2006 Toyota Sienna
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Sienna › 2006
These records cover every 2006 Toyota Sienna. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2006 Toyota Sienna. Newest first.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2005-2007 and 2009-2010 Toyota Sienna vehicles. In the affected vehicles, due to a problem within the shift lock assembly, the shift lever may be moved out of the 'Park' position without depressing the brake pedal.
Risk and remedy
Risk
If the shift lever can be moved from the "Park" position without depressing the brake pedal and the parking brake is not applied, the vehicle may roll, increasing the risk of a crash.
Remedy
Toyota will notify owners, and dealers will replace the shift lock solenoid and reapply the grease, free of charge. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is H0V. Vehicles that were previously recalled under campaign 13V-429 are not affected by this recall.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010…
Risk and remedy
Risk
If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
Remedy
SET will notify owners, and dealers will disconnect the seat heaters, free of charge, and refund the purchase price of the seat heater accessory. The recall began on July 14, 2016. Owners may contact SET customer service at 1-866-405-4226. SET number for this recall is SET16B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion…
Risk and remedy
Risk
Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
Remedy
SET will notify owners, and dealers will disconnect the heaters with copper strand heating elements and refund the purchase price of the seat heater accessory, free of charge. The recall is expected to began in January 2015. Owners may contact SET customer service at 1-866-405-4226.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2004-2011 Sienna vehicles originally sold in, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West…
Risk and remedy
Risk
If the carrier cable is corroded due to road salt, the spare tire may separate from the vehicle, increasing the risk of a crash.
Remedy
Toyota sent owners in August 2014 an interim notification to advise owners of the recall and that dealers will perform an interim remedy to remove the spare tire and relocate it to the luggage compartment, free of charge. Owners are being mailed a second letter as parts become available and dealers will replace the spare tire carrier assembly with an improved one, free of charge. The remedy campaign is being performed in phases. The first phase of the recall began July 7, 2015. Owners may contact Toyota customer service at 1-800-331-4331. NOTE: 2004-2010 Siennas subject to this recall were subject to recall campaign 10V-160 initiated in 2010. Those owners are advised that they must have their vehicles remedied again under this campaign and that having the earlier recall completed did not remedy their vehicles. Additionally, model year 1998-2003 Siennas were recalled as part of safety recall 10V-160. Owners of those vehicles that have not had not the remedy performed on their vehicles, should contact their Toyota dealer to schedule a free repair.
Access options IS recalling certain trucks and vans built on ford E150, E350, toyota sienna, and dodge grand caravan chassis and equipped with vmi/ricon 6-WAY power seat bases. The six way power seat base may have a defective (cold) weld on the pivot pin which IS welded to the swivel plate. the weld could fail.
Risk and remedy
Risk
The seat occupant may be injured if the seat base pin were to break.
Remedy
The swivel plate will be replaced free of charge if necessary. the recall began on june 8, 2010. owners may contact access option at 831-722-6804.
Toyota IS recalling certain model year 1998 through 2010 sienna passenger vehicles manufactured between august 7, 1997 and january 4, 2010, currently registered in or originally sold in connecticut, delaware, illinois, indiana, kentucky, maine, maryland, massachusetts, michigan, minnesota, new hampshire, new jersey, new york, ohio, pennsylvania, rhode…
Risk and remedy
Risk
The cable may break due to excessive corrosion and the spare tire may separate from the vehicle, possibly resulting in a vehicle crash.
Remedy
Toyota will notify owners with an interim letter initially instructing them to bring their vehicle to authorized dealers to inspect for corrosion. a second notice will be sent when the permanent remedy IS available. for more information, please see toyota's amended recall report of july 19, 2010. the safety recall IS expected to begin on october 12, 2010. owners may contact toyota at 1-800-331-4331.
Gulf states toyota IS recalling certain model year 2005-2010 vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold between september 1, 2005 and june 2, 2008 without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
This does not meet the standard requirements.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. Dealers will also correct the owner's manual. the safety recall began on may 27, 2010. owners may contact gulf states toyota at 713-580-3300.
Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.
Risk and remedy
Risk
A driver may overload a vehicle which may increase the risk of a crash.
Remedy
Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.
Toyota IS recalling certain model year 2006 through 2009 sienna and 2009 lexus GX passenger vehicles. the vehicle capacity weight on the tire and loading information label and the gvwr on the certification label IS insufficient for certain vehicles. some vehicles were accessorized through vehicle processing centers and had accessories installed that…
Risk and remedy
Risk
The gvwr IS insufficient for the load carrying capacity of the vehicles.
Remedy
Toyota will notify owners instructing them to return their vehicle to a toyota or lexus dealer for an exchange of the certification label and the tire and loading information label, an installation of the load carrying capacity modification label, if necessary, and a correction to the owner's manual. this remedy will be performed free of charge. the safety recall began on december 10, 2009. owners may contact toyota at 1-888-270-9371.
Toyota IS recalling 27,080 model year 2005 through 2010 passenger cars built from september 1, 2005 to may 4, 2009. these vehicles were not equipped with load carrying capacity modification labels which fails to conform with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims."
Risk and remedy
Risk
Incorrect load carrying capacity modification labels could result in the vehicle being overloaded, increasing the risk of a crash.
Remedy
Toyota will notify owners and provide them with a new, accurate label to be installed over the inaccurate label free of charge. the safety recall began on august 18, 2009. owners may contact toyota at 1-888-270-9371.
Toyota IS conducting a safety improvement campaign involving 196,222 my 2004-2006 toyota sienna vehicles equipped with power rear liftgate struts. the gas struts used to help lift and support the rear power liftgate could wear out sooner than expected. as the gas struts deteriorate, the performance of the liftgate will begin to degrade and the power rear…
Risk and remedy
Risk
If not repaired, the gas struts may not be able to support the weight of the liftgate when it IS open eventually, the gas struts could deteriorate to the point that the liftgate will fall about ten inches after it reaches the fully open position, at which point the power motor will engage and power the liftgate to the fully closed position. this condition may cause injury to a person who IS struck by the liftgate when it falls or when it IS closing.
Remedy
Dealers will replace the gas struts with newly designed gas struts that have a longer service life. the campaign began on august 8, 2008, and will be mailed in three phases ending in late december 2008. owners may contact toyota at 1-888-270-9371.
Owner complaints
1,017 complaints37 involved a crash2 involved a fire53 injuries1 deaths
What owners report most
Latest complaints
- Structure
The contact owns a 2006 Toyota Sienna. The contact stated that while the vehicle was at the dealer for a recall repair, the mechanic discovered large holes in the center of the subframe caused by rust. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 218,000.
- Wheels
The TPMS system failed in the ECM or engine computer. It uses the wheel speed sensors on each hub to measure differences in wheel speed and uses this to infer if any one wheel has low tire pressure. (This vehicle does not have TPMS sensors in the wheels.) However, with this failure, it reports a…
The TPMS system failed in the ECM or engine computer. It uses the wheel speed sensors on each hub to measure differences in wheel speed and uses this to infer if any one wheel has low tire pressure. (This vehicle does not have TPMS sensors in the wheels.) However, with this failure, it reports a tire pressure problem even though all 4 tires are inflated properly. This problem persists even after cleaning then replacing wheel speed sensors. The problem appears to be in the ECM or engine computer, which is very difficult and expensive to replace. With this problem, the driver is never able to tell if any tire actually has low pressure because the system always reports that a tire has low pressure. Toyota should be required to fix this issue in all affected vehicles.
- Unknown or other
While driving, there was a recurrent sound like doors locking and unlocking, several dozen times over a half hour drive at 50 miles per hour. When stopped, the passenger side sliding door opened by itself. Luckily, my dogs were in a kennel or they might have jumped out of the car. I closed it and…
While driving, there was a recurrent sound like doors locking and unlocking, several dozen times over a half hour drive at 50 miles per hour. When stopped, the passenger side sliding door opened by itself. Luckily, my dogs were in a kennel or they might have jumped out of the car. I closed it and it opened by itself again. At home, the passenger side sliding door opens when my neighbor presses the button on his key fob to open his non-Toyota pickup truck. It will not open or close when I press the button on my Sienna key fob.
- Tires › Tread/belt
The contact owns a 2006 Toyota Sienna equipped Hercules Tires, Tire Line: Roadtour 855 SPE, Tire Size: 215/65/R16, DOT Number: U96VH260H21. The contact stated while driving 35 MPH during a trip, the steering wheel started shuddering. The vehicle was taken to a tire shop, and the contact was…
The contact owns a 2006 Toyota Sienna equipped Hercules Tires, Tire Line: Roadtour 855 SPE, Tire Size: 215/65/R16, DOT Number: U96VH260H21. The contact stated while driving 35 MPH during a trip, the steering wheel started shuddering. The vehicle was taken to a tire shop, and the contact was informed that the two front tires had sustained tread belt separation and bulges. The two front tires were replaced. Additionally, the contact stated while driving 65-70 MPH, the TPMS warning light illuminated. The vehicle was taken to the tire shop, and the contact was informed that the rear passenger's side tire had sustained tread belt separation, and the metallic belt was poking through the rubber. The contact requested that the rear tires be replaced as a precautionary measure. The rear tires were replaced. All four tires were replacement tires. The dealer and the manufacturer were not notified of the failure. The vehicle failure mileage was 173,414. The tire failure mileage was approximately 16,022. The VIN was not available.
- Unknown or other
I am contacting you regarding Toyota Warranty Enhancement Program – ZE6. This concerns sticky and cracking dashboard and glare from this. I had no idea this existed. I own a 2006 and a 2010 sienna. I have not received any mailers from Toyota regarding either Sienna's . My van's dashboards are…
I am contacting you regarding Toyota Warranty Enhancement Program – ZE6. This concerns sticky and cracking dashboard and glare from this. I had no idea this existed. I own a 2006 and a 2010 sienna. I have not received any mailers from Toyota regarding either Sienna's . My van's dashboards are included in this program. Problem is, I never received notice from Toyota about either dashboard. Is there anything that can be done about this?
- Structure › Body › Hatchback/liftgate › Support device/strut
The contact owns a 2006 Toyota Sienna. The contact stated that while the vehicle was parked, the liftgate was opened and raised; however, the liftgate failed to remain open and raised as intended. The contact stated that when the liftgate was raised, the liftgate independently fell due to faulty…
The contact owns a 2006 Toyota Sienna. The contact stated that while the vehicle was parked, the liftgate was opened and raised; however, the liftgate failed to remain open and raised as intended. The contact stated that when the liftgate was raised, the liftgate independently fell due to faulty liftgate struts. The vehicle was not diagnosed or repaired by an independent mechanic. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to report the failure to the NHTSA Hotline. The failure mileage was unknown. The VIN was unavailable.
- Steering · Unknown or other · Vehicle speed control
My vehicle steering/control has frozen a few times in the past 18-24 mos. This happens for me in wet conditions at slow speeds while trying to turn, usually to the right. The car also seems to slow on its own and pull to the side at these times. This has also happened while reversing out of a…
My vehicle steering/control has frozen a few times in the past 18-24 mos. This happens for me in wet conditions at slow speeds while trying to turn, usually to the right. The car also seems to slow on its own and pull to the side at these times. This has also happened while reversing out of a parking spot. I do not recall seeing any lights engage but I am more focused on steering the car safely and exterior factors at these times so I haven't noticed the dashboard. It feels like the power steering fails, and I have no control. Thankfully, I have not been moving at high rates of speed, nor been in a position to go into the lane of on-coming traffic or had someone in a lane near me, and have been able to hold in position or manually turn as much as needed. Steering seems to return once the turn is complete. I have been fearful of hitting someone or being hit from behind each time. My mechanic has been unable to recreate the experience and was unable to suggest a direct answer. I see others have had similar experiences and the same lack of answers from even Toyota. Having come across this website and seeing responses here to this exact problem I have had, I am hoping for more information or a recall soon!
- Power train · Service brakes · Steering
Bought the van used last year. Previous owner said mechanic could not diagnose the issue. On slight curves similar to on-ramps while accelerating the Vehicle stability control (VSC) will engage unexpectedly, sound an alarm and jerk the steering wheel. Some times to the point of pulling the vehicle…
Bought the van used last year. Previous owner said mechanic could not diagnose the issue. On slight curves similar to on-ramps while accelerating the Vehicle stability control (VSC) will engage unexpectedly, sound an alarm and jerk the steering wheel. Some times to the point of pulling the vehicle out of its lane. Road speed is decreased dramatically as it feels as though the ABS is engaging. This has happened to me at least half a dozen times since June 2023. The condition will continue for maybe five or ten seconds until the wheel is straightened and speed reduced. Searching the Internet seems it's a fairly common problem. The fix might be to replace the steering rack or disable the VSC system. It's reported by those experiencing the issue get little to no help from the dealerships which strikes me as quite strange... From what I've read it seems to affect 2004-2009 Siennas
- Power train
The bushing for the gear shift is broken causing the lever to disconnect from the cord preventing the vehicle from shifting gears. This caused the vehicle to become stuck in reverse. The car was stuck in reverse when attempting to shift to drive, nearly causing my wife to crash into another…
The bushing for the gear shift is broken causing the lever to disconnect from the cord preventing the vehicle from shifting gears. This caused the vehicle to become stuck in reverse. The car was stuck in reverse when attempting to shift to drive, nearly causing my wife to crash into another vehicle. There are multiple videos on YouTube demonstrating this problem, it is a known issue. The vehicle/component has not been manufactured. No warning lamps, messages or other symptoms.
- Service brakes · Unknown or other
Vehicle traction control system will activate around a curve and break the vehicle while the traction control warning system activates. Breaking around a curve in a wet road situation can be very risky. Numerous other Toyota owners have filed similar complaints.
- Electrical system · Service brakes · Vehicle speed control
The vehicle stability control system randomly engages and activates the brakes without cause. This can happen on a gentle curve going under the speed limit. It is very scary and I am afraid it is going to cause an accident. Internet research shows many owners with this issue and no information on the cause or a fix
- Service brakes · Steering · Unknown or other
Slip light indicator comes on and alarm goes off, while anti-lock brakes engage. This is happening while I'm driving on the highway never in the city. The car starts pulling to the right sometimes almost pulling me off the road. The road conditions are completely normal and dry no gravel in it no…
Slip light indicator comes on and alarm goes off, while anti-lock brakes engage. This is happening while I'm driving on the highway never in the city. The car starts pulling to the right sometimes almost pulling me off the road. The road conditions are completely normal and dry no gravel in it no reason whatsoever for the anti-lock brakes to start engaging. When this first started happening it only happens on curves while I was driving approximately 35 mph. After a couple of months it started happening also while I was driving approximately 70 miles an hour going straight on a dry road. It almost pulled me off into a ditch. The steering is affected I can barely steer but I have managed to keep the car on the road. This is now happening more frequently. I was almost pulled into another car to my right once. At first it was only every couple of months but now I had it happen twice in about a hundred mile trip. There's no way I can get a mechanic to have this happen because you can't predict when it will happen and many miles it won't happen. It is very very dangerous and I'm afraid to take my Toyota sienna on the highway now. After researching it I have found that many people are having this trouble with their Toyota Sienna's there needs to be a recall or a repair. Apparently Toyota mechanics have replaced all kinds of things in the Sienna's but nothing has fixed the problem.
- Suspension
This is a Braun Side Entry Rampvan Conversion. In 2008 there was a safety bulleting 34238 in which I took the vehicle in for inspection and any corrections. On January 19,2023 the rear axle mount broke off while driving. The vehicle was inspected by my insurance company, who denied my claim saying…
This is a Braun Side Entry Rampvan Conversion. In 2008 there was a safety bulleting 34238 in which I took the vehicle in for inspection and any corrections. On January 19,2023 the rear axle mount broke off while driving. The vehicle was inspected by my insurance company, who denied my claim saying it was a result of wear and tear. The car fax report states it is a total loss due to flooding, which I am in the process of disputing. The cost to repair is several thousand dollars. Do I have any recourse regarding my vehicle. I had the vehicle serviced at Toyota for some normal mtce December 22 & 14th total cost of $3000.00, and there was no mention from them that there was an issue, which could have caused an accident.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
Every time I go around a curve, the ABS TRC and vehicle beeps like I'm sliding. It happens on every curve. Its very dangerous. I have unplugged the sensor under the front passenger seat and all problems go away. i have replaced this part and it still has not fixed the problem. with part…
Every time I go around a curve, the ABS TRC and vehicle beeps like I'm sliding. It happens on every curve. Its very dangerous. I have unplugged the sensor under the front passenger seat and all problems go away. i have replaced this part and it still has not fixed the problem. with part unplugged i have no ABS TRC Airbags none of the safety equipment is working while unplugged, but is safer than having my brakes slammed in every curve.
- Service brakes, air › Antilock › Abs warning light
The contact owns a 2006 Toyota Sienna. The contact stated that she heard a strange noise while decelerating and the brake pedal failed to engage. There were no warning lights. The contact continued to depress the brake pedal with force until the antilock braking system engaged but failed. The…
The contact owns a 2006 Toyota Sienna. The contact stated that she heard a strange noise while decelerating and the brake pedal failed to engage. There were no warning lights. The contact continued to depress the brake pedal with force until the antilock braking system engaged but failed. The vehicle was towed to an independent mechanic where the brake pump was replaced but the failure recurred. The contact then had the brake pump replaced for a second time, but the failure recurred. The vehicle was towed to another independent mechanic where it was diagnosed that the ABS needed to be replaced and the contact was advised to take the vehicle to a dealer. The dealer was notified of the failure and informed the contact to take the vehicle back to the independent mechanic. The manufacturer was not notified of the failure. The failure mileage was approximately 90,000.
- Forward collision avoidance › Automatic emergency braking · Service brakes
Vehicle Trac Control/ABS system engages periodically especially on winding roads between speeds of 30-60mph. Trac Control alarm goes off and vehicle pumps brakes automatically, then resolves. This is extremely dangerous especially when roads are wet/icy or when being followed too closely by another…
Vehicle Trac Control/ABS system engages periodically especially on winding roads between speeds of 30-60mph. Trac Control alarm goes off and vehicle pumps brakes automatically, then resolves. This is extremely dangerous especially when roads are wet/icy or when being followed too closely by another vehicle. Tried replacing front right wheel speed sensor but problem persists. Research shows this is a chronic problem with Sienna vans and needs to be repaired or guidance provided by Toyota on how to resolve before someone gets hurt. Please help!
- Electrical system · Forward collision avoidance › Automatic emergency braking · Vehicle speed control
While driving vehicle on dry, non slippery roads with slight to moderate curves, vehicle illuminates Traction Loss light, sounds alarm buzzer, and at times applies brakes and dethrottles engine, even when no loss of traction has occurred. This happens while driving on straight roads with slight…
While driving vehicle on dry, non slippery roads with slight to moderate curves, vehicle illuminates Traction Loss light, sounds alarm buzzer, and at times applies brakes and dethrottles engine, even when no loss of traction has occurred. This happens while driving on straight roads with slight unevenness. Had to disconnect wheel speed sensor harness to disable ABS/VSC system. When this happens, the vehicle automatically applies brakes to certain wheels and dethrottles the engine, this can pull the vehicle to one side sharply and can cause an accident.
- Air bags
Airbag warning light intermittently flashes, upon personal research on owner forums this is a common issue that is most commonly fixed by wiggling or disconnecting/reconnecting the airbag sensor wiring below the front seats.
- Air bags
Airbag system warning light due to failing connector under the front passenger seat. Code 44 / B0111. See Toyota T-SB-0069-12. This is a pattern failure in a critical safety system.
- Wheels
Swollen lug nuts. Won’t fit any wrench. Affects ability to remove a tire in case of needing to repair a flat tire.
- Steering · Unknown or other
My Toyota Sienna XLE 2006 VSC and ABS comes on when I drive uphill or downhill mostly when I steer to the left. This is a situation common on freeway ramps in or out. When this happens the car slows down abruptly beeps a loudly. This is an issue reported by many owner of that vehicle model across several years.
- Service brakes
I've had multiple instances of driving along at varying speeds ranging from 35 to 65 mph, where the traction control kicked in abruptly, the slip indicator lights come on along with the traction control light on the dashboard, a beeping sound occurs, and the van brakes suddenly on its own. This…
I've had multiple instances of driving along at varying speeds ranging from 35 to 65 mph, where the traction control kicked in abruptly, the slip indicator lights come on along with the traction control light on the dashboard, a beeping sound occurs, and the van brakes suddenly on its own. This has happened on dry pavement without any reason for traction control to kick in whether I'm driving straight or going around a curve. It is very dangerous and I've stopped driving the vehicle since I often drive with my 3 young children and I fear for our safety.
- Service brakes · Steering
When driving on a curve traveling about 30 to 45 MPH. The traction control engages in perfectly dry road conditions. It automatically brakes and jerks the car one way or the other. Very dangerous, especially since you're traveling on a curve when it most often happens and you basically lose your…
When driving on a curve traveling about 30 to 45 MPH. The traction control engages in perfectly dry road conditions. It automatically brakes and jerks the car one way or the other. Very dangerous, especially since you're traveling on a curve when it most often happens and you basically lose your ability to control the vehicle. I won't even let my wife drive the car. There's no known remedy for this problem and I can't even sell the car.
- Unknown or other
The back hatch power struts will not hold up the hatch. These are the replacement struts from the first recall. The hatch will open up and then automatically begin to close. Any attempt to access the back of the van results in the hatch closing down on my head. I have read online that many other…
The back hatch power struts will not hold up the hatch. These are the replacement struts from the first recall. The hatch will open up and then automatically begin to close. Any attempt to access the back of the van results in the hatch closing down on my head. I have read online that many other Sienna owners are having the same issue with the replacement struts. There needs to be another recall. The cost of replacing the "replacement struts" is nearly $800. This is a faulty part from Toyota; they should be held responsible.
- Electrical system · Service brakes · Unknown or other
Vehicle shut off when going over the drain pipe I rolled it into a gas station turned it on and off switched gears and it started to roll back on drive I tried to move the gears and turned off the the vehicle after ward no gear worked.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Stabilus Rear Liftgate Struts Failing
Please see the attached closing resume summary.It has been attached to this document as a PDF.
- Steering intermediate shaft binding
Odi's analysis of warranty data shows that the alleged defect has occurred in just 0.2 percent of the subject vehicle population.when the analysis IS limited to salt-belt states, the rate IS still well below one percent of the population (0.4 percent).in addition, tests conducted by odi and toyota have shown that the…
Odi's analysis of warranty data shows that the alleged defect has occurred in just 0.2 percent of the subject vehicle population.when the analysis IS limited to salt-belt states, the rate IS still well below one percent of the population (0.4 percent).in addition, tests conducted by odi and toyota have shown that the alleged defect has a minimal affect on steering efforts.odi interviews of owners who experienced the alleged defect indicated that in most cases the problem was preceded by months or years of noise or a gradual increase in steering efforts in the initial steering maneuvers after first starting a cold vehicle.the subject vehicles have been in service for 4 to 5 years with no crashes or injuries associated with the alleged defect.toyota's technical service bulletin provides assistance to service technicians in the early diagnosis and repair of the alleged defect condition. Accordingly, this investigation has been closed. The closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist.the agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.for additional information regarding this engineering analysis refer to the ea08-024 closing report.
- Unexpected closing of power liftgate
On may 30, 2008, toyota initiated a safety recall to replace the liftgate struts in approximately 196,000 model year 2004-2006 toyota sienna vehicles equipped with power liftgates (recall 08v-244).the recall will provide the opportunity for vehicle owners to obtain new struts that are more robust.based on these…
On may 30, 2008, toyota initiated a safety recall to replace the liftgate struts in approximately 196,000 model year 2004-2006 toyota sienna vehicles equipped with power liftgates (recall 08v-244).the recall will provide the opportunity for vehicle owners to obtain new struts that are more robust.based on these actions, the agency has decided to close the investigation.while toyota has not made a decision that the recalled vehicles contain a safety-related defect, in view of the recall, further use of the agency's resources does not appear to be warranted.the closing of this investigation does not constitute any finding by nhtsa.the agency reserves the right to take further action if warranted by the circumstances.additional information can be found in the engineering analysis report.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
- 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10204571TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10203532TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
- 10197492Warranty enhancement program.
- 10197491Warranty enhancement program.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10197472Technician Certification Requirements.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10182983TT: Some customers may encounter Bluetooth connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
Every Toyota Sienna model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.