2011 Toyota RAV4
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › RAV4 › 2011
These records cover every 2011 Toyota RAV4. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2011 Toyota RAV4. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2006-2011 Toyota RAV4 vehicles manufactured October 31, 2005, to September 7, 2010, and 2010 Lexus HS250h vehicles manufactured July 6, 2009, to August 26, 2010. The affected vehicles have rear suspension arms (rear tie rods) with adjusting lock nuts that may have been…
Risk and remedy
Risk
Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners and dealers will replace both rear suspension arms and encapsulate the locknuts, free of charge. The recall began on September 30, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are G0V for Toyota vehicles and GLK for Lexus vehicles. Note: This recall supersedes recall 13V-383, in which some vehicles were only inspected, sealed, and did not have both arms replaced. The affected vehicles were previously recalled under 13V-383, but did not have both rear suspension arms replaced at that time. Those vehicles need to have both arms replaced as part of this recall remedy.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2006-2012 RAV4 vehicles manufactured July 28, 2005, to December 19, 2012, and 2012-2014 RAV4 EV vehicles manufactured July 24, 2012, to August 29, 2014. In the event of a frontal collision, the rear seat belts for the outboard seats may be cut by the seat cushion frame.
Risk and remedy
Risk
A cut seat belt may not properly restrain the seat occupant, increasing their risk of injury in a crash.
Remedy
Toyota will notify owners, and dealers will install a protector over both rear seat cushion frames, free of charge. The recall began on June 24, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0F.
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window…
Risk and remedy
Risk
If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy
Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2009-2012 RAV4 vehicles manufactured October 27, 2008, to December 19, 2012 and 2012-2014 RAV4 EV vehicles manufactured July 24, 2012, to August 29, 2014. In the affected vehicles, water may drip onto the joint that connects the wiper linkage to the wiper motor.
Risk and remedy
Risk
Over time, the dripping water may cause corrosion and wear at the joint, potentially resulting in the separation of the wiper linkage. Once this occurs, the wipers would not function, reducing driver visibility and increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the water diverter channel. In addition, a new wiper linkage with a wiper motor crank arm will be installed. The wiper linkage will have a protective cover over the wiper linkage joint to minimize water splash and a retainer ring to prevent the wiper arm from separating from the wiper motor. The recall began on November 7, 2016. Owners may contact Toyota's customer service number at 1-800-331-4331.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota is recalling certain model year 2006 through 2011 RAV4 and 2010 Lexus HS250h passenger vehicles manufactured from October 2005 through September 2010. If the nuts for adjusting the rear wheel alignment are improperly tightened during service, the rear suspension arm (rear tie rod) may develop unwanted movement and rust leading to thread damage and…
Risk and remedy
Risk
Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will inspect the tie rods and replace any that have rust or corrosion on the alignment adjustment threads. All of the rear tie rods will then be encased in an epoxy to prevent future environmental damage. Due to limitations in parts, the recall remedy will be launched in phases from September 2013 through mid-April 2014. All owners will receive notification of the recall, with most receiving second notifications when parts are available in their area. IMPORTANT: This recall supersedes Toyota and Lexus recall 12V-373. All vehicles that have been inspected and remedied under the previous recall need to be re-inspected and have the appropriate remedy applied.
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota…
Risk and remedy
Risk
An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy
Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013…
Risk and remedy
Risk
If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy
Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Toyota is recalling certain model year 2006 through 2011 RAV4 and 2010 Lexus HS250h passenger vehicles manufactured from October 2005 through September 2010. If the nuts for adjusting the rear wheel alignment are improperly tightened during service, the rear suspension arm (rear tie rod) may develop unwanted movement and rust, leading to thread damage and…
Risk and remedy
Risk
Failure of the rear tie rod could cause a loss of vehicle control, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will inspect the rear tie-rod nut for looseness and replace any suspect tie-rod found loose. Dealers will also affix instructions in multiple places to prevent improper servicing in the future. The recall began on November 30, 2012. Owners may contact Toyota at 1-800-331-4331 or Lexus at 1-800-255-3987.
Toyota IS recalling certain model year 2011 RAV4 vehicles, manufactured from november 24, 2011, through december 19, 2011. in the curtain shield airbags, propellant with the incorrect specification was used for the initiator assembled in the airbag inflator. in this condition, the inflator may not perform properly, causing one or both curtain shield…
Risk and remedy
Risk
In the event of a crash, the airbags may not deploy and will not be able to properly protect an occupant, increasing the risk of injuries.
Remedy
Toyota will notify owners, and dealers will check the vehicle identification number to identify the curtain shield assemblies and replace the assemblies as necessary with new ones free of charge. the safety recall began on march 8, 2012. owners may contact toyota at 1-800-331-4331.
Owner complaints
287 complaints44 involved a crash8 involved a fire20 injuries
What owners report most
Latest complaints
- Air bags
Airbag light is on
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Toyota Rav4. The contact discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the mileage was 89,000. It was later discovered upon checking the Carfax report that the mileage was 230,000.
- Suspension
The contact owns a 2011 Toyota Rav4. The contact stated that while driving at various speeds, there was an abnormal clunking sound coming from the rear end of the vehicle. The contact stated that the vehicle felt as if the rear suspension had failed. The vehicle was taken to a certified mechanic…
The contact owns a 2011 Toyota Rav4. The contact stated that while driving at various speeds, there was an abnormal clunking sound coming from the rear end of the vehicle. The contact stated that the vehicle felt as if the rear suspension had failed. The vehicle was taken to a certified mechanic, who determined that the rear suspension arms were detaching from the subframe. The dealer was contacted and informed the contact that the vehicle was previously included in TSB: 0042-14, NHTSA ID Number: 10060729 (Suspension), and was repaired in 2013. The contact was informed that the VIN was not included in NHTSA Campaign Number: 16V596000 (Suspension), and the campaign had since expired in 2019; and the repair was not covered. The vehicle was not repaired. The manufacturer was made aware of the failure, and it was confirmed that the campaign had expired. The failure mileage was approximately 195,000.
- Vehicle speed control · Vehicle speed control › Cruise control
The contact owns a 2011 Toyota Rav4. The contact stated that while driving and depressing the brake pedal to come to a complete stop, the vehicle continued to accelerate unintendedly. The contact continuously depressed the brake pedal and shifted to neutral(N), and the vehicle responded as…
The contact owns a 2011 Toyota Rav4. The contact stated that while driving and depressing the brake pedal to come to a complete stop, the vehicle continued to accelerate unintendedly. The contact continuously depressed the brake pedal and shifted to neutral(N), and the vehicle responded as intended. The contact stated that the failure recurred while at a complete stop and while reversing from the driveway onto the roadway. The failure only occurred while the cruise control was activated but not set. The contact previously owned another 2011 Toyota Rav4 vehicle, which also experienced the failure. An independent mechanic informed the contact that the manufacturer had previously provided a remedy for the failure. The dealer and the manufacturer were not contacted. The vehicle was not diagnosed or repaired. The failure mileage was approximately 135,000.
- Structure › Body
I bought a pre-own car for my daughter in November 2022 from CARMAX in the City of Colma, California. The car is white color 2011 Toyota Rav4. In March 2025, my daughter started noticing the paint peeling off from the roof and driver side front panel. I found out that the paint issue is due to the…
I bought a pre-own car for my daughter in November 2022 from CARMAX in the City of Colma, California. The car is white color 2011 Toyota Rav4. In March 2025, my daughter started noticing the paint peeling off from the roof and driver side front panel. I found out that the paint issue is due to the defects from manufacturer when I visited paint shop to repair. I did researched online and found out Toyota had Customer Support Program until December 2022 for the issue. I contacted Toyota Corporate office but was told that CSP has ended and nothing they can do. Even though I am now aware that CSP has ended in December 2022, I found that it is unfair for the owner whose car just started exhibiting the issue after the program ended especially for the second owner like me who has never received any notice about the issue and bought the Toyota believing it will be a good investment. Can you please look into the issue and help for those owner like me who are unfairly left out? The attached picture shows the current condition of my car for your reference.
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Toyota Rav4. The contact discovered that there was a mileage discrepancy after the purchase. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 146,000. It was later discovered, upon checking with the local State Secretary, that the mileage was 190,000.
- Steering
Electric power steering problem, steering wheel is very stiff and wont return to center ,car is very difficult to drive, I have read that nhtsa issued some safety recalls on 2011 toyota rav4 related to this mfg. defect in the circut board -ecu -electronic control unit in the electric power steering , I purchased this used car on 9/17/2025 .I am taking it to Toyota dealer 10/9/2025
- Seat belts
The contact's sister owns a 2011 Toyota Rav4. The contact stated while the vehicle was at the dealer for a service appointment, the dealer performed the recall repair of NHTSA Campaign Number: 16V096000(Seat Belts); however, after the recall repair, the seat belts became inoperable. The dealer was…
The contact's sister owns a 2011 Toyota Rav4. The contact stated while the vehicle was at the dealer for a service appointment, the dealer performed the recall repair of NHTSA Campaign Number: 16V096000(Seat Belts); however, after the recall repair, the seat belts became inoperable. The dealer was made aware of the failure and informed the contact that a diagnostic fee was required. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and a case was filed. The contact was advised to take the vehicle back to the dealer. The failure mileage was 120,000.
- Electrical system · Vehicle speed control
The contact owns a 2011 Toyota Rav4. The contact stated while reversing to park the vehicle, the vehicle unintendedly accelerated. The contact depressed the brake pedal, and the vehicle stopped. The contact stated that after turning off the vehicle and entering the residence, the vehicle…
The contact owns a 2011 Toyota Rav4. The contact stated while reversing to park the vehicle, the vehicle unintendedly accelerated. The contact depressed the brake pedal, and the vehicle stopped. The contact stated that after turning off the vehicle and entering the residence, the vehicle independently restarted. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 80,000.
- Tires
235/55R 18 I took my car for a tire rotation at a tire shop. I was told that the right front tire was not good so I asked to be replace with another new tire I had, which was exactly the same Yokohama tire my car had on. When I drove off the shop the tire started making a weird loud noise so I…
235/55R 18 I took my car for a tire rotation at a tire shop. I was told that the right front tire was not good so I asked to be replace with another new tire I had, which was exactly the same Yokohama tire my car had on. When I drove off the shop the tire started making a weird loud noise so I drove back to the shop. They switch the tire to the rear and there I noticed that was a different tire, not the new tire I have provided them. I asked the guys where my tire was and why they had switched it with an old-use worn tire. They denied doing so and refused to give me back my tire. Besides putting a used-worn out tire, the tire also has a different speed rate than the rest of my tires. Since it is raining in Houston and having different speed tires is itself dangerous, I found this improper and in disregard of putting my safety in danger. My tire was a Yokohama Brand; The shop switched it to a worn-used Dimax brand with a different speed.
- Engine
A lot oil consumption from oil change to 1000 miles 4 quarts of oil consumption no warning light until car stops I’m been charging oil every 4 k miles now I have to check oil every day is been almost 4years with this problem
- Electrical system · Engine
I understand there is a recall on Rav4 starting fire from 2013. Our vehicle is a 2011 and started on fire in our driveway and is a total loss. May need to include other years.
- Engine · Fuel/propulsion system
After pressing the accelerator pedal, I released the pressure on the pedal because of traffic and the accelerator continued to accelerate. had to hold the brake pedal down and then shifted to Park and shutoff engine. When restarted the car operate normally. This has happened in the past and is…
After pressing the accelerator pedal, I released the pressure on the pedal because of traffic and the accelerator continued to accelerate. had to hold the brake pedal down and then shifted to Park and shutoff engine. When restarted the car operate normally. This has happened in the past and is very scary and unsafe. My internet research on problem shows that there have been two problems associated with this occurrence. One, accelerator trapped by floor mats and the second was because the accelerator pedal could "stick". The floor mats are secured by manufacture securing systems so it must be the in the sticking pedal. I am contacting Toyota but not optimistic...is there anything the NHTA can do for Toyota at least checking my car for a sticking accelerator pedal sticking. Finally, has there been any other reports of this happening?
- Unknown or other
Everything working
- Air bags
I bought my RAV4 in May 2018, and it currently has just under 100,000 miles. My local mechanic says he "was kneeling on the driver's seat while reinstalling the center console after replacing the e-brake cable, when the side curtain air bags deployed!" He is frantic as this has never happened…
I bought my RAV4 in May 2018, and it currently has just under 100,000 miles. My local mechanic says he "was kneeling on the driver's seat while reinstalling the center console after replacing the e-brake cable, when the side curtain air bags deployed!" He is frantic as this has never happened before, and his shop insurance won't cover the replacement costs. I know that insurance companies tend to "total" cars after air bags have deployed. Have you ever heard of such an incident with the recalled 2011 RAV4 air bags?
- Seat belts · Visibility/wiper
Unknown
- Engine · Vehicle speed control
The contact owns a 2011 Toyota Rav4. The contact stated while stopped at a red light with the brake pedal depressed, the vehicle accelerated and rolled forward. The contact quickly put the vehicle in park and was able to pull over down the road. The contact stated that while pulling over and then…
The contact owns a 2011 Toyota Rav4. The contact stated while stopped at a red light with the brake pedal depressed, the vehicle accelerated and rolled forward. The contact quickly put the vehicle in park and was able to pull over down the road. The contact stated that while pulling over and then shifting from park to drive with the brake pedal depressed, the vehicle accelerated, and the contact quickly shifted back into park. There were no warning lights illuminated. The vehicle was left in front of an independent mechanic shop. The independent mechanic diagnosed that the canister purge valve needed to be replaced and the throttle body needed servicing. The vehicle was repaired. The dealer was not made aware of the failure. The manufacturer was not made aware of the failure. The failure mileage was approximately 193,751.
- Power train · Structure › Frame and members
The contact owns a 2011 Toyota Rav4. The contact stated while driving at slow speeds, there was a loud banging sound coming from the rear of the vehicle. Upon inspection, it was discovered that the subframe was severely rusted and the rear differential fluid was leaking from the vehicle. The cause…
The contact owns a 2011 Toyota Rav4. The contact stated while driving at slow speeds, there was a loud banging sound coming from the rear of the vehicle. Upon inspection, it was discovered that the subframe was severely rusted and the rear differential fluid was leaking from the vehicle. The cause of the failures was not yet determined. The manufacturer was notified of the failures, but no assistance was offered. The local dealer was not contacted. The failure mileage was 111,000.
- Air bags
Side curtain airbag failed to deploy in side-impact crash. Passenger suffered significant concussion and broken ribs.
- Fuel/propulsion system · Service brakes · Steering
To begin with, the 2011 Toyota Rav4 in question was a loaner provided to me by Fiore VW AUDI (1000 S. Logan Blvd in Hollidaysburg, PA 16648) at @ 10:45 AM on 9/16/23. My 2018 Toyota Sienna was being serviced at this location on 9/18/23 and they provided me the 2011 Rav4 in the meantime. The brakes…
To begin with, the 2011 Toyota Rav4 in question was a loaner provided to me by Fiore VW AUDI (1000 S. Logan Blvd in Hollidaysburg, PA 16648) at @ 10:45 AM on 9/16/23. My 2018 Toyota Sienna was being serviced at this location on 9/18/23 and they provided me the 2011 Rav4 in the meantime. The brakes failing, the steering wheel locking up, and the sudden acceleration of this 2011 Rav4 occurred later that afternoon @ 4 PM in a Sheetz parking lot at 3261 W. College Ave. State College, PA 16801. As I was turning left into an open parking space at the rear entrance of this Sheetz, I began to turn the steering wheel to the right, straighten out, and park properly in the parking space; I also began to press down on brake to stop the car. As I pressed down on the brake pedal, the brakes quickly locked up and became unresponsive. Simultaneously, the steering wheel locked up becoming unresponsive with the front wheels still slightly turned to the left. I was still coming out of my turn when this vehicle failure began. I quickly took my foot off the brake, then the car suddenly burst forward with an intense acceleration. I immediately put my foot back down on the brake, but the car still proceeded forward towards the building; moving slightly to the left due to the steering wheel still locked in place and unresponsive. I slowly rolled into a metal obstruction at the end of the parking space, hitting it at an angle. I had my seat belt on and no air bags were deployed. No injuries to me, but some cosmetic damage to the front of the Rav4. There were no warning lights or audible warnings prior to this vehicle failure. I didn't notice any warning lights or alarms during the failure. Prior to this incident everything seemed fine. After the incident, I drove the car home, drove it to my insurance agent on 9/18/23, and I drove it back to the dealer on 9/20/23. That was it. I would believe Sheetz has this complete incident recorded w/security cameras at that back entrance way.
- Service brakes · Vehicle speed control
Sudden acceleration when braking caused crash of 2011 Toyota RAV4 and driver injury. Making a right turn into a parking space that faces a concrete wall, I had my foot on the brake to slow the car down to park, going about five miles an hour. Still riding the brake, never having moved my foot off…
Sudden acceleration when braking caused crash of 2011 Toyota RAV4 and driver injury. Making a right turn into a parking space that faces a concrete wall, I had my foot on the brake to slow the car down to park, going about five miles an hour. Still riding the brake, never having moved my foot off it, when I was about two feet from the wall I pressed on the brake to ease into a stop. Instead, the car suddenly accelerated with a loud rev and crashed into the wall. The car was going so fast the airbag deployed and thrust me against my seatbelt. Airbag caused fracture of 5th metacarpal in my right hand. Was unable to drive for 12 weeks. When I got the car back from the Toyota Body Shop ($9000+ in repairs), I took it over to the dealer and began filing a case with the Toyota Customer Experience Center to have Toyota inspect the car. I am especially concerned about the brake sensor system. Case is pending
- Steering
In hot weather the steering wheel sticks and is hard to turn and will not allow car to straighten up after the turn.
- Forward collision avoidance › Automatic emergency braking · Service brakes
For the past three months, in increasing frequency, whenever parking, firm pressure on brake pedal engages sudden burst of acceleration, with engine loudly revving at 1000 revs or higher (audibly beyond the cabin to passers by on the street), that lurches vehicle forward.Within close spaces of…
For the past three months, in increasing frequency, whenever parking, firm pressure on brake pedal engages sudden burst of acceleration, with engine loudly revving at 1000 revs or higher (audibly beyond the cabin to passers by on the street), that lurches vehicle forward.Within close spaces of parking garage pillars or walls or while parallel parking this is a hazard and threatens sudden accident of 1 mph or less up to 5-10 mph and a 1-2 yard-long jerking lurch to try to recover from. This occurred, twice this week, and 4 times within past 3 months’ time, to where this is no longer a fluke or due to my immediate reactions. This is an increasing pattern that threatens myself and others. I am headed to local dealership, within the hour, to request diagnostics and to attempt to have technician repeat this issue.
- Service brakes, air · Vehicle speed control
The contact owns a 2011 Toyota Rav4. The contact stated that while driving approximately 25 mph, the vehicle in front of her abruptly stopped for an animal that jumped onto the road, as a result, the vehicle accelerated and crashed into the rear of a Toyota Prius. The brake pedal was continuously…
The contact owns a 2011 Toyota Rav4. The contact stated that while driving approximately 25 mph, the vehicle in front of her abruptly stopped for an animal that jumped onto the road, as a result, the vehicle accelerated and crashed into the rear of a Toyota Prius. The brake pedal was continuously depressed. The "low tire" message was displayed. The driver sustained injuries to her knee, neck, and chest, and medical attention was provided. There was not a report of any fire, air bag deployment, or police report being filed. The vehicle was taken to her residence. The vehicle was towed to the collision center. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 143,000.
- Seat belts
Driver's side rear passenger seat belt keeps getting jammed in the intake storage and hard to nearly impossible to engage. Had it fixed a few times but passengers continue to have difficulty pulling the seat belt from its storage position.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Autoliv Air Bag Propellant Mixture
The summary for this investigation, labeled EQ12-002 Autoliv Closing Resume, can be found attached separately to this resume.This EQ is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
- 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10224108TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220183TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10220158DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10211826CSP: Customer Support Program ZKG - Paint Repair Process Operation Flow Chart
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10208995TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10204546DL: CUSTOMER SUPPORT PROGRAM ZKG Multiple Models and Model Years Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color Coverage for Peeling of Factory-Applied Paint
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
Every Toyota RAV4 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.