1998 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 1998
These records cover every 1998 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 1998 Toyota Sienna. Newest first.
Toyota IS recalling certain model year 1998 through 2010 sienna passenger vehicles manufactured between august 7, 1997 and january 4, 2010, currently registered in or originally sold in connecticut, delaware, illinois, indiana, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode…
Risk and remedy
Risk
The cable may break due to excessive corrosion and the spare tire may separate from the vehicle, possibly resulting in a vehicle crash.
Remedy
Toyota will notify owners with an interim letter initially instructing them to bring their vehicle to authorized dealers to inspect for corrosion. a second notice will be sent when the permanent remedy IS available. for more information, please see toyota's amended recall report of july 19, 2010. the safety recall IS expected to begin on october 12, 2010. owners may contact toyota at 1-800-331-4331.
Equipment description: aftermarket theft deterrent systems used on 1998-1998 toyota RAV4, avalon, and sienna model vehicles distributed by southeast toyota distributors, inc. in the states of alabama, florida, georgia, north and south carolina. the alarm wiring harness plugs into the vehicle's ignition switch and the vehicle's ignition switch wiring…
Risk and remedy
Risk
This condition can cause intermittent performance of the vehicle's electrical components such as the dash warning lights and/or hvac fan speed controls. also, the vehicle may not run smoothly and could stall.
Remedy
Dealers will inspect the date code label on the security system harness and any displaying the manufacturing/final date code will be replaced with newly produced harnesses. the date codes are: RAV4 - 6/24/98, 6/25/98, 6/26/98; sienna - 6/25/98, 6/26/98; and avalon - 6/30/98, 7/1/98, 8/31/98, 9/1/98, 9/2/98, and 9/3/98.
Vehicle description: sport utility vehicles, MINI vans and passenger vehicles equipped with a theft deterrent systems (tds) supplied by audiovox corporation and distributed by southeast toyota distributors, inc. in the states of alabama, florida, georgia, north and south carolina. the alarm wiring harness plugs into the vehicle's ignition switch and the…
Risk and remedy
Risk
This condition can cause intermittent performance of the vehicle's electrical components such as the dash warning lights and/or hvac fan speed controls. also, the vehicle may not run smoothly and could stall.
Remedy
Dealers will inspect the date code label on the security system harness and any displaying the manufacturing/final date code will be replaced with newly produced harnesses. the date codes are: RAV4 - 6/24/98, 6/25/98, 6/26/98; sienna - 6/25/98, 6/26/98; and avalon - 6/30/98, 7/1/98, 8/31/98, 9/1/98, 9/2/98, and 9/3/98.
Owner complaints
294 complaints18 involved a crash3 involved a fire17 injuries
What owners report most
Latest complaints
- Service brakes, hydraulic › Power assist › Vacuum · Steering
steering component that breaks, causing a driver to lose control.
- Steering
Gear shifter mount unit on the steering column broke apart, stranding the vehicle in the middle of the road.
- Air bags
Air bags did not deploy in a front end collision. we were traveling at about 65mph on the interstate when another vehicle lost control, wrecked, and came to a complete stop in our lane and facing us. My husband braked hard but we could not avoid the vehicle. We truly have no idea how fast we were…
Air bags did not deploy in a front end collision. we were traveling at about 65mph on the interstate when another vehicle lost control, wrecked, and came to a complete stop in our lane and facing us. My husband braked hard but we could not avoid the vehicle. We truly have no idea how fast we were going at impact but I would guess 30-40 mph. It had just started raining lightly prior to the accident. Seat belts and god saved us. No major injuries.
- Service brakes · Suspension
Started to get clunking/rattling noises on highway that sounded like it was coming from front left driver's side. reduced speed to 50 mph. about 5 miles from home brake light came on. pulled over and found brake fluid leaking around front drivers side tire (about 9PM). slowly drove to mechanic…
Started to get clunking/rattling noises on highway that sounded like it was coming from front left driver's side. reduced speed to 50 mph. about 5 miles from home brake light came on. pulled over and found brake fluid leaking around front drivers side tire (about 9PM). slowly drove to mechanic about 2 miles away and left car overnight. returned next morning and examined brake fluid reservoir. found very little fluid in reservoir - distributed across the entire bottom. mechanic reported the front strut mounting failed (apparently a problem with these cars). After failing the strut punctured the bottom of the brake fluid reservoir (about 3/8" hole) at one of the corners (see photo) allowing the fluid to drain. should I have lost almost all fluid with a 2 circuit braking system? does the reservoir have an internal baffle to prevent almost total lose of fluid? I am the original owner and have all maintenance receipts.
- Electrical system
TL* the contact owns a 1998 toyota sienna. The contact stated that the warning indicators on the instrument panel did not function when the vehicle reached high temperatures. The contact stated that only the check engine warning indicator functioned. The vehicle was not diagnosed or repaired. The…
TL* the contact owns a 1998 toyota sienna. The contact stated that the warning indicators on the instrument panel did not function when the vehicle reached high temperatures. The contact stated that only the check engine warning indicator functioned. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The contact referenced nhtsa campaign number: 98v278000 (electrical system); however, the vin was not completed. The failure mileage was not provided.
- Electrical system
Horn worked intermittently and now not at all.
- Steering
Car started making clunking noises when turning the steering wheel. Took it to a mechanic who test drove it and examined the steering. He validated the clunking noise and said he found the steering rack was broken at the mount and needs to be replaced to drive the car safely.
- Power train
Since I bought my 1998 used toyota sienna with 190xxx miles, when press a litte bit the gas pedal on a uphill it start to accelerate like crazy, I can barely stop it, I must to put the transmission in neutral to stop the van, today I was on a very pronuntiated uphill and almost crash because it…
Since I bought my 1998 used toyota sienna with 190xxx miles, when press a litte bit the gas pedal on a uphill it start to accelerate like crazy, I can barely stop it, I must to put the transmission in neutral to stop the van, today I was on a very pronuntiated uphill and almost crash because it accelerates itself when press a little the gas pedal. I''m scared to use the van again but I don't have other choise and at the same time I'm scared to sell the van to someone else. *tr
- Power train
The car IS shifted from park to drive and it accelerates suddenly without me pressing the accelerator. Pressing the brakes do not stop the car, the only way to stop it IS by shifting into park or neutral. *tr
- Structure · Tires
It appears that toyota has created artificial obstacles to prevent my obtainment of an eligible reimbursement for recall (safety recall A9E - tire carrier cable) repairs. In response to the recall notice I had the cable inspected then contacted toyota in accordance with the recall letter but I was…
It appears that toyota has created artificial obstacles to prevent my obtainment of an eligible reimbursement for recall (safety recall A9E - tire carrier cable) repairs. In response to the recall notice I had the cable inspected then contacted toyota in accordance with the recall letter but I was denied reimbursement. On october 2, 2013 I wrote to toyota following the inspection and attached the original work order from a toyota dealer for the replacement of part number "51900-08010" as required. I received an october 17TH response saying I needed to provide answers to three questions:reason the vehicle brought into the repair facility; the repair facility diagnoses, and the repair performed in order to correct the concern. After several telephone calls to toyota customer service and again having the current cable reinspected, obtaining and forwarding copies of the repair order, proof of payment, and ownership of the vehicle for repair work performed by a toyota dealership using an identical part number for reimbursement eligibility, I was directed to contact the manager at the dealership and obtain written information on the cause of the breakage that occurred nearly ten years earlier and that I needed to contact him because he was not responding to the corporate customer service office. I sent a letter, dated january 20, 2014, to him but never even received an acknowledgement. Although I've done everything required, sometimes more than once, had repairs completed using the proper part number, as shown on the repair worksheet issued by a toyota dealer, I've been denied reimbursement due to toyota's own dealership repair manager's lack of cooperation. If the repairs were not due to the cable breakage and if the replacement part was not needed, why did the toyota dealership do the repair and charge me for it? Copies - letters and receipts will be provided, if needed. *tr
- Structure › Body
TL* the contact owns a 1998 toyota sienna. The contact received a notification related to nhtsa campaign ID number 10v160000(structure) and stated that the repair was not taken care of in a reasonable amount of time. The dealer indicated parts were not available. The contact had not experienced a failure. The manufacturer was contacted.
- Electrical system · Engine · Power train
I came home and turned my ignition switch off but my 1998 toyota van kept running.turning the key on and off did not turn it off. I tried shutting it down with the ignition switch again and again and again. I tried turning it off again while moving the gear selector lever but to no avail. I begin…
I came home and turned my ignition switch off but my 1998 toyota van kept running.turning the key on and off did not turn it off. I tried shutting it down with the ignition switch again and again and again. I tried turning it off again while moving the gear selector lever but to no avail. I begin to smell burning rubber. I lifted the hood and realized the engine was being turned over by the starter which was not disengaging and starting to smoke. Then tons of smoke began boiling off the starter. I disconnected the positive battery connection and the engaged starter stopped cranking the engine. Heavy smoke continued boiling from the starter for about a minute longer. I was very glad I was not inside the garage because I think the starter could have started a fire or the smoke would have smothered me. *tr
- Tires
Tire seemed out of balance at narrow range of speeds (60-65mph), but smooth at 68mph for months; recently noticed vehicle rocking when cold and at low speeds; today saw an outward bulge in rear tire tread (directionally outward from axle). am seeking a replacement tire before tread separation. *tr
- Air bags · Seat belts
Driver in wrong lane hit my van, with most of impact on right front side of van. both vehicles were totalled in collision. Right front passenger seat belt initially held, but released during collision and passenger ended up on driver's armrest. neither airbag deployed. *tt
- Air bags · Electrical system › Horn · Vehicle speed control
I have a 1998 toyota sienna recently the airbag light IS on and the horn and cruise control are not working I wonder if this can be a safety recall for the life of the vehicle or do I just have to pay for the repair. *Tr
- Latches/locks/linkages
1998 toyota sienna cannot lock and unlock both rear sliding doors electronically from the lock-and-unlock buttons of the front drive and passenger car doors. *Tr
- Latches/locks/linkages · Structure › Body › Door
The push-button on the inside of the sliding side-doors fails to release. In the case the door IS unlocked, this prevents to door from closing. If the door IS locked, the button does not release, keeping the door from being unlocked and thus the door cannot be opened. *Tr
- Electronic stability control (esc) · Vehicle speed control
On august 25, 2010, I was taking my grandchildren to rainbow station daycare in our toyota sports van sienna XLE, 1998. warrenton toyota dealer in virginia performed a full 100,000-mile service on van on july 10, 2010. I turned into the parking lot of the day care at a speed of 5 mph with my…
On august 25, 2010, I was taking my grandchildren to rainbow station daycare in our toyota sports van sienna XLE, 1998. warrenton toyota dealer in virginia performed a full 100,000-mile service on van on july 10, 2010. I turned into the parking lot of the day care at a speed of 5 mph with my foot on the brake. While I was about to park the car, there was unintended sudden acceleration of the car and car went from parking lot to sidewalk and began going towards the office of the daycare. I turned the steering to the right as far as I could in order to get away from the entrance of the daycare and the lobby (both have a glass wall) and was trying to get back to the parking lot the car would not stop. I tried to push the brake as hard as I could but the car would not stop instead it left car tire track marks on the sidewalk and the front lawn of the daycare. the car finally hit the brick wall and stopped. fortunately the grandchildren were safe. my right hand wrist bone (radius) was broken. I had to undergo surgery. our car was totaled and IS beyond repair. Toyota IS trying to find out he cause of accident. *Tr
- Latches/locks/linkages · Structure › Body › Door
The push-button on the inside of the sliding side-doors fails to release. In the case the door IS unlocked, this prevents to door from closing. If the door IS locked, the button does not release, keeping the door from being unlocked and thus the door cannot be opened. this can be remedied by sliding a flat blade under the button to release it. This affects the 1998 toyota sienna. *Tr
- Electrical system
Wiring problem--electric going on unusual paths--pushing the brake turns on the lights in the dash--i wonder if pushing the brake could cause acceleration problems? *Tr
- Electrical system · Vehicle speed control
Tl*the contact owns a 1998 toyota sienna. While attempting to start the vehicle, it suddenly accelerated and the engine continued running. The vehicle was taken to an authorized dealership where the contact was informed that the failure could not be duplicated. The current and failure mileages were…
Tl*the contact owns a 1998 toyota sienna. While attempting to start the vehicle, it suddenly accelerated and the engine continued running. The vehicle was taken to an authorized dealership where the contact was informed that the failure could not be duplicated. The current and failure mileages were approximately 100,000. the consumer stated when the vehicle was first started after sitting overnight, the engine would rev high even though the gear was in park. the consumer stated he then removed the key from the ignition. However, the vehicle would continue running. Updated 06/22/10. *Jb
- Vehicle speed control
What happened to the prius in california the same did happen to us back in 1999 with our toyota sienna van. My wife was driving on I-5 in oregon. She pressed the gas pedal to overtake a car and then when she pressed the brake to slow down the brakes didn't work. She drove into the hwy median fence…
What happened to the prius in california the same did happen to us back in 1999 with our toyota sienna van. My wife was driving on I-5 in oregon. She pressed the gas pedal to overtake a car and then when she pressed the brake to slow down the brakes didn't work. She drove into the hwy median fence to stop the car. When we contacted toyota, they didn't admit any fault with their car (the same what they are doing now) and told us it was our fault that we do not know how to use their brakes. We have several cars but we didn't have a problem with other cars. I didn't buy a toyota after that crash but I am also worried who else the part supplier has been supplying parts to. I can be reached at [xxx] . information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *Tr
- Vehicle speed control
My daughter was driving a toyota sienna, supervised by my wife. at a traffic light waiting to make a left turn, the van accelerated onto oncoming traffic causing a head-on collision. the van was totalled and the air bags deployed. no one was hurt but the oncoming car was also a toyota, speeding…
My daughter was driving a toyota sienna, supervised by my wife. at a traffic light waiting to make a left turn, the van accelerated onto oncoming traffic causing a head-on collision. the van was totalled and the air bags deployed. no one was hurt but the oncoming car was also a toyota, speeding through the traffic. I asked that both vehicles be inspected for sudden acceleration. however, the insurance company and police found it easier to blame the accident on my daughter than investigate the vehicles.
- Steering
I bought a toyota sienna my '98 brand new in may 1998 and still own it. this car also has demonstrated a similar problem ever since I bought the car ' veering to right. the driver has to constantly correct the steering in order to keep the car moving straight. even after three attempts in '98…
I bought a toyota sienna my '98 brand new in may 1998 and still own it. this car also has demonstrated a similar problem ever since I bought the car ' veering to right. the driver has to constantly correct the steering in order to keep the car moving straight. even after three attempts in '98, '99, and 2000, respectively, were made to address this problem by a toyota dealer (copy of the paperwork can be furnished upon request), the problem has yet been corrected successfully as of today. this problem increases driving fatigue especially long trips and in turn may increase the chance of auto accidents. *Tr
- Seat belts
I have a 1998 toyota sienna LE. all of the seat belts do not retract back into the panels without help from the passengers. if you lean forward they stay where they are extended to. I have had them looked at and the technician said the return springs have all relaxed. this IS the 4TH toyota automobile I have owned and all of them have done this. I don't know how this can be safe? *Tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Engine seizure
- Steering wheel to return to center
There is no summary currently available
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
- 10143927TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
- 10133915Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
- 10133777Safety Recall completion is important not only in satisfying government requirements but also is an integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners receive the Follow-Up Notice and contact your dealership. Please note the follow-up activity may cause an increase in your current campaign owner appointments. Toyota will continue with additional follow-up activities in the months to come. Please take this into consideration when analyzing your manpower requirements.
- 10133774Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
- 10133720Safety Recall completion is important not only in satisfying government requirements but also is an integral part of our commitment to meet customer expectations of Toyota products. Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. We request your assistance in completing the applicable campaign repairs as owners receive the Follow-Up Notice and contact your dealership. Please note the follow-up activity may cause an increase in your current campaign owner appointments. Toyota will continue with additional follow-up activities in the months to come. Please take this into consideration when analyzing your manpower requirements.
- 10133717Toyota will be sending Safety Recall Follow-Up Notices to remind owners whose vehicles have not yet had campaign repairs completed. Please note the following information for Regional and PD associates.
- 10133649TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10132812Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
- 10132715TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
- 10132708TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
- 10132295This bulletin is now obsolete. Please see T-SB-0054-13.
- 10132287California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
- 10132084The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
- 10132055Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Toyota leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Toyota strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Toyota strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
- 10131993This bulletin is now obsolete. Please see T-SB-0185-13.
- 10131988The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
- 10131984A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
- 10131961Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
- 10131928A key part to maintain the proper function and safe operation of the vehicle's braking system is to perform a visual inspection when installing brake pads, calipers, and discs. The following recommendations are intended to provide general tips for the inspection and/or installation of Toyota Complete Maintenance Care (TCMC) front brake pads and discs. Always refer to the model specific Repair manual and TIS publications for specific repair instructions.
- 10131713TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
- 10123420TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
- 10111416TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE: There are new security provisions required to obtain a Reset Pass-Code. It is critical that the instructions for this new process are reviewed BEFORE attempting to get a Pass-Code in the new system.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.