHTSA requested that Toyota recall additional vehicles.Toyota complied with the agency's request.The details of these recalls are set forth more fully in Toyota's reports to NHTSA pursuant to 49 CFR Part 573.These recalls are as follows:Recall 11V-112: (1) model year (MY) 2004-2006 Toyota Highlander and Highlander Hybrid; and, (2) MY 2004-2007 Lexus RX330,RX350, and RX400h (hybrid model). The total estimated population under this recall is 769,379 vehicles.This recall remedies potential accelerator pedal entrapment caused by a loose floor carpet cover (trim panel). Recall 11V-113: (1) MY 2003-2009 through 2009 Toyota 4Runner; (2) MY 2006-2010 Toyota RAV4; and, (3) MY 2008-2011 Lexus LX570.The total estimated population under this recall is 1,381,000 vehicles.This recall supplements recall 09V-388 and remedies potential accelerator pedal entrapment by an unsecured floor mat.Recall 11V-115: (1) MY 2006-2007 Lexus GS300 (all wheel drive vehicles); and, (2) MY 2006-2007 Lexus GS350 (all wheel drive vehicles). The total estimated population under this recall is 19,647 vehicles.This recall remedies potential accelerator pedal entrapment caused by inadequate clearance between the pedal linkage and a plastic pad embedded in the vehicle's carpet.II. Potential Electronic Causes of Unintended Acceleration.After NHTSA opened RQ10-003, NHTSA launched a ten-month study of potential electronic causes of unintended acceleration in Toyota vehicles.NHTSA launched the study in the spring of 2010 in light of concerns aired in Congressional hearings.NHTSA enlisted engineers at the National Aeronautics and Space Administration (NASA) with expertise in areas such as computer controlled electronic systems, electromagnetic interference and software integrity to assess whether electronic systems or electromagnetic interference played a role in incidents of unintended acceleration in Toyota vehicles.That study has concluded.Two reports are associated with the study and are available on NHTSA's website.NASA's report is entitled Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, NESC Assessment No. TI-10-00618 (Jan. 18, 2011).NHTSA's report is entitled Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems (Feb. 2011).Both reports should be read in conjunction with each other. As stated in its report, NASA did not find an electronic cause of large throttle openings that can result in unintended acceleration incidents. NHTSA did not find a vehicle-based cause of unintended acceleration incidents other than the physical pedal interference causes that are being addressed by Toyota's recalls. This RQ is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211826CSP: Customer Support Program ZKG - Paint Repair Process Operation Flow Chart
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10204546DL: CUSTOMER SUPPORT PROGRAM ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
Every Toyota RAV4 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.